LS1088A is a cost-effective, powerefficient, and highly integrated
SoC device featuring eight extremely power-efficient 64-bit ARM
Cortex-A53 cores with ECC-protected L1 and L2 cache memories for
high reliability, running up to 1.6 GHz.
This patch is to add ls1088a SoC support in TF-A.
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Id9ebcdad1beab07ea81a41955edd4f471d6cf090
Refine the code to be compatible with new CCN504 which is used
by ls2088a.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I2e2b3bbb9392862b04bf8a89dfb9575bf4be974a
Support CHASSIS 3.0(such as SoC LS1088A).
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I60843bc4d604f0de1d91c6d3ad5eb4921cdcc91a
Add base address definiton for Chassis 3 platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I6041b93c9e9bb49af60743bd277ac7cc6f1b9da8
Set the receiver gain to max value to recover
cold temp marginality issue for phy-gen2
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: If639fa3ed404cf6e1b8abcc2b7137db1fdd0b2c2
Fix build issue of mmap_add_ddr_region_dynamically():
ls_bl2_el3_setup.c:(.text.bl2_plat_preload_setup+0x28): undefined
reference to mmap_add_ddr_region_dynamically
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I74a8b4c2337fc0646d6acb16ce61755c5efbdf38
Update WA for Errata A-050426 as Commands for
PEX (PEX1..PEX6) , lnx1_e1000#0, lnx1_xfi and
lnx2_xfi has been moved to PBI phase.
This patch requires RCW to include PBI commands
to write commands in BIST mode for PEX, lnx1_e1000,
lnx1_xfi and lnx2_xfi IP blocks.
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Change-Id: I27c2b055c82c0b58df83449f9082bfbfdeb65115
Increate SoC name length as it is not enough for some
SoC personalities.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I2142b4b5162dd3c9ab3afefcdc859063836d8bcc
Added some RCPM2 register offset definiton for register: IPSTPCR,
IPSTPACKR and POWMGTDCR, also added OVRD bit definiton of register
POWMGTDCR.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I301bc1401e053c2089b5eb3672c6e649c805a2ab
total_dram_size should be signed value because it is equal to return
value of init_ddr(), so if it is lower or equal zero, report
error as DDR is not initialized correctly.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Idbc40da103f60f10cb18c5306e97b764c1a9d372
Add helper function to disable the load-store prefetch.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I36d7be37e0b800ab1e5842a56cfd04d779338868
Use long instead of long long on aarch64 for 64_t stdint types.
Introduce inttypes.h to properly support printf format specifiers for
fixed width types for such change.
Change-Id: I0bca594687a996fde0a9702d7a383055b99f10a1
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
In order to enable OCRAM ECC, it need to be initialized
with 64-bit writes and then a write performed to address
0x0010_0534 with the value 0x0000_0008.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Id7d4f5df65ca52f24e9251c08a75ad2006451b95
Define default SD buffer address and size in DRAM.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I5872d95b0c1114e05f0e145756e9a6ef39b2fd9a
SoC code can define supported features, otherwise use default setting.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I0f11498c1f7558ff0ec2d9b344f3f7a4f5489ced
Define common register macro both for Cortex-A53 and Cortex-A72
because the code will be used by both Cortex platform.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I485661bfe3ed4f214c403ff6af53dc6af1ddf089
Add CCI and EPU base address definiton for Chassis v3.2.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I13250555b6646c1e7ba2e9d7c9efca8501f17b3a
1. Refined struct soc_info_t definition.
2. Refined get_soc_info function.
3. Fixed some SVR persernality value.
4. Refined API to get cluster numbers and cores per cluster.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I3c20611a523516cc63330dce4c925e6cda1e93c4
Use a unfied API soc_errata() for each platforms,
add print a INFO message for each enabled errata,
so that it will be easy to check which errata is
enabled on current platform.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I5eab3f338db6b46c57cbad475819043fc60ca6d3
Will add more Erratas, some errata can be used for multiple
platforms, so move errata to be common code which can
be share between different platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Ib149b3eac365bdb593331e9f38f0b89d92c9c0d1
1. Added the build macro "add_boot_mode_define".
2. Use the macro to validate current BOOT_MODE against the
pre-determined list of SUPPORTED_BOOT_MODE, so each platform
need to define the list: SUPPORTED_BOOT_MODE.
3. Reports error if BOOT_MODE is not in SUPPORTED_BOOT_MODE list,
or BOOT_MODE is not supported yet althoug it is in SUPPORTED_BOOT_MODE.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I29be60ecdb19fbec1cd162e327cdfb30ba629b07
Move some soc make variables to new soc_common_def.mk,
then it can be reused by other platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Ia30bd332c95b6475f1cfee2f03a8ed3892a9568d
Move some common make variables to new plat_common_def.mk,
then it can be reused by other platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I37bd65b0f8124f63074fa03339f886c2cdb30bd3
For NXP platforms:
- Setup files for BL2 and BL31
- Other supporting files.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I36a1183a0652701bdede9e02d41eb976accbb017
NXP: Added warm reset handler to handle SMC PSCI_SYSTEM_RESET2
raised from kernel (> 5.4).
As part of first cold boot, DDR training data is stored in NV storage.
As part of this SMC handling, following things are done:
- DDR is put in self-refresh mode to retain the content of DDR.
- Reset cause is saved.
- Reset is triggered.
On next boot to last warm-reset, DDR training is restored from
the NV storage.
Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I8e4fb0824887af49e959c93825e2ab0ba887fc9d
NV storage API(s) for NXP platforms, supported on:
- flexspi-nor
- SecMon - General Purpose Registers at Low-Power section,
retains their content if backed by coined battery.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Id65dee4f28e7d6d2024407030039de33ebe0fa05
NXP SoC supports two TBB mode:
- MBED_TLS based
-- ROTK key hash is placed as part of the BL2 binary at section:
--- .rodata.nxp_rotpk_hash
-- Supporting non-volatile counter via SFP.
-- platform function used by TFA common authentication code.
- NXP CSF based
-- ROTK key deployment vary from MBEDTLS
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ib0f0bf024fd93de906c5d4f609383ae9e02b2fbc
All of the NXP SoC, needs fip_fuse image to be
loaded additionally as part of preparation for Trusted board boot
- fip_fuse.bin contains an image for auto fuse provisioning.
- Auto fuse provisioning is based on the input file with values for:
-- SRK Hash
-- OTPMK
-- misc. refer board manual for more details.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I26d4024fefe352d967ca120191f784f1f47aa9d1
Few of the NXP SoC like LX2160A, needs ddr-phy images to be
loaded additionally before DDR initialization
- fip_ddr.bin is created containing upto 6 ddr images.
- With TRUSTED_BOARD_BOOT = 1, fip_ddr.bin is authenticated
first before loading and starting DDR initialization.
- To successfully compile this image, platform-defined header files
needs to be defined:
-- include/common/tbbr/tbbr_img_def.h uses:
--- plat_tbbr_img_def.h: platform specific new FIP image macros.
-- include/tools/share/firmware_image_package.h uses:
--- plat_def_fip_uuid.h: platform specific new UUID macros.
---- Added UUID for DDR images to create FIP-DDR.
---- Added UUID for FUSE provisioning images to create FIP-fuse.
-- include/tools/share/tbbr_oid.h uses:
--- platform_oid.h: platform specific new OID macros.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Icbcf1673a8c398aae98680b5016f4276b4864b91
function load_img(), is dependent on:
- Recursively calling load_image() defined in common/bl_common.c
- for each image in the fip.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I57ca4b666cd1b0b992b7c0fc2a4260b558c0e2a9
bl31-data file written in assembly helps to manage data at bl31.
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ic3ace03364648cc1174bb05b5b334b9ccdaaa4ed
NXP specifc macro SET_NXP_MAKE_FLAG is added.
NXP has pool of multiple IPs. This macro helps:
- In soc.mk, this macro help the selected IP source files to be included
for that SoC.
-- The set of IPs required for one NXP SoC is different to the set of IPs
required by another NXP SoC.
- For the same SoC,
-- For one feature, the IP may be required in both BL2 and BL31.
-- Without the above feature, that IP may be required in one.
This macro help in selecting the inclusion of source and header files to:
--- BL2 only
--- BL31 only
--- COMM (used by BL2 and BL31)
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I2cdb13b89aa815fc5219cf8bfb9666d0a9f78765
Jiafei Pan
Biwen Li
Pankit Garg
Wasim Khan
Scott Branden
Pankaj Gupta