Add a banner that inform user that debug is enabled
on a secure chip.
Change-Id: Ib618ac1332b40a1af72d0b60750eea4fc36a8014
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Avoid the use of return inside switch/case in stm32mp_is_single_core().
Although this MISRA rulre might not be enforced, we align on what is done
for stm32mp_is_auth_supported().
Change-Id: I00a5ec1b18c55b4254af00c9c5cf5a4dce104175
Signed-off-by: Yann Gautier <yann.gautier@st.com>
STM32MP15xA and STM32MP15xD chip part numbers don't
support the secure boot.
All functions linked to secure boot must not be used
and signed binaries are not allowed on such chip.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I5b85f322f5eb3b64415e1819bd00fb2c99f20695
The monotonic counter is stored in an OTP fuse.
A check is done in TF-A.
If the TF-A version is incremented, then the counter will be updated
in the corresponding OTP.
Change-Id: I6e7831300ca9efbb35b4c87706f2dcab35affacb
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Mathieu Belou <mathieu.belou@st.com>
Use dt_find_otp_name() to retrieve platform OTP information
from device tree, directly or through stm32_get_otp_index() and
stm32_get_otp_value() platform services.
String definitions replace hard-coded values, they are used to call
this new function.
Change-Id: I81213e4a9ad08fddadc2c97b064ae057a4c79561
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Rename driver file to BSEC2.
Split header file in IP and feature parts.
Add functions to access BSEC scratch register.
Several corrections and improvements.
Probe the driver earlier, especially to check debug features.
Change-Id: I1981536398d598d67a19d2d7766dacc18de72ec1
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Used by driver parsing this node to get information.
Change-Id: I50623a497157adf7b9da6fafe8d79f6ff58c0ebc
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
This warning can only be removed if the version is newer than v1.6.0.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I472a8e552305b563447e8148074a5c0970b429e3
Remove stm32mp_incr_shrefcnt(), stm32mp_decr_shrefcnt(),
stm32mp_incr_refcnt() and stm32mp_decr_refcnt() that are unused.
The file is then just removed.
Change-Id: I09ee23c02317df5d8f71cbc355d3ed4a67ce2749
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Due to stm32mp_shres_helpers.h removal, the debug.h header is no more
included. It should then be added to stm32mp1_boot_device.c.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I397911ac05fdff464c010cf3b2e04320a781b4aa
Add support for enabling the FWU multi bank boot feature on the
platform.
Currently, this feature is supported on the STM32MP157C-DK2 board,
which boots off a uSD card. Also, support has been enabled when
booting from a FIP image.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: Ia69e858461e2daf599d41d66d7ff2ccae0c341c2
With the FWU Multi Bank update feature, the platform can boot from one
of multiple banks(partitions). Pass the value of bank from which the
platform has booted as boot index to the Update Agent. The Update
Agent will match this boot index value against the active_index field
in the metadata, and update the metadata if there is a mismatch.
Fow now, the mechanism to pass the boot index is platform specific. On
the STM32MP1 platform, the boot index value is passed through a
memorey mapped TAMP register on the SoC.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I0aa665ff9c1db95be8ae19ed8de6d866587d6850
Add support for reading the FWU metadata partition. The metadata
partition stores information on the current active bank along with
information on all the FWU updatable images on the platform. This
information is then used to identify the image to be booted.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I66bc5ac718c21a49c504e698b5b1f5c4daed2d08
Use STM32MP_HEADER_RESERVED_SIZE macro instead of a fixed value 0x3000
in linker script.
Change-Id: I2702285c15aebaa1304a891c8aaabc949a912ba6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This new function is used to fill the register(s) responsible to enable
high speed mode for pad in low voltage (<2.7V).
Change-Id: Ib8abc6628bdf51bbe6a866bc6a9bcdeb4a84a8f4
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add enable_io_comp_cell and disable_io_comp_cell local helpers
to enable or disable an IO compensation cell.
Change-Id: I65295298a7ece572ae939e2db93d10b188de0f9e
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Use the clock framework functions in SYSCFG driver instead of dedicated
functions.
Change-Id: Ifb50a5207e8cecef1c80d86e2de4d70ab6bf8b8b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Use a timeout during IO compensation enable function, when
waiting for ready status. If timeout expires, print a warning
message, to indicate that the SoC recommendation is not followed.
Change-Id: I98c7dcb1364b832f4f4b5fc9a0b85a3741a8af4b
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Because the BL2 is not relocated, the usage of BL2_IN_XIP_MEM
can be used. It reduces the binary size by removing all relocation
sections. XIP will not be used when STM32MP_USE_STM32IMAGE is
defined. Introduce new definitions for SEPARATE_CODE_AND_RODATA.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Ifd76f14e5bc98990bf84e0bfd4ee0b4e49a9a293
Simplify the BL2 MMU mapping and reduce the memory regions
number. Split the XLAT define between BL2 and BL32 as binaries
do not share the same tables anymore.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iaf09e72b4cc29acbe376f6f1cd2a8116c793ba26
This allows reducing MMU tables, and as there is nothing after ROM code
in memory mapping, this has no impact.
Change-Id: If51facb96a523770465cb06eb1ab400f75d26db3
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Only NAND memory map area can be of interest for BL2 in the
DEVICE2 area. Map DEVICE2 under STM32MP_RAW_NAND flag.
Change-Id: I7e3b39579e4a2525b25cb1987d6ec38038d0de2b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
These basic tests are generic and should be used independently of the
driver, depending on the plaftorm characteristics.
Change-Id: I38161b659ef2a23fd30a56e1c9b1bd98461a2fe4
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@foss.st.com>
stm32mp_ddrctl structure contains DDRCTRL registers definitions.
stm32mp_ddr_info contains general DDR information extracted from DT.
stm32mp_ddr_size moves to the generic side.
stm32mp1_ddr_priv contains platform private data.
stm32mp_ddr_dt_get_info() and stm32mp_ddr_dt_get_param() allow to
retrieve data from DT. They are located in new generic c/h files in
which stm32mp_ddr_param structure is declared. Platform makefile
is updated.
Adapt driver with this new classification.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I4187376c9fff1a30e7a94407d188391547107997
A new flag STM32MP_DDR_DUAL_AXI_PORT is added, and enabled by default.
It will allow choosing single or dual AXI ports for DDR.
Change-Id: I48826a66a6f4d18df87e081c0960af89ddda1b9d
Signed-off-by: Yann Gautier <yann.gautier@st.com>
On closed chips, it is not allowed to open debug. The BSEC debug
register can not be rewritten.
On open chips, the debug is already open, no need to rewrite this
register. This part of code is just removed.
An INFO message is displayed if debug is disabled.
The freeze of the watchdog during debug is also removed.
In case of debug, this must be managed by the software that enables
the debugger.
Change-Id: I19fbd3c487bb1018db30fd599cfa94fe5090899f
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Add function headers to improve readability.
Add asserts when required.
Use RCC_BASE address.
Change-Id: Ia545293f00167b6276331a986ea7aa08c006e004
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
According to ST Application note AN5256 [1], the minimum reset pulse
duration should be set to 31ms on boards powered with discrete
regulators.
[1] https://www.st.com/resource/en/application_note/dm00561921.pdf
Change-Id: Ib6ed029ee8a4b95f75a80948fdd2154b4ebe484f
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
print_pmic_info_and_debug() prints the PMIC version ID and displays
regulator information if debug is enabled.
It is under DEBUG flag and called after initialize_pmic() in BL2.
Change-Id: Ib81a625740b7ec6abb49cfca05e44c69efaa4718
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
SYSCFG can be initialized later, after console is up, to display the
warnings or messages it could issue.
PMIC should be initialized earlier, before SYSCFG init.
Change-Id: Icc3a1366083a1b1fde7f0e173645449b4c04c49b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This is mainly a clock interface with clk_ops callbacks.
Those callbacks are: enable, disable, get_rate, set_parent,
and is_enabled.
This framework is compiled for STM32MP1.
Change-Id: I5119a2aeaf103ceaae7a60d9e423caf0c148d794
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Warnings about header files include order were triggered by CI.
Correct the include order to mathc CI requirements.
Change-Id: Iaca959add924e0e1fa2e56fab2348f0ee36e5fa7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Protect the UART instance used for serial boot
with UART used for console.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: Ieee1557b34e7baa81594c3fbf0513191737027bf
Use stm32mp_uart_console_setup() in SP_min setup.
Adapt the function stm32mp_uart_console_setup() for BL32 (no reset, add
CONSOLE_FLAG_RUNTIME under DEBUG.
Change-Id: Ib2d35c8d285dafb680aa218872ad679cbf43d0ed
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Use newly created function stm32mp_uart_console_setup().
And remove now useless code.
Change-Id: Ib8d0319d3f4f54309848bc225b58608cea73bad9
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add function stm32_get_boot_interface to get the current boot interface
from information saved in the TAMP register.
Change-Id: I23af43c68eeaebe4c45920a57d739117aea3fbb1
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
The function stm32_save_boot_interface()is moved to stm32mp1_private.c
file. The files stm32mp1_context.{c,h} are removed.
As return is always 0, change the function to return void.
Call it earlier, to be able to use it when configuring console.
Change-Id: I8986e1257dc8e8708eab044a51ea1f2426b16597
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Those pins are configured by ROM code, for serial boot use cases.
Their configs are reset if the boot is done on UART, but not on USB.
This should then be done in TF-A. This has to be done after clock
init, and before console is configured.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I29a9694e25fcf1665360dd71f73937f769c43b52
Add set_gpio_reset_cfg() to set a pin in its reset configuration:
analog, no-pull, speed low, and its secure configuration, thanks to
stm32_gpio_is_secure_at_reset().
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I7b73c3636859f97fcc57f81cf68b42efc727922e
Sort the compilation flags in platform.mk when checking and defining
them for C files.
Change-Id: I5a08399c89ede4c0bd8697045706122732205db5
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Thanks to dyn_cfg_dtb_info_get_index(), we can check if TOS_FW_CONFIG
is inside the FIP partition. If not we can skip its treatment when
populating FIP images.
Change-Id: If5623eabd1ba484549d4a908d4a6f43325b36875
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Handle boot from UART with STM32CubeProgammer based on mmap io
for STM32MP15.
Depends-On: Iba84e8dfd67b9f30416efb0f6778e48ba1f75dad
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: Ibd719dd46a11da78633728675ef6639635b6cf67
Correctly handle USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION request
in USB driver and support a different result than
USB_DESC_TYPE_CONFIGURATION with the new optional ops
get_other_speed_config_desc().
The support of this descriptor is optionnal and is only
required when high-speed capable device which can operate at its
other possible speed.
This patch allows to remove the pbuf update in usb_core_get_desc()
and solves an issue on USB re-enumeration on STM32MP15 platform
as the result of get_config_desc() is a const array.
This issue is not see on normal use-case, as the USB enumeration
is only done in ROM code and TF-A reuse the same USB descritors.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I8edcc1e45065ab4e45d48f4bc37b49120674fdb0
Add a support of USB as serial boot devices for STM32MP15x platform:
the FIP file is provide by STM32CubeProgrammer with the DFU protocol,
loaded in DDR at DWL_BUFFER_BASE address and then the io memmap is used.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I272c17c458ff1e9d0780f8fa22330c8a35533d19
Add the USB descriptor, the struct used for USB enumeration with
the function usb_dfu_plat_init().
The USB support is based on the usb lib and on the stm32mp1 usb driver.
The content of enumeration (the string descriptor) is identical to
ROM code to avoid the USB reset en re-enumeration needs.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I18b40649e8df83813a5a340b0eee44c9a3470e43
This has been introduced to simplify dependencies on the FDT wrappers.
We generally want to avoid pulling in components on a file-by-file
basis, particularly as we are trying to draw conceptual boxes around
components in preparation for transitioning the build system to CMake,
where dependencies are modelled on libraries rather than files.
Signed-off-by: Chris Kay <chris.kay@arm.com>
Change-Id: Idb7ee05a9b54a8caa3e07f36e608867e20b6dcd5
Due to patch [1], the bl prefix was removed from the build macros.
It should then add explicitly when compiling stm32mp1.ld.S.
[1] 434d0491c5 ("refactor(makefile): remove BL prefixes in build macros")
Change-Id: I298dba2a7c958dd4ea6429c83ed4b1ee97e1735f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add casts where required to avoid compialtion error when enabling
-Wsign-compare in shared resources file.
The assert is also corrected to match the correct range (change ||
to &&).
Change-Id: Ie4c9c0c935d39ff9a2165b909172aacb3e94ab4d
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the reset set/clear sequence at the beginning of the function
plat_crash_console_init(). If not done, there is a risk that the UART
is in a bad state and will not be able to print correct characters.
Change-Id: Id31e28773d6c4f26f16d3569d1e3c5aa0e26e039
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This avoids duplicate define of TZC_REGION_NSEC_ALL_ACCESS_RDWR.
And remove the previous TZC400 definitions from stm32mp1_def.h.
Change-Id: I6c72c2a18731f69d855fbce8ce822a21da9364fa
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Add required code to support FCONF on STM32MP1 platform.
The new FW_CONFIG DT file will be inside the FIP, and loaded by BL2.
It will be used to configure the addresses where to load other binaries.
BL2 should be agnostic of which BL32 is in the FIP (OP-TEE or SP_min),
so optee_utils.c is always compiled, and some OP-TEE flags are removed.
Change-Id: Id957b49b0117864136250bfc416664f815043ada
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Instead of using a scratch buffer of 512 bytes, we can directly use the
image address and max size. The mmc_block_dev_spec struct info is then
overwritten for each image with this info, except FW_CONFIG and GPT
table which will still use the scratch buffer.
This allows using multiple blocks read on MMC, and so improves the boot
time.
A cache invalidate is required for the remaining data not used from the
first and last blocks read. It is not required for FW_CONFIG_ID,
as it is in scratch buffer in SYSRAM, and also because bl_mem_params
struct is overwritten in this case. This should also not be done if
the image is not found (OP-TEE extra binaries when using SP_min).
Change-Id: If3ecfdfe35bb9db66284036ca49c4bd1be4fd121
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
BL2 still uses the STM32 header binary format to be loaded from ROM code.
BL32 and BL33 and their respective device tree files are now put together
in a FIP file.
One DTB is created for each BL. To reduce their sizes, 2 new dtsi file are
in charge of removing useless nodes for a given BL. This is done because
BL2 and BL32 share the same device tree files base.
The previous way of booting is still available, the compilation flag
STM32MP_USE_STM32IMAGE has to be set to 1 in the make command. Some files
are duplicated and their names modified with _stm32_ to avoid too much
switches in the code.
Change-Id: I1ffada0af58486d4cf6044511b51e56b52269817
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Protect BL32 (SP_min) with MMU if OP-TEE is not used.
Validate OP-TEE header with optee_header_is_valid().
Use default values in bl2_mem_params_descs[]. They will be overwritten
in bl2_plat_handle_post_image_load() if OP-TEE is used.
Change-Id: I8614f3a17caa827561614d0f25f30ee90c4ec3fe
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Now that the DDR is mapped secured, the security settings (TZC400
firewall) have to be applied at the end of BL2 for the OP-TEE case.
This is required to avoid checskum computation error on U-Boot binary,
for which MMU and TZC400 would not be aligned.
Change-Id: I4a364f7117960e8fae1b579f341b9f140b766ea6
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
In BL2, the DDR can be mapped as secured in MMU, as no other SW
has access to it during its execution.
The TZC400 configuration is also updated to reflect this. When using
OP-TEE, the TZC400 is reconfigured at the end of BL2, to match OP-TEE
mapping. Else, SP_min will be in charge to reconfigure TZC400 to set
DDR non-secure.
Change-Id: Ic5ec614b218f733796feeab1cdc425d28cc7c103
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add new static functions to factorize code in stm32mp1_security.c.
Change-Id: Ifa5a1aaf7c56c25dba9a0ab8e985496d7cb06990
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The dependency on this macro was added by patch [1]. But the macro
itself was forgotten in the patch.
[1] 128e0b3e2e ("stm32mp1: update rules for stm32image tool")
Change-Id: I49219e1e13828b97b95f404983da33ef4567fe23
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
In stm32mp1_syscfg_disable_io_compensation(), to disable the IO
compensation cell, we have to set the corresponding bit in
SYSCFG_CMPENCLRR register, instead of clearing the bit in SETR register.
Change-Id: I510a50451f8afb9e98c24e1ea84efbf73a39e6b4
Signed-off-by: Yann Gautier <yann.gautier@st.com>
BSEC services should return SMC error codes as other IDs (defined in
stm32mp1_smc.h) and not BSEC driver ones. So that non-secure caller
is able to treat them correctly.
In global SMC handler, unknown ID should also return a value from this
definition list, and not the generic one, which seems not well adapted
for our needs.
Two unsigned values initializations are also changed from 0 to 0U.
Change-Id: Ib6fd3866a748cefad1d13d48f7be38241621023e
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
* changes:
refactor(plat/nvidia): use SOC_ID defines
refactor(plat/mediatek): use SOC_ID defines
refactor(plat/arm): use SOC_ID defines
feat(plat/st): implement platform functions for SMCCC_ARCH_SOC_ID
refactor(plat/st): export functions to get SoC information
feat(smccc): add bit definition for SMCCC_ARCH_SOC_ID
Device Tree address is now a parameter for dt_open_and_check() function.
This will allow better flexibility when introducing PIE and FIP.
The fdt pointer is now only assigned if the given address holds
a valid device tree file. This allows removing the fdt_checked variable,
as we now check fdt is not null.
Change-Id: I04cbb2fc05c9c711ae1c77d56368dbeb6dd4b01a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The boot device is now checked inside a dedicated rule, that is only
called during BL2 compilation step
Change-Id: Ie7bcd1f166285224b0c042238989a82f7b6105c6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Added a new STM32MP_EMMC_BOOT option, which is used to look for SSBL in
the same eMMC boot partition TF-A booted from at a fixed 256k offset. In
case STM32 image header is not found, the boot process rolls back to a
GPT partition look-up scheme.
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: I85a87dc9ae7f2b915ed8e584be80f4b3588efc48
Three functions are exported to get SoC version, SoC device ID, and SoC
name. Those functions are based on reworked existing static functions.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I1f3949062bb488286a9e7a38ffcd1457953dac56
In order to prepare future support of FIP, BL32 (SP_min) is compiled
as Position Independent Executable.
Change-Id: I15e7cc433fb03e1833002f4fe2eaecb6ed42eb47
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
BL2 size is set to 100kB, and BL32 to 72kB, regardless of OP-TEE
or stack protector flags.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Id7411bd55a4140718d64a647d81037720615fc81
TZC400 is configured to raise an interrupt in case of faulty access.
Call the new added tzc400_it_handler, in case this interrupt occurs.
Change-Id: Iaf4fa408a8eff99498042e11e2d6177bad39868c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
On STM32MP15, only filters 0 and 1 are used.
Use TZC_400_REGION_ATTR_FILTER_BIT() macro for those 2 filters 0 and 1
instead of U(3).
Change-Id: Ibc61823842ade680f59d5b66b8db59b6a30080e4
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The base address of UART peripheral should be given in R0, not in R1.
Otherwise the console_stm32_core_flush issues an assert message.
This issue was highlighted with recent changes in console flush functions.
Change-Id: Iead01986fdbbf30ad2fd9fa515a1d2b611b4e591
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The board information values, read in an OTP are never negative,
%u is then used instead of %d.
Change-Id: I3bc22401fb4d54666ddf56411f75b79aca738492
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Retrieve peripheral base address from a define instead of
parsing the device tree. The goal is to improve execution time.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2588c53ad3d4abcc3d7fe156458434a7940dd72b
Update the board info with the new coding including the finished good
variant:
Board: MBxxxx Var<CPN>.<FG> Rev.<Rev>-<BOM>
The OTP 59 coding is:
bit [31:16] (hex) => MBxxxx
bit [15:12] (dec) => Variant CPN (1....15)
bit [11:8] (dec) => Revision board (index with A = 1, Z = 26)
bit [7:4] (dec) => Variant FG : finished good (NEW)
bit [3:0] (dec) => BOM (01, .... 255)
Change-Id: I4fbc0c84596419d1bc30d166311444ece1d9123f
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2b702698d6be93da5ac86da1cbc98b3838315a5a
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Update to support new part numbers.
Add new STM32 MPUs Part = STM32MP151F, STM32MP153F, STM32MP157F,
STM32MP151D, STM32MP153D, STM32MP157D
The STM32MP1 series is available in 3 different lines which are pin-to-pin
compatible:
- STM32MP157: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz,
3D GPU, DSI display interface and CAN FD
- STM32MP153: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz
and CAN FD
- STM32MP151: Single Cortex-A7 core, Cortex-M4 core @ 209 MHz
Each line comes with a security option (cryptography & secure boot)
& a Cortex-A frequency option :
- A Basic + Cortex-A7 @ 650 MHz
- C Secure Boot + HW Crypto + Cortex-A7 @ 650 MHz
- D Basic + Cortex-A7 @ 800 MHz
- F Secure Boot + HW Crypto + Cortex-A7 @ 800 MHz
Remove useless variable in stm32mp_is_single_core().
Change-Id: Id30c836af986c6340c91efa8a7ae9480a2827089
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add a new revision of STM32MP15x CPU (Rev.Z).
Change-Id: I227dd6d9b3fcc43270015cfb21f60aeb0a8ab658
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
And from crash_console_flush.
We ignore the error information return by console_flush in _every_
place where we call it, and casting the return type to void does not
work around the MISRA violation that this causes. Instead, we collect
the error information from the driver (to avoid changing that API), and
don't return it to the caller.
Change-Id: I1e35afe01764d5c8f0efd04f8949d333ffb688c1
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Remove some useless extra tabs or spaces.
Replace some spaces with tabs.
Change-Id: I0e8e2a1a1be7a1109ba7f3e3ae35e3fe1b5b4552
Signed-off-by: Yann Gautier <yann.gautier@st.com>
In heavy parallel builds, it has sometimes been seen issues with the
tool not generated before it was needed. Change some rules order and
dependency to solve that.
Change-Id: I8f4b4f46a2ea0fe496bc66bca47c66d1c81d3c99
Signed-off-by: Yann Gautier <yann.gautier@st.com>
There were fixed values when computing PLAT_PARTITION_MAX_ENTRIES.
Use STM32_BL33_PARTS_NUM and STM32_RUNTIME_PARTS_NUM. The first one is
for the number of copies of BL33. The second one depends on the use case
SP_min or OP-TEE. For OP-TEE, there are 3 partitions. For SP_min, as it
is in the same binary as BL2, it is set to 0. It will be set to 1 if
BL32 is in a separate binary.
Change-Id: Iba4d8ec5fbc713bebfbdcd9f9426c3fded20d3ad
Signed-off-by: Yann Gautier <yann.gautier@st.com>
First put Makefile variables definition, then definitions for each feature,
then C flags, then source files, then compilation rules.
Change-Id: I238115ea2fe4ebafccd2135979814c27932c34e2
Signed-off-by: Yann Gautier <yann.gautier@st.com>