print_pmic_info_and_debug() prints the PMIC version ID and displays
regulator information if debug is enabled.
It is under DEBUG flag and called after initialize_pmic() in BL2.
Change-Id: Ib81a625740b7ec6abb49cfca05e44c69efaa4718
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Add a regulator framework to:
- provide an interface to consumers and drivers,
- connect consumers with drivers,
- handle most of devicetree-parsing,
- handle always-on and boot-on regulators,
- handle min/max voltages,
Change-Id: I23c939fdef2c71a416c44c9de332f70db0d2aa53
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Add support for ICC, sink mode, bypass mode,
active discharge and list voltages.
Handle LDO3 sink source mode in a different way to avoid
setting voltage while in sink source mode.
Change-Id: Ib1b909fd8a153f542917f650e43e24317a570534
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Add regulators boost, pwr_sw1 and pwr_sw2 regulators related to
USB OTG supply BOOST, SW_OTG and SWIN/SWOUT. These regulators are
needed since manipulated during the suspend/resume power sequence
as per FDT description for stm32mp15x-xxx boards from
STMicroelectronics.
Change-Id: I6217de707e49882bd5a9100db43e0d354908800d
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Store status of dt_pmic_status() as local static variable,
this avoids parsing DT several times.
In the same way, store nodes in dt_pmic_i2c_config() and
in dt_get_pmic_node() as local static variables.
Change-Id: I4585e9dfdde2847a369bffcc6f2b39ecc2b74de1
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
SYSCFG can be initialized later, after console is up, to display the
warnings or messages it could issue.
PMIC should be initialized earlier, before SYSCFG init.
Change-Id: Icc3a1366083a1b1fde7f0e173645449b4c04c49b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
With patch [1], ENABLE_SVE_FOR_NS is always enable.
Disable it for AARCH32 platforms, as the feature is not supported.
The warning message is replaced with an error, and the second override
is removed.
[1] dc78e62d80 ("feat(sme): enable SME functionality")
Change-Id: Ic9c5e2612c9e00bd0d37ca3b59537e39270c9799
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This is mainly a clock interface with clk_ops callbacks.
Those callbacks are: enable, disable, get_rate, set_parent,
and is_enabled.
This framework is compiled for STM32MP1.
Change-Id: I5119a2aeaf103ceaae7a60d9e423caf0c148d794
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Currently only UART0 is handled as console device, fix the
code to support UART1 as console also.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: Ifcd3c331cf6ce4afb0074357c92fc4addb9438b6
Currently only UART0 is handled as console device, fix the
code to support UART1 as console also.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I08f69b65b78b967ceb7159f4a467aa5982b1f791
Add MCDI related drivers to handle CPU powered on/off in CPU suspend.
TEST=build pass
BUG=b:202871018
Change-Id: I85aaaf3a0e992a39d17c58f3d9d5ff1b5770f748
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Implement PSCI platform operations to support CPU hotplug and MCDI.
TEST=bringup 8 CPUs successfully on kernel stage.
BUG=b:202871018
Change-Id: Ibd5423b70b3ca3f91edaa48d7ca5bc094e751510
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
In mt8186 suspend/resume flow, ATF has to communicate with a subsys by
read/write the subsys registers. However, the register region of subsys
doesn't include in the MMU mapping region. It triggers MMU faults.
This patch extends the MMU region 0 size to cover all mt8186 HW modules.
This patch also remove MMU region 1 because region 0 covers region 1.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I520c51338578bd68756cd02603ce6783f93daf51
DCM means dynamic clock management, and it can dynamically
slow down or gate clocks during CPU or bus idle.
1. Add MCUSYS related DCM drivers.
2. Enable MCUSYS related DCM by default.
TEST=build pass
BUG=b:202871018
Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.corp-partner.google.com>
Change-Id: Idc669364c89cde0974d2940bd12987ee833d1965
EMI MPU stands for external memory interface memory protect unit.
MT8186 supports 32 regions and 16 domains.
We add basic driver currently, and will add more settings for
EMI MPU in next patch.
TEST=build pass
BUG=b:202871018
Signed-off-by: Penny Jan <penny.jan@mediatek.corp-partner.google.com>
Change-Id: Ia9e5030164e40e060a05e8f91d2ac88258c2e98e
Cortex X2 erratum 2058056 is a Cat B erratum present in the X2 core.
It applies to revisions r0p0, r1p0, and r2p0 and is still open.
There are 2 ways this workaround can be accomplished, the first of
which involves executing a few additional instructions around MSR
writes to CPUECTLR when disabling the prefetcher. (see SDEN for
details)
However, this patch implements the 2nd possible workaround which sets
the prefetcher into its most conservative mode, since this workaround
is generic.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Idb20d9928c986616cd5bedf40bb29d46d384cfd3
Updated the fiptool to avoid packing the zero size images in
the FIP.
Also, updated the commitlint-json file to cover the fiptool
changes under a separate scope.
Change-Id: Id7ac3dcff0c7318546e49308d0f17b6cbd5eb24b
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Cortex X2 erratum 2002765 is a Cat B erratum present in the X2 core.
It applies to revisions r0p0, r1p0, and r2p0 and is still open.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I11576a03bfd8a6b1bd9ffef4430a097d763ca3cf
* changes:
feat(morello): expose scmi protocols in fdts
fix(morello): change the AP runtime UART address
feat(morello): add support for nt_fw_config
feat(morello): split platform_info sds struct
feat(morello): add changes to enable TBBR boot
feat(morello): add DTS for Morello SoC platform
feat(morello): configure DMC-Bing mode
feat(morello): zero out the DDR memory space
feat(morello): add TARGET_PLATFORM flag
fix(morello): fix SoC reference clock frequency
fix(arm): use PLAT instead of TARGET_PLATFORM
Warnings about header files include order were triggered by CI.
Correct the include order to mathc CI requirements.
Change-Id: Iaca959add924e0e1fa2e56fab2348f0ee36e5fa7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Cortex X2 erratum 2083908 is a Cat B erratum present in the Cortex
X2 core. It applies to revision r2p0 and is still open.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Id9dca2b042bf48e75fb3013ab37d1c5925824728
Add 'firmware' node in morello-soc.dts to expose SCMI
support to the kernel. The SCMI protocols supported at
the moment are SCMI Base, Clock and Perf (DVFS).
The current mailbox memory region in MHU SRAM has an issue
with any access not aligned to a 4-byte boundary. So, the SCMI
mailbox memory region has been relocated to AP non-trusted
RAM to get around the problem.
Signed-off-by: Anurag Koul <anurag.koul@arm.com>
Change-Id: Ibcbce8823b751a0fc3be7e9bc3588c1dc47ae024
SoC UART1 is internally connected to MCP UART1 so this
cannot be used as AP runtime UART instead we use the
IOFPGA UART0 as the AP runtime UART.
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Change-Id: Iecefb0d2cb875b3ecf97e0983b06f6e914835021
This patch adds support to load nt_fw_config
with the information from plat_info sds
structure which is then passed from BL2 to BL33.
Signed-off-by: sah01 <sahil@arm.com>
Change-Id: I2242da7404c72a4f9c2e3d7f3b5c154890a78526
Different platform_info sds struct definition will be used
for fvp and soc.
Signed-off-by: sahil <sahil@arm.com>
Change-Id: I92f0e1b2d0d755ad0405ceebfeb78d6e4c67013d
This patch adds all SOC and FVP related changes required to boot
a standard TBBR style boot on Morello.
Signed-off-by: sahil <sahil@arm.com>
Change-Id: Ib8f7f326790b13082cbe8db21a980e048e3db88c
Threat model for the current, BL1-only R-class support.
Signed-off-by: Gary Morrison <gary.morrison@arm.com>
Change-Id: I8479d5cb30f3cf3919281cc8dc1f21cada9511e0
Yann Gautier
Nicolas Le Bayon
Yann Gautier
Pascal Paillet
Etienne Carriere
Gabriel Fernandez
Venkatesh Yadav Abbarapu
Rex-BC Chen
Garmin.Chang
Yuchen Huang
Edward-JW Yang
Guodong Liu
Zhengnan Chen
Christine Zhu
James Lo
Penny Jan
Bipin Ravi
Mark Dykes
johpow01
Manish V Badarkhe
Madhukar Pappireddy
Olivier Deprez
Anurag Koul
Chandni Cherukuri
sah01
Manoj Kumar
Gary Morrison