This new target builds boot-image.bin binary as described in documentation.
This image does not contain WTMI image and therefore WTP repository is not
required for building.
Having ability to build just this boot-image.bin binary without full
flash-image.bin is useful for A3720 Turris MOX board which does not use
Marvell's WTP and a3700_utils.
To reduce duplicity between a8k and a3k code, define this new target and
also definitions for $(BUILD_PLAT)/$(BOOT_IMAGE) in common include file
marvell_common.mk.
For this purpose it is needed to include plat/marvell/marvell.mk file from
a3700_common.mk unconditionally (and not only when WTP is defined). Now
when common file plat/marvell/marvell.mk does not contain definition for
building $(DOIMAGETOOL), it is possible to move its inclusion at the top of
the a3700_common.mk file.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ic58303b37a1601be9a06ff83b7a279cb7cfc8280
Current binary wtptp/linux/tbb_linux which is specified in $(DOIMAGETOOL)
variable points to external pre-compiled Marvell x86_64 ELF linux binary
from A3700-utils-marvell WTP repository.
It means that currently it is not possible to compile TF-A for A3720 on
other host platform then linux x86_64.
Part of the A3700-utils-marvell WTP repository is also source code of
$(DOIMAGETOOL) TBB_Linux tool.
This change adds support for building $(DOIMAGETOOL) also for a3k platform.
After running $(MAKE) at appropriate subdirectory of A3700-utils-marvell
WTP repository, compiled TBB_linux tool will appear in WTP subdirectory
wtptp/src/TBB_Linux/release/. So update also $(DOIMAGETOOL) variable to
point to the correct location where TBB_linux was built.
To build TBB_linux it is required to compile external Crypto++ library
which is available at: https://github.com/weidai11/cryptopp.git
User needs to set CRYPTOPP_PATH option to specify path to that library.
After this change it is now possible to build whole firmware for A3720
platform without requirement to use pre-compiled/proprietary x86_64
executable binaries from Marvell.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I6f26bd4356778a2f8f730a223067a2e550e6c8e0
Fix a number of typos and misspellings in TF-A
documentation and comments.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Change-Id: I34c5a28c3af15f28d1ccada4d9866aee6af136ee
Currently, when RECLAIM_INIT_CODE is set, the
stacks are scaled to ensure that the entirety
of the init section can be reclaimed as stack.
This causes an issue in lib/psci/aarch64/psci_helpers.S,
where the stack size is used for cache operations in
psci_do_pwrdown_cache_maintenance(). If the stacks
are scaled, then the PSCI code may fail to invalidate
some of the stack memory before power down.
Resizing stacks is also not good for stability in general,
since code that works with a small number of cores may
overflow the stack when the number of cores is increased.
Change to make every stack be PLATFORM_STACK_SIZE big,
and allow the total stack to be smaller than the
init section.
Any pages of the init section not reclaimed as
stack will be set to read-only and execute-never,
for security.
Change-Id: I10b3884981006431f2fcbec3864c81d4a8c246e8
Signed-off-by: David Horstmann <david.horstmann@arm.com>
This patch is used to fix remaining non compliant code for Intel
SoCFPGA's mailbox and sip driver. These changes include:
- Change non-interface required uint32_t into unsigned int
- Change non-negative variable to unsigned int
- Remove obsolete variable initialization to 0
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I3a16c7621a5fc75eb614d97d72e44c86e7d53bf5
This patch is used to fix remaining non compliant code for Intel
SocFPGA's mailbox driver. These changes include:
- adding integer literal for unsigned constant
- fix non-boolean controlling expression
- add braces even on conditional single statement bodies
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I0f8fd96a3540f35ee102fd2f2369b76fa73e39e1
Attempt to restart the mailbox if the mailbox driver not able
to write any data into the mailbox command buffer.
Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Change-Id: Ia45291c985844dec9da82839cac701347534d32b
Allow mailbox command that is larger than mailbox command FIFO buffer
size to be sent to SDM in multiple chunks.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I683d5f1d04c4fdf57d11ecae6232b7ed3fc49e26
Change the main loop inside mailbox poll function from while(1) to a
retry counter named sdm_loop. This is to limit the maximum possible
looping of the function and prevent unexpected behaviour.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I63afad958fe5f656f6333b60d5a8b4c0ada3b23d
For each count down of time out counter, wait for number of
miliseconds to ensure the time out duration is predictive.
Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Change-Id: I0e92dd1ef1da0ef504ec86472cf0d3c88528930b
Mailbox driver should read the response data if the response length
in the response header is non-zero even the response header indicates
error (non-zero).
Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Change-Id: I928f705f43c0f46ac74b84428b830276cc4c9640
This patch factorizes mailbox read response from SDM into a function.
Also fix the logic to support reading larger than 16 words response from
SDM.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ie035ecffbbc42e12dd68061c403904c28c3b70e5
This patch modifies several basic mailbox driver features to prepare for
FCS enablement:
- Job id management for asynchronous response
- SDM command buffer full
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I78168dfb6c521d70d9cba187356b7a3c8e9b62d2
Sort and rearrange definitions in both mailbox and sip header to
increase readability and maintainability.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I5544c2f17efdf3174757c55afd8cc1062fbae856
Rename variables to improve readability of mailbox read response and
mailbox poll response flow.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Icd33ff1d2abb28eeead15e4eb9c7f9629f8cb402
Ensure 'PLAT_SEC_ENTRY' is cleared during early platform
setup. This is to prevent the slave CPU cores jump to the stale
entry point after warm reset when using U-Boot SPL as first
stage boot loader.
Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Change-Id: I3294ce2f74aa691d0cf311fa30f27f9d4fb8800a
Increase INTEL_SIP_SMC_FPGA_CONFIG_SIZE from 16 to 32MB. We need higher
pre-reserved memory size between Intel service layer and secure monitor
software so we can handle JIC file authorization.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Change-Id: Ibab4e42e4b7b93a4cf741e60ec9439359ba0a64c
Remove urgent argument from asynchrounous mailbox command as any urgent
command should always be synchronous
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Iaa64335db24df3a562470d0d1c3d6a3a71493319
Use pre-defined macros for return values and common mailbox arguments
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I5d549ee5358aebadf909f79fda55e83ee9844a0e
* changes:
plat: marvell: armada: Building ${DOIMAGETOOL} is only for a8k
plat: marvell: armada: Fix including plat/marvell/marvell.mk file
plat: marvell: armada: a3k: When WTP is empty do not define variables and targets which depends on it
For the first partition, mark first 2GB as device memory excluding
the Trusted DRAM region reserved for the SPMC.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I3ff110b3facf5b6d41ac2519ff6ca5e30a0a502b
The qemu_sbsa platform uses 42bit address size but
the cortex-a53 only supports 40bit addressing, the
cpu is incompatible with the platform.
The aem_generic is also not used with qemu_sbsa, in
fact, the platform currently only properly supports
the cortex-a57 cpu.
Change-Id: I91c92533116f1c3451d01ca99824e91d3d58df14
Signed-off-by: Tomas Pilar <tomas@nuviateam.com>
Currently a3k target is misusing ${DOIMAGETOOL} target for building flash
and UART images. It is not used for building image tool.
So move ${DOIMAGETOOL} target from common marvell include file into a8k
include file and add correct invocation of ${MAKE} into a3k for building
flash and UART images.
Part of this change is also checks that MV_DDR_PATH for a3k was specified
by user as this option is required for building a3k flash and UART images.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I5ae9d08b8505460933f17836c9b6435fd6e51bb6
This includes configuration for SPMC and trusted OS.
Change-Id: Ie24df200f446b3f5b23f5f764b115c7191e6ada3
Signed-off-by: Usama Arif <usama.arif@arm.com>
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
This patch enables SPMC execution at S-EL2 by adding below changes
- Map TC0_MAP_TZC_DRAM1 for loading SPMC
- Add details of cactus test secure partitions
- Adds tc0 spmc manifest file with details on secure partitions
- Inlcude TOS_FW_CONFIG when SPM is spmd
- Increases bl2 image size
SPMC at S-EL2 is only enabled when build with SPD=spmd.
Change-Id: I4c5f70911903c232ee8ecca57f1e288d6b1cd647
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
- Reserve 32MB below ARM_AP_TZC_DRAM1_BASE for TC0_TZC_DRAM1
- Add TC0_NS_DRAM1 base and mapping
- Reserve memory region in tc0.dts
Change-Id: If2431f7f68e4255e28c86a0e89637dab7c424a13
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
To support platforms without Trusted DRAM this patch defines
PLAT_ARM_SPMC_BASE and enables platform to use either Trusted DRAM or
DRAM region behind TZC.
Change-Id: Icaa5c7d33334258ff27e8e0bfd0812c304e68ae4
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Statistical Profiling Extension is not supported by Matterhorn core
Change-Id: Iec652f1c6d6b6a9bf118ba682276a7c70a6abc0d
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Include file plat/marvell/marvell.mk for platform A3700 was included two
times. Once from file plat/marvell/armada/a3k/common/a3700_common.mk and
second time from common file plat/marvell/armada/common/marvell_common.mk.
It caused following warning every time was make called:
plat/marvell/marvell.mk:51: warning: overriding recipe for target 'mrvl_clean'
plat/marvell/marvell.mk:51: warning: ignoring old recipe for target 'mrvl_clean'
Change in this commit removes inclusion of plat/marvell/marvell.mk file in
common file plat/marvell/armada/common/marvell_common.mk. As a80x0 platform
needs this include file, add it also into a80x0 platform specific include
file lat/marvell/armada/a8k/common/a8k_common.mk.
Also moves inclusion of plat/marvell/marvell.mk file in a3700 platform file
plat/marvell/armada/a3k/common/a3700_common.mk at correct place. Global
plat/marvell/marvell.mk expects that variables DOIMAGEPATH and DOIMAGETOOL
are already defined, but it defines MARVELL_SECURE_BOOT variable which is
needed by plat/marvell/armada/a3k/common/a3700_common.mk.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I5cbbd7eb8a3376924419f9850516b2a4924be5aa
For building fip image it is not needed to build target mrvl_flash. This
fip image contains only bl2, bl31 and bl33 (u-boot.bin) images and
therefore it does not depend on Marvell wtmi and wtp A3700-utils.
So remove mrvl_flash dependency for fip target to allow building fip image
without need to build mrvl_flash and therefore specify and provide Marvell
wmi and wtp A3700-utils.
This changes fixes compilation of fip image for A3700 platform by command:
make CROSS_COMPILE=aarch64-linux-gnu- BL33=/path/u-boot/u-boot.bin \
DEBUG=0 LOG_LEVEL=0 USE_COHERENT_MEM=0 PLAT=a3700 fip
Marvell boot image can be still build by 'mrvl_flash' target.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iba9a9da5be6fd1da23407fc2d490aedcb1a292c9
implementation of SMC call SMCCC_ARCH_SOC_ID
adding debugging logs in mem assign call.
Checking range of param in mem_assign call is from CB_MEM_RAM
or CB_MEM_RESERVED.
Change-Id: Iba51bff154df01e02dcb7715582ffaff7beba26e
Signed-off-by: Saurabh Gorecha <sgorecha@codeaurora.org>
Some of targets (e.g. mrvl_flash) depends on WTP build option. Other
targets (e.g. fip) can be build also without WTP build option as they do
not depend on it.
This change put all A3720 variables and targets which depends on WTP into
conditional if-endif section, so they are not defined when user has not
supplied WTP build option.
Target mrvl_flash is defined also when WTP was not specified and in this
case it just print error message to help user.
Variables which do not depend on WTP are moved to the top of
a3700_common.mk file.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Idb3892233586a0afca3e0e6564279641d2e4b960
The board information values, read in an OTP are never negative,
%u is then used instead of %d.
Change-Id: I3bc22401fb4d54666ddf56411f75b79aca738492
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Retrieve peripheral base address from a define instead of
parsing the device tree. The goal is to improve execution time.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2588c53ad3d4abcc3d7fe156458434a7940dd72b
Update the board info with the new coding including the finished good
variant:
Board: MBxxxx Var<CPN>.<FG> Rev.<Rev>-<BOM>
The OTP 59 coding is:
bit [31:16] (hex) => MBxxxx
bit [15:12] (dec) => Variant CPN (1....15)
bit [11:8] (dec) => Revision board (index with A = 1, Z = 26)
bit [7:4] (dec) => Variant FG : finished good (NEW)
bit [3:0] (dec) => BOM (01, .... 255)
Change-Id: I4fbc0c84596419d1bc30d166311444ece1d9123f
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2b702698d6be93da5ac86da1cbc98b3838315a5a
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>