The following SMIDs are disabled by default.
* GICD: MBIST REQ error and GICD FMU ClkGate override
* PPI: MBIST REQ error and PPI FMU ClkGate override
* ITS: MBIST REQ error and ITS FMU ClkGate override
This patch explicitly enables them during the FMU init sequence.
Change-Id: I573e64786e3318d4cbcd07d0a1caf25f8e6e9200
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch updates the gic600_fmu_init function to disable all safety
mechanisms for a block ID that is not present on the platform. All
safety mechanisms for GIC-600AE are enabled by default and should be
disabled for blocks that are not present on the platform to avoid
false positive RAS errors.
Change-Id: I52dc3bee9a8b49fd2e51d7ed851fdc803a48e6e3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The GIC-600AE uses a range of RAS features for all RAMs, which include
SECDED, ECC, and Scrub, software and bus error reporting. The GIC makes
all necessary information available to software through Armv8.2 RAS
architecture compliant register space.
This patch introduces support to probe the FMU_ERRGSR register to find
the right error record. Once the correct record is identified, the
"handler" function queries the FMU_ERR<m>STATUS register to further
identify the block ID, safety mechanism and the architecturally defined
primary error code. The description of the error is displayed on the
console to simplify debug.
Change-Id: I7e543664b74457afee2da250549f4c3d9beb1a03
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
* changes:
docs(layerscape): add ls1088a soc and board support
feat(ls1088aqds): add ls1088aqds board support
feat(ls1088ardb): add ls1088ardb board support
feat(ls1088a): add new SoC platform ls1088a
build(changelog): add new scopes for ls1088a
feat(bl2): add support to separate no-loadable sections
refactor(layerscape): refine comparison of inerconnection
feat(layerscape): add soc helper macro definition for chassis 3
feat(nxp-gic): add some macros definition for gicv3
feat(layerscape): add CHASSIS 3 support for tbbr
feat(layerscape): define more chassis 3 hardware address
feat(nxp-crypto): add chassis 3 support
feat(nxp-dcfg): add Chassis 3 support
feat(lx2): enable DDR erratas for lx2 platforms
feat(layerscape): print DDR errata information
feat(nxp-ddr): add workaround for errata A050958
feat(layerscape): add new soc errata a010539 support
feat(layerscape): add new soc errata a009660 support
feat(nxp-ddr): add rawcard 1F support
fix(layerscape): fix build issue of mmap_add_ddr_region_dynamically
fix(nxp-tools): fix create_pbl print log
build(changelog): add new scopes for NXP driver
The variable is_fwu_initialized was initialized after
plat_fwu_set_images_source() is called.
But some functions called by plat_fwu_set_images_source() for STM32MP1
implementation expect is_fwu_initialized is set to true with asserts.
Rename is_fwu_initialized to is_metadata_initialized, and set it before
plat_fwu_set_images_source() is called.
Change-Id: I17c6ee6293dfa55385b0c859db442647f0bebaed
Signed-off-by: Sebastien Pasdeloup <sebastien.pasdeloup-ext@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add support for Chassis 3.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I85cf68d4f1db81bf344e34dce13799ae173aa23a
Set the receiver gain to max value to recover
cold temp marginality issue for phy-gen2
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: If639fa3ed404cf6e1b8abcc2b7137db1fdd0b2c2
New UDIMM 18ADF2G72AZ-2G6E1 has raw card ID = 0x1F
Also, changing mask for raw card ID from - 0x8f -> 0x9f
Changing the mask need the raw card to changed from 0x0f -> 0x1f
Signed-off-by: Maninder Singh <maninder.singh_1@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Iee8e732ebc5e09cdca6917be608f1597c7edd9f9
* changes:
feat(stm32mp1): select platform compilation either by flag or DT
feat(stm32mp1-fdts): add support for STM32MP13 DK board
feat(stm32mp1-fdts): add DDR support for STM32MP13
feat(stm32mp1-fdts): add st-io_policies node for STM32MP13
feat(stm32mp1): updates for STM32MP13 device tree compilation
feat(stm32mp1-fdts): add DT files for STM32MP13
feat(dt-bindings): add TZC400 bindings for STM32MP13
feat(stm32mp1): add "Boot mode" management for STM32MP13
feat(stm32mp1): manage HSLV on STM32MP13
feat(stm32mp1): add sdmmc compatible in platform define
feat(st-sdmmc2): allow compatible to be defined in platform code
feat(stm32mp1): update IO compensation on STM32MP13
feat(stm32mp1): call pmic_voltages_init() in platform init
feat(st-pmic): add pmic_voltages_init() function
feat(stm32mp1): update CFG0 OTP for STM32MP13
feat(stm32mp1): usb descriptor update for STM32MP13
feat(st-clock): add clock driver for STM32MP13
feat(dt-bindings): add bindings for STM32MP13
feat(stm32mp1): get CPU info from SYSCFG on STM32MP13
feat(stm32mp1): use only one filter for TZC400 on STM32MP13
feat(stm32mp1): add a second fixed regulator
feat(stm32mp1): adaptations for STM32MP13 image header
feat(stm32mp1): update boot API for header v2.0
feat(stm32mp1): update IP addresses for STM32MP13
feat(stm32mp1): add part numbers for STM32MP13
feat(stm32mp1): chip rev. Z is 0x1001 on STM32MP13
feat(stm32mp1): update BACKUP_BOOT_MODE for STM32MP13
feat(stm32mp1): stm32mp_is_single_core() for STM32MP13
feat(stm32mp1): remove unsupported features on STM32MP13
feat(stm32mp1): update memory mapping for STM32MP13
feat(stm32mp1): introduce new flag for STM32MP13
feat(st): update stm32image tool for header v2
Put DT_SDMMC2_COMPAT under #ifndef. Keep the default value if it is not
defined in platform code.
Change-Id: I611baaf1fc622d33e655ee2c78d9c287baaa6a67
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This new function pmic_voltages_init() is used to set the minimum value
for STM32MP13 VDDCPU and VDDCORE regulators. This value is retrieved
from device tree.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ibbe237cb5dccc1fddf92e07ffd3955048ff82075
Add new clock driver for STM32MP13. Split the include file to manage
either STM32MP13 or STM32MP15.
Change-Id: Ia568cd12b1d5538809204f0fd2224d51e5d1e985
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
* GPIO: On STM32MP13, there are no banks GPIOJ, GPIOK and GPIOZ.
* STM32MP13 is a single Cortex-A7 CPU: remove reset from MPU1
and reset from MCU traces
* There is no MCU on STM32MP13. Put MCU security management
under STM32MP15 flag.
* The authentication feature is not supported yet on STM32MP13,
put the code under SPM32MP15 flag.
* On STM32MP13, the monotonic counter is managed in ROM code, keep
the monotonic counter update just for STM32MP15.
* SYSCFG: put registers not present on STM32MP13 under STM32MP15
flag, as the code that manages them.
* PMIC: use ldo3 during DDR configuration only for STM32MP15
* Reset UART pins on USB boot is no more required.
Change-Id: Iceba59484a9bb02828fe7e99f3ecafe69c837bc7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
The code declares different types of parameters.
static bool message_id_is_supported(unsigned int message_id);
static bool message_id_is_supported(size_t message_id)
{
...
}
Signed-off-by: Schspa Shi <schspa@gmail.com>
Change-Id: I7435d3b9309ea5fb5f8e3daa7173e09322184422
nutrs is set in ufs_enum (used by get_empty_slot), this will not
be assigned if UFS_FLAGS_SKIPINIT is set in flags during init and
might end up crashing read/write commands
Change-Id: I1517b69c56741fd5bf4ef0ebc1fc8738746233d7
Signed-off-by: anans <anans@google.com>
new function for sending commands and reuses that function in the
driver, this can also be used to have retries for specific
commands in the future
Signed-off-by: anans <anans@google.com>
Change-Id: Ie01f36ff8e2df072db4d97929d293b80ed24f04b
The static was found by sparse tool:
drivers/st/pmic/stm32mp_pmic.c:456:18: warning: symbol 'pmic_ops'
was not declared. Should it be static?
The const was also missing.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ibb5cfaf67ac980bf0af27712a95dbef05b617c25
UART oversampling by 8 allows higher baud rates for UART. This is
required when (UART freq / baudrate) <= 16. In this case the OVER8 bit
needs to be enabled in CR1 register. And the BRR register management is
different:
USARTDIV = (2 * UART freq / baudrate) (with div round nearest)
BRR[15:4] = USARTDIV[15:4]
BRR[3] = 0
BRR[2:0] = USARTDIV[3:0] >> 1
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ia3fbeeb73a36a4dc485c7ba428c531e65b6f6c09
To get the nearest divisor for BRR register, we use:
Divisor = (Uart clock + (baudrate / 2)) / baudrate
But lsl was wrongly used instead of lsr to have the division by 2.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Iedcc3ccdb4cf8268012e82a66df2a9ec48fc1d79
The issue was found by Coverity:
CID 376582: (UNINIT)
Using uninitialized value "*pllcfg[_PLL4]" when calling
"stm32mp1_check_pll_conf".
CID 376582: (UNINIT)
Using uninitialized value "*pllcfg[_PLL3]" when calling
"stm32mp1_check_pll_conf".
Check PLL configs are valid before using pllcfg.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I49de849eaf451d0c165a8eb8555112a0a4140bbc
Common mbedTLS implementation include the fixed configuration
file of mbedTLS and that does not gives flexilibility to the
platform to include their own mbedTLS configuration.
Hence changes are done so that platform can include their own
mbedTLS configuration file.
Signed-off-by: Lucian Paul-Trifu <lucian.paul-trifu@arm.com>
Signed-off-by: Manish V Badarkhe <manish.badarkhe@arm.com>
Change-Id: I04546589f67299e26b0a6a6e151cdf1fdb302607
ufs_read_blocks always zeros out the buffer before passing
to UFS for DMA. We don't need to zero out buf before reading
from UFS storage, this change remove the memset in ufs_read_blocks.
Signed-off-by: Channa Kadabi <kadabi@google.com>
Change-Id: I8029a7ea07fbd8cce29b383c80a3cfc782c5b7ec
With gcc-11, the -Wformat-signedness warning complains about enum values
that should be printed as unsigned values. Change %d to %u for several
lines in the clock driver.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ia2d24e6feef5e852e0a6bfaa1286fe605f9a16b7
* changes:
fix(nxp-crypto): refine code to avoid hang issue for some of toolchain
build(changelog): add new scope for nxp crypto
fix(lx2): drop erratum A-009810
Notice that aldo1 is typically useful for the Olimex A64 board, where
it powers the PE bank through the vcc-pe line.
Without it, it is not possible to light the user led on PE17, for
instance.
Change-Id: I70588bc977b884b22df87f1b075549cb8925925a
Signed-off-by: Thierry Bultel <thierry.bultel@linatsea.fr>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
bitfield structure maybe has strict-aliasing issue for some compiler,
for example the old code has hang issue for yocto 3.4 toolchain, so
refine the code to avoid to use bitfield structure.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I6b6d7597311240dd6d6b8ca4ce508c69332f9c68
* changes:
docs(layerscape): add ls1046a soc and board support
feat(ls1046aqds): add board ls1046aqds support
feat(ls1046afrwy): add ls1046afrwy board support
feat(ls1046ardb): add ls1046ardb board support
feat(ls1046a): add new SoC platform ls1046a
fix(nxp-tools): fix tool location path for byte_swape
fix(nxp-qspi): fix include path for QSPI driver
build(changelog): add new scopes for NXP layerscape platforms
Replace %d with %u in log, to avoid warning when
-Wformat-signedness is enabled.
Change-Id: Ied5823520181f225ae09bd164e2e52e9a7692c60
Signed-off-by: Yann Gautier <yann.gautier@st.com>
As cmd_idx is unsigned, we have to use %u and not %d.
This avoids warning when -Wformat-signedness is enabled.
Change-Id: I6954a8c939f3fb47dbb2c6db56a1909565af078b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
As page is unsigned, we should use %u and not %d.
Find with -Wformat-signedness.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I7205971ee5e83163e4fe47d33bb9e90832b59ae0
Some messages don't use the correct types, update them.
This avoids warning when -Wformat-signedness is enabled.
Change-Id: Ie5384a7d139c48a623e1617c93d15fecc8a36061
Signed-off-by: Yann Gautier <yann.gautier@st.com>
As filter is unsigned, we have to use %u and not %d.
This avoids warning when -Wformat-signedness is enabled.
Change-Id: I9fc9f15774dc974edfa3db65f5aecd1e70bc146b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the SZ_* macros from 32 to 2G.
This allows removing some defines in raw NAND driver
and STM32MP1 boot device selection code.
Change-Id: I3c4d4959b0f43e785eeb37a43d03b2906b7fcfbc
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Arpita S.K <Arpita.S.K@arm.com>
Previously ufs_write_blocks was memsetting the write buffer before
calling ufs_prepare_cmd, causing zeros to be written to UFS. This change
deletes the memset call so the original buffer contents get written to
UFS.
Signed-off-by: Jorge Troncoso <jatron@google.com>
Change-Id: I3299f11b30e6d7d409408ce11a6759c88607ee18
From the new binding, the RCC become secured based on the new
compatible. This must be done only from the secure OS initialisation.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I7f0a62f22bfcca638ddaefc9563df00f89f01653
The Event Log sources are added to the source-list of BL1 and BL2
images in the Event Log Makefile. It doesn't seem correct since
some platforms only compile Event Log sources for BL2.
Hence, moved compilation decision of Event Log sources to the
platform makefile.
Change-Id: I1cb96e24d6bea5e091d08167f3d1470d22b461cc
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
At boot, the devices under ETZPC control are secured, so should be
their GPIOs. As securable GPIOs are secured by default, keep the reset
values in BL2.
Change-Id: I9e560d936f8e8fda0f96f6299bb0c3b35ba9b71f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Allow to set a gpio in output mode from the device tree.
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Change-Id: Ic483324bc5fe916a60df05f74706bd1da4d08aa5
No functional, change, but some improvements:
- Declare set_gpio() as static (only called locally)
- Handle the type ('open-drain') property independently from the
mode one.
- Replace mmio_clrbits_32() + mmio_setbits_32() with
mmio_clrsetbits_32().
- Add a missing log
- Add missing U() in macro definitions
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Change-Id: I1a79609609ac8e8001127ebefdb81def573f76fa
Varun Wadekar
Joanna Farley
Jiafei Pan
Sebastien Pasdeloup
Biwen Li
Pankit Garg
Maninder Singh
Manish Pandey
Yann Gautier
Gabriel Fernandez
Schspa Shi
anans
Bipin Ravi
Madhukar Pappireddy
Yann Gautier
Manish V Badarkhe
Channa Kadabi
Thierry Bultel
Jorge Troncoso
Lionel Debieve
Fabien Dessenne