Use newly created function stm32mp_uart_console_setup().
And remove now useless code.
Change-Id: Ib8d0319d3f4f54309848bc225b58608cea73bad9
Signed-off-by: Yann Gautier <yann.gautier@st.com>
To ease console configuration, a dedicated function is created:
stm32mp_uart_console_setup(). The code will also be common for the
different BLs.
Change-Id: Idf3cad756f125ca2313cf30b1311637a9df8f27f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add function stm32_get_boot_interface to get the current boot interface
from information saved in the TAMP register.
Change-Id: I23af43c68eeaebe4c45920a57d739117aea3fbb1
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
The function stm32_save_boot_interface()is moved to stm32mp1_private.c
file. The files stm32mp1_context.{c,h} are removed.
As return is always 0, change the function to return void.
Call it earlier, to be able to use it when configuring console.
Change-Id: I8986e1257dc8e8708eab044a51ea1f2426b16597
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Those pins are configured by ROM code, for serial boot use cases.
Their configs are reset if the boot is done on UART, but not on USB.
This should then be done in TF-A. This has to be done after clock
init, and before console is configured.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I29a9694e25fcf1665360dd71f73937f769c43b52
Add set_gpio_reset_cfg() to set a pin in its reset configuration:
analog, no-pull, speed low, and its secure configuration, thanks to
stm32_gpio_is_secure_at_reset().
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I7b73c3636859f97fcc57f81cf68b42efc727922e
Sort the compilation flags in platform.mk when checking and defining
them for C files.
Change-Id: I5a08399c89ede4c0bd8697045706122732205db5
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Thanks to dyn_cfg_dtb_info_get_index(), we can check if TOS_FW_CONFIG
is inside the FIP partition. If not we can skip its treatment when
populating FIP images.
Change-Id: If5623eabd1ba484549d4a908d4a6f43325b36875
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Handle boot from UART with STM32CubeProgammer based on mmap io
for STM32MP15.
Depends-On: Iba84e8dfd67b9f30416efb0f6778e48ba1f75dad
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: Ibd719dd46a11da78633728675ef6639635b6cf67
Add a file to support the STMicroelectronics tool STM32CubeProgrammer
over UART in BL2 for STM32MP15x platform.
This tools is based on protocol defined in AN5275,
"USB DFU/USART protocols used in STM32MP1 Series bootloaders"
based on STM32 MCU protocols (AN3155, "USART protocol used
in the STM32 bootloader").
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: I956c95d8de0a94d1eb8e61f043651dae7b838170
Correctly handle USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION request
in USB driver and support a different result than
USB_DESC_TYPE_CONFIGURATION with the new optional ops
get_other_speed_config_desc().
The support of this descriptor is optionnal and is only
required when high-speed capable device which can operate at its
other possible speed.
This patch allows to remove the pbuf update in usb_core_get_desc()
and solves an issue on USB re-enumeration on STM32MP15 platform
as the result of get_config_desc() is a const array.
This issue is not see on normal use-case, as the USB enumeration
is only done in ROM code and TF-A reuse the same USB descritors.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I8edcc1e45065ab4e45d48f4bc37b49120674fdb0
Replace double space with single space in stm32cubeprogrammer_usb.c.
Change-Id: I717b136119e85fe8e25dd540758525f995200458
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add a support of USB as serial boot devices for STM32MP15x platform:
the FIP file is provide by STM32CubeProgrammer with the DFU protocol,
loaded in DDR at DWL_BUFFER_BASE address and then the io memmap is used.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I272c17c458ff1e9d0780f8fa22330c8a35533d19
Add the USB descriptor, the struct used for USB enumeration with
the function usb_dfu_plat_init().
The USB support is based on the usb lib and on the stm32mp1 usb driver.
The content of enumeration (the string descriptor) is identical to
ROM code to avoid the USB reset en re-enumeration needs.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I18b40649e8df83813a5a340b0eee44c9a3470e43
Add a file to support over USB the STMicroelectronics tool
STM32CubeProgrammer in BL2 for STM32MP15x platform.
This tools is based on DFU stack.
Change-Id: I48a8f772cb0e9b8be24c06847f724f0470c0f917
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Add a stack to support the Universal Serial Bus Device Class
Specification for Device Firmware Upgrade (USB DFU v1.1).
This stack is based on the USB device stack (USBD).
Change-Id: I8a56411d184882b6a9e3617c6dfb859086b8f353
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
This has been introduced to simplify dependencies on the FDT wrappers.
We generally want to avoid pulling in components on a file-by-file
basis, particularly as we are trying to draw conceptual boxes around
components in preparation for transitioning the build system to CMake,
where dependencies are modelled on libraries rather than files.
Signed-off-by: Chris Kay <chris.kay@arm.com>
Change-Id: Idb7ee05a9b54a8caa3e07f36e608867e20b6dcd5
Due to patch [1], the bl prefix was removed from the build macros.
It should then add explicitly when compiling stm32mp1.ld.S.
[1] 434d0491c5 ("refactor(makefile): remove BL prefixes in build macros")
Change-Id: I298dba2a7c958dd4ea6429c83ed4b1ee97e1735f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add casts where required to avoid compialtion error when enabling
-Wsign-compare in shared resources file.
The assert is also corrected to match the correct range (change ||
to &&).
Change-Id: Ie4c9c0c935d39ff9a2165b909172aacb3e94ab4d
Signed-off-by: Yann Gautier <yann.gautier@st.com>
An STM32 image with the awaited header major version shouldn't be forbid
to boot. If the minor differs, then it means only non-mandatory options
have been added in the reserved fields, and the header remains backward
compatible.
Change-Id: Iff16b67f95c728e2f1d128bd1760a4be497c5ca3
Signed-off-by: Yann Gautier <yann.gautier@st.com>
dt_match_instance_by_compatible() gives the DT node offset in DT
that matches both compatible and the peripheral instance address.
Change-Id: Ia85f4f4aa8fe8efd4df310d765e7586e67aa34c2
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the reset set/clear sequence at the beginning of the function
plat_crash_console_init(). If not done, there is a risk that the UART
is in a bad state and will not be able to print correct characters.
Change-Id: Id31e28773d6c4f26f16d3569d1e3c5aa0e26e039
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This avoids duplicate define of TZC_REGION_NSEC_ALL_ACCESS_RDWR.
And remove the previous TZC400 definitions from stm32mp1_def.h.
Change-Id: I6c72c2a18731f69d855fbce8ce822a21da9364fa
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Add required code to support FCONF on STM32MP1 platform.
The new FW_CONFIG DT file will be inside the FIP, and loaded by BL2.
It will be used to configure the addresses where to load other binaries.
BL2 should be agnostic of which BL32 is in the FIP (OP-TEE or SP_min),
so optee_utils.c is always compiled, and some OP-TEE flags are removed.
Change-Id: Id957b49b0117864136250bfc416664f815043ada
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Instead of using a scratch buffer of 512 bytes, we can directly use the
image address and max size. The mmc_block_dev_spec struct info is then
overwritten for each image with this info, except FW_CONFIG and GPT
table which will still use the scratch buffer.
This allows using multiple blocks read on MMC, and so improves the boot
time.
A cache invalidate is required for the remaining data not used from the
first and last blocks read. It is not required for FW_CONFIG_ID,
as it is in scratch buffer in SYSRAM, and also because bl_mem_params
struct is overwritten in this case. This should also not be done if
the image is not found (OP-TEE extra binaries when using SP_min).
Change-Id: If3ecfdfe35bb9db66284036ca49c4bd1be4fd121
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
BL2 still uses the STM32 header binary format to be loaded from ROM code.
BL32 and BL33 and their respective device tree files are now put together
in a FIP file.
One DTB is created for each BL. To reduce their sizes, 2 new dtsi file are
in charge of removing useless nodes for a given BL. This is done because
BL2 and BL32 share the same device tree files base.
The previous way of booting is still available, the compilation flag
STM32MP_USE_STM32IMAGE has to be set to 1 in the make command. Some files
are duplicated and their names modified with _stm32_ to avoid too much
switches in the code.
Change-Id: I1ffada0af58486d4cf6044511b51e56b52269817
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Protect BL32 (SP_min) with MMU if OP-TEE is not used.
Validate OP-TEE header with optee_header_is_valid().
Use default values in bl2_mem_params_descs[]. They will be overwritten
in bl2_plat_handle_post_image_load() if OP-TEE is used.
Change-Id: I8614f3a17caa827561614d0f25f30ee90c4ec3fe
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Now that the DDR is mapped secured, the security settings (TZC400
firewall) have to be applied at the end of BL2 for the OP-TEE case.
This is required to avoid checskum computation error on U-Boot binary,
for which MMU and TZC400 would not be aligned.
Change-Id: I4a364f7117960e8fae1b579f341b9f140b766ea6
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Some parameters from BootROM boot context can be required after boot.
To save space in SYSRAM, this context can be overwritten during images
load sequence. The needed information (here the boot interface) is
then saved in a local variable.
Change-Id: I5e1ad4630ccf78480f415a0a83939005ae67729e
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Avoid parsing device tree every time when returning
the DDR size.
A cache flush on this size is also added because TZC400 configuration
is applied at the end of BL2 after MMU and data cache being turned off.
Configuration needs to retrieve the DDR size to generate the correct
region. Access to the size fails because the value is still in the data
cache. Flushing the size is mandatory.
Change-Id: I3dd1958f37d806f9c15a5d4151968935f6fe642e
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
In BL2, the DDR can be mapped as secured in MMU, as no other SW
has access to it during its execution.
The TZC400 configuration is also updated to reflect this. When using
OP-TEE, the TZC400 is reconfigured at the end of BL2, to match OP-TEE
mapping. Else, SP_min will be in charge to reconfigure TZC400 to set
DDR non-secure.
Change-Id: Ic5ec614b218f733796feeab1cdc425d28cc7c103
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add new static functions to factorize code in stm32mp1_security.c.
Change-Id: Ifa5a1aaf7c56c25dba9a0ab8e985496d7cb06990
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add a generic function to setup the stm32image IO.
Change-Id: I0f7cf4a6030605037643f3119b809e0319d926af
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Add a panic() at the end of stm32mp_io_setup() if the boot interface
given in ROM code boot context is not supported.
Change-Id: I0d50f21a11231febd21041b6e63108cc3e6f4f0c
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
The dependency on this macro was added by patch [1]. But the macro
itself was forgotten in the patch.
[1] 128e0b3e2e ("stm32mp1: update rules for stm32image tool")
Change-Id: I49219e1e13828b97b95f404983da33ef4567fe23
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
In stm32mp1_syscfg_disable_io_compensation(), to disable the IO
compensation cell, we have to set the corresponding bit in
SYSCFG_CMPENCLRR register, instead of clearing the bit in SETR register.
Change-Id: I510a50451f8afb9e98c24e1ea84efbf73a39e6b4
Signed-off-by: Yann Gautier <yann.gautier@st.com>
BSEC services should return SMC error codes as other IDs (defined in
stm32mp1_smc.h) and not BSEC driver ones. So that non-secure caller
is able to treat them correctly.
In global SMC handler, unknown ID should also return a value from this
definition list, and not the generic one, which seems not well adapted
for our needs.
Two unsigned values initializations are also changed from 0 to 0U.
Change-Id: Ib6fd3866a748cefad1d13d48f7be38241621023e
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
* changes:
refactor(plat/nvidia): use SOC_ID defines
refactor(plat/mediatek): use SOC_ID defines
refactor(plat/arm): use SOC_ID defines
feat(plat/st): implement platform functions for SMCCC_ARCH_SOC_ID
refactor(plat/st): export functions to get SoC information
feat(smccc): add bit definition for SMCCC_ARCH_SOC_ID
Device Tree address is now a parameter for dt_open_and_check() function.
This will allow better flexibility when introducing PIE and FIP.
The fdt pointer is now only assigned if the given address holds
a valid device tree file. This allows removing the fdt_checked variable,
as we now check fdt is not null.
Change-Id: I04cbb2fc05c9c711ae1c77d56368dbeb6dd4b01a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The boot device is now checked inside a dedicated rule, that is only
called during BL2 compilation step
Change-Id: Ie7bcd1f166285224b0c042238989a82f7b6105c6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Added a new STM32MP_EMMC_BOOT option, which is used to look for SSBL in
the same eMMC boot partition TF-A booted from at a fixed 256k offset. In
case STM32 image header is not found, the boot process rolls back to a
GPT partition look-up scheme.
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: I85a87dc9ae7f2b915ed8e584be80f4b3588efc48
The io_dummy code and function calls are only used in case BL32 is TF-A
SP_min, and not OP-TEE. This code in bl2_io_storage can then be put under
#ifndef AARCH32_SP_OPTEE.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I52787a775160b335f97547203f653419621f5147
STM32MP1 does not use BL1, the loading of BL2 is done by ROM code. It is
then useless to have an entry BL2_IMAGE_ID in the policies.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I464cedf588114d60522433123f8dbef32ae36818
The JEDEC information for STMicroelectronics is:
JEDEC_ST_MFID U(0x20)
JEDEC_ST_BKID U(0x0)
And rely on platform functions to get chip IP and revision.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I4fa4ac8bb5583b1871b768decc9fe08e8966ff54
Three functions are exported to get SoC version, SoC device ID, and SoC
name. Those functions are based on reworked existing static functions.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I1f3949062bb488286a9e7a38ffcd1457953dac56
In order to prepare future support of FIP, BL32 (SP_min) is compiled
as Position Independent Executable.
Change-Id: I15e7cc433fb03e1833002f4fe2eaecb6ed42eb47
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
BL2 size is set to 100kB, and BL32 to 72kB, regardless of OP-TEE
or stack protector flags.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Id7411bd55a4140718d64a647d81037720615fc81
Create a dedicated static struct mmc_device_info mmc_info mmc_info
instead of having this in stack.
A boot issue has been seen on some platform when applying patch [1].
[1] 13f3c5166f ("mmc:prevent accessing to the released space in case of wrong usage")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I73a079715253699d903721c865d6470d58f6bd30
TZC400 is configured to raise an interrupt in case of faulty access.
Call the new added tzc400_it_handler, in case this interrupt occurs.
Change-Id: Iaf4fa408a8eff99498042e11e2d6177bad39868c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
On STM32MP15, only filters 0 and 1 are used.
Use TZC_400_REGION_ATTR_FILTER_BIT() macro for those 2 filters 0 and 1
instead of U(3).
Change-Id: Ibc61823842ade680f59d5b66b8db59b6a30080e4
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The base address of UART peripheral should be given in R0, not in R1.
Otherwise the console_stm32_core_flush issues an assert message.
This issue was highlighted with recent changes in console flush functions.
Change-Id: Iead01986fdbbf30ad2fd9fa515a1d2b611b4e591
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The board information values, read in an OTP are never negative,
%u is then used instead of %d.
Change-Id: I3bc22401fb4d54666ddf56411f75b79aca738492
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Retrieve peripheral base address from a define instead of
parsing the device tree. The goal is to improve execution time.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2588c53ad3d4abcc3d7fe156458434a7940dd72b
Update the board info with the new coding including the finished good
variant:
Board: MBxxxx Var<CPN>.<FG> Rev.<Rev>-<BOM>
The OTP 59 coding is:
bit [31:16] (hex) => MBxxxx
bit [15:12] (dec) => Variant CPN (1....15)
bit [11:8] (dec) => Revision board (index with A = 1, Z = 26)
bit [7:4] (dec) => Variant FG : finished good (NEW)
bit [3:0] (dec) => BOM (01, .... 255)
Change-Id: I4fbc0c84596419d1bc30d166311444ece1d9123f
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2b702698d6be93da5ac86da1cbc98b3838315a5a
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Update to support new part numbers.
Add new STM32 MPUs Part = STM32MP151F, STM32MP153F, STM32MP157F,
STM32MP151D, STM32MP153D, STM32MP157D
The STM32MP1 series is available in 3 different lines which are pin-to-pin
compatible:
- STM32MP157: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz,
3D GPU, DSI display interface and CAN FD
- STM32MP153: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz
and CAN FD
- STM32MP151: Single Cortex-A7 core, Cortex-M4 core @ 209 MHz
Each line comes with a security option (cryptography & secure boot)
& a Cortex-A frequency option :
- A Basic + Cortex-A7 @ 650 MHz
- C Secure Boot + HW Crypto + Cortex-A7 @ 650 MHz
- D Basic + Cortex-A7 @ 800 MHz
- F Secure Boot + HW Crypto + Cortex-A7 @ 800 MHz
Remove useless variable in stm32mp_is_single_core().
Change-Id: Id30c836af986c6340c91efa8a7ae9480a2827089
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add a new revision of STM32MP15x CPU (Rev.Z).
Change-Id: I227dd6d9b3fcc43270015cfb21f60aeb0a8ab658
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
And from crash_console_flush.
We ignore the error information return by console_flush in _every_
place where we call it, and casting the return type to void does not
work around the MISRA violation that this causes. Instead, we collect
the error information from the driver (to avoid changing that API), and
don't return it to the caller.
Change-Id: I1e35afe01764d5c8f0efd04f8949d333ffb688c1
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Remove some useless extra tabs or spaces.
Replace some spaces with tabs.
Change-Id: I0e8e2a1a1be7a1109ba7f3e3ae35e3fe1b5b4552
Signed-off-by: Yann Gautier <yann.gautier@st.com>
In heavy parallel builds, it has sometimes been seen issues with the
tool not generated before it was needed. Change some rules order and
dependency to solve that.
Change-Id: I8f4b4f46a2ea0fe496bc66bca47c66d1c81d3c99
Signed-off-by: Yann Gautier <yann.gautier@st.com>
There were fixed values when computing PLAT_PARTITION_MAX_ENTRIES.
Use STM32_BL33_PARTS_NUM and STM32_RUNTIME_PARTS_NUM. The first one is
for the number of copies of BL33. The second one depends on the use case
SP_min or OP-TEE. For OP-TEE, there are 3 partitions. For SP_min, as it
is in the same binary as BL2, it is set to 0. It will be set to 1 if
BL32 is in a separate binary.
Change-Id: Iba4d8ec5fbc713bebfbdcd9f9426c3fded20d3ad
Signed-off-by: Yann Gautier <yann.gautier@st.com>
First put Makefile variables definition, then definitions for each feature,
then C flags, then source files, then compilation rules.
Change-Id: I238115ea2fe4ebafccd2135979814c27932c34e2
Signed-off-by: Yann Gautier <yann.gautier@st.com>
To simplify the rule that creates the concatenated binary, use ASFLAGS
instead of adding all paths in the AS command line. This allows a better
management if a binary is not present.
Change-Id: Ic8b4566e7dedc6f55be355a92e3b214cef138d9b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The previous proprietary version was not correctly handling dependencies.
Using MAKE_LD from make_helpers files now correctly handles that.
The generated linker script is the same as before.
Change-Id: Iccfd8dc3fffa7a33e73b184b72e0dfd5d26bc9c9
Signed-off-by: Yann Gautier <yann.gautier@st.com>
There is one dtsi file per SoC version:
- STM32MP151: common part for all version, Single Cortex-A7
- STM32MP153: Dual Cortex-A7
- STM32MP157: + GPU and DSI, but not needed for TF-A
The STM32MP15xC include a cryptography peripheral, add it in a dedicated
file.
There are 4 packages available, for which the IOs number change. Have one
file for each package. The 2 packages AB and AD are added.
STM32157A-DK1 and STM32MP157C-DK2 share most of their features, a common
dkx file is then created.
Some reordering is done in other files, and realign with kernel DT files.
The DDR files are generated with our internal tool, no changes in the
registers values.
Change-Id: I9f2ef00306310abe34b94c2f10fc7a77a10493d1
Signed-off-by: Yann Gautier <yann.gautier@st.com>
If GPIO port for UART TX is less than 8, the register GPIO_AFRL should
be used to set the alternate. GPIO_AFRH is used if GPIO port is greater
or equal to 8. The macro GPIO_TX_ALT_SHIFT is removed and the GPIO port
number is tested against GPIO_ALT_LOWER_LIMIT (=8) in
plat_crash_console_init() function.
Change-Id: Ibb62223ed6bce589bbcab59a5e986b2677e6d118
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The STM32MP1 implementation of this function will call
plat_report_exception(). It displays more information about the panic
if DEBUG is enabled.
The LR register is also filled with R6 content, which hold the faulty
address. This allows debugger to reconstruct the backtrace.
Change-Id: I6710e8e2ab6658b05c5bbad2f3c545f07f355afb
Signed-off-by: Yann Gautier <yann.gautier@st.com>
In case DEBUG is enabled, plat_report_exception will now display extra
information of the cause of the exception.
Change-Id: I72cc9d180959cbf31c13821dd051eaf4462b733e
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Loop macros make it easier for developers to include new variables to
assert or define and also help code code readability on makefiles.
Change-Id: I0d21d6e67b3eca8976c4d856ac8ccc02c8bb5ffa
Signed-off-by: Leonardo Sandoval <leonardo.sandoval@linaro.org>
Include the GICv2 makefile in STM32MP1 SP_min makefile, and use
${GICV2_SOURCES} instead of taking drivers/arm/gic files directly.
Change-Id: Ibcaed5b0bd17f6d8cf200e208c11cc10cd6d2ee5
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This change implements platform services for stm32mp1 to expose clock
and reset controllers over SCMI clock and reset domain protocols
in sp_min firmware.
Requests execution use a fastcall SMC context using a SiP function ID.
The setup allows the create SCMI channels by assigning a specific
SiP SMC function ID for each channel/agent identifier defined. In this
change, stm32mp1 exposes a single channel and hence expects single
agent at a time.
The input payload in copied in secure memory before the message
in passed through the SCMI server drivers. BL32/sp_min is invoked
for a single SCMI message processing and always returns with a
synchronous response message passed back to the caller agent.
This change fixes and updates STM32_COMMON_SIP_NUM_CALLS that was
previously wrongly set 4 whereas only 1 SiP SMC function ID was to
be counted. STM32_COMMON_SIP_NUM_CALLS is now set to 3 since the
2 added SiP SMC function IDs for SCMI services.
Change-Id: Icb428775856b9aec00538172aea4cf11e609b033
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Introduce helper functions stm32mp_register_secure_gpio() and
stm32mp_register_non_secure_gpio() for drivers to register a
GPIO pin as secure or non-secure.
These functions are stubbed when shared resource driver is not
embedded in the BL image so that drivers do not bother whether they
shall register or not their resources.
Change-Id: I1fe98576c072ae31f75427c9ac5c9f6c4f1b6ed1
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Introduce helper functions stm32mp_register_secure_periph_iomem()
and stm32mp_register_non_secure_periph_iomem() for drivers to
register a resource as secure or non-secure based on its SoC
interface registers base address.
These functions are stubbed when shared resources driver is not
embedded (!STM32MP_SHARED_RESOURCES) so that drivers embedded
in other BL stages do not bother whether they shall register or
not their resources.
Change-Id: Icebd05a930afc5964bc4677357da5d1b23666066
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Update implementation of stm32mp_nsec_can_access_reset() based
on the registering of the shared resources.
Querying registering state locks further registration of
peripherals.
Change-Id: I5f38f2a3481780b9a71939d95984c4821c537aa4
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Update implementation of stm32mp_nsec_can_access_clock() based
on the registering of the shared resources.
Querying registering state locks further registration of peripherals.
Change-Id: If68f6d4a52c4742ba66244c6ea2d9afa08404137
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Define helper functions stm32mp_register_secure_periph() and
stm32mp_register_non_secure_periph() for platform drivers to
register a shared resource assigned to respectively secure
or non-secure world.
Some resources are related to clock resources. When a resource is
registered as secure, ensure its clock dependencies are also
registered as secure. Registering a non-secure resource does not
mandate its clock dependencies are also registered as non-secure.
Change-Id: I74975be8976b8d3bf18dcc807541a072803af6e3
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Define from helper functions to get a human readable string
identifier from a shared resource enumerated ID. Use them to
make debug traces more friendly peripheral registering functions.
Change-Id: I9e207b8ce1d1e9250e242ca7e15461b9a1532f40
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Embed Arch Architecture SMCCC services in stm32mp1 SP_MIN. This
service is needed by Linux kernel to setup the SMCCC conduit
used by its SCMI SMC transport driver.
Change-Id: I454a7ef3048a77ab73fff945e8115b60445d5841
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
SCMI shared memory is used to exchange message payloads between
secure SCMI services and non-secure SCMI agents. It is mapped
uncached (device) mainly to conform to existing support in
the Linux kernel. Note that executive messages are mostly short
(few 32bit words) hence not using cache will not penalize much
performances.
Platform stm32mp1 shall configure ETZPC to harden properly the
secure and non-secure areas of the SYSRAM address space, that before
CPU accesses the shared memory when mapped non-secure.
This change defines STM32MP_SEC_SYSRAM_BASE/STM32MP_SEC_SYSRAM_SIZE and
STM32MP_NS_SYSRAM_BASE/STM32MP_NS_SYSRAM_SIZE.
Change-Id: I71ff02a359b9668ae1c5a71b5f102cf3d310f289
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
When using SP_min as monitor, only sp_min_warm_entrypoint() is a valid
secure entry point.
Change-Id: I440cec798e901b11a34dd482c33b2e378a8328ab
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Disable use of Neon VFP support for platform stm32mp1 when
building with SP_MIN runtime services as these can conflict with
non-secure world use of NEON support. This is preferred over a
systematic backup/restore of NEON context when switching
between non-secure and secure worlds.
When NEON support is disabled, this is done for both BL2 and BL32 as
build process uses common libraries built once for both binaries.
Change-Id: I4e8808dcb6ef58fc839e6f85fd6e45cfbaa34be0
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
BL32/SP_MIN configures platform security hardening from the shared
resources driver. At the end of SP_MIN initialization, all shared
resources shall be assigned to secure or non-secure world by
drivers. A lock prevent from further change on the resource
assignation. By definition, resources not registered are assign
to non-secure world since not claimed by any component on the BL.
No functional change as all resources are currently in state
SHRES_UNREGISTERED hence assigned to non-secure world as prior
this change in stm32mp1_etzpc_early_setup() and
sp_min_platform_setup().
Change-Id: Ic41fab47216c3b8b7a6a75b8358cfcec411ed941
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Get number of pins in the GPIOZ bank with helper function
fdt_get_gpio_bank_pin_count(). Save the value in RAM to prevent
parsing the FDT several time for the same information.
Change-Id: Ie68e300804461ffce09914100a7d2962116023b5
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Define enum stm32mp_shres for platform stm32mp1. The enumerated
type defines all resources that can be assigned to secure or
non-secure worlds at run time for the platform.
Change-Id: I5de20d72735856645f1efd0993643278e8d35bcb
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
STM32MP1 SoC includes peripheral interfaces that can be assigned to
the secure world, or that can be opened to the non-secure world.
This change introduces the basics of a driver that manages such
resources which assignation is done at run time. It currently offers
API functions that state whether a service exposed to non-secure
world has permission to access a targeted clock or reset controller.
Change-Id: Iff20028f41586bc501085488c03546ffe31046d8
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Use ETZPC driver to configure secure aware interfaces to assign
them to non-secure world. Sp_min also configures BootROM resources
and SYSRAM to assign both to secure world only.
Define stm32mp15 SoC identifiers for the platform specific DECPROT
instances.
Change-Id: I3bec9f47b04bcba3929e4df886ddb1d5ff843089
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Changes stm32mp1 reset driver to API to add a timeout argument
to stm32mp_reset_assert() and stm32mp_reset_deassert() and
a return value.
With a supplied timeout, the functions wait the target reset state
is reached before returning. With a timeout of zero, the functions
simply load target reset state in SoC interface and return without
waiting.
Helper functions stm32mp_reset_set() and stm32mp_reset_release()
use a zero timeout and return without a return code.
This change updates few stm32 drivers and plat/stm32mp1 blé_plat_setup.c
accordingly without any functional change.
functional change.
Change-Id: Ia1a73a15125d3055fd8739c125b70bcb9562c27f
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
New helper functions to get GPIO banks configuration from the FDT.
stm32_get_gpio_bank_pinctrl_node() allows stm32mp platforms to
differentiate specific GPIO banks when these are defined with a specific
path in the FDT.
fdt_get_gpio_bank_pin_count() returns the number of pins in a GPIO bank
as it depends on the SoC variant.
Change-Id: I4481774152b3c6bf35bf986f58e357c2f9c19176
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Relation between GPIO banks and their base address and offset address
if platform dependent. This change moves helper functions
stm32_get_gpio_bank_base() and stm32_get_gpio_bank_offset() from
plat/st/common to plat/st/stm32mp1/.
Change-Id: Id3d03e585746aa5509c6fab7d88183a92d561e3f
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Now that we have an implementation for getting the node offset of the
stdout-path property in the generic fdt_wrappers code, use that to
replace the current ST platform specific implementation.
Change-Id: I5dd05684e7ca3cb563b5f71c885e1066393e057e
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The STM32 platform port parse DT nodes to find base address to
peripherals. It does this by using its own implementation, even though
this functionality is generic and actually widely useful outside of the
STM32 code.
Re-implement fdt_get_reg_props_by_name() on top of the newly introduced
fdt_get_reg_props_by_index() function, and move it to fdt_wrapper.c.
This is removes the assumption that #address-cells and #size-cells are
always one.
Change-Id: I6d584930262c732b6e0356d98aea50b2654f789d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The STM32 platform code uses its own set of FDT helper functions,
although some of them are fairly generic.
Remove the implementation of fdt_read_uint32_default() and implement it
on top of the newly introduced fdt_read_uint32() function, then convert
all users over.
This also fixes two callers, which were slightly abusing the "default"
semantic.
Change-Id: I570533362b4846e58dd797a92347de3e0e5abb75
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The device tree parsing code for the STM32 platform is using its own FDT
helper functions, some of them being rather generic.
In particular the existing fdt_read_uint32_array() implementation is now
almost identical to the new generic code in fdt_wrappers.c, so we can
remove the ST specific version and adjust the existing callers.
Compared to the original ST implementation the new version takes a
pointer to the DTB as the first argument, and also swaps the order of
the number of cells and the pointer.
Change-Id: Id06b0f1ba4db1ad1f733be40e82c34f46638551a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Instead of using dt_get_ddr_size() and withdrawing the secure and shared
memory areas, use stm32mp_get_ddr_ns_size() function.
Change-Id: I5608fd7873589ea0e1262ba7d2ee3e52b53d9a7d
Signed-off-by: Yann Gautier <yann.gautier@st.com>
DTB and BL32 area should not be set as executable in MMU during BL2
execution, hence set those areas as MT_RO_DATA.
Change-Id: I87c47a1e7fda761e541ec98a5b294588384d31db
Signed-off-by: Yann Gautier <yann.gautier@st.com>
A speculative accesses to DDR could be done whereas it was not reachable
and could lead to bus stall.
To correct this the dynamic mapping in MMU is used.
A first mapping is done for DDR tests with MT_NON_CACHEABLE attribute,
once DDR access is setup. It is then unmapped and a new mapping DDR is done
with cacheable attribute (through MT_MEMORY) to speed-up BL33 (or OP-TEE)
load.
The disabling of cache during DDR tests is also removed, as now useless.
A call to new functions stm32mp_{,un}map_ddr_non_cacheable() is done
instead.
PLAT_XLAT_TABLES_DYNAMIC is activated globally as used in BL2 and BL32.
BL33 max size is also updated to take into account the secure and shared
memory areas. Those are used in OP-TEE case.
Change-Id: I22c48b4a48255ee264991c34ecbb15bfe87e67c3
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This function gets the DDR size from DT, and withdraws (if defined) the
sizes of secure DDR and shared memory areas.
This function also checks DT values fits the default DDR range.
This non-secure memory is available for BL33 and non-secure OS.
Change-Id: I162ae5e990a0f9b6b7d07e539de029f1d61a391b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This warning was issued by cppcheck in our downstream code:
[plat/st/common/stm32mp_dt.c:629] -> [plat/st/common/stm32mp_dt.c:634]:
(warning) Identical condition 'node<0', second condition is always false
The second test has to check variable pwr_regulators_node.
Change-Id: I4a20c4a3ac0ef0639c2df36309d90a61c02b511f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Correct the following sparse warnings:
plat/st/common/stm32mp_dt.c:103:5: warning:
symbol 'fdt_get_node_parent_address_cells' was not declared.
Should it be static?
plat/st/common/stm32mp_dt.c:123:5: warning:
symbol 'fdt_get_node_parent_size_cells' was not declared.
Should it be static?
As those 2 functions are only used by assert(), put them under
ENABLE_ASSERTIONS flag.
Change-Id: Iad721f12128df83a3de3f53e7920a9c1dce64c56
Signed-off-by: Yann Gautier <yann.gautier@st.com>
* changes:
stm32mp1: platform.mk: support generating multiple images in one build
stm32mp1: platform.mk: migrate to implicit rules
stm32mp1: platform.mk: derive map file name from target name
stm32mp1: platform.mk: generate linker script with fixed name
stm32mp1: platform.mk: use PHONY for the appropriate targets
Board Support for the stm32mp1 platform is contained in the device tree,
so if we remove hardcoding of board name from the Makefile, we can build
the intermediary objects once and generate one new tf-a-*.stm32 binary
for every device tree specified. All in one go.
With implicit rules implemented, we only need to change the top level
target to support multi-image builds on the stm32mp1.
Change-Id: I4cae7d32a4c03a3c29c559dc5332e002223902c1
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Board Support for the stm32mp1 platform is contained in the device tree,
so if we remove hardcoding of board name from the Makefile, we can build
the intermediary objects once and generate one new tf-a-*.stm32 binary
for every device tree specified. All in one go.
Prepare for this by employing implicit rules.
Change-Id: I5a022a89eb12696cd8cee7bf28ac6be54849901f
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Doing this allows us in the next commit to use implicit rules (%-patterns)
to cover all the images we generate during a stm32mp1 build.
Change-Id: Ibde59d10ccce42566f82820117d7fd0d77345e6c
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
The linker script has no board-specific information that necessitates it
having a name derived from the board name. Give it a fixed name, so we
can later reuse the same linker script for multiple boards.
Change-Id: Ie6650f00389f4ab8577ae82a36c620af9c64101e
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Currently, building TF-A for STM32MP1 triggers a full rebuild,
avoid this by removing the .PHONY: specification for the final image and
replace it by specifying PHONYness for the targets that don't actually
produce file output.
This will come in handy in follow-up commits, when implicit rules are
introduced, as implicit rule search is skipped for .PHONY targets.
Change-Id: Ib9966479032b081a54123b99f889760e85639f19
Fixes: f74cbc93a ("stm32mp1: Link BL2, BL32 and DTB in one binary")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: Iea6ca26ff4903c33f0fad27fec96fdbabd4e0a91
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
This flag warns if anything is declared more than once in the same
scope, even in cases where multiple declaration is valid and changes
nothing.
Consequently, this patch also fixes the issues reported by this
flag. Consider the following two lines of code from two different source
files(bl_common.h and bl31_plat_setup.c):
IMPORT_SYM(uintptr_t, __RO_START__, BL_CODE_BASE);
IMPORT_SYM(unsigned long, __RO_START__, BL2_RO_BASE);
The IMPORT_SYM macro which actually imports a linker symbol as a C expression.
The macro defines the __RO_START__ as an extern variable twice, one for each
instance. __RO_START__ symbol is defined by the linker script to mark the start
of the Read-Only area of the memory map.
Essentially, the platform code redefines the linker symbol with a different
(relevant) name rather than using the standard symbol. A simple solution to
fix this issue in the platform code for redundant declarations warning is
to remove the second IMPORT_SYM and replace it with following assignment
static const unsigned long BL2_RO_BASE = BL_CODE_BASE;
Change-Id: If4835d1ee462d52b75e5afd2a59b64828707c5aa
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
STM32MP1 platform is able to boot from SPI-NOR devices.
These modifications add this support using the new
SPI-NOR framework.
Change-Id: I75ff9eba4661f9fb87ce24ced2bacbf8558ebe44
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
STM32MP1 platform is able to boot from SPI-NAND devices.
These modifications add this support using the new
SPI-NAND framework.
Change-Id: I0d5448bdc4bde153c1209e8043846c0f935ae5ba
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
STM32MP1 platform is able to boot from raw NAND devices.
These modifications add this support using the new
raw NAND framework.
Change-Id: I9e9c2b03930f98a5ac23f2b6b41945bef43e5043
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
For STM32MP1, the address space is 4GB, which can be first divided
in 4 parts of 1GB. This LVL1 table is already mapped regardless
of MAX_XLAT_TABLES.
Fixing typo: Replace Ko to KB.
BL2/sp_min for platform STM32MP1 requires 4 MMU translation tables:
- a level2 table and a level3 table for identity mapped SYSRAM
- a level2 table mapping 2MB of BootROM runtime resources
- a level2 table mapping 2MB of secure DDR (case BL32 is OP-TEE)
Change-Id: If80cbd4fccc7689b39dd540d6649b1313557f326
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Add a new entry to find register properties by name and
include new assert functions to limit address cells to 1
and size cells to 1.
Change-Id: Ide59a795a05fb2af36bd07fec15e5a3adf196226
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Adds compilation flags to specify which drivers will be
embedded in the generated firmware.
Change-Id: Ie9decc89c3f26cf17e7148a3a4cf337fd35940f7
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Introduce timeout_init_us/timeout_elapsed() delay tracking with CNTPCT.
timeout_init_us(some_timeout_us); returns a reference to detect
timeout for the provided microsecond delay value from current time.
timeout_elapsed(reference) return true/false whether the reference
timeout is elapsed.
Cherry picked from OP-TEE implementation [1].
[1] commit 33d30a74502b ("core: timeout detection support")
Minor:
- Remove stm32mp platform duplicated implementation.
- Add new include in marvell ble.mk
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iaef6d43c11a2e6992fb48efdc674a0552755ad9c
This commit adds authentication binary support for STM32MP1.
It prints the bootrom authentication result if signed
image is used and authenticates the next loaded STM32 images.
It also enables the dynamic translation table support
(PLAT_XLAT_TABLES_DYNAMIC) to use bootrom services.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iba706519e0dc6b6fae1f3dd498383351f0f75f51
This BSEC service is a platform specific service. Implementation
moved to the platform part.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I1f70ed48a446860498ed111acce01187568538c9
The STM32 console driver was pre-pending '\r' before '\n'.
It is now managed by the framework with the flag:
CONSOLE_FLAG_TRANSLATE_CRLF.
Remove the code in driver, and add the flag for STM32MP1.
Change-Id: I5d0d5d5c4abee0b7dc11c2f8707b1b5cf10149ab
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This function can be used on several stm32mp devices, it is then moved in
plat/st/common/stm32mp_common.c.
Change-Id: I862debe39604410f71a9ddc28713026362e9ecda
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The runtime console is only kept in DEBUG configuration.
Change-Id: I0447dfcacb9a63a12bcdab7c55584d70c3220e5b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This change enhances performance and security in BL32 stage.
Change-Id: I64df5995fc6b04f6cf42d6a00a6d3d0f602b5407
Signed-off-by: Yann Gautier <yann.gautier@st.com>
To use spinlocks, MMU should be enabled, as well as data cache.
A common function is created (moved from clock file).
It is then used whenever a spinlock has to be taken, in BSEC and clock
drivers.
Change-Id: I94baed0114a2061ad71bd5287a91bf7f1c6821f6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Among the variants of STM32MP, the STM32MP151 is a single Cortex-A7 chip.
A function is added to check the part number of the SoC.
If it corresponds to STM32MP151A or STM32MP151C, then the chip has a single
Cortex-A7.
Change-Id: Icac2015c5d03ce0bcb8e99bbaf1ec8ada34be49c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
On STMicroelectronics boards, the board information is stored in OTP.
This OTP is described in device tree, in BSEC board_id node.
Change-Id: Ieccbdcb048343680faac8dc577b75c67ac106f5b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
This information is located in DBGMCU registers.
Change-Id: I480aa046fed9992e3d9665b1f0520bc4b6cfdf30
Signed-off-by: Yann Gautier <yann.gautier@st.com>