ROMLIB extract functions code from BL images to put them inside ROM.
This has for effect to reduce the size of the BL images.
This patch take this size reduction into consideration to optimize the
memory layout of BL2.
A new "PLAT_ARM_BL2_ROMLIB_OPTIMIZATION" macro is defined and used to
reduce "PLAT_ARM_MAX_BL2_SIZE". This allows to remove the gap between
BL1 and BL2 when ROMLIB is used and provides more room for BL31.
The current memory gain is 0x6000 for fvp and 0x8000 for juno.
Change-Id: I71c2c2c63b57bce5b22a125efaefc486ff3e87be
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
* changes:
Tegra194: add macros for security carveout configuration registers
Tegra194: add 'TEGRA_TMRUS_SIZE' macro
Tegra194: Fix TEGRA186_SMMU_CTX_SIZE
Tegra194: Dont run MCE firmware on Emulation
Tegra194: remove GPU, MPCORE and PTC registers from streamid list
Tegra194: Support SMC64 encoding for MCE calls
Tegra194: Enable MCE driver
Tegra194: enable SMMU
Tegra194: add support for multiple SMMU devices
Tegra194: add SMMU and mc_sid support
Tegra194: psci: support for 64-bit TZDRAM base
Tegra194: base commit for the platform
Revert "Tegra: Add support for fake system suspend"
N1SDP supports multichip configuration wherein n1sdp boards are
connected over high speed coherent CCIX link, for now only dual-chip
is supported.
Whether or not multiple chips are present is dynamically probed by
SCP firmware and passed on to TF-A, routing table will be set up
only if multiple chips are present.
Initialize GIC-600 multichip operation by overriding the default GICR
frames with array of GICR frames and setting the chip 0 as routing
table owner.
Change-Id: Ida35672be4bbf4c517469a5b330548d75e593ff2
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Earlier PIE support was enabled for all arm platforms when
RESET_TO_BL31=1, but later on it was restricted only to FVP with patch
SHA d4580d17 because of n1sdp platform.
Now it has been verified that PIE does work for n1sdp platform also, so
enabling it again for all arm platforms.
Change-Id: I05ad4f1775ef72e7cb578ec9245cde3fbce971a5
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
ARM platform can have a non-contiguous GICR frames. For instance, a
multi socket platform can have two or more GIC Redistributor frames
which are 4TB apart. Hence it is necessary for the `gicv3_rdistif_probe`
function to probe all the GICR frames available in the platform.
Introduce `plat_arm_override_gicr_frames` function which platforms can
use to override the default gicr_frames which holds the GICR base
address of the primary cpu.
Change-Id: I1f537b0d871a679cb256092944737f2e55ab866e
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
N1SDP supports multichip configuration wherein n1sdp boards are
connected over high speed coherent CCIX link for now only dual-chip is
supported.
A single instance of TF-A runs on master chip which should be aware of
slave chip's CPU and memory topology.
This patch updates platform macros to include remote chip's information
and also ensures that a single version of firmware works for both single
and dual-chip setup.
Change-Id: I75799fd46dc10527aa99585226099d836c21da70
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Platform information structure holds information about platform's DDR
size(local/remote) which will be used to zero out the memory before
enabling the ECC capability as well as information about multichip
setup. Multichip and remote DDR information can only be probed in SCP,
SDS region will be used by TF-A to get this information at boot up.
This patch introduces a new SDS to store platform information, which is
populated dynamically by SCP Firmware.previously used mem_info SDS is
also made part of this structure itself.
The platform information is also passed to BL33 by copying it to Non-
Secure SRAM.
Change-Id: I4781dc6a7232c3c0a3219b164d943ce9e3e469ee
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Running TF-A from non-standard location such as DRAM is useful for some
SRAM heavy use-cases. Allow the TF-A binary to be executed from an
arbitrary memory location.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Change-Id: Icd97926e4d97f37d7cde4a92758a52f57d569111
This patch adds macros defining the generalised security carveout
registers. These macros help us program the TZRAM carveout access
and the Video Protect Clear carveout access.
Change-Id: I8f7b24b653fdb702fb57a4097801cb3eae050294
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch defines the macro for the TEGRA_TMRUS aperture size.
Change-Id: I33fb674c6a7be8d02971667e7bf8650b7adc62ef
Signed-off-by: Steven Kao <skao@nvidia.com>
TEGRA186_SMMU_CTX_SIZE should match the numbe of elements
in smmu_ctx_regs, which is defined in smmu_plat_config.h.
The current number of elements are 0x490.
Change-Id: If0614ea8ef8b6a8f5da1a3279abaf9255eb76420
Signed-off-by: Stefan Kristiansson <stefank@nvidia.com>
Dont run MCE firmware on pre-silicon emulation platforms
Change-Id: I2a8d653e46f494621580ca92271a18e62f648859
Signed-off-by: Rohit Khanna <rokhanna@nvidia.com>
GPU, MPCORE and PTC clients are changed and not going through SMMU.
Removing it from streamid list.
Change-Id: I14b450a11f02ad6c1a97e67e487d6d624911d019
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
This patch uses SMC64 encoding for all MCE SMC calls originating
from the linux kernel.
Change-Id: Ic4633de5c638566012db033bbaf8c9d9343acdc0
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enable MCE driver for T19x SoC. The MCE driver
takes care of the communication with the MCE firmware to
achieve:
- Cold boot
- Warm boot
- Core/Cluster/System Power management
- Custom MCE requests
Change-Id: I75854c0b649a691e9b244d9ed9fc1c19743e3e8d
Signed-off-by: Steven Kao <skao@nvidia.com>
This patch adds support for all three SMMU devices present on the SoC.
The following changes have been done:
Add SMMU devices to the memory map
Update register read and write functions
Change-Id: I0007b496d2ae7264f4fa9f605d4b0a15fa747a0f
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Define mc sid and txn override regs and sec cfgs.
Create array for mc sid override regs and sec config that is
used to initialize mc.
Add smmu ctx regs array to hold register values during suspend.
Change-Id: I7b265710a9ec2be7dea050058bce65c614772c78
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
This patch fixes the variable width to store the TZDRAM base
address used to resume from System Suspend.
Change-Id: I3c18eb844963f39f91b5ac45e3709f3354bcda0c
Signed-off-by: Steven Kao <skao@nvidia.com>
This patch creates the base commit for the Tegra194 platform, from
Tegra186 code base.
Change-Id: I1c77e4984f7ff39655f3fb79633d13d533707ede
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This reverts commit c41df8fda84b9bc56bbb2347fb902f64b1bb557e
Fake system suspend relies on software running on EL3
to trigger a warm reset.
Revert enabling fake system suspend, as the software
running on El3 is not allowed to trigger a warm reset.
Change-Id: I6035f2a7bcb0a4ad50a62c5bc5239226c625ee5e
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>
There are some platforms which uses MPIDR Affinity level 3 for storing
extra affinity information e.g. N1SDP uses it for keeping chip id in a
multichip setup, for such platforms MPIDR validation should not fail.
This patch adds Aff3 bits also as part of mpidr validation mask, for
platforms which does not uses Aff3 will not have any impact as these
bits will be all zeros.
Change-Id: Ia8273972fa7948fdb11708308d0239d2dc4dfa85
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Introduce timeout_init_us/timeout_elapsed() delay tracking with CNTPCT.
timeout_init_us(some_timeout_us); returns a reference to detect
timeout for the provided microsecond delay value from current time.
timeout_elapsed(reference) return true/false whether the reference
timeout is elapsed.
Cherry picked from OP-TEE implementation [1].
[1] commit 33d30a74502b ("core: timeout detection support")
Minor:
- Remove stm32mp platform duplicated implementation.
- Add new include in marvell ble.mk
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iaef6d43c11a2e6992fb48efdc674a0552755ad9c
a5ds only has always-on power domain and there is no power control
present. However, without the pwr_domain_off handler, the kernel
panics when the user will try to switch off secondary cores. The
a5ds_pwr_domain_off handler will prevent kernel from crashing,
i.e. the kernel will attempt but fail to shut down the secondary CPUs
if the user tries to switch them offline.
Change-Id: I3c2239a1b6f035113ddbdda063c8495000cbe30c
Signed-off-by: Usama Arif <usama.arif@arm.com>
This patch adds mapping for secure FLASH0 for qemu/virt and
qemu/qemu_sbsa platforms. This change is targeted for sbsa but since both
platforms share common code, changes in common defines was necessary.
For qemu_sbsa, this patch adds necessary mapping in order to boot without
semi-hosting from secure FLASH0. EFI need to stay in FLASH1 (share it with
variables) since it need to "run in place" in non secure domain. Changes
for this are under RFC at edk2-platforms mailing list:
https://patches.linaro.org/patch/171327/
(edk2-platforms/Platform/Qemu/SbsaQemu/SbsaQemu.dsc).
In docs qemu/virt is described as using semi-hosting, therefore this change
should be orthogonal to existing assumptions while giving possibility to
store both bl1 and fip in FLASH0 at some point (additional changes required
for that).
Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Change-Id: I782bc3637c91c01eaee680b3c5c408e24b4b6e28
This patch introduces Qemu SBSA platform.
Both platform specific files where copied from qemu/qemu with changes for
DRAM base above 32bit and removal of ARMv7 conditional defines/code.
Documentation is aligned to rest of SBSA patches along the series and
planed changes in edk2-platform repo.
FixesARM-software/tf-issues#602
Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Change-Id: I8ebc34eedb2268365e479ef05654b2df1b99128c
* changes:
stm32mp1: add authentication support for stm32image
bsec: move bsec_mode_is_closed_device() service to platform
crypto: stm32_hash: Add HASH driver
* changes:
amlogic: g12a: Add support for the S905X2 (G12A) platform
amlogic: makefile: Use PLAT variable when possible
amlogic: sha_dma: Move register mappings to platform header
* changes:
rpi4: Add initial documentation file
rpi4: Add stdout-path to device tree
rpi4: Add GIC maintenance interrupt to GIC DT node
rpi4: Cleanup memory regions, move pens to first page
rpi4: Reserve resident BL31 region from non-secure world
rpi4: Amend DTB to advertise PSCI
rpi4: Determine BL33 entry point at runtime
rpi4: Accommodate "armstub8.bin" header at the beginning of BL31 image
Add basic support for Raspberry Pi 4
rpi3: Allow runtime determination of UART base clock rate
FDT helper functions: Respect architecture in PSCI function IDs
FDT helper functions: Add function documentation
* changes:
Migrate ARM platforms to use the new GICv3 API
Adding new optional PSCI hook pwr_domain_on_finish_late
GICv3: Enable multi socket GIC redistributor frame discovery
Introduce the preliminary support for the Amlogic S905X2 (G12A) SoC.
This port is a minimal implementation of BL31 capable of booting
mainline U-Boot and Linux. Tested on a SEI510 board.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ife958f10e815a4530292c45446adb71239f3367f
This patch invokes the new function gicv3_rdistif_probe() in the
ARM platform specific gicv3 driver. Since this API modifies the
shared GIC related data structure, it must be invoked coherently
by using the platform specific pwr_domain_on_finish_late hook.
Change-Id: I6efb17d5da61545a1c5a6641b8f58472b31e62a8
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Some device tree users like to find a pointer to the standard serial
console in the device tree, in the "stdout-path" property of the /chosen
node.
Add the location of the Mini UART in that property, so that DT users are
happy, for instance Linux' earlycon detection.
Change-Id: I178e55016e5640de5ab0bc6e061944bd3583ea96
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
For being able to use the virtualisation support the GIC offers, we need
to know the interrupt number of the maintenance interrupt. This
information is missing from the official RPi4 device tree.
Use libfdt to add the "interrupts" property to the GIC node, which
allows hypervisors like KVM or Xen to be able to use the GIC's help on
virtualising interrupts.
Change-Id: Iab84f0885a5bf29fb84ca8f385e8a39d27700c75
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Now that we have the SMP pens in the first page of DRAM, we can get rid
of all the fancy RPi3 memory regions that our RPi4 port does not really
need. This avoids using up memory all over the place, restricting ATF
to just run in the first 512KB of DRAM.
Remove the now unused regions. This also moves the SMP pens into our
first memory page (holding the firmware magic), where the original
firmware put them, but where there is also enough space for them.
Since the pens will require code execution privileges, we amend the
memory attributes used for that page to include write and execution
rights.
Change-Id: I131633abeb4a4d7b9057e737b9b0d163b73e47c6
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The GPU firmware loads the armstub8.bin (BL31) image at address 0, the
beginning of DRAM. As this holds the resident PSCI code and the SMP
pens, the non-secure world should better know about this, to avoid
accessing memory owned by TF-A. This is particularly criticial as the
Raspberry Pi 4 does not feature a secure memory controller, so
overwriting code is a very real danger.
Use the newly introduced function to add a node into reserved-memory
node, where non-secure world can check for regions to be excluded from
its mappings.
Reserve the first 512KB of memory for now. We can refine this later if
need be.
Change-Id: I00e55e70c5c02615320d79ff35bc32b805d30770
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The device tree provided by the official Raspberry Pi firmware uses
spin tables for SMP bringup.
One of the benefit of having TF-A is that it provides PSCI services, so
let's rewrite the DTB to advertise PSCI instead of spin tables.
This uses the (newly exported) routine from the QEMU platform port.
Change-Id: Ifddcb14041ca253a333f8c2d5e97a42db152470c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>