Added some RCPM2 register offset definiton for register: IPSTPCR,
IPSTPACKR and POWMGTDCR, also added OVRD bit definiton of register
POWMGTDCR.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I301bc1401e053c2089b5eb3672c6e649c805a2ab
total_dram_size should be signed value because it is equal to return
value of init_ddr(), so if it is lower or equal zero, report
error as DDR is not initialized correctly.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Idbc40da103f60f10cb18c5306e97b764c1a9d372
Add helper function to disable the load-store prefetch.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I36d7be37e0b800ab1e5842a56cfd04d779338868
* changes:
feat(stm32mp1): enable BL2_IN_XIP_MEM to remove relocation sections
refactor(stm32mp1): reduce MMU memory regions and split XLAT by context
feat(st): map 2MB for ROM code
fix(stm32mp1): restrict DEVICE2 mapping in BL2
Because the BL2 is not relocated, the usage of BL2_IN_XIP_MEM
can be used. It reduces the binary size by removing all relocation
sections. XIP will not be used when STM32MP_USE_STM32IMAGE is
defined. Introduce new definitions for SEPARATE_CODE_AND_RODATA.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Ifd76f14e5bc98990bf84e0bfd4ee0b4e49a9a293
Simplify the BL2 MMU mapping and reduce the memory regions
number. Split the XLAT define between BL2 and BL32 as binaries
do not share the same tables anymore.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iaf09e72b4cc29acbe376f6f1cd2a8116c793ba26
This allows reducing MMU tables, and as there is nothing after ROM code
in memory mapping, this has no impact.
Change-Id: If51facb96a523770465cb06eb1ab400f75d26db3
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Only NAND memory map area can be of interest for BL2 in the
DEVICE2 area. Map DEVICE2 under STM32MP_RAW_NAND flag.
Change-Id: I7e3b39579e4a2525b25cb1987d6ec38038d0de2b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
* changes:
refactor(st-ddr): move basic tests in a dedicated file
refactor(st-ddr): reorganize generic and specific elements
feat(stm32mp1): allow configuration of DDR AXI ports number
refactor(st-ddr): update parameter array initialization
feat(st-ddr): add read valid training support
refactor(stm32mp1): remove the support of calibration result
fix(st-ddr): correct DDR warnings
As the UART is already initialized, no need to check for UART clock
or reset in next BL. An issue can appear if the next BL device tree
(e.g HW_CONFIG) doesn't use the same clocks or resets (like SCMI ones).
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I044ef2386abe2d3dba5a53c3685440d64ca50a4f
This patch includes the errata workaround for erratum
1868343 for the Morello platform.
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
Change-Id: Ifea8148e10946db2276560f90bf2f32bf12b9dcc
* changes:
feat(plat/rcar3): update IPL and Secure Monitor Rev.3.0.3
feat(plat/rcar3): modify type for Internal function argument
feat(plat/rcar3): modify sequence for update value for WUPMSKCA57/53
fix(plat/rcar3): fix to bit operation for WUPMSKCA57/53
These basic tests are generic and should be used independently of the
driver, depending on the plaftorm characteristics.
Change-Id: I38161b659ef2a23fd30a56e1c9b1bd98461a2fe4
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@foss.st.com>
stm32mp_ddrctl structure contains DDRCTRL registers definitions.
stm32mp_ddr_info contains general DDR information extracted from DT.
stm32mp_ddr_size moves to the generic side.
stm32mp1_ddr_priv contains platform private data.
stm32mp_ddr_dt_get_info() and stm32mp_ddr_dt_get_param() allow to
retrieve data from DT. They are located in new generic c/h files in
which stm32mp_ddr_param structure is declared. Platform makefile
is updated.
Adapt driver with this new classification.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I4187376c9fff1a30e7a94407d188391547107997
A new flag STM32MP_DDR_DUAL_AXI_PORT is added, and enabled by default.
It will allow choosing single or dual AXI ports for DDR.
Change-Id: I48826a66a6f4d18df87e081c0960af89ddda1b9d
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Refactor the GPIO code to use a small lookup table instead of redundant or
repetitive code.
Signed-off-by: Jona Stubbe <tf-a@jona-stubbe.de>
Change-Id: Icf60385095efc1f506e4215d497b60f90e16edfd
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
On closed chips, it is not allowed to open debug. The BSEC debug
register can not be rewritten.
On open chips, the debug is already open, no need to rewrite this
register. This part of code is just removed.
An INFO message is displayed if debug is disabled.
The freeze of the watchdog during debug is also removed.
In case of debug, this must be managed by the software that enables
the debugger.
Change-Id: I19fbd3c487bb1018db30fd599cfa94fe5090899f
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Add function headers to improve readability.
Add asserts when required.
Use RCC_BASE address.
Change-Id: Ia545293f00167b6276331a986ea7aa08c006e004
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
According to ST Application note AN5256 [1], the minimum reset pulse
duration should be set to 31ms on boards powered with discrete
regulators.
[1] https://www.st.com/resource/en/application_note/dm00561921.pdf
Change-Id: Ib6ed029ee8a4b95f75a80948fdd2154b4ebe484f
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
We don't use mbox drivers which are implemented in these files for
mcdi, so remove related files from mcdi folder.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Idea5ebe5b25f91066ebd653cdcdafe65ca292b0f
For somewhat historical reasons we are doing some initial PMIC regulator
setup in BL31, as U-Boot does not (yet) have a PMIC driver. This worked
fine so far, but there is at least one board (OrangePi 3) that gets upset,
because the Ethernet PHY needs some *coordinated* bringup of *two*
regulators.
To avoid custom hacks, let's introduce a build option to keep doing the
regulator setup in TF-A. Defining SUNXI_SETUP_REGULATORS to 0 will break
support for some devices on some boards in U-Boot (Ethernet and HDMI),
but will allow to bring up the OrangePi 3 in Linux correctly. We keep
the default at 1 to not change the behaviour for all other boards.
After U-Boot gained proper PMIC support at some point in the future, we
will probably change the default to 0, to get rid of the less optimal
PMIC code in TF-A.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Ie8e2583d0396f6eeaae8ffe6b6190f27db63e2a7
Use regulator framework to get CPU and VDD power supplies.
Change-Id: Ice745fb21ff10e71ef811e747165499c2e19253e
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
print_pmic_info_and_debug() prints the PMIC version ID and displays
regulator information if debug is enabled.
It is under DEBUG flag and called after initialize_pmic() in BL2.
Change-Id: Ib81a625740b7ec6abb49cfca05e44c69efaa4718
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
SYSCFG can be initialized later, after console is up, to display the
warnings or messages it could issue.
PMIC should be initialized earlier, before SYSCFG init.
Change-Id: Icc3a1366083a1b1fde7f0e173645449b4c04c49b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This is mainly a clock interface with clk_ops callbacks.
Those callbacks are: enable, disable, get_rate, set_parent,
and is_enabled.
This framework is compiled for STM32MP1.
Change-Id: I5119a2aeaf103ceaae7a60d9e423caf0c148d794
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Currently only UART0 is handled as console device, fix the
code to support UART1 as console also.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: Ifcd3c331cf6ce4afb0074357c92fc4addb9438b6
Currently only UART0 is handled as console device, fix the
code to support UART1 as console also.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I08f69b65b78b967ceb7159f4a467aa5982b1f791
Add MCDI related drivers to handle CPU powered on/off in CPU suspend.
TEST=build pass
BUG=b:202871018
Change-Id: I85aaaf3a0e992a39d17c58f3d9d5ff1b5770f748
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Implement PSCI platform operations to support CPU hotplug and MCDI.
TEST=bringup 8 CPUs successfully on kernel stage.
BUG=b:202871018
Change-Id: Ibd5423b70b3ca3f91edaa48d7ca5bc094e751510
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
In mt8186 suspend/resume flow, ATF has to communicate with a subsys by
read/write the subsys registers. However, the register region of subsys
doesn't include in the MMU mapping region. It triggers MMU faults.
This patch extends the MMU region 0 size to cover all mt8186 HW modules.
This patch also remove MMU region 1 because region 0 covers region 1.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I520c51338578bd68756cd02603ce6783f93daf51