This patch makes changes required to get the morello
platform working with the tip of TF-A.
Change-Id: I095006615c9959bba49fcc75b52e1de7d7486309
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
* changes:
arm_fpga: Add platform documentation
arm_fpga: Add post-build linker script
arm_fpga: Add ROM trampoline
arm_fpga: Add devicetree file
arm_fpga: Remove SPE PMU DT node if SPE is not available
arm_fpga: Adjust GICR size in DT to match number of cores
fdt: Add function to adjust GICv3 redistributor size
drivers: arm: gicv3: Allow detecting number of cores
For the Arm Ltd. FPGAs to run, we need to load several payloads into the
FPGA's memory:
- Some trampoline code at address 0x0, to jump to BL31's entry point.
- The actual BL31 binary at the beginning of DRAM.
- The (generic) DTB image to describe the hardware.
- The actual non-secure payloads (kernel, ramdisks, ...)
The latter is application specific, but the first three blobs are rather
generic.
Since the uploader tool supports ELF binaries, it seems helpful to
combine these three images into one .axf file, as this also simplifies
the command line.
Add a post-build linker script, that combines those three bits into one
ELF file, together with their specific load addresses.
Include a call to "ld" with this linker script in the platform Makefile,
so it will be build automatically. The result will be called "bl31.axf".
Change-Id: I4a90da16fa1e0e83b51d19e5b1daf61f5a0bbfca
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The application cores of the FPGAs used in Arm Ltd. start execution at
address 0x0. This is the location of some (emulated) ROM area (which can
be written to by the uploading tool).
Since the arm_fpga port is configured to run from DRAM, we load BL31 to
the beginning of DRAM (mapped at 2GB). This requires some small
trampoline code in the "ROM" to jump to the BL31 entry point.
To avoid some extra magic binary, add a tiny assembly file with that
trivial jump instruction to the tree, so this binary can be created
alongside BL31.
Change-Id: I9e4439fc0f093fa24dd49a8377c9edb030fbb477
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The FPGA images used in Arm Ltd. focus on CPU cores, so they share a
common platform, with a minimal set of peripherals (interconnect, GIC,
UART).
This allows to support most platforms with a single devicetree file.
The topology and number of CPU cores differ, but those will added at
runtime, in BL31. Other adjustments (GICR size, SPE node, command line)
are also done at this point.
Add the common devicetree file to TF-A's build system, so it can be
build together with BL31. At runtime, the resulting .dtb file should be
uploaded to the address given with FPGA_PRELOADED_DTB_BASE at build time.
Change-Id: I3206d6131059502ec96896e95329865452c9d83e
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The Statistical Profiling Extension (SPE) is an architectural feature we
can safely detect at runtime. However it still relies on one piece of
platform-specific information: the interrupt line it is connected
to. This requires SPE to be described in a devicetree node.
Since SPE support varies with the CPU cores found on an FPGA image, we
should detect the presence of SPE at runtime, and remove a potentially
existing SPE PMU node from the DT.
This allows to always have the SPE node in a generic devicetree file,
without risking exposing it on a CPU without this feature.
Change-Id: I73d83ea8509b03fe7bba20b9cce8d1335035fa31
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The size of a GICv3 redistributor region depends on the number of
cores in the system. For the ARM FPGA port, we detect the topology at
runtime, and adjust the CPU DT nodes accordingly.
Now the size of the GICR region must also be adjusted, or Linux will
fail to initialise the GICv3.
Use the newly introduced function to overwrite the GICR size entry in
the GICv3 reg property. We count the number of existing cores by
iterating over the GICR frames until we find the LAST bit set in TYPER.
Change-Id: Ib69565600859de9b1b15ceb8495172cd26d16fce
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* changes:
plat/arm: Add platform support for Morello
fdts: add device tree sources for morello platform
lib/cpus: add support for Morello Rainier CPUs
This patch adds support for Morello platform.
It is an initial port which includes only BL31 support
as the System Control Processor (SCP) is expected to take
the role of primary bootloader.
Change-Id: I1ecbe5a14a2d487b2ecea3c1ca227f08473ed2dd
Co-authored-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Signed-off-by: Anurag Koul <anurag.koul@arm.com>
This patch allows the system to fallback to a default CPU library
in case the MPID does not match with any of the supported ones.
This feature can be enabled by setting SUPPORT_UNKNOWN_MPID build
option to 1 (enabled by default only on arm_fpga platform).
This feature can be very dangerous on a production image and
therefore it MUST be disabled for Release images.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I0df7ef2b012d7d60a4fd5de44dea1fbbb46881ba
According to [1] and in context of FF-A v1.0 a secure partition must
have either one EC (migratable UP) or a number of ECs equal to the
number of PEs (pinned MP). Adjust the SPMC manifest such that the
number of ECs is equal to the number of PEs.
[1] https://trustedfirmware-a.readthedocs.io/en/latest/components/
secure-partition-manager.html#platform-topology
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Ie8c7d96ae7107cb27f5b97882d8f476c18e026d4
Increased BL2 maximum size when CoT descriptors are placed
in device tree.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I6466d2841e189e7f15eb4f1a8db070542893cb5b
The size of debug binaries of SCP has increased beyond the current
limit of 80kB set in platform. Hence, increase it to 128kB.
Change-Id: I5dbcf87f8fb35672b39abdb942c0691fb339444a
Signed-off-by: Usama Arif <usama.arif@arm.com>
UUID's in the device tree files were stored in little endian. So
to keep all entries in these files RFC 4122 compliant, store them in
big endian then convert it to little endian when they are read so they
can be used in the UUID data structure.
Signed-off-by: Ruari Phipps <ruari.phipps@arm.com>
Change-Id: I5674159b82b245104381df10a4e3291160d9b3b5
At the moment BL31 dynamically discovers the CPU topology of an FPGA
system at runtime, but does not export it to the non-secure world.
Any BL33 user would typically looks at the devicetree to learn about
existing CPUs.
This patch exports a minimum /cpus node in a devicetree to satisfy
the binding. This means that no cpumaps or caches are described.
This could be added later if needed.
An existing /cpus node in the DT will make the code bail out with a
message.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I589a2b3412411a3660134bdcef3a65e8200e1d7e
This patch adds dependencies to the generated configuration
files that are included in the FIP. This fixes occasional
build errors that occur when the FIP happens to be built first.
Change-Id: I5a2bf724ba3aee13954403b141f2f19b4fd51d1b
Signed-off-by: Anders Dellien <anders.dellien@arm.com>
Using the Fconf, register base address of the various nv-counters
(currently, trusted, non-trusted nv-counters) are moved to the
device tree and retrieved during run-time. This feature is
enabled using the build option COT_DESC_IN_DTB.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I236f532e63cea63b179f60892cb406fc05cd5830
Allocated 512-959 SPI numbers for remote n1sdp chip and same has been
referenced for GIC routing table.
Change-Id: Id79ea493fd665ed93fe9644a59e363ec10441098
Signed-off-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com>
Add information about the third partition so it can be loaded into SPM
when running the tests
Signed-off-by: Ruari Phipps <ruari.phipps@arm.com>
Change-Id: I5544e88df391ef294ddf6b5750d468d3e74892b1
Implemented platform functions to retrieve the soc-id information
for juno platform
Change-Id: Ie677120710b45e202a2d63a954459ece8a64b353
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Implemented platform functions to retrieve the soc-id information
for FVP platform.
Change-Id: Id3df02ab290a210310e8d34ec9d706a59d817517
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
SP804 TIMER is not platform specific, and current code base adds
multiple defines to use this driver. Like FVP_USE_SP804_TIMER and
FVP_VE_USE_SP804_TIMER.
This patch removes platform specific build flag and adds generic
flag `USE_SP804_TIMER` to be set to 1 by platform if needed.
Change-Id: I5ab792c189885fd1b98ddd187f3a38ebdd0baba2
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
* changes:
SPM: Add owner field to cactus secure partitions
SPM: Alter sp_gen.mk entry depending on owner of partition
plat/arm: enable support for Plat owned SPs
For supporting dualroot CoT for Secure Partitions a new optional field
"owner" is introduced which will be used to sign the SP with
corresponding signing domain. To demonstrate its usage, this patch adds
owners to cactus Secure Partitions.
Signed-off-by: Ruari Phipps <ruari.phipps@arm.com>
Change-Id: I7b760580355fc92edf5402cecc38c38125dc1cae
This resolves MISRA defects such as:
plat/common/plat_bl1_common.c:63:[MISRA C-2012 Rule 14.4 (required)]
The condition expression "1" does not have an essentially boolean type.
Change-Id: I679411980ad661191fbc834a44a5eca5494fd0e2
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Following merge of patchset [1] the spm_mm_boot_info_t structure is
included in few platform files unconditionally even when SPM_MM option
is disabled.
[1] https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/2647
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I68bc034c9348b5d9bcfd2e5217b781df5ad1b369
The command line for BL33 payloads is typically taken from the DTB. On
"normal" systems the bootloader will put the right version in there, but
we typically don't use one on the FPGAs.
To avoid editing (and possibly re-packaging) the DTB for every change in
the command line, try to read it from some "magic" memory location
instead. It can be easily placed there by the tool that uploads the
other payloads to the FPGA's memory. BL31 will then replace the existing
command line in the DTB with that new string.
To avoid reading garbage, check the memory location for containing a
magic value. This is conveniently chosen to be a simple ASCII string, so
it can just preceed the actual command line in a text file:
--------------------------------
CMD:console=ttyAMA0,38400n8 debug loglevel=8
--------------------------------
Change-Id: I5923a80332c9fac3b4afd1a6aaa321233d0f60da
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Provide manifest and build options to boot OP-TEE as a
guest S-EL1 Secure Partition on top of Hafnium in S-EL2.
Increase ARM_SP_MAX_SIZE to cope with OP-TEE debug build image.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Idd2686fa689a78fe2d05ed92b1d23c65e2edd4cb
As secondary cores show up, they populate an array to
announce themselves so plat_core_pos_by_mpidr() can
return an invalid COREID code for any non-existing
MPIDR that it is queried about.
The Power Domain Tree Description is populated with
a topology based on the maximum harcoded values.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I8fd64761a2296714ce0f37c46544f3e6f13b5f61
In BL2, fw_config's population happened before the cache gets
enabled.
Hence to boost the performance, moved fw_config's population
after cache gets enabled (i.e. after MMU gets enabled).
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I2e75cabd76b1cb7a660f6b72f409ab40d2877284
This patch adds support for Measured Boot functionality
to FVP platform code. It also defines new properties
in 'tpm_event_log' node to store Event Log address and
it size
'tpm_event_log_sm_addr'
'tpm_event_log_addr'
'tpm_event_log_size'
in 'event_log.dtsi' included in 'fvp_tsp_fw_config.dts'
and 'fvp_nt_fw_config.dts'. The node and its properties
are described in binding document
'docs\components\measured_boot\event_log.rst'.
Change-Id: I087e1423afcb269d6cfe79c1af9c348931991292
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
TBBR authentication framework depends on the plat_get_rotpk_info()
function to return the pointer to the Root of Trust Public Key (ROTPK)
stored in the platform along with its length. Add this function for
RD-Daniel Config-XLR platform to support Trusted Board Boot. The
function makes use of the wrapper function provided by the arm common
trusted board boot function to get the ROTPK hash.
Change-Id: I509e2f7e88cc2167e1732a971d71dc131d3d4b01
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
TBBR authentication framework depends on the plat_get_rotpk_info()
function to return the pointer to the Root of Trust Public Key (ROTPK)
stored in the platform along with its length. Add this function for
RD-Daniel platform to support Trusted Board Boot. The function makes use
of the wrapper function provided by the arm common trusted board boot
function to get the ROTPK hash.
Change-Id: I6c2826a7898664afea19fd62432684cfddd9319a
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
This patch moves all GICv2 driver files into new added
'gicv2.mk' makefile for the benefit of the generic driver
which can evolve in the future without affecting platforms.
NOTE: Usage of 'drivers/arm/gic/common/gic_common.c' file
is now deprecated and platforms with GICv2 driver need to
be modified to include 'drivers/arm/gic/v2/gicv2.mk' in
their makefiles.
Change-Id: Ib10e71bdda0e5c7e80a049ddce2de1dd839602d1
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
BL2 size gets increased due to the libfdt library update and
that eventually cause no-optimization build failure for BL2 as below:
aarch64-none-elf-ld.bfd: BL2 image has exceeded its limit.
aarch64-none-elf-ld.bfd: region `RAM' overflowed by 4096 bytes
Makefile:1070: recipe for target 'build/fvp/debug/bl2/bl2.elf' failed
make: *** [build/fvp/debug/bl2/bl2.elf] Error 1
Fixed build failure by increasing BL2 image size limit by 4Kb.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I92a57eb4db601561a98e254b64994bb921a88db3
Chandni Cherukuri
André Przywara
Manish Pandey
Javier Almansa Sobrino
Usama Arif
Olivier Deprez
Manish V Badarkhe
Anders Dellien
Ruari Phipps
Sayanta Pattanayak
Mark Dykes
Madhukar Pappireddy
Jimmy Brisson
Alexei Fedorov
Vijayenthiran Subramaniam