This change is needed for the platform to compile following the changes
made in commits cbdc72b559 and 3e02c7436c.
Change-Id: I3468dd27f3b4f3095fb82f445d51cd8714311eb7
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
"result of '1 << 31' requires 33 bits to represent, but 'int' only has
32 bits [-Werror=shift-overflow=]"
This is treated as an error since commit 93c690eba8 ("Enable
-Wshift-overflow=2 to check for undefined shift behavior")
Only the actual errors are being tackled by this patch. It is up to the
platform to choose whether there needs to be further modifications to
the code.
Change-Id: I70860ae5f2a34d7c684bd491b76da50aa04f778e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Fixed the path to a source file specified in tsp makefile
Created a platform specific tsp makefile
Change-Id: I89565127c67eff510e48e21fd450af4c3088c2d4
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Code using Cryptocell specific APIs was used as part of the
arm common board ROT support, instead of being abstracted
in Cryptocell specific driver code, creating two problems:
- Any none arm board that uses Cryptocell wuld need to
copy and paste the same code.
- Inability to cleanly support multiple versions of Cryptocell
API and products.
Move over Cryptocell specific API calls into the Cryptocell
driver, creating abstraction API where needed.
Signed-off-by: Gilad Ben-Yossef <gilad.benyossef@arm.com>
Change-Id: I9e03ddce90fcc47cfdc747098bece86dbd11c58e
* changes:
plat/mediatek/mt81*: Use new bl31_params_parse() helper
plat/rockchip: Use new bl31_params_parse_helper()
Add helper to parse BL31 parameters (both versions)
Factor out cross-BL API into export headers suitable for 3rd party code
Use explicit-width data types in AAPCS parameter structs
plat/rockchip: Switch to use new common BL aux parameter library
Introduce lightweight BL platform parameter library
The Mediatek MT8173/MT8183 SoCs are prime candidates for switching to
the new bl31_params_parse() helper, so switch them over. This will allow
BL2 implementations on these platforms to transparently switch over to
the version 2 parameter structure.
Change-Id: I0d17ba6c455102d325a06503d2078a76d12b5deb
Signed-off-by: Julius Werner <jwerner@chromium.org>
The Rockchip platform is a prime candidate for switching to the new
bl31_params_parse_helper(), so switch it over. This will allow BL2
implementations on this platform to transparently switch over to the
version 2 parameter structure.
Change-Id: I540741d2425c93f66c8697ce749a351eb2b3a7e8
Signed-off-by: Julius Werner <jwerner@chromium.org>
"result of '1 << 31' requires 33 bits to represent, but 'int' only has
32 bits [-Werror=shift-overflow=]"
This is treated as an error since commit 93c690eba8 ("Enable
-Wshift-overflow=2 to check for undefined shift behavior")
Change-Id: I141827a6711ab7759bfd6357e4ed9c1176da7c7b
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
This patch adds a new include/export/ directory meant for inclusion in
third-party code. This is useful for cases where third-party code needs
to interact with TF-A interfaces and data structures (such as a custom
BL2-implementation like coreboot handing off to BL31). Directly
including headers from the TF-A repository avoids having to duplicate
all these definitions (and risk them going stale), but with the current
header structure this is not possible because handoff API definitions
are too deeply intertwined with other TF code/headers and chain-include
other headers that will not be available in the other environment.
The new approach aims to solve this by separating only the parts that
are really needed into these special headers that are self-contained and
will not chain-include other (non-export) headers. TF-A code should
never include them directly but should instead always include the
respective wrapper header, which will include the required prerequisites
(like <stdint.h>) before including the export header. Third-party code
can include the export headers via its own wrappers that make sure the
necessary definitions are available in whatever way that environment can
provide them.
Change-Id: Ifd769320ba51371439a8e5dd5b79c2516c3b43ab
Signed-off-by: Julius Werner <jwerner@chromium.org>
It's not a good idea to use u_register_t for the members of
aapcs64_params_t and aapcs32_params_t, since the width of that type
always depends on the current execution environment. This would cause
problems if e.g. we used this structure to set up the entry point of an
AArch32 program from within an AArch64 program. (It doesn't seem like
any code is doing that today, but it's probably still a good idea to
write this defensively. Also, it helps with my next patch.)
Change-Id: I12c04a85611f2b6702589f3362bea3e6a7c9f776
Signed-off-by: Julius Werner <jwerner@chromium.org>
This patch changes all Rockchip platforms to use the new common BL aux
parameter helpers. Since the parameter space is now cleanly split in
generic and vendor-specific parameters and the COREBOOT_TABLE
parameter is now generic, the parameter type number for that parameter
has to change. Since it only affects coreboot which always builds TF as
a submodule and includes its headers directly to get these constants,
this should not cause any issues. In general, after this point, we
should avoid changing already assigned parameter type numbers whenever
possible.
Change-Id: Ic99ddd1e91ff5e5fe212fa30c793a0b8394c9dad
Signed-off-by: Julius Werner <jwerner@chromium.org>
Add the basic support for RDC init/config driver,
this module driver can be enhanced more if necessary.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I290dc378d0d85671435f9de46d5aa790b4e006c8
The DMC-620 memory controllers in N1SDP platform has to be put
into CONFIG state before writing to ERR0CTLR0 register to enable
ECC.
This patch fixes the sequence so that DMCs are set to CONFIG
state before writing to ERR0CTLR0 register and moved back to
READY state after writing.
Change-Id: I1252f3ae0991603bb29234029cddb5fbf869c1b2
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
The watchdog is configured with a default value of 256 seconds in order
to implement the Trusted Board Boot Requirements.
For the FVP and Juno platforms, the FWU process relies on a watchdog
reset. In order to automate the test of FWU, the length of this process
needs to be as short as possible. Instead of waiting for those 4 minutes
to have a reset by the watchdog, tell it to reset immediately.
There are no side effects as the value of the watchdog's load register
resets to 0xFFFFFFFF.
Tested on Juno.
Change-Id: Ib1aea80ceddc18ff1e0813a5b98dd141ba8a3ff2
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
The PicoPi iMX7D is a 2 board development board consisting of
a System-on-Module and a carrier baseboard and optimized for
the Internet-of-Things (IoT).
This patch add basic support to this board.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Louis Mayencourt <louis.mayencourt@arm.com>
Change-Id: I009d85819c4f73b7063aab73d0f6ee74e6ef3fc4
For the iMX7 SOCs, part of the code for platform
setup implementation can be reused and made
common for all these SoCs. This patch extracts
the common part for reuse.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Change-Id: I42fd4167e6903416df96a0159a046abf3896e878
When the link goes down (e.g. during a retrain), accessing the device
configuration space can trigger an ARM64 SError interrupt. Such
conditions cannot be predicted, so to avoid a crash the SError is
ignored.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Change-Id: I2b1fd3296cc1c88b9ca1fe21c0924cb324eed58d
This patch adds support for Cortex-A5 FVP for the
DesignStart program. DesignStart aims at providing
low cost and fast access to Arm IP.
Currently with this patch only the primary CPU is booted
and the rest of them wait for an interrupt.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: I3a2281ce6de2402dda4610a89939ed53aa045fab
* changes:
Enable -Wshift-overflow=2 to check for undefined shift behavior
Update base code to not rely on undefined overflow behaviour
Update hisilicon drivers to not rely on undefined overflow behaviour
Update synopsys drivers to not rely on undefined overflow behaviour
Update imx platform to not rely on undefined overflow behaviour
Update mediatek platform to not rely on undefined overflow behaviour
Update layerscape platform to not rely on undefined overflow behaviour
Update intel platform to not rely on undefined overflow behaviour
Update rockchip platform to not rely on undefined overflow behaviour
Update renesas platform to not rely on undefined overflow behaviour
Update meson platform to not rely on undefined overflow behaviour
Update marvell platform to not rely on undefined overflow behaviour
Update the revision number in the revision management file.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I94acd1bb53d9d2453e550e2a13b6391b9088ff8d
This consists of ensuring that the left operand of each shift is
unsigned when the operation might overflow into the sign bit.
Change-Id: I67984b6c48c08af61e95a4dbd18047e2c3151f9a
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
This consists of ensuring that the left operand of each shift is
unsigned when the operation might overflow into the sign bit.
Change-Id: Ia0a10b4a30e63c0cbf1d0f8dfe5768e0a93ae1c7
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
This consists of ensuring that the left operand of each shift is
unsigned when the operation might overflow into the sign bit.
Change-Id: If5a88e1b880bcb2be2278398cf5109a6d877e632
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
This consists of ensuring that the left operand of each shift is
unsigned when the operation might overflow into the sign bit.
Change-Id: Ib63ef6e2e4616dd56828bfd3800d5fe2df109934
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
This consists of ensuring that the left operand of each shift is
unsigned when the operation might overflow into the sign bit.
Change-Id: I4c7a315cb18b3bbe623e7a7a998d2dac869638a7
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
This consists of ensuring that the left operand of each shift is
unsigned when the operation might overflow into the sign bit.
Change-Id: Ib7fc54e4141cc4f1952a18241bc18671b36e2168
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
This consists of ensuring that the left operand of each shift is
unsigned when the operation might overflow into the sign bit.
Change-Id: I51278beacbe6da79853c3f0f0f94cd806fc9652c
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
This consists of ensuring that the left operand of each shift is
unsigned when the operation might overflow into the sign bit.
Change-Id: I78f386f5ac171d6e52383a3e42003e6fb3e96b57
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
MMC sample select needs to be set properly so that DWMMC clock can be
driven to 50Mhz
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
Change-Id: I4a1dde4f6a1e78a36940c57a7a5b162be0bd443a
px30 is a Quad-core soc and Cortex-a53 inside.
This patch supports the following functions:
1. basic platform setup
2. power up/off cpus
3. suspend/resume cpus
4. suspend/resume system
5. reset system
6. power off system
Change-Id: I73d55aa978096c078242be921abe0ddca9e8f67e
Signed-off-by: XiaoDong Huang <derrick.huang@rock-chips.com>
Alexei Fedorov
Ambroise Vincent
Soby Mathew
Madhukar Pappireddy
Gilad Ben-Yossef
Julius Werner
Jacky Bai
Manoj Kumar
Hadi Asyrafi
Jun Nie
Louis Mayencourt
Remi Pommarel
Usama Arif
Toshiyuki Ogasahara
Justin Chadwell
John Tsichritzis
Balint Dobszay
Tien Hock, Loh
Sandrine Bailleux
XiaoDong Huang