Add new APIs to enter and exit "boot mode".
In this mode a potential tamper won't block access or reset
the secure IPs needed while boot, without this mode a dead
lock may occurs.
Change-Id: Iad60d4a0420ec125b842a285f73a20eb54cd1828
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
On STM32MP13, the high speed mode for pads in low voltage is different
from STM32MP15. Each peripheral supporting the feature has its own
register.
Special care is taken for SDMMC peripherals. The HSLV mode is enabled
only if the max voltage for the pads is lower or equal to 1.8V.
Change-Id: Id94d2cca17dd4aca4d764230a643b2bb9a5f3342
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add DT_SDMMC2_COMPAT define in stm32mp1_def.h file in platform.
It allows the use of the compatible in platform code.
Change-Id: I535ad67dd133bab59cf81881adaef42d8e88632c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
On STM32MP13, two new SD1 and SD2 IO compensations cells are added,
for SDMMC1 and SDMMC2. They have to be managed the same way as the
main compensation cell.
Change-Id: Ib7aa648d65fc98e1613bfb46b0e7dd568fd21002
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The nominal voltage for VDDCPU when Cortex-A7 runs at 650MHz is 1.25V
on STM32MP13. VDDCORE should be set at 1.25V as well.
This is necessary, as the PMIC values in its NVMEM are 1.2V.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I3c24fe4cd68c7bf143cf9318ab38a15d6d41b5d2
This field is now declared on the 10 LSB bits on STM32MP13.
Several possible values are specified in the Reference Manual, and
indicate an open or closed device. Other values lead to a system panic.
Change-Id: I697124a21db66a56e7e223d601aa7cf44bb183c4
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Update USB and DFU descriptor used for STM32MP13x
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: I6e8111d279f49400a72baa12ff39f140d97e1c70
Add new clock driver for STM32MP13. Split the include file to manage
either STM32MP13 or STM32MP15.
Change-Id: Ia568cd12b1d5538809204f0fd2224d51e5d1e985
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
The IDC register from DBGMCU is duplicated in SYSCFG. As SYSCFG is
always accessible, get chip ID and revision ID from there on STM32MP13.
Change-Id: Ib0b6e8f68a2934a45ec0012f69db6c12a60adb17
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The ERXCTLR_EL1 register reads are RES0 for some error records
leading to a false assert on a read back.
This patch removes the assert on reading back the ERXCTLR_EL1
register to fix this issue.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I0cab30b12656a800ba87b8bb94b4c67a2331dee6
On STM32MP13, there is only 1 DDR port, hence only 1 TZC400 filter.
Change-Id: I4f6750022cdaf658cd209a4bf48a6cdb0717020e
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Increase the fixed regulator number that needs to be
2 for STM32MP13.
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Change-Id: Ica990fe9a6494b76aed763d2d353f5234fed7cea
The header must now include by default at least an extra padding
header, increasing the size of the header to 512 bytes (0x200).
This header will be placed at the end of SRAM3 by BootROM, letting
the whole SYSRAM to TF-A.
The boot context is now placed in SRAM2, hence this memory has to be
mapped in BL2 MMU. This mapping is done for all SRAMs in a 2MB area.
Change-Id: I50fcd43ecd0ba2076292b057566efe6809b9971a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the new field for the new header v2.0.
Force MP13 platform to use v2.0.
Removing unused fields in boot_api_context_t for STM32MP13.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: Iac81aad9a939c1f305184e335e0a907ac69071df
Add the IP addresses that are STM32MP13 and update the ones for
which the base address has changed.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Iea71a491da36f721bfd3fbfb010177e2a6a57281
Add the new part numbers and adapt the functions that use them.
There is no package number in OTP as they all share the same GPIO
banks.
This part is then stubbed for STM32MP13.
Change-Id: I13414326b140119aece662bf8d82b387dece0dcc
Signed-off-by: Yann Gautier <yann.gautier@st.com>
On STM32MP13, the chip revision Z is 0x1001, contrary to STM32MP15,
for which it was 0x2001.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: If65482e824b169282abb5e26ca91e16ef7640b52
The backup register used on STM32MP15 to save the boot interface for
the next boot stage was 20. It is now saved in backup register 30
on STM32MP13.
Change-Id: Ibd051ff2eca7202184fa428ed57ecd4ae7388bd8
Signed-off-by: Yann Gautier <yann.gautier@st.com>
STM32MP13 is a single Cortex-A7 CPU, always return true in
stm32mp_is_single_core() function.
Change-Id: Icf36eaa887bdf314137eda07c5751cea8c950143
Signed-off-by: Yann Gautier <yann.gautier@st.com>
* GPIO: On STM32MP13, there are no banks GPIOJ, GPIOK and GPIOZ.
* STM32MP13 is a single Cortex-A7 CPU: remove reset from MPU1
and reset from MCU traces
* There is no MCU on STM32MP13. Put MCU security management
under STM32MP15 flag.
* The authentication feature is not supported yet on STM32MP13,
put the code under SPM32MP15 flag.
* On STM32MP13, the monotonic counter is managed in ROM code, keep
the monotonic counter update just for STM32MP15.
* SYSCFG: put registers not present on STM32MP13 under STM32MP15
flag, as the code that manages them.
* PMIC: use ldo3 during DDR configuration only for STM32MP15
* Reset UART pins on USB boot is no more required.
Change-Id: Iceba59484a9bb02828fe7e99f3ecafe69c837bc7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
SYSRAM is only 128KB and starts at 0x2FFE0000.
SRAMs are added.
BL2 code and DTB sizes are also reduced to fit in 128KB.
Change-Id: I25da99ef5c08f8008ff00d38248d61b6045adad4
Signed-off-by: Yann Gautier <yann.gautier@st.com>
STM32MP13 is a variant of STM32MP1, with a single Cortex-A7, and no
Cortex-M4.
There is only one DDR port.
SP_min is not supported, only OP-TEE can be used as monitor.
STM32MP13 uses the header v2.0 format for stm32image generation
for BL2.
Change-Id: Ie5b0e3230c5e064fe96f3561fc5b3208914dea53
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The stm32image tool is updated to manage new header v2.0 for BL2
images.
Add new structure for the header v2.0 management.
Adapt to keep compatibility with v1.0.
Add the header version major and minor in the command line
when executing the tool, as well as binary type (0x10 for BL2).
Change-Id: I70c187e8e7e95b57ab7cfad63df314307a78f1d6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
This patch applies CVE-2022-23960 workarounds for Cortex-A75,
Cortex-A73, Cortex-A72 & Cortex-A57. This patch also implements
the new SMCCC_ARCH_WORKAROUND_3 and enables necessary discovery
hooks for Coxtex-A72, Cortex-A57, Cortex-A73 and Cortex-A75 to
enable discovery of this SMC via SMC_FEATURES. SMCCC_ARCH_WORKAROUND_3
is implemented for A57/A72 because some revisions are affected by both
CVE-2022-23960 and CVE-2017-5715 and this allows callers to replace
SMCCC_ARCH_WORKAROUND_1 calls with SMCCC_ARCH_WORKAROUND_3. For details
of SMCCC_ARCH_WORKAROUND_3, please refer SMCCCv1.4 specification.
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ifa6d9c7baa6764924638efe3c70468f98d60ed7c
Update WA for Errata A-050426 as Commands for
PEX (PEX1..PEX6) , lnx1_e1000#0, lnx1_xfi and
lnx2_xfi has been moved to PBI phase.
This patch requires RCW to include PBI commands
to write commands in BIST mode for PEX, lnx1_e1000,
lnx1_xfi and lnx2_xfi IP blocks.
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Change-Id: I27c2b055c82c0b58df83449f9082bfbfdeb65115
In anticipation of Spectre BHB workaround mitigation patches, we
disable the RECLAIM_INIT_CODE for FVP platform. Since the spectre
BHB mitigation workarounds inevitably increase the size of the various
segments due to additional instructions and/or macros, these segments
cannot be fit in the existing memory layout designated for BL31 image.
The issue is specifically seen in complex build configs for FVP
platform. One such config has TBB with Dual CoT and test secure
payload dispatcher(TSPD) enabled. Even a small increase in individual
segment size in order of few bytes might lead to build fails due to
alignment requirements(PAGE_ALIGN to 4KB).
This is needed to workaround the following build failures observed
across multiple build configs:
aarch64-none-elf-ld.bfd: BL31 init has exceeded progbits limit.
aarch64-none-elf-ld.bfd: /work/workspace/workspace/tf-worker_ws_2/trusted_firmware/build/fvp/debug/bl31/bl31.elf section coherent_ram will not fit in region RAM
aarch64-none-elf-ld.bfd: BL31 image has exceeded its limit.
aarch64-none-elf-ld.bfd: region RAM overflowed by 4096 bytes
Change-Id: Idfab539e9a40f4346ee11eea1e618c97e93e19a1
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
This allows TF-A's a3700_system_reset() function to try Warm reset
method when CM3 reset method is not implemented by WTMI firmware.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I7303197373e1a8ca5a44ba0b1e90b48855d6c0c3
* changes:
Revert "feat(sgi): deviate from arm css common uart related defi..."
Revert "feat(sgi): route TF-A logs via secure uart"
Revert "feat(sgi): add page table translation entry for secure uart"
Revert submission 14286-uart_segregation
Reason for revert: Need to wait for companion patches in CI and UEFI/Linux to be upstreamed.
Reverted Changes:
I8574b31d5:feat(sgi): add page table translation entry for se...
I8896ae05e:feat(sgi): route TF-A logs via secure uart
I39170848e:feat(sgi): deviate from arm css common uart relate...
Change-Id: I28a370dd8b3a37087da621460eccc1acd7a30287
Revert submission 14286-uart_segregation
Reason for revert: Need to wait for companion patches in CI and UEFI/Linux to be upstreamed.
Reverted Changes:
I8574b31d5:feat(sgi): add page table translation entry for se...
I8896ae05e:feat(sgi): route TF-A logs via secure uart
I39170848e:feat(sgi): deviate from arm css common uart relate...
Change-Id: I7c488aed9fcb70c55686d705431b3fe017b8927d
Revert submission 14286-uart_segregation
Reason for revert: Need to wait for companion patches in CI and UEFI/Linux to be upstreamed.
Reverted Changes:
I8574b31d5:feat(sgi): add page table translation entry for se...
I8896ae05e:feat(sgi): route TF-A logs via secure uart
I39170848e:feat(sgi): deviate from arm css common uart relate...
Change-Id: I9bec02496f826e184c6efa643f869b2eb3b52539
DFD (Design for Debug) is a debugging tool, which scans flip-flops and
dumps to internal RAM on the WDT reset. After system reboots, those
values could be showed for debugging.
BUG=b:222217317
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I659ea1e0789cf135a71a13b752edaa35123e0941
When trying to boot from an SD card with STM32MP_EMMC_BOOT enabled,
booting fails with:
ERROR: Got unexpected value for active boot partition, 0
ASSERT: plat/st/common/bl2_stm32_io_storage.c:285
because SD cards don't provide a boot partition. So only try reading
from such a partition when booting from eMMC.
Fixes: 214c8a8d08 ("feat(plat/st): add STM32MP_EMMC_BOOT option")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Change-Id: I354b737a3ae3ea577e83dfeb7096df22275d852d
* changes:
feat(sgi): add page table translation entry for secure uart
feat(sgi): route TF-A logs via secure uart
feat(sgi): deviate from arm css common uart related definitions
Updated makefile so that build can accept absolute mbedTLS path.
Change-Id: Ife73266a01d7ed938aafc5e370240023237ebf61
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Updating call order for arm_console_boot_init() and arm_bl31_early_platform_setup().
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: If932fff2ee4282a0aacf8751fa81e7665b886467
Patch [1] introduces a mechanism to provide the platform
specified mbedTLS config file, but that result in build failure
for Broadcom platform.
This build failure is due to the absence of the mbedTLS configuration
file i.e. brcm_mbedtls_config.h in the TF-A source code repository.
"fatal error: brcm_mbedtls_config.h: No such file or directory"
This problem was resolved by removing the 'brcm_mbedtls_config.h' entry
from the broadcom platform makefile, allowing this platform to use
the default mbedtls_config.h file.
[1]: https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/13726
Signed-off-by: Manish V Badarkhe <manish.badarkhe@arm.com>
Change-Id: I7cc2efc049aefd3ebce1ae513df9b265fe31ded6
Add page table translation entry for secure uart so that logs from
secure partition can be routed via the same.
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I8574b31d5d138d9f94972deb903124f8c5b70ce4
Route the boot, runtime and crash stage logs via secure UART port
instead of the existing use of non-secure UART. This aligns with the
security state the PE is in when logs are put out. In addition to this,
this allows consolidation of the UART related macros across all the
variants of the Neoverse reference design platforms.
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I8896ae05eaedf06dead520659375af0329f31015
The Neoverse reference design platforms will migrate to use different
set of secure and non-secure UART ports. This implies that the board
specific macros defined in the common Arm platform code will no longer
be usable for Neoverse reference design platforms.
In preparation for migrating to a different set of UART ports, add a
Neoverse reference design platform specific copy of the board
definitions. The value of these definitions will be changed in
subsequent patches.
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Change-Id: I39170848ecd81a7c1bbd3689bd905e45f9435f5c
* changes:
build(intel): enable access to on-chip ram in BL31 for N5X
fix(intel): make FPGA memory configurations platform specific
fix(intel): fix ECC Double Bit Error handling
build(intel): define a macro for SIMICS build
build(intel): add N5X as a new Intel platform
build(intel): initial commit for crypto driver
Remove reserved range for platform provider owned SPs if the dual root
CoT is disabled and allow SPs to populate the range up to MAX_SP_IDS.
Signed-off-by: Imre Kis <imre.kis@arm.com>
Change-Id: Ib4ec18f6530d2515ada21d2c0c388d55aa479d26
Following I2d274fa897171807e39b0ce9c8a28824ff424534:
Remove GICD registers S2 mapping from OP-TEE partition when it runs in a
secure partition on top of Hafnium.
The partition is not meant to access the GIC directly but use the
Hafnium provided interfaces.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I1a38101f6ae9911662828734a3c9572642123f32
Fix coding style violations and alignments:
- Remove additional newlines in headers
- Remove additional newlines in code
- Add newline to separate variable from the code
- Use the same indentation in platform.mk
- Align function parameters
- Use tabs for indentation in kernel-doc format
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I0b12804ff63bc19778e8f21041f9accba5b488b9
This adds the ncore ccu access and enable access to the
on-chip ram for N5X device in BL31.
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I713f6e93d33b6e91705547477ca32cfba5c8c13d
Define FPGA_CONFIG_SIZE and FPGA_CONFIG_ADDR in
platform-specific header. This is due to different
allocated sizes between platforms.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Iac4fbf4d4940cdf31834a9d4332f9292870dee76
SError and Abort are handled in Linux (EL1) instead of
EL3. This patch adds some functionality that complements the
use cases by Linux as follows:
- Provide SMC for ECC DBE notification to EL3
- Determine type of reset needed and service the request in
place of Linux
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I43d02c77f28004a31770be53599a5a42de412211
SIMICS builds have different UART configurations compared
to hardware build. Hence, this patch defines a macro to
differentiate between both.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Iadecd5445e06611486ac3c6a214a6d0dc8ccd27b
This commit adds a new Intel platform called N5X.
This preliminary patch only have Bl31 support.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Ib31f9c4a5a0dabdce81c1d5b0d4776188add7195
This patch adds driver for Intel FPGA's Crypto Services.
These services are provided by Intel platform
Secure Device Manager(SDM) and are made accessible by
processor components (ie ATF).
Below is the list of enabled features:
- Send SDM certificates
- Efuse provision data dump
- Encryption/decryption service
- Hardware IP random number generator
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: If7604cd1cacf27a38a9a29ec6b85b07385e1ea26
* changes:
fix(zynqmp): query node status to power up APU
feat(zynqmp): pm_api_clock_get_num_clocks cleanup
feat(zynqmp): add feature check support
fix(zynqmp): use common interface for eemi apis
feat(zynqmp): add support to get info of xilfpga
feat(zynqmp): pass ioctl calls to firmware
When the atf-handoff-params are updated we are returning
FSBL_HANDOFF_SUCCESS, but the return condition is wrongly
updated and added a error log which is incorrect.
Fixing the incorrect log message.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I44ebbb861831b86afcb87f09ddb2e23614393c28
Add the possibility to configure console UART baudrate, it can be passed
as a command line parameter with STM32MP_UART_BAUDRATE. The default value
remains 115200.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I000df70c10b2b4dac1449556596f9820c36cf243
If APU is in suspending state and if wakeup request comes then
PMUFW returns error which is not handled at ATF side.
To fix this, get the APU node status before calling wakeup and
return error if found in suspending state.
Here, we can not handle the error code of pm_req_wakeup() from PMUFW
because ATF is already calling pm_client_wakeup() before calling
pm_req_wakeup().
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: I18d47384e46e22ae49e804093ad0641b7a6349e2
There is no reason to have even one additional useless line that's why
remove it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: Icc3c74249dfe64173aa5c88fb0f9ffe7576fc2aa
This API returns version of supported APIs.
Here, there are three cases to check API version by using feature
check implementation.
1. Completely implemented in TF-A: I mean the EEMI APIs which are
completely implemented in the TF-A only. So check those IDs and
return appropriate version for the same. Right now, it is base
version.
2. Completely implemented in firmware: I mean the EEMI APIs which are
completely implemented in the firmware only. Here, TF-A only passes
Linux request to the firmware to get the version of supported API. So
check those IDs and send request to firmware to get the version and
return to Linux if the version is supported or return the error code
if the feature is not supported.
3. Partially implemented (Implemented in TF-A and firmware both):
First check dependent EEMI API version with the expected version in
the TF-A. If the dependent EEMI API is supported in firmware then
return its version and check with the expected version in the TF-A.
If the version matches then check for the actual requested EEMI API
version. If the version is supported then return version of API
implemented in TF-A.
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: I73f20d8222c518df1cda7879548b408b130b5b2e
Currently all EEMI API has its own implementation in TF-A which is
redundant. Most EEMI API implementation in TF-A does same work. It
prepares payload received from kernel, sends payload to firmware,
receives response from firmware and send response back to kernel.
So use common interface for EEMI APIs which has similar functionality.
This will optimize TF-A code.
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: I07325644a1fae80211f2588d5807c21973f6d48f
Adds support to get the xilfpga library version and feature list info.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: Iff10ad2628a6a90230c18dc3aebf9dde89f53ecd
Firmware supports new IOCTL for different purposes. To avoid
maintaining new IOCTL IDs in ATF, pass IOCTL call to firmware
for IOCTL IDs implemented in firmware.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: Ie14697c8da9581b0f695f4d33f05161ece558385
Update the MAX_XLAT_TABLES as the memory map has been
added for the dtb to accomodate in DDR address.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I46225673f40f123cdab38efefb038604da119b58
Remove the time stamp and system counter configuration, as
this configuration is already done by the first stage bootloader.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I41554dc2e14d97954bff299df9740a5efa30fad9
With gcc-11, the -Wformat-signedness warning complains about enum values
that should be printed as unsigned values. But the current version of
compiler used in CI states that this parameter is signed. Just cast the
value then.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ic0655e5ba9c44fe6abcd9958d7a9972f5de3b7ef
* changes:
fix(intel): null pointer handling for resp_len
fix(intel): define macros to handle buffer entries
fix(intel): change SMC return arguments for INTEL_SIP_SMC_MBOX_SEND_CMD
fix(intel): always set doorbell to SDM after sending command
fix(intel): fix bit masking issue in intel_secure_reg_update
fix(intel): fix ddr address range checker
build(changelog): add new scope for Intel platform
Change resource_req to 0 to disable 26MHz clock.
SPM firmware will pull-down SRCLKENA0 after 26MHz off while suspending.
TEST=verify 26MHz clock off using the oscilloscope.
BUG=b:215639203
Signed-off-by: Jason-ch Chen <jason-ch.chen@mediatek.com>
Change-Id: I05702d14a015cabccd6d4af0e3f2a534fbe4dd12
* changes:
fix(nxp-crypto): refine code to avoid hang issue for some of toolchain
build(changelog): add new scope for nxp crypto
fix(lx2): drop erratum A-009810
Platforms which support Realm world cannot boot up
properly if measured boot is enabled at build time.
An assertions occurs due to the missing RMM entry
in the event_log_metadata array.
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Change-Id: I172f10a440797f7c9e1bc79dc72242b40c2521ea
Previous changes from commit #6a659448 updates resp_len from an integer
type to unsigned integer pointer type. This patch adds proper handling
in case resp_len is a null pointer. Resp_len with value 0 are also
changed to NULL to match the type change.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I75b3e3bfbb188d8e7b329ba3b948c23e31dec490
This patch defines a macro to handle Secure Device Manager's (SDM)
pointer to command & response buffer entries and convert them to the
correct physical address.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I4cf9f1d90e0d5ae4e1a2ce84165864b48c2862e7
'INTEL_SIP_SMC_MBOX_SEND_CMD' SMC runtime service will only return
mailbox status and the argument's length back to the caller
Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Change-Id: I50d2ae74845794cab7bf0858e742b5a70e0ea868
This patch fixes the mailbox stall issue when sending mailbox command
that is larger than mailbox command FIFO size.
Large mailbox command will be sent to SDM in multiple chunks. HPS will
set doorbell to SDM when command FIFO full (is_doorbell_triggered will
be set to 1) to notify SDM to read the command data from FIFO, so that
HPS can continue to send the next chunk of command data.
However, HPS will not set the doorbell to SDM at the end if the doorbell
have been set earlier due to FIFO full. This will cause SDM mailbox
service stall because it is still waiting for last chunk of command data.
This patch fixes the code to always set the doorbell to SDM at the end
to get rid of stall issue.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Change-Id: Idbe62410a00d92a30c7aeaa26d53d79a910cac0a
intel_secure_reg_update function should apply mask to the value before
write into register.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Change-Id: I84bbd06e24b8666528b53030e8359743d438eb5b
This patch fix address range checker to make sure that it does not
errors out on NULL address with size 0. Non-secure software will send
this NULL address if the SMC call doesn't need to pass any address buffer.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I7e492c562a311ba989570c4ed465f845333ec865
This patch fixes the code issue detected by Klocwork scan. Pointer
'bl_mem_params' returned from call to function 'get_bl_mem_params_node'
may be NULL and the NULL pointer may be caused the system crash. Update
the code to assert if unexpected NULL pointer is returned.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Change-Id: I00f3132a6104618cadce26aa303c0b46b5921d5b
Request ownership and direct access to QSPI by default in BL2.
Previously, this is only done on QSPI boot mode.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ie222bbf9d719f2f70f89d4739c285efe6df4c955
The erratum A-009810 should not be applied to LX2, the impaction is
that it can cause system reboot when linux tried to power down, so remove
it.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I5e24229cf8512eff28b315ebcdf18de555c40c74
* changes:
docs(layerscape): add ls1046a soc and board support
feat(ls1046aqds): add board ls1046aqds support
feat(ls1046afrwy): add ls1046afrwy board support
feat(ls1046ardb): add ls1046ardb board support
feat(ls1046a): add new SoC platform ls1046a
fix(nxp-tools): fix tool location path for byte_swape
fix(nxp-qspi): fix include path for QSPI driver
build(changelog): add new scopes for NXP layerscape platforms
* changes:
feat(stm32mp1): enable format-signedness warning
fix(stm32mp1): correct types in messages
fix(st-pmic): correct verbose message
fix(st-sdmmc2): correct cmd_idx type in messages
fix(st-fmc): fix type in message
fix(mtd): correct types in messages
fix(usb): correct type in message
fix(tzc400): correct message with filter
fix(psci): correct parent_node type in messages
fix(libc): correct some messages
fix(fconf): correct image_id type in messages
fix(bl2): correct messages with image_id
Currently only the lowest 2 DRAM region were configured in the
TrustZone Controller, but the platform supports 6 regions spanning the
whole address space.
Configuring all of them to allow tests to access memory also in those
higher memory regions.
FVP memory map:
https://developer.arm.com/documentation/100964/1116/Base-Platform/Base---memory/Base-Platform-memory-map
Note that last row is wrong, describing a non-existing 56bit address,
all region labels should be shifted upward.
Issue has been reported and next release will be correct.
Change-Id: I695fe8e24aff67d75e74635ba32a133342289eb4
Signed-off-by: Federico Recanati <federico.recanati@arm.com>
Nicolas Toromanoff
Yann Gautier
Nicolas Le Bayon
Patrick Delaunay
Gabriel Fernandez
Varun Wadekar
Madhukar Pappireddy
Lionel Debieve
Lionel Debieve
Sebastien Pasdeloup
Bipin Ravi
Wasim Khan
Manish Pandey
Pali Rohár
Rex-BC Chen
Uwe Kleine-König
Joanna Farley
Olivier Deprez
Manish V Badarkhe
Juan Pablo Conde
Rohit Mathew
Imre Kis
Michal Simek
Boon Khai Ng
Sieu Mun Tang
Abdul Halim, Muhammad Hadi Asyrafi
Venkatesh Yadav Abbarapu
Yann Gautier
Ravi Patel
Ronak Jain
Nava kishore Manne
Rajan Vaja
Sandrine Bailleux
jason-ch chen
Tamas Ban
Siew Chin Lim
Jiafei Pan
Federico Recanati