The LS1028A reference design board (RDB) is a computing,
evaluation, and development platform that supports industrial
IoT applications, human machine interface solutions, and
industrial networking.
It supports the following features:
1. Layerscape LS1028A dual-core processor based on Cortex-A72
at 1.3 GHz.
2. 4 GB DDR4 SDRAM w/ECC
3. Support Ethernet:
1) x1 RJ45 connector for 1Gbps Ethernet support w/TSN, 1588
2) x4 RJ45 connector for 1Gbps Ethernet switch support w/TSN,
1588 (QSGMII)
3. With Basic Peripherals and Interconnect
2x M.2 Type E slots with PCIe Gen 3.0 x1
1x M.2 Type B slot with SATA 3.0 (resistor mux with 1 Type E slot)
1x Type A USB 3.0 super-speed port
1x Type C USB 3.0 super-speed port
1x DisplayPort interface
2x DB9 RS232 serial ports
2x DB9 CAN interfaces
1x 3.5 mm audio out
2x MikroBUS™ sockets
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Change-Id: I48ee254a488ae4af227641da3875a1e9a63a720c
The QorIQ LS1028A processor integrates two 64-bit ARM Cortex-A72
cores with a GPU and LCD controller, as well as a TSNenabled
Ethernet port and a TSN-enabled switch with four external ports.
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Change-Id: I9f65c6af5db7e20702828cd208290c1b43a54941
Define default SD buffer address and size in DRAM.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I5872d95b0c1114e05f0e145756e9a6ef39b2fd9a
SoC code can define supported features, otherwise use default setting.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I0f11498c1f7558ff0ec2d9b344f3f7a4f5489ced
Define common register macro both for Cortex-A53 and Cortex-A72
because the code will be used by both Cortex platform.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I485661bfe3ed4f214c403ff6af53dc6af1ddf089
Add CCI and EPU base address definiton for Chassis v3.2.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I13250555b6646c1e7ba2e9d7c9efca8501f17b3a
1. Refined struct soc_info_t definition.
2. Refined get_soc_info function.
3. Fixed some SVR persernality value.
4. Refined API to get cluster numbers and cores per cluster.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I3c20611a523516cc63330dce4c925e6cda1e93c4
Use a unfied API soc_errata() for each platforms,
add print a INFO message for each enabled errata,
so that it will be easy to check which errata is
enabled on current platform.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I5eab3f338db6b46c57cbad475819043fc60ca6d3
Will add more Erratas, some errata can be used for multiple
platforms, so move errata to be common code which can
be share between different platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Ib149b3eac365bdb593331e9f38f0b89d92c9c0d1
This patch will make BL2_BASE to be hex valaue but
not a shell command.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Iebb86a0b9bc8cab1676bd8e898cf4a1b6d16f472
Some build variables have already defined in common
make helper file, use them directly.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I7fe6331160bfdf315924d4498d78b0a399eb2e89
Add macro of SUPPORTED_BOOT_MODE for board lx2160ardb, lx2160aqds,
lx2162aqds.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I4451ca030eca79c9bc5fee928eec497a7f0e878c
1. Added the build macro "add_boot_mode_define".
2. Use the macro to validate current BOOT_MODE against the
pre-determined list of SUPPORTED_BOOT_MODE, so each platform
need to define the list: SUPPORTED_BOOT_MODE.
3. Reports error if BOOT_MODE is not in SUPPORTED_BOOT_MODE list,
or BOOT_MODE is not supported yet althoug it is in SUPPORTED_BOOT_MODE.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I29be60ecdb19fbec1cd162e327cdfb30ba629b07
Move some soc make variables to new soc_common_def.mk,
then it can be reused by other platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Ia30bd332c95b6475f1cfee2f03a8ed3892a9568d
Use common code in common file to configure platform.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I72fe22751f12b8a4996a7b9f75fae4c912ea86de
Move some common make variables to new plat_common_def.mk,
then it can be reused by other platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I37bd65b0f8124f63074fa03339f886c2cdb30bd3
SoC erratas are handled as part of this commit.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I06f7594d19cc7fc89fe036a8a255300458cb36dd
- NXP SoC lx2160a needs additional ddr_fip.bin.
- There are three types of ddr image that can be created:
-- ddr_fip.mk for creating fip_ddr.bin image for normal boot.
-- ddr_fip_sb.mk for creating fip_ddr_sec.bin image for NXP CSF based
CoT/secure boot.
-- ddr_fip_tbbr.mk for creating fip_ddr_sec.bin image for MBEDTLS
CoT/secure boot.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I24bff8d489f72da99f64cb79b2114faa9423ce8c
* NXP SoC is 16 A-72 core SoC.
* SoC specific defines are defined in:
- soc.def
- soc.h
* Called for BL2 and BL31 setup, SoC specific setup are implemented in:
- soc.c
* platform specific helper functions implemented at:
- aarch64/lx2160a_helpers.S
* platform specific functions used by 'plat/nxp/commpon/psci',
etc. are implemented at:
- aarch64/lx2160a.S
* platform specific implementation for handling PSCI_SYSTEM_RESET2:
- aarch64/lx2160a_warm_rst.S
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ib40086f9d9079ed9b22967baff518c6df9f408b8
For NXP platforms:
- Setup files for BL2 and BL31
- Other supporting files.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I36a1183a0652701bdede9e02d41eb976accbb017
NXP: Added warm reset handler to handle SMC PSCI_SYSTEM_RESET2
raised from kernel (> 5.4).
As part of first cold boot, DDR training data is stored in NV storage.
As part of this SMC handling, following things are done:
- DDR is put in self-refresh mode to retain the content of DDR.
- Reset cause is saved.
- Reset is triggered.
On next boot to last warm-reset, DDR training is restored from
the NV storage.
Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I8e4fb0824887af49e959c93825e2ab0ba887fc9d
NV storage API(s) for NXP platforms, supported on:
- flexspi-nor
- SecMon - General Purpose Registers at Low-Power section,
retains their content if backed by coined battery.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Id65dee4f28e7d6d2024407030039de33ebe0fa05
NXP SoC supports two TBB mode:
- MBED_TLS based
-- ROTK key hash is placed as part of the BL2 binary at section:
--- .rodata.nxp_rotpk_hash
-- Supporting non-volatile counter via SFP.
-- platform function used by TFA common authentication code.
- NXP CSF based
-- ROTK key deployment vary from MBEDTLS
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ib0f0bf024fd93de906c5d4f609383ae9e02b2fbc
All of the NXP SoC, needs fip_fuse image to be
loaded additionally as part of preparation for Trusted board boot
- fip_fuse.bin contains an image for auto fuse provisioning.
- Auto fuse provisioning is based on the input file with values for:
-- SRK Hash
-- OTPMK
-- misc. refer board manual for more details.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I26d4024fefe352d967ca120191f784f1f47aa9d1
Few of the NXP SoC like LX2160A, needs ddr-phy images to be
loaded additionally before DDR initialization
- fip_ddr.bin is created containing upto 6 ddr images.
- With TRUSTED_BOARD_BOOT = 1, fip_ddr.bin is authenticated
first before loading and starting DDR initialization.
- To successfully compile this image, platform-defined header files
needs to be defined:
-- include/common/tbbr/tbbr_img_def.h uses:
--- plat_tbbr_img_def.h: platform specific new FIP image macros.
-- include/tools/share/firmware_image_package.h uses:
--- plat_def_fip_uuid.h: platform specific new UUID macros.
---- Added UUID for DDR images to create FIP-DDR.
---- Added UUID for FUSE provisioning images to create FIP-fuse.
-- include/tools/share/tbbr_oid.h uses:
--- platform_oid.h: platform specific new OID macros.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Icbcf1673a8c398aae98680b5016f4276b4864b91
function load_img(), is dependent on:
- Recursively calling load_image() defined in common/bl_common.c
- for each image in the fip.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I57ca4b666cd1b0b992b7c0fc2a4260b558c0e2a9
bl31-data file written in assembly helps to manage data at bl31.
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ic3ace03364648cc1174bb05b5b334b9ccdaaa4ed
NXP specifc macro SET_NXP_MAKE_FLAG is added.
NXP has pool of multiple IPs. This macro helps:
- In soc.mk, this macro help the selected IP source files to be included
for that SoC.
-- The set of IPs required for one NXP SoC is different to the set of IPs
required by another NXP SoC.
- For the same SoC,
-- For one feature, the IP may be required in both BL2 and BL31.
-- Without the above feature, that IP may be required in one.
This macro help in selecting the inclusion of source and header files to:
--- BL2 only
--- BL31 only
--- COMM (used by BL2 and BL31)
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I2cdb13b89aa815fc5219cf8bfb9666d0a9f78765
Jiafei Pan
Pankaj Gupta