Use helper functions to get SPI and ESPI INTID limit, to remove
several pieces of similar code in gicv3 driver.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: Iaf441fe5e333c4260e7f6d98df6fdd931591976d
Add helper function gicv3_get_espi_limit() to get the value of
(maximum extended SPI INTID + 1), so that some duplicated code can be
removed later.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I0355ca2647f872e8189add259f6c47d415494cce
Add newline(\n) to make the message clearer when the warnings are
really triggered.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I5e2574a52c9065db32ecb4d453b9b02445f69a82
Add helper function gicv3_get_spi_limit() to get the value of (maximum
SPI INTID + 1), so that some duplicated code can be removed later.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I160c8a88fbb71d22790b8999a84afbfba766f5e7
When retrieving data from stm32 image file, the header is removed with
a memcpy that shifts the data to overwrite the useless header for next
binary.
STM32 binary from boot device:
|-------------------------------------|
| header | payload |
|-------------------------------------|
After the memcpy:
|-------------------------------------|
| payload | remain |
|-------------------------------------|
But the remaining data after the shifted payload is still in
the cache. As it is of no use for anyone, just invalidate the cache
at this address.
This is required if the DDR is mapped secure in BL2, and the secure
access is forbidden in BL33, or else TZC-400 issues an error.
Change-Id: Ice2af3b1ca49eccb79bfc62db60437e259d344ca
Signed-off-by: Yann Gautier <yann.gautier@st.com>
A variable hdr_sz is created in stm32image_partition_read() function.
It just represents the size of the stm32 image header but it really
improves the readability of the function.
Change-Id: I95ec62a78a4b6c6a75b0d8c8aa0faef8bee424da
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Fixes implementation against build warning reported by GCC:
drivers/st/io/io_stm32image.c: In function ‘stm32image_partition_read’:
drivers/st/io/io_stm32image.c:249:6: error: ‘result’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
int result;
^~~~~~
Actually, by construction the current implementation of function
stm32image_partition_read() does not mandate result to be initialized
since it always reaches the exit point with a valid value in 'result'.
Yet, this change prevents compiler from complaining and is more robust
against future changes in the implementation.
Change-Id: I383575edb605b7535398952a5fdfc266c0068c71
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Use dedicated read function for boot partition
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: If75df7691fce0797205365736fc6e4e3429efdca
Added a public function to read blocks from a current boot partition.
switch between partitions has to respect eMMC partition switch timing.
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: I55b0c910314253e5647486609583fd290dadd30a
The UART code for the A3K platform assumes that UART parent clock rate
is always 25 MHz. This is incorrect, because the xtal clock can also run
at 40 MHz (this is board specific).
The frequency of the xtal clock is determined by a value on a strapping
pin during SOC reset. The code to determine this frequency is already in
A3K's comphy driver.
Move the get_ref_clk() function from the comphy driver to a separate
file and use it for UART parent clock rate determination.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I8bb18a2d020ef18fe65aa06ffa4ab205c71be92e
when comphy is in pcie mode, correct reference clock need be
selected according to SAR register that reflect the CPx_MPP boot
strapping pins. Either from external or from internal
Signed-off-by: Guo Yi <yguo@cavium.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Change-Id: I99ed64a141e85174cc0f8e9dab5886ab2506efa1
When configuring the UART_BAUD_REG register, the function
console_a3700_core_init() currently only changes the baud divisor field,
leaving other fields to their previous value.
This is incorrect, because the baud divisor is computed with the
assumption that the parent clock rate is 25 MHz, and since the other
fields in this register configure the parent clock, which could have
been changed by U-Boot or Linux.
Fix this function to also configure the other fields so that the UART
parent clock is selected to be the xtal clock.
For example without this change TF-A prints only
ERROR: a3700_system_off needs to be implemented
followed by garbage after plat_crash_console_init() is called.
After applying this change instead of garbage it also print crash info:
PANIC at PC : 0x0000000004023800
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I72f338355cc60d939b8bb978d9c7fdd576416b81
UART parent clock is by default the platform's xtal clock, which is
25 MHz.
The value defined in the driver, though, is 25.8048 MHz. This is a hack
for the suboptimal divisor calculation
Divisor = UART clock / (16 * baudrate)
which does not use rounding division, resulting in a suboptimal value
for divisor if the correct parent clock rate was used.
Change the code for divisor calculation to
Divisor = Round(UART clock / (16 * baudrate))
and change the parent clock rate value to 25 MHz.
The final UART divisor for default baudrate 115200 is not affected by
this change.
(Note that the parent clock rate should not be defined via a macro,
since the xtal clock can also be 40 MHz. This is outside of the scope of
this fix, though.)
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iaa401173df87aec94f2dd1b38a90fb6ed0bf0ec6
Platform NV counter get updated (if cert NV counter > plat NV counter)
before authenticating the certificate if the platform specifies NV
counter method before signature authentication in its CoT, and this
provides an opportunity for a tempered certificate to upgrade the
platform NV counter. This is theoretical issue, as in practice none
of the standard CoT (TBBR, dualroot) or upstream platforms ones (NXP)
exercised this issue.
To fix this issue, modified the auth_nvctr method to do only NV
counter check, and flags if the NV counter upgrade is needed or not.
Then ensured that the platform NV counter gets upgraded with the NV
counter value from the certificate only after that certificate gets
authenticated.
This change is verified manually by modifying the CoT that specifies
certificate with:
1. NV counter authentication before signature authentication
method
2. NV counter authentication method only
Change-Id: I1ad17f1a911fb1035a1a60976cc26b2965b05166
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
* changes:
renesas: rzg: Add support to identify EK874 RZ/G2E board
drivers: renesas: common: watchdog: Add support for RZ/G2E
drivers: renesas: rzg: Add QoS support for RZ/G2E
drivers: renesas: rzg: Add PFC support for RZ/G2E
drivers: renesas: common: Add support for DRAM initialization on RZ/G2E SoC
renesas: rzg: Add support to identify HopeRun HiHope RZ/G2N board
drivers: renesas: common: emmc: Select eMMC channel for RZ/G2N SoC
drivers: renesas: rzg: Add QoS support for RZ/G2N
drivers: renesas: rzg: Add PFC support for RZ/G2N
drivers: renesas: common: Add support for DRAM initialization on RZ/G2N SoC
renesas: rzg: Add support to identify HopeRun HiHope RZ/G2H board
drivers: renesas: common: emmc: Select eMMC channel for RZ/G2H SoC
drivers: renesas: rzg: Add QoS support for RZ/G2H
drivers: renesas: rzg: Add PFC support for RZ/G2H
drivers: renesas: common: Add support for DRAM initialization on RZ/G2H SoC
drivers: renesas: rzg: Switch using common ddr code
drivers: renesas: ddr: Move to common
Add support to identify Silicon Linux RZ/G2E evaluation kit (EK874).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: Id7bdbc9b0d25aa9af496d58d4bd5055579edc104
Add pin control support for RZ/G2E SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: I736724cc0dd32f2169018ed7f2f48319b039b61f
DRAM initialization on RZ/G2E SoC is identical to R-Car E3 so re-use the
same.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: I454fb40af4f8ce6c4c0d2a53edb307326efd02df
Add pin control support for RZ/G2N SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: Ib5eb4f3b1b75e158ec13c4eefdbe9688344206a3
Add support for initializing DRAM on RZ/G2N SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: Id09a367b92b11a5da88f2dce6887677cc935d0c0
Add pin control support for RZ/G2H SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: I06dc259d7d26a5a5313e8731ea72f846bfca09ed
Add support for initializing DRAM on RZ/G2H SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: Iae23f1093f65a9efd065d37b7d6e9340ff6350b9
Switch using common ddr driver code from renesas/common/ddr directory
for RZ/G2M SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: I807dcb0bc5186bd32bc1c577945d28634bb10e1f
Move ddr driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: I9aef73d3e9a027a127ce7483b72d339559866727
By default the Arm Ethos-N NPU will boot up in secure mode. In this mode
the non-secure world cannot access the registers needed to use the NPU.
To still allow the non-secure world to use the NPU, a SiP service has
been added that can delegate non-secure access to the registers needed
to use it.
Only the HW_CONFIG for the Arm Juno platform has been updated to include
the device tree for the NPU and the platform currently only loads the
HW_CONFIG in AArch64 builds.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I65dfd864042ed43faae0a259dcf319cbadb5f3d2
Some Marvell SoCs may have crypto engine disabled in the HW.
This patch checks the AP LD0 efuse for crypto engine/TRNG
presence before initializing the driver.
Change-Id: I441e7c69a137106bd36302b028b04c0b31896dbd
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/47314
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Yi Guo <yi.guo@cavium.com>
This patch forces rx training on 10G ports
as part of comphy_smc call from Linux.
Signed-off-by: Alex Evraev <alexev@marvell.com>
Change-Id: Iebe6ea7c8b21cbdce5c466c8a69b92e9d7c8a8ca
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/30763
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Setting MSS_SUPPORT to 0 also removes requirement for SCP_BL2
definition.
Images build with MSS_SUPPORT=0 will not include service CPUs
FW and will not support PM, FC and other features implemented
in these FW images.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Change-Id: Idf301ebd218ce65a60f277f3876d0aeb6c72f105
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/37769
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Ofer Heifetz <oferh@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Linux cpu clk driver requires access to some dfx registers. By adding
these registers to the white list, we enable access to them from
non-secure world.
Change-Id: Ic05c96b375121c025bfb41c2ac9474a530720155
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-on: https://sj1git1.cavium.com/25187
Tested-by: Kostya Porotchkin <kostap@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Since the dfx register set is going to be marked as secure expose dfx
secure read and write function via SiP services. In introduced misc_dfx
driver some registers are white-listed so non-secure software can still
access them.
This will allow non-secure word drivers access some white-listed
registers related to e.g.: Sample at reset, efuses, SoC type and
revision ID accesses.
Change-Id: If9ae2da51ab2e6ca62b9a2c940819259bf25edc0
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-on: https://sj1git1.cavium.com/25055
Tested-by: Kostya Porotchkin <kostap@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Since more drivers which uses dfx register set need to be handled with
use of SiP services, use dedicated and more meaningful name for thermal
SiP services.
Change-Id: Ic2ac27535a4902477df8edc4c86df3e34cb2344f
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-on: https://sj1git1.cavium.com/25054
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Since the dfx register set is going to be marked as secure (in order to
protect efuse registers for non secure access), accessing thermal
registers which are part of dfx register set, will not be possible from
lower exception levels. Due to above expose thermal driver as a SiP
service. This will allow Linux and U-Boot thermal driver to initialise
and perform various operations on thermal sensor.
The thermal sensor driver is based on Linux
drivers/thermal/armada_thermal.c.
Change-Id: I4763a3bf5c43750c724c86b1dcadad3cb729e93e
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-on: https://sj1git1.cavium.com/20581
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Tested-by: Kostya Porotchkin <kostap@marvell.com>
Mark Dykes
Lionel Debieve
Madhukar Pappireddy
Heyi Guo
Manish Pandey
Yann Gautier
Nicolas Le Bayon
Vyacheslav Yurkov
Pali Rohár
Guo Yi
Manish V Badarkhe
Lad Prabhakar
Mikael Olsson
Konstantin Porotchkin
Alex Evraev
Grzegorz Jaszczyk
Alex Leibovich
Yann Gautier