Include necessary header file to use ARRAY_SIZE() macro
Change-Id: I5b7caccd02c14c598b7944cf4f347606c1e7a8e7
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
The legacy console is gone. Re-add the console support based on the
multi-console framework.
I am still keeping the putc, getc, and flush callbacks in
uniphier_console.S to use plat/common/aarch64/crash_console_helpers.S
The console registration code already relies on that C environment
has been set up. So, I just filled the struct console fields with the
callback pointers, then called console_register() directly. I also
re-implemented the init function in C to improve the readability.
Removing the custom crash console implementation has one disadvantage;
we cannot use the crash console on very early crashes because
crash_console_helpers.S works only after the console is registered.
I can live with this limitation.
Tested on my boards, and confirmed this worked like before.
Change-Id: Ieab9c849853ff6c525c15ea894a85944f257db59
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
These errors are asynchronous and cannot be directly correlated with the
exact current running software, so handling them in the same EL is not
critical. Handling them in TF-A allows for more platform specific
decoding of the implementation defined exception registers
Signed-off-by: Andrew F. Davis <afd@ti.com>
Change-Id: Iee7a38c9fc9c698fa0ad42dafa598bcbed6a4fda
CAAM module must be initialized in secure world
before it can be used in non-secure world.
Change-Id: I042893667ddef99d8b6fc3902847d516d8591996
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
* changes:
qemu: use new console interface in aarch32
warp7: remove old console from makefile
Remove MULTI_CONSOLE_API flag and references to it
Console: removed legacy console API
N1SDP platform supports RDIMMs with ECC capability. To use the ECC
capability, the entire DDR memory space has to be zeroed out before
enabling the ECC bits in DMC620. Zeroing out several gigabytes of
memory from SCP is quite time consuming so functions are added that
zeros out the DDR memory from application processor which is
much faster compared to SCP. BL33 binary cannot be copied to DDR memory
before enabling ECC so this is also done by TF-A from IOFPGA-DDR3
memory to main DDR4 memory after ECC is enabled.
Original PLAT_PHY_ADDR_SPACE_SIZE was limited to 36-bits with which
the entire DDR space cannot be accessed as DRAM2 starts in base
0x8080000000. So these macros are redefined for all ARM platforms.
Change-Id: If09524fb65b421b7a368b1b9fc52c49f2ddb7846
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
Now that PFC drivers are cleaned up , move them out of staging.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Ie594b53558c2bfb8e5d88e5b0354752c17a2487e
Let bl31_check_ns_address() print the address it doesn't like.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Change-Id: I29a4fb33c24e9f7464ccd2ea44a4608f5cfe5be6
* changes:
fdts: stm32mp1: realign device tree files with internal devs
stm32mp1: increase device tree size to 20kB
stm32mp1: make dt_get_stdout_node_offset() static
stm32mp1: use unsigned values for SDMMC defines
stm32mp1: remove useless LIBFDT_SRCS from PLAT_BL_COMMON_SOURCES
stm32mp1: update doc for U-Boot compilation
stm32mp1: add general SYSCFG management
stm32mp1: move stm32_get_gpio_bank_clock() to private file
clk: stm32mp1: correctly handle Clock Spreading Generator
clk: stm32mp1: use defines for mask values in stm32mp1_clk_sel array
clk: stm32mp1: move oscillator functions to generic file
arch: add some defines for generic timer registers
Now that QoS drivers are cleaned up , move them out of staging.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: If61ab2157c30b8f5a6b91d2c56ddbb9098ef99e8
Do not export function dt_get_stdout_node_offset() that is used only inside
stm32mp_dt.c source file.
Change-Id: I9dd3dbfab21d42ed81c68723e71fe5a7586dce93
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Correct SDMMC macros to define unsigned values as expected by the
driver implementation.
Change-Id: Ib009f3df2cf26a9759d129eb571a27b2564770ce
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Remove inclusion of libfdt source files in source file list since these
are already included from generic libfdt.mk makefile.
Change-Id: If42624557c4d88ca85d70f83b1b08c58f50afe72
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The system configuration controller is mainly used to manage
the compensation cell and other IOs and system related settings.
The SYSCFG driver is in charge of configuring masters on the interconnect,
IO compensation, low voltage boards, or pull-ups for boot pins.
All other configurations should be handled in Linux drivers requiring it.
Device tree files are also updated to manage vdd-supply regulator.
Change-Id: I10fb513761a7d1f2b7afedca9c723ad9d1bccf42
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
GPIOx clocks are specific to each STM32MP platforms.
This change moves function stm32_get_gpio_bank_clock() from stm32mp
common source files to platform private stm32mp1_private.c source file.
Change-Id: I9616c0d3fe4d10af715d6f2d1550c13ab62c829a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Those functions are generic for parsing nodes from device tree
hence could be located in generic source file.
The oscillators description structure is also moved to STM32MP1 clock
driver, as it is no more used in stm32mp1_clkfunc and cannot be in a
generic file.
Change-Id: I93ba74f4eea916440fef9b160d306af1b39f17c6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Convert the R-Car Gen3 platform and both SCIF and Log drivers
to multi-console API.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I18556973937d150b60453f9150d54ee612571e35
BL2U should not build when RESET_TO_SP_MIN flag is set, like BL1 and
BL2.
Change-Id: Iac516121f98611ca1f58d2b5efdec6525b06ce4e
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
As all Allwinner platforms are single-cluster A53 chips, we can disable
support for newer, unsupported architecture extensions. We can also
avoid some cache maintenance code, since no platform-specific setup is
required to enable coherency.
These changes reduce the size of .text on a default build with GCC 9.1
enough that .vectors again fits in the second half of a page, instead
of requiring its own page.
This commit was boot-tested on the Pinebook.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Ib90454ef0c798d5e714b7780c585be0b1ed49c6d
We previously left our caches on during power-down to prevent any
non-caching accesses to memory that is cached by other cores. Now with
the last accessed areas all being marked as non-cached by
USE_COHERENT_MEM we can rely on that to workaround our interconnect
issues. Remove the old workaround.
Change-Id: Idadb7696d1449499d1edff4f6f62ab3b99d1efb7
Signed-off-by: Andrew F. Davis <afd@ti.com>
HW_ASSISTED_COHERENCY implies something stronger than just hardware
coherent interconnect, specifically a DynamIQ capable ARM core.
For K3, lets use WARMBOOT_ENABLE_DCACHE_EARLY to enable caches early
and then let the caches get shut off on powerdown, to prevent data
corruption we also need to USE_COHERENT_MEM so that any accesses to
shared memory after this point is only to memory that is set as
non-cached for all cores.
Change-Id: Ib9337f012df0e0388237942607c501b6f3e2a949
Signed-off-by: Andrew F. Davis <afd@ti.com>
During the secondary cores' cold boot path, the cores initialise the GIC
CPU interface. However this is a redundant action since 1) the cores are
powered down immediately after that, 2) the GIC CPU interface is
initialised from scratch when the secondary cores are powered up again
later.
Moreover, this part of code was introducing a bug. In a GICv3 system,
the GIC's CPU interface system registers must not be written without the
core being marked as "awake" in the redistributor. However, this
sequence was performing such accesses and this would cause those cores
to hang. The hang was caused by the DSB instruction that would never
complete because of the GIC not recognising those writes.
For the two aforementioned reasons, the entire part of the GIC CPU
interface initialisation is removed.
Change-Id: I6c33a1edda69dd5b6add16a27390a70731b5532a
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
Some cores support only AArch64 mode. In those cores, only a limited
subset of the AArch32 system registers are implemented. Hence, if TF-A
is supposed to run on AArch64-only cores, it must be compiled with
CTX_INCLUDE_AARCH32_REGS=0.
Currently, the default settings for compiling TF-A are with the AArch32
system registers included. So, if we compile TF-A the default way and
attempt to run it on an AArch64-only core, we only get a runtime panic.
Now a compile-time check has been added to ensure that this flag has the
appropriate value when AArch64-only cores are included in the build.
Change-Id: I298ec550037fafc9347baafb056926d149197d4c
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
In the rockchip bl31 setup the __RO_START__ and __RO_END__ symbols are
currently imported into special BL31_RO_* constants while the general
code also imports them as BL_CODE_BASE and BL_CODE_END.
So we can just use the general symbols and can drop the duplication.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: Ibf1b48ad80bed897247a1690a32711030479262d
Sandrine Bailleux
Madhukar Pappireddy
Masahiro Yamada
Andrew F. Davis
Jacky Bai
Soby Mathew
Ambroise Vincent
Paul Beesley
Manoj Kumar
Hadi Asyrafi
Marek Vasut
Andreas Färber
John Tsichritzis
Yann Gautier
Louis Mayencourt
Samuel Holland
kenny liang
Heiko Stuebner