Refactor the GPIO code to use a small lookup table instead of redundant or
repetitive code.
Signed-off-by: Jona Stubbe <tf-a@jona-stubbe.de>
Change-Id: Icf60385095efc1f506e4215d497b60f90e16edfd
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
We don't use mbox drivers which are implemented in these files for
mcdi, so remove related files from mcdi folder.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Idea5ebe5b25f91066ebd653cdcdafe65ca292b0f
For somewhat historical reasons we are doing some initial PMIC regulator
setup in BL31, as U-Boot does not (yet) have a PMIC driver. This worked
fine so far, but there is at least one board (OrangePi 3) that gets upset,
because the Ethernet PHY needs some *coordinated* bringup of *two*
regulators.
To avoid custom hacks, let's introduce a build option to keep doing the
regulator setup in TF-A. Defining SUNXI_SETUP_REGULATORS to 0 will break
support for some devices on some boards in U-Boot (Ethernet and HDMI),
but will allow to bring up the OrangePi 3 in Linux correctly. We keep
the default at 1 to not change the behaviour for all other boards.
After U-Boot gained proper PMIC support at some point in the future, we
will probably change the default to 0, to get rid of the less optimal
PMIC code in TF-A.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Ie8e2583d0396f6eeaae8ffe6b6190f27db63e2a7
Use regulator framework to get CPU and VDD power supplies.
Change-Id: Ice745fb21ff10e71ef811e747165499c2e19253e
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
print_pmic_info_and_debug() prints the PMIC version ID and displays
regulator information if debug is enabled.
It is under DEBUG flag and called after initialize_pmic() in BL2.
Change-Id: Ib81a625740b7ec6abb49cfca05e44c69efaa4718
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
SYSCFG can be initialized later, after console is up, to display the
warnings or messages it could issue.
PMIC should be initialized earlier, before SYSCFG init.
Change-Id: Icc3a1366083a1b1fde7f0e173645449b4c04c49b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This is mainly a clock interface with clk_ops callbacks.
Those callbacks are: enable, disable, get_rate, set_parent,
and is_enabled.
This framework is compiled for STM32MP1.
Change-Id: I5119a2aeaf103ceaae7a60d9e423caf0c148d794
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Currently only UART0 is handled as console device, fix the
code to support UART1 as console also.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: Ifcd3c331cf6ce4afb0074357c92fc4addb9438b6
Currently only UART0 is handled as console device, fix the
code to support UART1 as console also.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I08f69b65b78b967ceb7159f4a467aa5982b1f791
Add MCDI related drivers to handle CPU powered on/off in CPU suspend.
TEST=build pass
BUG=b:202871018
Change-Id: I85aaaf3a0e992a39d17c58f3d9d5ff1b5770f748
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Implement PSCI platform operations to support CPU hotplug and MCDI.
TEST=bringup 8 CPUs successfully on kernel stage.
BUG=b:202871018
Change-Id: Ibd5423b70b3ca3f91edaa48d7ca5bc094e751510
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
In mt8186 suspend/resume flow, ATF has to communicate with a subsys by
read/write the subsys registers. However, the register region of subsys
doesn't include in the MMU mapping region. It triggers MMU faults.
This patch extends the MMU region 0 size to cover all mt8186 HW modules.
This patch also remove MMU region 1 because region 0 covers region 1.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I520c51338578bd68756cd02603ce6783f93daf51
DCM means dynamic clock management, and it can dynamically
slow down or gate clocks during CPU or bus idle.
1. Add MCUSYS related DCM drivers.
2. Enable MCUSYS related DCM by default.
TEST=build pass
BUG=b:202871018
Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.corp-partner.google.com>
Change-Id: Idc669364c89cde0974d2940bd12987ee833d1965
EMI MPU stands for external memory interface memory protect unit.
MT8186 supports 32 regions and 16 domains.
We add basic driver currently, and will add more settings for
EMI MPU in next patch.
TEST=build pass
BUG=b:202871018
Signed-off-by: Penny Jan <penny.jan@mediatek.corp-partner.google.com>
Change-Id: Ia9e5030164e40e060a05e8f91d2ac88258c2e98e
Warnings about header files include order were triggered by CI.
Correct the include order to mathc CI requirements.
Change-Id: Iaca959add924e0e1fa2e56fab2348f0ee36e5fa7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Cortex X2 erratum 2083908 is a Cat B erratum present in the Cortex
X2 core. It applies to revision r2p0 and is still open.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Id9dca2b042bf48e75fb3013ab37d1c5925824728
SoC UART1 is internally connected to MCP UART1 so this
cannot be used as AP runtime UART instead we use the
IOFPGA UART0 as the AP runtime UART.
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Change-Id: Iecefb0d2cb875b3ecf97e0983b06f6e914835021
This patch adds support to load nt_fw_config
with the information from plat_info sds
structure which is then passed from BL2 to BL33.
Signed-off-by: sah01 <sahil@arm.com>
Change-Id: I2242da7404c72a4f9c2e3d7f3b5c154890a78526
Different platform_info sds struct definition will be used
for fvp and soc.
Signed-off-by: sahil <sahil@arm.com>
Change-Id: I92f0e1b2d0d755ad0405ceebfeb78d6e4c67013d
This patch adds all SOC and FVP related changes required to boot
a standard TBBR style boot on Morello.
Signed-off-by: sahil <sahil@arm.com>
Change-Id: Ib8f7f326790b13082cbe8db21a980e048e3db88c
Based on the SCC configuration value obtained from the SDS
platform information structure configure DMC-Bing Server or
Client mode after zeroing out the memory.
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Change-Id: I0555fa06c9c1906264848f4e32ca413b4742cdee
For Morello SoC, we use ECC capability for the RDIMMs
which require the entire DDR memory space to be zeroed
out before it can be accessed.
Change-Id: Icbe9916f9a2d3c4ce839d8bf7f867efa18f33e23
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
The same folder "plat/arm/board/morello" is going to be
used by both Morello FVP and Morello SoC platforms.
TARGET_PLATFORM build flag has been introduced to
differentiate between the two platforms
Change-Id: I3e94da372a3f1ba810b4259b85dd4c204306c359
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
There might be several platforms which use the
TARGET_PLATFORM build option to differentiate the code
between the platform variants.
Use of TARGET_PLATFORM in the common code leads to build
failures instead use PLAT build option.
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Change-Id: I9724caf875bd56225e035ecffa8b9ca1a50d3401
Protect the UART instance used for serial boot
with UART used for console.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: Ieee1557b34e7baa81594c3fbf0513191737027bf
Use stm32mp_uart_console_setup() in SP_min setup.
Adapt the function stm32mp_uart_console_setup() for BL32 (no reset, add
CONSOLE_FLAG_RUNTIME under DEBUG.
Change-Id: Ib2d35c8d285dafb680aa218872ad679cbf43d0ed
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Use newly created function stm32mp_uart_console_setup().
And remove now useless code.
Change-Id: Ib8d0319d3f4f54309848bc225b58608cea73bad9
Signed-off-by: Yann Gautier <yann.gautier@st.com>
To ease console configuration, a dedicated function is created:
stm32mp_uart_console_setup(). The code will also be common for the
different BLs.
Change-Id: Idf3cad756f125ca2313cf30b1311637a9df8f27f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Jona Stubbe
André Przywara
Rex-BC Chen
Madhukar Pappireddy
Pascal Paillet
Yann Gautier
Nicolas Le Bayon
Yann Gautier
Gabriel Fernandez
Venkatesh Yadav Abbarapu
Garmin.Chang
Yuchen Huang
Edward-JW Yang
Guodong Liu
Zhengnan Chen
Christine Zhu
James Lo
Penny Jan
Bipin Ravi
johpow01
Chandni Cherukuri
sah01
Manoj Kumar