This patch introduces a function ID to clear all the RAS error
records for corrected errors.
Per latest requirement, ARM RAS corrected errors will be reported to
lower ELs via interrupts and cleared via SMC. This patch provides
required function to clear RAS error status.
This patch also sets up all required RAS Corrected errors in order to
route RAS corrected errors to lower ELs.
Change-Id: I554ba1d0797b736835aa27824782703682c91e51
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: David Pu <dpu@nvidia.com>
This patch increases the maximum timeout value for SE operation
completion to 1 second. This takes care of some corner cases where
an operation might take more time than the previous timeout value
of 100ms.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I0012448ba372a8bb0e156df7dfe49d7de6d21a68
This patch removes support to secure the on-chip TZSRAM memory for
Tegra186 and Tegra194 platforms as the previous bootloader does that
for them.
Change-Id: I50c7b7f9694285fe31135ada09baed1cfedaaf07
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch updates the t194_nvg.h header file received from the CPU
team to v6.7.
Change-Id: I5d25dfc60448e14b7085250946bd002fcb80a774
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>
This patch fixes the SE clock ID being used for Tegra186 and Tegra194
SoCs. Previous assumption, that both SoCs use the same clock ID, was
incorrect.
Change-Id: I1ef0da5547ff2e14151b53968cad9cc78fee63bd
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The BL3-1 firmware code is stored in TZSRAM on Tegra194 platforms. This
memory loses power when we enter System Suspend and so its contents are
stored to TZDRAM, before entry. This opens up an attack vector where the
TZDRAM contents might be tampered with when we are in the System Suspend
mode. To mitigate this attack the SE engine calculates the hash of entire
TZSRAM and stores it in PMC scratch, before we copy data to TZDRAM. The
WB0 code will validate the TZDRAM and match the hash with the one in PMC
scratch.
This patch adds driver for the SE engine, with APIs to calculate the hash
and store to PMC scratch registers.
Change-Id: I04cc0eb7f54c69d64b6c34fc2ff62e4cfbdd43b2
Signed-off-by: Jeetesh Burman <jburman@nvidia.com>
This patch adds the nvg_roc_clean_cache_trbits() function prototype
to mce_private.h to fix compilation failures seen with the Tegra194
builds.
Change-Id: I313556f6799792fc0141afb5822cc157db80bc47
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes violations of the following MISRA rules
* Rule 8.5 "An external object or function shall be declared once in
one and only one file"
* Rule 10.3 "The value of an expression shall not be assigned to an
object with a narrower essential type or of a different
esential type category"
Change-Id: I4314cd4fea0a4adc6665868dd31e619b4f367e14
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes violations for the following MISRA rules
* Rule 8.4 "A compatible declaration shall be visible when an object or
function with external linkage is defined"
* Rule 10.1 "Operands shall not be of an inappropriate essential type"
* Rule 10.6 "Both operands of an operator in which the usual arithmetic
conversions are perdormed shall have the same essential type
category"
* Rule 17.7 "The value returned by a function having non-void return
type shall be used"
Change-Id: I171ac8340de729fd7be928fa0c0694e9bb8569f0
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This flag warns if anything is declared more than once in the same
scope, even in cases where multiple declaration is valid and changes
nothing.
Consequently, this patch also fixes the issues reported by this
flag. Consider the following two lines of code from two different source
files(bl_common.h and bl31_plat_setup.c):
IMPORT_SYM(uintptr_t, __RO_START__, BL_CODE_BASE);
IMPORT_SYM(unsigned long, __RO_START__, BL2_RO_BASE);
The IMPORT_SYM macro which actually imports a linker symbol as a C expression.
The macro defines the __RO_START__ as an extern variable twice, one for each
instance. __RO_START__ symbol is defined by the linker script to mark the start
of the Read-Only area of the memory map.
Essentially, the platform code redefines the linker symbol with a different
(relevant) name rather than using the standard symbol. A simple solution to
fix this issue in the platform code for redundant declarations warning is
to remove the second IMPORT_SYM and replace it with following assignment
static const unsigned long BL2_RO_BASE = BL_CODE_BASE;
Change-Id: If4835d1ee462d52b75e5afd2a59b64828707c5aa
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
This patch adds support to toggle SE clock, using the bpmp_ipc
interface, to enable SE context save/restore. The SE sequence mostly
gets called during System Suspend/Resume.
Change-Id: I9cee12a9e14861d5e3c8c4f18b4d7f898b6ebfa7
Signed-off-by: steven kao <skao@nvidia.com>
This patch adds support for shutdown/reboot handlers to the MCE
driver.
ATF communicates with mce using nvg interface for shutdown &
reboot. Both shutdown and reboot use the same nvg index.
However, the 1st bit of the nvg data argument differentiates
whether its a shutdown or reboot.
Change-Id: Id2d1b0c4fec55abf69b7f8adb65ca70bfa920e73
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>
This patch adds a new configuration option to the platform makefiles
that disables/enables strict checking mode. The config is enabled
by default.
Change-Id: I727dd0facee88d9517bf6956eaf9163eba25c8bb
Signed-off-by: Steven Kao <skao@nvidia.com>
This patch fixes the violations of Rule 21.1 from all the
header files.
Rule 21.1 "#define and #undef shall not be used on a reserved
identifier or reserved macro name"
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I12e17a5d7158defd33b03416daab3049749905fc
In further patches, we wish to enable -wredundant-decls check as
part of warning flags by default.
Change-Id: I43410d6dbf40361a503c16d94ccf0f4cf29615b7
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
The MCE driver's helper functions were using postive values as error
codes.
This patch updates the functions to return negative values as error
codes instead. Some functions are updated to use the right error code.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I3e2ecc30a6272a357e1a22ec850543fde2a694f6
This patch updates the header, t194_nvg.h, to v6.4. This
gets it in synch with MTS pre-release 2 - cl39748439.
Change-Id: I1093c9f5dea7b7f230b3267c90b54b7f3005ecd7
Signed-off-by: Steven Kao <skao@nvidia.com>
"Strict checking" is a mode where secure world can access
secure-only areas unlike legacy mode where secure world could
access non-secure spaces as well. Secure-only areas are defined
as the TZ-DRAM carveout and any GSC with the CPU_SECURE bit set.
This mode not only helps prevent issues with IO-Coherency but aids
with security as well.
This patch implements the programming sequence required to enable
strict checking mode for Tegra194 SoCs.
Change-Id: Ic2e594f79ec7c5bc1339b509e67c4c62efb9d0c0
Signed-off-by: Dilan Lee <dilee@nvidia.com>
The MCE driver checks the NVG interface version during boot and
disaplys the hardware and software versions on the console. The
software version is being displayed as zero.
This patch updates the prints to use the real NVG header version
instead.
Change-Id: I8e9d2e6c43a59a8a6d5ca7aa8153b940fce86709
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch does the following:
- cstate_info variable is used to pass on requested cstate to mce
- Currently, cg_cstate is encoded using 2 bits(bits 8, 9) in cstate_info
- cg_cstate values can range from 0 to 7, with 7 representing cg7
- Thus, cg_cstate is to be encoded using 3 bits (val: 0-7)
- Fix this, as per ISS and ensure bits 8, 9, 10 are used
Change-Id: Idff207e2a88b2f4654e4a956c27054bf5e8f69bb
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>
This patch adds the driver, to implement the programming sequence to
save/restore hardware context, during System Suspend/Resume.
Change-Id: If851a81cd4e699b58a0055d0be7f145759792ee9
Signed-off-by: Steven Kao <skao@nvidia.com>
Signed-off-by: Jeff Tsai <jefft@nvidia.com>
Rule 8.4, A compatible declaration shall be visible when an object
or function with external linkage is defined.
Add function delaration to the header file.
Add suffix U to the unsigned constant define.
Change-Id: I54eba913a5fa38e4fdf3655931dc421d9510c691
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
This patch cleans up the mce driver files to remove all the unsupported
functionality. The MCE/NVG interface is not restricted to the EL3 space,
so clients can issue commands to the MCE firmware directly.
Change-Id: Idcebc42f31805f9c1abe1c1edc17850151aca11d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Main fixes:
Added explicit casts (e.g. 0U) to integers in order for them to be
compatible with whatever operation they're used in [Rule 10.1]
Fix variable essential type doesn't match [Rule 10.3]
Added curly braces ({}) around if/while statements in order to
make them compound [Rule 15.6]
Voided non c-library functions whose return types are not used
[Rule 17.7]
Change-Id: Iaae2ecaba3caf1469c44910d4e6aed0661597a51
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
This patch updates t194_nvg.h to v6.1 and does not issue NVG
commands for unsupported platforms.
Change-Id: I506b594a70a3651d01a412ab79b3c8919b1d66f1
Signed-off-by: Steven Kao <skao@nvidia.com>
This patch updates the cache ops to use system registers in
order to trigger cache flush/clean operations.
Change-Id: I888abad22f22b8a33c7193b991fad8c4a78030d0
Signed-off-by: Steven Kao <skao@nvidia.com>
This patch adds proper checks for the cpu c-stats. It checks both
cpu id and stat id before sending the nvg request to ccplex.
Change-Id: I732957d1e10d6ce6cffb2c6f5963ca614aadd948
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
This patch changes direct writes to ACTLR_ELx registers to use
read-modify-write instead.
Change-Id: I536dce75c01356ce054dd2edee80875e56164439
Signed-off-by: Steven Kao <skao@nvidia.com>
This patch adds platform support for the Memory Controller and
SMMU drivers, for the Tegra194 SoC.
Change-Id: Id8b482de70f1f93bedbca8d124575c39b469927f
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
To fix MISRA defects, remove union in t186 MCE drivers
this driver should compatible with that.
Change-Id: I09e96a1874dd86626c7e41c92a1484a84e387402
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Dont run MCE firmware on pre-silicon emulation platforms
Change-Id: I2a8d653e46f494621580ca92271a18e62f648859
Signed-off-by: Rohit Khanna <rokhanna@nvidia.com>
GPU, MPCORE and PTC clients are changed and not going through SMMU.
Removing it from streamid list.
Change-Id: I14b450a11f02ad6c1a97e67e487d6d624911d019
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
This patch enable MCE driver for T19x SoC. The MCE driver
takes care of the communication with the MCE firmware to
achieve:
- Cold boot
- Warm boot
- Core/Cluster/System Power management
- Custom MCE requests
Change-Id: I75854c0b649a691e9b244d9ed9fc1c19743e3e8d
Signed-off-by: Steven Kao <skao@nvidia.com>
This patch adds support for all three SMMU devices present on the SoC.
The following changes have been done:
Add SMMU devices to the memory map
Update register read and write functions
Change-Id: I0007b496d2ae7264f4fa9f605d4b0a15fa747a0f
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Define mc sid and txn override regs and sec cfgs.
Create array for mc sid override regs and sec config that is
used to initialize mc.
Add smmu ctx regs array to hold register values during suspend.
Change-Id: I7b265710a9ec2be7dea050058bce65c614772c78
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
This patch creates the base commit for the Tegra194 platform, from
Tegra186 code base.
Change-Id: I1c77e4984f7ff39655f3fb79633d13d533707ede
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>