This commit enables trusted-firmware-a with Trusted Board Boot support
for the Diphda 64-bit platform.
Diphda uses a FIP image located in the flash. The FIP contains the
following components:
- BL2
- BL31
- BL32
- BL32 SPMC manifest
- BL33
- The TBB certificates
The board boot relies on CoT (chain of trust). The trusted-firmware-a
BL2 is extracted from the FIP and verified by the Secure Enclave
processor. BL2 verification relies on the signature area at the
beginning of the BL2 image. This area is needed by the SecureEnclave
bootloader.
Then, the application processor is released from reset and starts by
executing BL2.
BL2 performs the actions described in the trusted-firmware-a TBB design
document.
Signed-off-by: Rui Miguel Silva <rui.silva@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Change-Id: Iddb1cb9c2a0324a9635e23821c210ac81dfc305d
This patch adds the option HARDEN_SLS_ALL that can be used to enable
the -mharden-sls=all, which mitigates the straight-line speculation
vulnerability. Enable this by adding the option HARDEN_SLS_ALL=1,
default this will be disabled.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I0d498d9e96903fcb879993ad491949f6f17769b2
* changes:
fix(plat/marvell/a3k): Fix building uart-images.tgz.bin archive
refactor(plat/marvell/a3k): Rename *_CFG and *_SIG variables
refactor(plat/marvell/a3k): Rename DOIMAGETOOL to TBB
refactor(plat/marvell/a3k): Remove useless DOIMAGEPATH variable
fix(plat/marvell/a3k): Fix check for external dependences
fix(plat/marvell/a8k): Add missing build dependency for BLE target
fix(plat/marvell/a8k): Correctly set include directories for individual targets
fix(plat/marvell/a8k): Require that MV_DDR_PATH is correctly set
Old Marvell a3700_utils and mv-ddr tarballs do not have to work with
latest TF-A code base. Marvell do not provide these old tarballs on
Extranet anymore. Public version on github repository contains all
patches and is working fine, so for public TF-A builds use only public
external dependencies from git.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iee5ac6daa9a1826a5b80a8d54968bdbb8fe72f61
Target mrvl_flash depends on external mv_ddr source code which is not
part of TF-A project. Do not expect that it is pre-downloaded at some
specific location and require user to specify correct path to mv_ddr
source code via MV_DDR_PATH build option.
TF-A code for Armada 37x0 platform also depends on mv_ddr source code
and already requires passing correct MV_DDR_PATH build option.
So for A8K implement same checks for validity of MV_DDR_PATH option as
are already used by TF-A code for Armada 37x0 platform.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I792f2bfeab0cec89b1b64e88d7b2c456e22de43a
For Arm platforms PIE is enabled when RESET_TO_BL31=1 in aarch64 mode on
the similar lines enable PIE when RESET_TO_SP_MIN=1 in aarch32 mode.
The underlying changes for enabling PIE in aarch32 is submitted in
commit 4324a14bf
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib8bb860198b3f97cdc91005503a3184d63e15469
Due to the small OCRAM space used for TF-A, we will
meet imx8mq build failure caused by too small RAM size.
We CANNOT support it in TF-A CI. It does NOT mean that
imx8mq will be dropped by NXP. NXP will still actively
maintain it in NXP official release.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: Iad726ffbc4eedc5f6770612bb9750986b9324ae9
We currently use Linaro release software stack version
20.01 in the CI. Reflect that change in the docs.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I0fa9f0163afb0bf399ec503abe9af4f17231f173
Clean up instructions for building/running TF-A on the
Juno platform and add correct link to SCP binaries.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I536f98082e167edbf45f29ca23cc0db44687bb3b
This patch adds support for the crypto and secure storage secure
partitions for the Total Compute platform. These secure partitions
have to be managed by Hafnium executing at S-EL2
Change-Id: I2df690e3a99bf6bf50e2710994a905914a07026e
Signed-off-by: Davidson K <davidson.kumaresan@arm.com>
Reverting FVP versions to previous version 11.12.38 for Cortex-A32x4
and Neoverse-N2x4.
Change-Id: I81e8ad24794dd425a9e9a66dc8bb02b42191abf1
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Updated the list of supported FVP platforms as per the latest FVP
release.
Change-Id: I1abd0a7885b1133715062ee1b176733556a4820e
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Documented the build options used in Arm GPT parser enablement.
Change-Id: I9d7ef2f44b8f9d2731dd17c2639e5ed0eb6d0b3a
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This new compile option is only for Armada 3720 Development Board. When
it is set to 1 then TF-A will setup PM wake up src configuration.
By default this new option is disabled as it is board specific and no
other A37xx board has PM wake up src configuration.
Currently neither upstream U-Boot nor upstream Linux kernel has wakeup
support for A37xx platforms, so having it disabled does not cause any
issue.
Prior this commit PM wake up src configuration specific for Armada 3720
Development Board was enabled for every A37xx board. After this change it
is enabled only when compiling with build flag A3720_DB_PM_WAKEUP_SRC=1
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I09fea1172c532df639acb3bb009cfde32d3c5766
A Neoverse reference design platform can have two or more variants that
differ in core count, cluster count or other peripherals. To allow reuse
of platform code across all the variants of a platform, introduce build
option CSS_SGI_PLATFORM_VARIANT for Arm Neoverse reference design
platforms. The range of allowed values for the build option is platform
specific. The recommended range is an interval of non negative integers.
An example usage of the build option is
make PLAT=rdn2 CSS_SGI_PLATFORM_VARIANT=1
Change-Id: Iaae79c0b4d0dc700521bf6e9b4979339eafe0359
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
sgm775 is an old platform and is no longer maintained by Arm and its
fast model FVP_CSS_SGM-775 is no longer available for download.
This platform is now superseded by Total Compute(tc) platforms.
This platform is now deprecated but the source will be kept for cooling
off period of 2 release cycle before removing it completely.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I8fe1fc3da0c508dba62ed4fc60cbc1642e0f7f2a
By default the Arm Ethos-N NPU will boot up in secure mode. In this mode
the non-secure world cannot access the registers needed to use the NPU.
To still allow the non-secure world to use the NPU, a SiP service has
been added that can delegate non-secure access to the registers needed
to use it.
Only the HW_CONFIG for the Arm Juno platform has been updated to include
the device tree for the NPU and the platform currently only loads the
HW_CONFIG in AArch64 builds.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I65dfd864042ed43faae0a259dcf319cbadb5f3d2
Setting MSS_SUPPORT to 0 also removes requirement for SCP_BL2
definition.
Images build with MSS_SUPPORT=0 will not include service CPUs
FW and will not support PM, FC and other features implemented
in these FW images.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Change-Id: Idf301ebd218ce65a60f277f3876d0aeb6c72f105
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/37769
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Ofer Heifetz <oferh@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
CZ.NIC as part of Turris project released free and open source WTMI
application firmware 'wtmi_app.bin' for all Armada 3720 devices. This
firmware includes additional features like access to Hardware Random
Number Generator of Armada 3720 SoC which original Marvell's 'fuse.bin'
image does not have.
CZ.NIC's Armada 3720 Secure Firmware is available at website:
https://gitlab.nic.cz/turris/mox-boot-builder/
This change updates documentation to include steps how to build Marvell
firmware image for Espressobin with this firmware to enable Hardware
Random Number Generator on Espressobin.
In this change is fixed also URL to TF-A and U-Boot git repositories in
Espressobin build example. And as Marvell github repositories switched
default branch to master, explicit branch via -b parameter is redundant
and therefore from examples removed.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I59ee29cb6ed149264c5e4202f2af8f9ab3859418
As per the new multi-console framework, updating the JTAG DCC support.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I77994ce387caf0d695986df3d01d414a920978d0
As per the new multi-console framework, updating the JTAG DCC support.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I62cfbb57ae7e454fbc91d1c54aafa6e99f9a35c8
The new Allwinner H616 SoC lacks the management controller and the secure
SRAM A2, so we need to tweak the memory map quite substantially:
We run BL31 in DRAM. Since the DRAM starts at 1GB, we cannot use our
compressed virtual address space (max 256MB) anymore, so we revert to
the full 32bit VA space and use a flat mapping throughout all of it.
The missing controller also means we need to always use the native PSCI
ops, using the CPUIDLE hardware, as SCPI and suspend depend on the ARISC.
Change-Id: I77169b452cb7f5dc2ef734f3fc6e5d931749141d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Update the Allwinner platform documentation.
Reorder the section, to have the build instructions first, followed by
hints about the installation.
Add some ASCII art about the layout of our virtual memory map, which
uses a non-trivial condensed virtual address space.
Change-Id: Iaaa79b4366012394e15e4c1b26c212b5efb6ed6a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Adds bl2 with FIP to the build required for mbed Linux booting where
we do:
BootROM -> SPL -> BL2 -> OPTEE -> u-boot
If NEED_BL2 is specified then BL2 will be built and BL31 will have
its address range modified upwards to accommodate. BL31 must be
loaded from a FIP in this case.
If NEED_BL2 is not specified then the current BL31 boot flow is
unaffected and u-boot SPL will load and execute BL31 directly.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I655343b3b689b1fc57cfbedda4d3dc2fbd549a96
Added GIC600AE FVP model version information.
Change-Id: I15d25fbdb8e09900976d5993032ec049f8db79f2
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Added a build option 'FVP_GICR_REGION_PROTECTION' to make
redistributor frame of fused/unused cores as read only.
Change-Id: Ie85f86e2465b93321a92a888ce8712a3144e4ccb
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
* changes:
docs: marvell: Replace ESPRESSObin-Ultra TF-A build example by full example how to build production release of Marvell firmware image
docs: marvell: Fix description of flash-image.bin image
docs: marvell: Add information into CLOCKSPRESET option how to identify CPU frequency
docs: marvell: Reformat DDR_TOPOLOGY option and mention EspressoBin-Ultra board
docs: marvell: Move Supported Marvell platforms to PLAT build option
* changes:
docs: marvell: Update info about WTMI_IMG option
plat: marvell: armada: a3k: Remove unused variable WTMI_SYSINIT_IMG from Makefile
plat: marvell: armada: Show informative build messages and blank lines
plat: marvell: armada: Move definition of mrvl_flash target to common marvell_common.mk file
plat: marvell: armada: a3k: Use $(Q) instead of @
plat: marvell: armada: a3k: Add a new target mrvl_uart which builds UART image
plat: marvell: armada: a3k: Build UART image files directly in $(BUILD_UART) subdirectory
plat: marvell: armada: a3k: Build intermediate files in $(BUILD_PLAT) directory
plat: marvell: armada: a3k: Correctly set DDR_TOPOLOGY and CLOCKSPRESET for WTMI
plat: marvell: armada: a3k: Allow use of the system Crypto++ library
docs: marvell: Update info about WTP and MV_DDR_PATH parameters
plat: marvell: armada: a3k: Add checks that WTP, MV_DDR_PATH and CRYPTOPP_PATH are correctly defined
docs: marvell: Update mv-ddr-marvell and A3700-utils-marvell branches
ESPRESSObin-Ultra TF-A build example was now just a copy+paste of previous
mentioned example. It produced debug binary with custom log level, which
was not described. So rather replace this duplicate build example by a full
example with all steps how to build production release of Marvell firmware
image for EspressoBin with 1GHz CPU and 1GB DDR4 RAM.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ief1b8bc96a3035ebd8421bd68dca5eb5c8d8fd52
Reformat list of boards, remove unsupported OcteonTX2 and mention
supported Turris MOX board.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I22cea7f77fd078554c7f0ed4108781626209e563
Default WTMI_IMG value was documented incorrectly. Also WTMI_IMG name may
be misleading as this option does not specify full WTMI image, just a main
loop (e.g. fuse.bin or custom RTOS image) without hardware initialization
code (DDR, CPU and clocks).
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I3de4a27ce2165b962fa628c992fd8f80151efd7c
This change separates building of flash and UART images, so it is possible
to build only one of these images. Also this change allows make to build
them in parallel.
Target mrvl_flash now builds only flash image and mrvl_uart only UART
image. This change reflects it also in the documentation.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ie9ce4538d52188dd26d99dfeeb5ad171a5b818f3
This change introduces two new A3720 parameters, CRYPTOPP_LIBDIR and
CRYPTOPP_INCDIR, which can be used to specify directory paths to
pre-compiled Crypto++ library and header files.
When both new parameters are specified then the source code of Crypto++ via
CRYPTOPP_PATH parameter is not needed. And therefore it allows TF-A build
process to use system Crypto++ library.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I6d440f86153373b11b8d098bb68eb7325e86b20b
Marvell finally started providing the latest version of mv-ddr-marvell and
A3700-utils-marvell code in master branch of their git repositories.
Reflect this in build instructions.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I08d1189dac60eb2a28335c68f611c1da634106f6
Fix some typos and misspellings in TF-A documentation.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Change-Id: Id72553ce7b2f0bed9821604fbc8df4d4949909fa
* changes:
doc: renesas: Update code owner for Renesas platforms
doc: renesas: Document platforms based on RZ/G2 SoC's
renesas: rzg: Add PFC support for RZ/G2M
renesas: rzg: Add QoS support for RZ/G2M
renesas: rzg: Add support for DRAM initialization
The supported MARVELL_PLATFORM list is updated to include the recently added
a80x0_puzzle platform (IEI Puzzle-M801).
Additionally building instructions are added for the GST ESPRESSObin-Ultra
board (1 GB, DDR4 RAM variant), which has been tested successfully and booted
TF-A on the board.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Change-Id: Ie5724df27c1ee2e8f6a52664520579e872471e93
Document the platforms based on RZ/G2 SoC's.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I9ce5b9df3573b1198c5c7be79b5471d54573609a
Move RD-V1 platform to use version of FVP_RD_Daniel from 11.10 build 36
to 11.13 build 10
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I9622c03d342bb780234dec8ffe4ab11d8069acab
Introduce a new build option CM3_SYSTEM_RESET for A3700 platform, which,
when enabled, adds code to the PSCI reset handler to try to do system
reset by the WTMI firmware running on the Cortex-M3 secure coprocessor.
(This function is exposed via the mailbox interface.)
The reason is that the Turris MOX board has a HW bug which causes reset
to hang unpredictably. This issue can be solved by putting the board in
a specific state before reset.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I3f60b9f244f334adcd33d6db6a361fbc8b8d209f
This adds documentation for device tree build flag OPTEE_SP_FW_CONFIG.
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: Ie45f075cf04182701007f87aa0c8912cd567157a
Updated the list of supported FVP platforms with support for RD-N2 FVP.
Change-Id: I861bbb6d520c20e718f072e118c66dab61fe1386
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Also add example how to build TF-A for A3720 Turris MOX board and also fix
style/indentation issues and information about default values.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I2dc957307b1b627b403a8d960e85f5ac9e15aee5
After introducing the new STM32MP1 SoC versions in patch [1], the
document describing STM32MP1 platform is updated with the information
given in the patch commit message.
[1]: stm32mp1: add support for new SoC profiles
Change-Id: I6d7ce1a3c29678ddac78a6685f5d5daf28c3c3a1
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add information about 2GB variant of EspressoBin V5 and use Marvell git
branches which contain required fixes for EspressoBin.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I1db510f1576f4762259ad7b0c10024b8ab434a59
Now that the BLE image sources (mv_ddr) are updated, reflect
the proper branch in the Armada build howto.
Change-Id: I959d1343d0dfdd681c7e39bdcaed9b36aaddfca1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Morello platform has a SCP which brings the primary Rainier CPU
out of reset which starts executing at BL31.
This patch provides documentation support for Morello platform.
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Change-Id: I38f596668e2b14862d543fabc04549ff34bfb8a2
Updated the list of supported FVP platform as per latest
FVP platform release.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I45ef79aff147ed598a3a92ab6f6b277f7f70604a
stm32mp15_optee_defconfig has been dropped from U-Boot as it became
identical to stm32mp15_trusted_defconfig.
Furthermore give a hint how OP-TEE is supposed to be installed.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Change-Id: Id8f0bd84a87e3a62072dd4405aadddcdd3511213
* changes:
arm_fpga: Add platform documentation
arm_fpga: Add post-build linker script
arm_fpga: Add ROM trampoline
arm_fpga: Add devicetree file
arm_fpga: Remove SPE PMU DT node if SPE is not available
arm_fpga: Adjust GICR size in DT to match number of cores
fdt: Add function to adjust GICv3 redistributor size
drivers: arm: gicv3: Allow detecting number of cores
As the Arm Ltd. FPGA port is now working for all existing images, add
some documentation file.
Change-Id: I9e2c532ed15bbc121bb54b3dfc1bdfee8f1443a6
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
This patch adds support for Morello platform.
It is an initial port which includes only BL31 support
as the System Control Processor (SCP) is expected to take
the role of primary bootloader.
Change-Id: I1ecbe5a14a2d487b2ecea3c1ca227f08473ed2dd
Co-authored-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Signed-off-by: Anurag Koul <anurag.koul@arm.com>
Enable the spm_mm framework for the qemu_sbsa platform.
Memory layout required for spm_mm is created in secure SRAM.
Co-developed-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: I104a623e8bc1e44d035b95f014a13b3f8b33a62a
SP804 TIMER is not platform specific, and current code base adds
multiple defines to use this driver. Like FVP_USE_SP804_TIMER and
FVP_VE_USE_SP804_TIMER.
This patch removes platform specific build flag and adds generic
flag `USE_SP804_TIMER` to be set to 1 by platform if needed.
Change-Id: I5ab792c189885fd1b98ddd187f3a38ebdd0baba2
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Adding support for QTI CHIP SC7180 on ATF
Change-Id: I0d82d3a378036003fbd0bc4784f61464bb76ea82
Signed-off-by: Saurabh Gorecha <sgorecha@codeaurora.org>
Co-authored-by: Maulik Shah <mkshah@codeaurora.org>
These broken links were found with the help of this command:
$> sphinx-build -M linkcheck . build
A sample broken link is reported as follows:
(line 80) -local- firmware-design.rst#secure-el1-payloads-and-dispatchers
Change-Id: I5dcefdd4b8040908658115647e957f6c2c5da7c2
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Provide manifest and build options to boot OP-TEE as a
guest S-EL1 Secure Partition on top of Hafnium in S-EL2.
Increase ARM_SP_MAX_SIZE to cope with OP-TEE debug build image.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Idd2686fa689a78fe2d05ed92b1d23c65e2edd4cb
The purpose of rx_training had changed after last update. Currently it
is not supposed to help with providing static parameters for porting
layer. Instead, it aims to suit the parameters per connection.
Change-Id: I2a146b71e2e20bd264c090a9a627d0b6bc56e052
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Add references to the OcteonTX2 CN913x family.
Change-Id: I172a8e3d061086bf4843acad014c113c80359e01
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Update SGI-575, RD-E1-Edge and RD-N1-Edge FVP versions to 11.10/36 and
add RD-N1-Edge-Dual to the list of supported Arm Fixed Virtual
Platforms.
Change-Id: I9e7e5662324eeefc80d799ca5341b5bc4dc39cbb
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
This patch adds the following models
FVP_Base_Neoverse-E1x1
FVP_Base_Neoverse-E1x2
FVP_Base_Neoverse-E1x4
to the list of supported FVP platforms.
Change-Id: Ib526a2a735f17724af3a874b06bf69b4ca85d0dd
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The LLC SRAM will be enabled in OP-TEE OS for usage as secure storage.
The CCU have to prepare SRAM window, but point to the DRAM-0 target
until the SRAM is actually enabled.
This patch changes CCU SRAM window target to DRAM-0
Remove dependence between LLC_SRAM and LLC_ENABLE and update the
build documentation.
The SRAМ base moved to follow the OP-TEE SHMEM area (0x05400000)
Change-Id: I85c2434a3d515ec37da5ae8eb729e3280f91c456
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
The i.MX 8MP Media Applications Processor is part of the growing
i.MX8M family targeting the consumer and industrial market. It brings
an effective Machine Learning and AI accelerator that enables a new
class of applications. It is built in 14LPP to achieve both high
performance and low power consumption and relies on a powerful fully
coherent core complex based on a quad core Arm Cortex-A53 cluster and
Cortex-M7 low-power coprocessor, audio digital signal processor, machine
learning and graphics accelerators.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I98311ebc32bee20af05031492e9fc24d06e55f4a
Fix the version inconsistency in the same file.
I tested QEMU 5.0.0, and it worked for me.
Change-Id: I9d8ca9aae1e413410eb5676927e13ae4aee9fad8
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In my understanding, /dev/vda2 does not exist unless you add
virtio drive to the qemu command line.
The rootfs is already specified by '-initrd rootfs.cpio.gz'.
Change-Id: Ifdca5d4f3819d87ef7e8a08ed870872d24b86370
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit solves the limitation, "No build instructions for
QEMU_EFI.fd and rootfs-arm64.cpio.gz"
Document the steps to build them.
Change-Id: Ic6d895617cf71fe969f4aa9820dad25cc6182023
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Abdellatif El Khlifi
Venkatesh Yadav Abbarapu
Manish Pandey
Madhukar Pappireddy
Rex-BC Chen
Manish V Badarkhe
Pali Rohár
Mark Dykes
Jacky Bai
Zelalem
Olivier Deprez
Davidson K
laurenw-arm
Aditya Angadi
Yidi Lin
Mikael Olsson
Konstantin Porotchkin
Andre Przywara
Ying-Chun Liu (PaulLiu)
Yann Gautier
David Horstmann
Luka Kovacic
Biju Das
Marek Behún
Arunachalam Ganapathy
Varun Wadekar
Yann Gautier
Marcin Wojtas
Chandni Cherukuri
Jan Kiszka
Masahisa Kojima
Julius Werner
Saurabh Gorecha
Mark Dykes
Sandrine Bailleux
Nina Wu
Grzegorz Jaszczyk
Vijayenthiran Subramaniam
Alexei Fedorov
Masahiro Yamada