Update supported models list according to changes for v2.7 release in
ci/tf-a-ci-scripts repository:
* general FVP model update: 5c54251
* CSS model update: 3bd12fb
Signed-off-by: Maksims Svecovs <maksims.svecovs@arm.com>
Change-Id: I38c2ef2991b23873821c7e34ad2900b9ad023c4b
This patch adds SPP/EMU platform support for Xilinx Versal and
also updating the documentation.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: Ibdadec4d00cd33ea32332299e7a00de31dc9d60b
Update the make command with the RESET_TO_BL31=1 addition.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I46cc81abb539773706348464b3061d20d94522e9
TB_FW_CONFIG DT no longer contains the address of HW_CONFIG; it has
been moved to the FW_CONFIG DT since the introduction of FCONF.
Hence updated the documentation accordingly.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I37b68502a89dbd521acd99f2cb3aeb0bd36a04e0
Update document for nxp-layerscape to add ls1088a SoC and ls1088ardb,
update maintainer of ls1088a platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Ic7fdc7b1bbf22e50646991093366a88ee523ffe3
* changes:
feat(stm32mp1): select platform compilation either by flag or DT
feat(stm32mp1-fdts): add support for STM32MP13 DK board
feat(stm32mp1-fdts): add DDR support for STM32MP13
feat(stm32mp1-fdts): add st-io_policies node for STM32MP13
feat(stm32mp1): updates for STM32MP13 device tree compilation
feat(stm32mp1-fdts): add DT files for STM32MP13
feat(dt-bindings): add TZC400 bindings for STM32MP13
feat(stm32mp1): add "Boot mode" management for STM32MP13
feat(stm32mp1): manage HSLV on STM32MP13
feat(stm32mp1): add sdmmc compatible in platform define
feat(st-sdmmc2): allow compatible to be defined in platform code
feat(stm32mp1): update IO compensation on STM32MP13
feat(stm32mp1): call pmic_voltages_init() in platform init
feat(st-pmic): add pmic_voltages_init() function
feat(stm32mp1): update CFG0 OTP for STM32MP13
feat(stm32mp1): usb descriptor update for STM32MP13
feat(st-clock): add clock driver for STM32MP13
feat(dt-bindings): add bindings for STM32MP13
feat(stm32mp1): get CPU info from SYSCFG on STM32MP13
feat(stm32mp1): use only one filter for TZC400 on STM32MP13
feat(stm32mp1): add a second fixed regulator
feat(stm32mp1): adaptations for STM32MP13 image header
feat(stm32mp1): update boot API for header v2.0
feat(stm32mp1): update IP addresses for STM32MP13
feat(stm32mp1): add part numbers for STM32MP13
feat(stm32mp1): chip rev. Z is 0x1001 on STM32MP13
feat(stm32mp1): update BACKUP_BOOT_MODE for STM32MP13
feat(stm32mp1): stm32mp_is_single_core() for STM32MP13
feat(stm32mp1): remove unsupported features on STM32MP13
feat(stm32mp1): update memory mapping for STM32MP13
feat(stm32mp1): introduce new flag for STM32MP13
feat(st): update stm32image tool for header v2
STM32MP13 is a variant of STM32MP1, with a single Cortex-A7, and no
Cortex-M4.
There is only one DDR port.
SP_min is not supported, only OP-TEE can be used as monitor.
STM32MP13 uses the header v2.0 format for stm32image generation
for BL2.
Change-Id: Ie5b0e3230c5e064fe96f3561fc5b3208914dea53
Signed-off-by: Yann Gautier <yann.gautier@st.com>
DEBUG mode can be enabled without any issue for Armada 37xx and also for
other A7K/A8K/CN913x. There is no incompatibility with Xmodem protocol
like it was written before, because Armada 37xx UART images do not print
anything on UART during image transfer and A7K/A8K/CN913x BLE image
automatically turn off debugging output when booting over UART. Looks
like this incorrect information is some relict from the past.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I85adc3c21036656b4620c4692e04330cad11ea2f
Add the possibility to configure console UART baudrate, it can be passed
as a command line parameter with STM32MP_UART_BAUDRATE. The default value
remains 115200.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I000df70c10b2b4dac1449556596f9820c36cf243
* changes:
docs(layerscape): add ls1046a soc and board support
feat(ls1046aqds): add board ls1046aqds support
feat(ls1046afrwy): add ls1046afrwy board support
feat(ls1046ardb): add ls1046ardb board support
feat(ls1046a): add new SoC platform ls1046a
fix(nxp-tools): fix tool location path for byte_swape
fix(nxp-qspi): fix include path for QSPI driver
build(changelog): add new scopes for NXP layerscape platforms
On Debian systems it is possible to use system-wide Crypto++ library.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ib01d9376776b8afcb1ca46c16076e28c3d2e581d
Update document for nxp-layerscape to add ls1046a SoC and ls1046ardb,
ls1046afrwy board support.
Also update maintainer of ls1046a platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I522f978bc93aa8d1f1d60fa8efef392b7d854df7
Armada 3720 BootROM searches for GPT partition with partition type GUID
6828311A-BA55-42A4-BCDE-A89BB5EDECAE and completely ignores GPT
partition name. It does not check for "MARVELL BOOT PARTITION".
This fact is incorrectly documented even in official Marvell Armada 3700
Functional Specification.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I35279f39de2d12148fc16f2730a9a074dc0b58eb
diphda platform is now being renamed to corstone1000.
These changes are to replace all the instances and traces
of diphda corstone1000.
Change-Id: I330f3a112d232b99b4721b6bf0236253b068dbba
Signed-off-by: Arpita S.K <Arpita.S.K@arm.com>
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
The Qualcomm Snapdragon 410 is Qualcomm's first 64-bit SoC, released
in 2014 with four ARM Cortex-A53 cores. There are differents variants
(MSM8916, APQ8016(E), ...) that are all very similar. A popular device
based on APQ8016E is the DragonBoard 410c single-board computer,
but the SoC is also used in various mid-range smartphones/tablets.
This commit adds documentation for a minimal, community-maintained port
of TF-A/BL31 for MSM8916. The actual platform port is added in the
following four separate small commits to simplify the review process.
The code is primarily based on the information from the public
Snapdragon 410E Technical Reference Manual [1], combined with a lot of
trial and error to actually make it work.
Note that this port is a pure community effort without any
commercial interests and is not related to Qualcomm in any way.
The main motivation for this port is to have a minimal, updatable
firmware since this old chip does not receive many updates anymore from
Qualcomm. It works quite well for many use cases so I am willing to
maintain it as a "code owner". I have also added Nikita Travkin as
second code owner to help with reviews.
The main limitation so far is the lack of memory protection for TF-A.
This is similar to the ports for the Raspberry Pi but in this case not
a lack of hardware support but rather a lack of documentation. However,
this does not limit the usefulness of the port when used as a minimal
PSCI implementation.
[1]: https://developer.qualcomm.com/download/sd410/snapdragon-410e-technical-reference-manual.pdf
Change-Id: I676adf86061638cfc2f3ae8615470d145e84f172
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Update document for nxp-layerscape to add ls1043a SoC and ls1043ardb
board support.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I8442daf08a0f7c1ba982a3ed1d0ad24c4c420185
Remove old implementation for Layerscape ls1043a platform, and
will added it back with unified software architecture of all
Layerscape platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: If038c19ab04d70050ec8e6ab2097b1c4f8324e87
Our list of possible Allwinner build targets was missing the newly
introduced R329 support. Fix that by adding a table with maps the SoC
names to the build target names.
Also add some explanation about the recently introduced PSCI power
management providers.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Icf5e304562c3082552bf08d7b26904caf9074936
Document the newly introduced SUNXI_SETUP_REGULATORS build option, that
allows to disable PMIC regulator setup at build time.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Ie5fb0b7220426b67cfffc95df4cabb31a6ec174a
Update supported models list according to changes for v2.6 release in
ci/tf-a-ci-scripts repository:
* general FVP model update: d10c1b9
* gic600 update: aa2548a
* CSS prebults model update: f1c3a4f
Signed-off-by: Maksims Svecovs <maksims.svecovs@arm.com>
Change-Id: If2841f05238facb3cace7d5c8a78083d54f35e27
When building a FIP with OP-TEE as BL32 on STM32MP1, AARCH32_SP=optee
has to be added to the make command.
Change-Id: I900c01957fe4ed7ed13ca955edd91ed1c5c5c4fa
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add support for Globalscale MOCHAbin board.
Its based on Armada 7040 SoC and ships in multiple DRAM options:
* 2GB DDR4 (1CS)
* 4GB DDR4 (1CS)
* 8GB DDR4 (2CS)
Since it ships in multiple DRAM configurations, an
Armada 3k style DDR_TOPOLOGY variable is added.
Currently, this only has effect on the MOCHAbin, but
I expect more boards with multiple DRAM sizes to be
supported.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Change-Id: I8a1ec9268fed34f6a81c5cbf1e891f638d461305
* changes:
feat(docs/nxp/layerscape): add ls1028a soc and board support
feat(plat/nxp/ls1028ardb): add ls1028ardb board support
feat(plat/nxp/ls1028a): add ls1028a soc support
feat(plat/nxp/common): define default SD buffer
feat(driver/nxp/xspi): add MT35XU02G flash info
feat(plat/nxp/common): add SecMon register definition for ch_3_2
feat(driver/nxp/dcfg): define RSTCR_RESET_REQ
feat(plat/nxp/common/psci): define CPUECTLR_TIMER_2TICKS
feat(plat/nxp/common): define default PSCI features if not defined
feat(plat/nxp/common): define common macro for ARM registers
feat(plat/nxp/common): add CCI and EPU address definition
Trusted Services had removed secure storage and added two new
trusted services - Protected Storage and Internal Trusted Storage.
Hence we are removing secure storage and adding support for the
internal trusted storage.
And enable external SP images in BL2 config for TC, so that
we do not have to modify this file whenever the list of SPs
changes. It is already implemented for fvp in the below commit.
commit 33993a3737
Author: Balint Dobszay <balint.dobszay@arm.com>
Date: Fri Mar 26 15:19:11 2021 +0100
feat(fvp): enable external SP images in BL2 config
Change-Id: I3e0a0973df3644413ca5c3a32f36d44c8efd49c7
Signed-off-by: Davidson K <davidson.kumaresan@arm.com>
Describe the boot using FIP, and how to compile it.
The STM32IMAGE boot chain is still available but it is not recommended.
Update the build command lines, for FIP.
The memory mapping is also updated.
Change-Id: I2b1e0df5500b6213d33dc558b0e0da38340a4d79
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Currently the list of SP UUIDs loaded by BL2 is hardcoded in the DT.
This is a problem when building a system with other SPs (e.g. from
Trusted Services). This commit implements a workaround to enable adding
SP UUIDs to the list at build time.
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Change-Id: Iff85d3778596d23d777dec458f131bd7a8647031
Addition of documents for platforms based on
NXP SoC LX2160A.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I39ac5a9eb0b668d26301a0a24a1e6bf87f245f02
This patch adds the necessary files to support
the SolidRun CN913X CEx7 Evaluation Board.
Because the DRAM connectivity and SerDes settings
is shared with the CN913X DB - reuse relevant
board-specific files.
Change-Id: I75a4554a4373953ca3fdf3b04c4a29c2c4f8ea80
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
It was enabled in commit 3c7dcdac5c ("marvell/a3700: Prevent SError
accessing PCIe link while it is down") with a workaround for a bug found
in U-Boot and Linux kernel driver pci-aardvark.c (PCIe controller driver
for Armada 37xx SoC) which results in SError interrupt caused by AXI
SLVERR on external access (syndrome 0xbf000002) and immediate kernel
panic.
Now when proper patches are in both U-Boot and Linux kernel projects,
this workaround in TF-A should not have to be enabled by default
anymore as it has unwanted side effects like propagating all external
aborts, including non-fatal/correctable into EL3 and making them as
fatal which cause immediate abort.
Add documentation for HANDLE_EA_EL3_FIRST build option into Marvell
Armada build section.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ic92b65bf9923505ab682830afb66c2f6cec70491
Add missing documentation for MSS_SUPPORT and SCP_BL2 build options used
on Marvell platforms.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I852f60569a9a49269ae296c56cc83eb438528bee
The Tegra132 platforms have reached their end of life and are
no longer used in the field. Internally and externally, all
known programs have removed support for this legacy platform.
This change removes this platform from the Tegra tree as a result.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I72edb689293e23b63290cdcaef60468b90687a5a
This renames tc0 platform folder and files to tc, and introduces
TARGET_PLATFORM variable to account for the differences between
TC0 and TC1.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: I5b4a83f3453afd12542267091b3edab4c139c5cd
Update documentation and group platform specific build options into
their own subsections.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I05927d8abf9f811493c49b856f06329220e7d8bb
Maksims Svecovs
Venkatesh Yadav Abbarapu
Manish Pandey
Manish V Badarkhe
Jiafei Pan
Sebastien Pasdeloup
Pali Rohár
Yann Gautier
Yann Gautier
Madhukar Pappireddy
Vishnu Banavath
Ying-Chun Liu (PaulLiu)
Stephan Gerhold
Andre Przywara
Rex-BC Chen
Robert Marko
laurenw-arm
Joanna Farley
Saurabh Gorecha
Davidson K
Mark Dykes
Balint Dobszay
Pankaj Gupta
Marcin Wojtas
Varun Wadekar
Usama Arif