This patch reassigns the crash console on Juno and FVP to use the runtime
BL3-1 console. The crash console is changed to SoC UART0 (UART2) from the
previous FPGA UART0 (UART0) on Juno. In FVP, it is changed from UART0 to
UART1.
FixesARM-software/tf-issues#256
Change-Id: I7df54f86ca00ec2652c27261dd66a94c12610816
This patch replaces the usage of the GIC private driver in Juno with
the generic ARM GIC driver. The private driver is no longer necessary
and has been removed from the Juno port.
FixesARM-software/tf-issues#253
Change-Id: I6aaabc252e5e6fb5fcf44ab6d0febd9b38791056
This patch optimizes the Cortex-A57 cluster power down sequence by not
flushing the Level1 data cache. The L1 data cache and the L2 unified
cache are inclusive. A flush of the L2 by set/way flushes any dirty
lines from the L1 as well. This is a known safe deviation from the
Cortex-A57 TRM defined power down sequence. This optimization can be
enabled by the platform through the 'SKIP_A57_L1_FLUSH_PWR_DWN' build
flag. Each Cortex-A57 based platform must make its own decision on
whether to use the optimization.
This patch also renames the cpu-errata-workarounds.md to
cpu-specific-build-macros.md as this facilitates documentation
of both CPU Specific errata and CPU Specific Optimization
build macros.
Change-Id: I299b9fe79e9a7e08e8a0dffb7d345f9a00a71480
This patch deprecates the build option to relocate the shared data
into Trusted DRAM in FVP. After this change, shared data is always
located at the base of Trusted SRAM. This reduces the complexity
of the memory map and the number of combinations in the build
options.
FixesARM-software/tf-issues#257
Change-Id: I68426472567b9d8c6d22d8884cb816f6b61bcbd3
This patch adds support on the Juno platform for entering a wfi in
response to a PSCI CPU_SUSPEND call where the state type is a
standby state.
Change-Id: I0a102dee1f8d2ad936c63ad1d1d3ad001a4a4768
This patch configures the TrustZone Controller in Juno to split
the 2GB DDR-DRAM memory at 0x80000000 into Secure and Non-Secure
regions:
- Secure DDR-DRAM: top 16 MB, except for the last 2 MB which are
used by the SCP for DDR retraining
- Non-Secure DDR-DRAM: remaining DRAM starting at base address
Build option PLAT_TSP_LOCATION selects the location of the secure
payload (BL3-2):
- 'tsram' : Trusted SRAM (default option)
- 'dram' : Secure region in the DDR-DRAM (set by the TrustZone
controller)
The MMU memory map has been updated to give BL2 permission to load
BL3-2 into the DDR-DRAM secure region.
FixesARM-software/tf-issues#233
Change-Id: I6843fc32ef90aadd3ea6ac4c7f314f8ecbd5d07b
This patch replaces direct accesses to the TZC-400 registers by the
appropiate calls to the generic driver available in the Trusted
Firmware in order to initialize the TrustZone Controller.
Functions related to the initialization of the secure memory,
like the TZC-400 configuration, have been moved to a new file
'plat_security.c'. This reorganization makes easier to set up
the secure memory from any BL stage.
TZC-400 initialization has been moved from BL1 to BL2 because BL1
does not access the non-secure memory. It is BL2's responsibility
to enable and configure the TZC-400 before loading the next BL
images.
In Juno, BL3-0 initializes some of the platform peripherals, like
the DDR controller. Thus, BL3-0 must be loaded before configuring
the TrustZone Controller. As a consequence, the IO layer
initialization has been moved to early platform initialization.
FixesARM-software/tf-issues#234
Change-Id: I83dde778f937ac8d2996f7377e871a2e77d9490e
This patch uses the IMAGE_BL<x> constants to create translation tables specific
to a boot loader stage. This allows each stage to create mappings only for areas
in the memory map that it needs.
FixesARM-software/tf-issues#209
Change-Id: Ie4861407ddf9317f0fb890fc7575eaa88d0de51c
This patch avoids the problem of crash reporting mechanism accessing
global data in BSS by 'plat_print_gic_regs' for FVP platforms. Earlier
it depended on the global 'plat_config' object for the GIC Base address
in FVP platforms which would have caused exception if it were accessed
before the BSS was initialized. It is now fixed by dynamically
querying the V2M_SYS_ID to find the FVP model type and accordingly
selecting the appropriate GIC Base address.
This patch also fixes the 'plat_print_gic_regs' to use the correct GIC
Distributor base address for printing GICD_IS_PENDR register values
for both Juno and FVP platforms.
FixesARM-Software/tf-issues#236
Change-Id: I545c7b908b3111419bf27db0575ce86acf86784b
This patch gathers miscellaneous minor fixes to the documentation, and comments
in the source code.
Change-Id: I631e3dda5abafa2d90f464edaee069a1e58b751b
Co-Authored-By: Soby Mathew <soby.mathew@arm.com>
Co-Authored-By: Dan Handley <dan.handley@arm.com>
This patch changes the UART port assignment for various BL stages
so as to make it consistent on the platform ports. The BL1, BL2 and
BL3-1 now uses UART0 on the FVP port and SoC UART0 on the Juno port.
The BL3-2 uses UART2 on the FVP port and FPGA UART0 on the Juno
port.
This provides an interim fix to ARM-software/tf-issues#220 until
support is added for changing the UART port for a BL image between
cold boot and runtime.
Change-Id: Iae5faea90be3d59e41e597b34a902f93e737505a
This patch removes the PRIMARY_CPU definition hardcoded in the
Juno port. Instead, the primary CPU is obtained at runtime by
reading the SCC General Purpose Register 1 (GPR_1), whose value
is copied by the SCP into shared memory during the boot process.
Change-Id: I3981daa92eb7142250712274cf7f655b219837f5
This patch adds the Juno platform specific handlers for PSCI
SYSTEM_OFF and SYSTEM_RESET operations.
Change-Id: Ie389adead533ec2314af44d721b4d0f306147c7d
This patch implements the TSP on Juno. It executes from on-chip Trusted
SRAM.
Also, the other bootloader images (i.e. BL1 R/W, BL2 and BL3-1) have
been moved around. The reason is, although there was enough space
overall to store the TSP in SRAM, there was no contiguous free chunk
of SRAM big enough to hold it.
This patch keeps the overall memory layout (i.e. keeping BL1 R/W at
the bottom, BL2 at the top and BL3-1 in between) but moves the base
addresses of all the bootloader images in such a way that:
- memory fragmentation is reduced enough to fit BL3-2 in;
- new base addresses are suitable for release builds as well as debug
ones;
- each image has a few extra kilobytes for future growth.
BL3-1 and BL3-2 are the images which received the biggest allocations
since they will most probably grow the most.
This patch also adds instruction synchronization barriers around the code which
handles the timer interrupt in the TSP. This ensures that the interrupt is not
acknowledged after or EOIed before it is deactivated at the peripheral.
Change-Id: I1c5b51858700027ee283ac85d18e06863a27c72e
This patch adds support for PSCI CPU_OFF and CPU_SUSPEND APIs to the Juno port
of the ARM Trusted Firmware. The maximum affinity level that can be suspended is
the cluster level (affinity level 1). Support for suspending the system level is
not present.
Change-Id: Ie2c9da0acd7d1b0d5ac64940cdf40347153e52c8
This patch adds the initial port of the ARM Trusted Firmware on the Juno
development platform. This port does not support a BL3-2 image or any PSCI APIs
apart from PSCI_VERSION and PSCI_CPU_ON. It enables workarounds for selected
Cortex-A57 (#806969 & #813420) errata and implements the workaround for a Juno
platform errata (Defect id 831273).
Change-Id: Ib3d92df3af53820cfbb2977582ed0d7abf6ef893
This patch adds CPU core and cluster power down sequences to the CPU specific
operations framework introduced in a earlier patch. Cortex-A53, Cortex-A57 and
generic AEM sequences have been added. The latter is suitable for the
Foundation and Base AEM FVPs. A pointer to each CPU's operations structure is
saved in the per-cpu data so that it can be easily accessed during power down
seqeunces.
An optional platform API has been introduced to allow a platform to disable the
Accelerator Coherency Port (ACP) during a cluster power down sequence. The weak
definition of this function (plat_disable_acp()) does not take any action. It
should be overriden with a strong definition if the ACP is present on a
platform.
Change-Id: I8d09bd40d2f528a28d2d3f19b77101178778685d
This patch adds an optional platform API (plat_reset_handler) which allows the
platform to perform any actions immediately after a cold or warm reset
e.g. implement errata workarounds. The function is called with MMU and caches
turned off. This API is weakly defined and does nothing by default but can be
overriden by a platform with a strong definition.
Change-Id: Ib0acdccbd24bc756528a8bd647df21e8d59707ff
This patch introduces a framework which will allow CPUs to perform
implementation defined actions after a CPU reset, during a CPU or cluster power
down, and when a crash occurs. CPU specific reset handlers have been implemented
in this patch. Other handlers will be implemented in subsequent patches.
Also moved cpu_helpers.S to the new directory lib/cpus/aarch64/.
Change-Id: I1ca1bade4d101d11a898fb30fea2669f9b37b956
This patch provides a workaround for the ASM_ASSERT label issue
and also reworks the use of labels in assembly macros.
If the caller of the ASM_ASSERT macro happened to use the
label '1' to jump past the ASM_ASSERT macro, it would not have
worked since the ASM_ASSERT macro internally used the same label.
Hence, as a workaround, this patch makes the label a high
number in the expectation that the caller will never use it.
Also updated the other assembly macros using numerical labels to
named lables.
Change-Id: Iec892359db84f2391ad2a83a92141c4d7049776a
This patch reworks FVP port's power management implementation to perform
platform actions only when the platform exported hook is invoked for the highest
affinity level to enter/exit the OFF state.
For example, during a CPU_OFF operation, fvp_affinst_off() is called twice: for
affinity level 0 and affinity level 1 (in that order). CPU specific operations
are deferred until the next invocation if it is determined through a call to
psci_get_max_phys_off_afflvl() that this is CPU is the last in the cluster.
Similarly, during power up if the CPU is the first in the cluster, both CPU and
cluster specific operations are performed when fvp_affinst_on_finish() is
invoked for affinity level 1. Earlier, they were done across the two invocations
of the handler.
Change-Id: I4288ed3ba1385db36a69cc2e598deb219f209b8a
This patch adds support for SYSTEM_OFF and SYSTEM_RESET PSCI
operations. A platform should export handlers to complete the
requested operation. The FVP port exports fvp_system_off() and
fvp_system_reset() as an example.
If the SPD provides a power management hook for system off and
system reset, then the SPD is notified about the corresponding
operation so it can do some bookkeeping. The TSPD exports
tspd_system_off() and tspd_system_reset() for that purpose.
Versatile Express shutdown and reset methods have been removed
from the FDT as new PSCI sys_poweroff and sys_reset services
have been added. For those kernels that do not support yet these
PSCI services (i.e. GICv3 kernel), the original dtsi files have
been renamed to *-no_psci.dtsi.
FixesARM-software/tf-issues#218
Change-Id: Ic8a3bf801db979099ab7029162af041c4e8330c8
* Move TSP platform porting functions to new file:
include/bl32/tsp/platform_tsp.h.
* Create new TSP_IRQ_SEC_PHY_TIMER definition for use by the generic
TSP interrupt handling code, instead of depending on the FVP
specific definition IRQ_SEC_PHY_TIMER.
* Rename TSP platform porting functions from bl32_* to tsp_*, and
definitions from BL32_* to TSP_*.
* Update generic TSP code to use new platform porting function names
and definitions.
* Update FVP port accordingly and move all TSP source files to:
plat/fvp/tsp/.
* Update porting guide with above changes.
Note: THIS CHANGE REQUIRES ALL PLATFORM PORTS OF THE TSP TO
BE UPDATED
FixesARM-software/tf-issues#167
Change-Id: Ic0ff8caf72aebb378d378193d2f017599fc6b78f
The TZC-400 driver previously allowed the possibility of multiple
controller instances to be present in the same executable. This
was unnecessary since there will only ever be one instance.
This change simplifies the tzc_init() function to only take the
base address argument needed by implementation, conforming to the
driver initialization model of other drivers. It also hides some
of the implementation details that were previously exposed by the
API.
The FVP port has been updated accordingly.
THIS CHANGE REQUIRES ALL PLATFORM PORTS THAT USE THE TZC-400
DRIVER TO BE UPDATED
FixesARM-software/tf-issues#181
Change-Id: I7b721edf947064989958d8f457d6462d92e742c8
Move the remaining IO storage source file (io_storage.c) from the
lib to the drivers directory. This requires that platform ports
explicitly add this file to the list of source files.
Also move the IO header files to a new sub-directory, include/io.
Change-Id: I862b1252a796b3bcac0d93e50b11e7fb2ded93d6
The intent of io_init() was to allow platform ports to provide
a data object (io_plat_data_t) to the IO storage framework to
allocate into. The abstraction was incomplete because io_plat_data_t
uses a platform defined constant and the IO storage framework
internally allocates other arrays using platform defined constants.
This change simplifies the implementation by instantiating the
supporting objects in the IO storage framework itself. There is now
no need for the platform to call io_init().
The FVP port has been updated accordingly.
THIS CHANGE REQUIRES ALL PLATFORM PORTS THAT USE THE IO STORAGE
FRAMEWORK TO BE UDPATED.
Change-Id: Ib48ac334de9e538064734334c773f8b43df3a7dc
* Create cci_init() function in CCI-400 driver to allow platform
to provide arguments needed by the driver (i.e. base address
and cluster indices for the ACE slave interfaces).
* Rename cci_(en|dis)able_coherency to
cci_(en|dis)able_cluster_coherency to make it clear that
the driver only enables/disables the coherency of CPU
clusters and not other devices connected to the CCI-400.
* Update FVP port to use new cci_init() function and remove
unnecessary CCI defintions from platform_def.h. Also rename
fvp_cci_setup() to fvp_cci_enable() to more clearly
differentiate between CCI initialization and enabling.
THIS CHANGE REQUIRES PLATFORM PORTS THAT USE THE CCI-400 DRIVER
TO BE UPDATED
FixesARM-software/tf-issues#168
Change-Id: I1946a51409b91217b92285b6375082619f607fec
This patch groups the current contents of the Trusted DRAM region at
address 0x00_0600_0000 (entrypoint mailboxes and BL3-1 parameters) in
a single shared memory area that may be allocated to Trusted SRAM
(default) or Trusted DRAM at build time by setting the
FVP_SHARED_DATA_LOCATION make variable. The size of this shared
memory is 4096 bytes.
The combination 'Shared data in Trusted SRAM + TSP in Trusted DRAM'
is not currently supported due to restrictions in the maximum number
of mmu tables that can be created.
Documentation has been updated to reflect these changes.
FixesARM-software/tf-issues#100
Change-Id: I26ff04d33ce4cacf8d770d1a1e24132b4fc53ff0
Fix the following issues with the console log output:
* Make sure the welcome string is the first thing in the log output
(during normal boot).
* Prefix each message with the BL image name so it's clear which
BL the output is coming from.
* Ensure all output is wrapped in one of the log output macros so it can
be easily compiled out if necessary. Change some of the INFO() messages
to VERBOSE(), especially in the TSP.
* Create some extra NOTICE() and INFO() messages during cold boot.
* Remove all usage of \r in log output.
FixesARM-software/tf-issues#231
Change-Id: Ib24f7acb36ce64bbba549f204b9cde2dbb46c8a3
Secure ROM at address 0x0000_0000 is defined as FVP_TRUSTED_ROM
Secure RAM at address 0x0400_0000 is defined as FVP_TRUSTED_SRAM
Secure RAM at address 0x0600_0000 is defined as FVP_TRUSTED_DRAM
BLn_BASE and BLn_LIMIT definitions have been updated and are based on
these new memory regions.
The available memory for each bootloader in the linker script is
defined by BLn_BASE and BLn_LIMIT, instead of the complete memory
region.
TZROM_BASE/SIZE and TZRAM_BASE/SIZE are no longer required as part of
the platform porting.
FVP common definitions are defined in fvp_def.h while platform_def.h
contains exclusively (with a few exceptions) the definitions that are
mandatory in the porting guide. Therefore, platform_def.h now includes
fvp_def.h instead of the other way around.
Porting guide has been updated to reflect these changes.
Change-Id: I39a6088eb611fc4a347db0db4b8f1f0417dbab05
This patch separates the stack size for each BL stage and
reduces it after stack usage analysis was done.
FixesARM-software/tf-issues#200
Change-Id: I8edc6de2551b0a6788761d121937692b2149bb29
There is no mechanism which allows the TSPD to specify what SPSR to
use when entering BL3-2 instead of BL3-3. This patch divides the
responsibility between tspd_setup() and tspd_init() for initializing
the TSPD and TSP to support the alternate BL3-2 initialization flow
where BL3-1 handsover control to BL3-2 instead of BL3-3.
SPSR generated by TSPD for TSP is preserved due the new division of
labour which fixes#174.
This patch also moves the cpu_context initialization code from
tspd_setup() to tspd_init() immediately before entering the TSP.
Instead tspd_setup() updates the BL3-2 entrypoint info structure
with the state required for initializing the TSP later.
Fixes ARM-software/TF-issues#174
Change-Id: Ida0a8a48d466c71d5b07b8c7f2af169b73f96940
The purpose of platform_is_primary_cpu() is to determine after reset
(BL1 or BL3-1 with reset handler) if the current CPU must follow the
cold boot path (primary CPU), or wait in a safe state (secondary CPU)
until the primary CPU has finished the system initialization.
This patch removes redundant calls to platform_is_primary_cpu() in
subsequent bootloader entrypoints since the reset handler already
guarantees that code is executed exclusively on the primary CPU.
Additionally, this patch removes the weak definition of
platform_is_primary_cpu(), so the implementation of this function
becomes mandatory. Removing the weak symbol avoids other
bootloaders accidentally picking up an invalid definition in case the
porting layer makes the real function available only to BL1.
The define PRIMARY_CPU is no longer mandatory in the platform porting
because platform_is_primary_cpu() hides the implementation details
(for instance, there may be platforms that report the primary CPU in
a system register). The primary CPU definition in FVP has been moved
to fvp_def.h.
The porting guide has been updated accordingly.
FixesARM-software/tf-issues#219
Change-Id: If675a1de8e8d25122b7fef147cb238d939f90b5e
Assert a valid security state using the macro sec_state_is_valid().
Replace assert() with panic() in those cases that might arise
because of runtime errors and not programming errors.
Replace panic() with assert() in those cases that might arise
because of programming errors.
FixesARM-software/tf-issues#96
Change-Id: I51e9ef0439fd5ff5e0edfef49050b69804bf14d5
This patch adds the CPUECTLR_EL1 register and the CCI Snoop Control
register to the list of registers being reported when an unhandled
exception occurs.
Change-Id: I2d997f2d6ef3d7fa1fad5efe3364dc9058f9f22c
This patch reworks the crash reporting mechanism to further
optimise the stack and code size. The reporting makes use
of assembly console functions to avoid calling C Runtime
to report the CPU state. The crash buffer requirement is
reduced to 64 bytes with this implementation. The crash
buffer is now part of per-cpu data which makes retrieving
the crash buffer trivial.
Also now panic() will use crash reporting if
invoked from BL3-1.
FixesARM-software/tf-issues#199
Change-Id: I79d27a4524583d723483165dc40801f45e627da5
This patch introduces platform APIs to initialise and
print a character on a designated crash console.
For the FVP platform, PL011_UART0 is the designated
crash console. The platform porting guide is also updated
to document the new APIs.
Change-Id: I5e97d8762082e0c88c8c9bbb479353eac8f11a66
This patch adds baud rate and UART clock frequency as parameters
to the pl011 driver api console_init(). This allows each platform
to specify UART clock and baud rate according to their specific
hardware implementation.
FixesARM-software/tf-issues#215
Change-Id: Id13eef70a1c530e709b34dd1e6eb84db0797ced2
This patch replaces the pl011 console family of functions
with their equivalents defined in assembly. The baud rate is
defined by the PL011_BAUDRATE macro and IBRD and FBRD values
for pl011 are computed statically. This patch will enable
us to invoke the console functions without the C Runtime Stack.
Change-Id: Ic3f7b7370ded38bf9020bf746b362081b76642c7
This patch removes the allocation of memory for coherent stacks, associated
accessor function and some dead code which called the accessor function. It also
updates the porting guide to remove the concept and the motivation behind using
stacks allocated in coherent memory.
FixesARM-software/tf-issues#198
Change-Id: I00ff9a04f693a03df3627ba39727e3497263fc38
This patch adds a 'flags' parameter to each exception level specific function
responsible for enabling the MMU. At present only a single flag which indicates
whether the data cache should also be enabled is implemented. Subsequent patches
will use this flag when enabling the MMU in the warm boot paths.
Change-Id: I0eafae1e678c9ecc604e680851093f1680e9cefa
The ARM_GIC_ARCH build option was supposed to default to 2 on all
platforms. However, the default value was set in the FVP makefile
so for all other platforms it wasn't even defined.
This patch moves the default value to the main Makefile. The platform
port can then override it if needed.
Change-Id: I8e2da1cce7ffa3ed18814bbdcbcf2578101f18a6
platform_get_entrypoint() did not consider that a wakeup due to
System Reset Pin (by reading the power controller's PSYSR) requires
a cold boot. As a result, the code would execute the warm boot path
and eventually panic because entrypoint mailboxes are empty.
This patch ensures that the following wake-up reasons result in cold
boot:
- Cold Power-on
- System Reset Pin (includes reset by software)
FixesARM-software/tf-issues#217
Change-Id: I65ae0a0f7a46548b575900a5aac107d352b0e2cd
This patch re-organizes the memory layout on FVP as to give the
BL3-2 image as much memory as possible.
Considering these two facts:
- not all images need to live in memory at the same time. Once
in BL3-1, the memory used by BL1 and BL2 can be reclaimed.
- when BL2 loads the BL3-1 and BL3-2 images, it only considers the
PROGBITS sections of those 2 images. The memory occupied by the
NOBITS sections will be touched only at execution of the BL3-x
images;
Then it is possible to choose the different base addresses such that
the NOBITS sections of BL3-1 and BL3-2 overlay BL1 and BL2.
On FVP we choose to put:
- BL1 and BL3-1 at the top of the Trusted RAM, with BL3-1 NOBITS
sections overlaying BL1;
- BL3-2 at the bottom of the Trusted RAM, with its NOBITS sections
overlaying BL2;
This is illustrated by the following diagram:
0x0404_0000 ------------ ------------------
| BL1 | <= | BL3-1 NOBITS |
------------ <= ------------------
| | <= | BL3-1 PROGBITS |
------------ ------------------
| BL2 | <= | BL3-2 NOBITS |
------------ <= ------------------
| | <= | BL3-2 PROGBITS |
0x0400_0000 ------------ ------------------
New platform-specific constants have been introduced to easily check
at link time that BL3-1 and BL3-2 PROGBITS sections don't overwrite
BL1 and BL2. These are optional and the platform code is free to define
them or not. If not defined, the linker won't attempt to check
image overlaying.
FixesARM-software/tf-issues#117
Change-Id: I5981d1c3d66ee70eaac8bd052630c9ac6dd8b042
Refactor the FVP gic code in plat/fvp/fvp_gic.c to be a generic ARM
GIC driver in drivers/arm/gic/arm_gic.c. Provide the platform
specific inputs in the arm_gic_setup() function so that the driver
has no explicit dependency on platform code.
Provide weak implementations of the platform interrupt controller
API in a new file, plat/common/plat_gic.c. These simply call through
to the ARM GIC driver.
Move the only remaining FVP GIC function, fvp_gic_init() to
plat/fvp/aarch64/fvp_common.c and remove plat/fvp/fvp_gic.c
FixesARM-software/tf-issues#182
Change-Id: Iea82fe095fad62dd33ba9efbddd48c57717edd21
Changed the fvp_config array in fvp_common.c into a struct and
moved into a new optional common platform header,
include/plat/common/plat_config.h. Removed the config definitions
in fvp_def.h and updated all references to the platform config.
This makes the interface to the platform config cleaner and uses
a little less RAM.
FixesARM-software/tf-issues#180
Change-Id: I58dd7b3c150f24f7ee230a26fd57c827853ba803
There was already a rudimentary mechanism to detect whether BL1
R/W data was loaded at the top or bottom of memory. Basically,
- either BL1 was loaded at the very end of the trusted RAM
- in all other cases BL1 was considered sitting at the bottom of
the memory and the memory usage structure was updated accordingly,
potentially resulting in critical memory waste.
For instance, if BL1 R/W base address was set to
(TZRAM_END - 4096 - bl1_size), it would virtually occupy the whole
memory.
This patch improves the mechanism to detect the location of BL1
to avoid such scenarios.
Change-Id: I224a9edf0fe8d34208545d84b28b63f2bb830d03
This concept is no longer required since we now support loading of
images at fixed addresses only.
The image loader now automatically detects the position of the image
inside the current memory layout and updates the layout such that
memory fragmentation is minimised.
The 'attr' field of the meminfo data structure, which used to hold
the bottom/top loading information, has been removed. Also the 'next'
field has been removed as it wasn't used anywhere.
The 'init_bl2_mem_layout()' function has been moved out of common
code and put in BL1-specific code. It has also been renamed into
'bl1_init_bl2_mem_layout'.
FixesARM-software/tf-issues#109
Change-Id: I3f54642ce7b763d5ee3b047ad0ab59eabbcf916d
The code in the FVP port which checks the platform type and
revision information in the SYS_ID register strictly supported
only the first revision of the Base and Foundation FVPs.
The current check also does not reflect the fact that the
board revision field is 'local' to the board type (HBI field).
Support for a new Foundation model is required now, and the
checking code is relaxed to allow execution (with a diagnostic)
on unrecognised revisions of the Base and Foundation FVP.
Change-Id: I7cd3519dfb56954aafe5f52ce1fcea0ee257ba9f
Making the simple mmio_read_*() and mmio_write_*() functions inline
saves 360 bytes of code in FVP release build.
FixesARM-software/tf-issues#210
Change-Id: I65134f9069f3b2d8821d882daaa5fdfe16355e2f
This patch reworks FVP specific code responsible for determining
the entry point information for BL3-2 and BL3-3 stages when BL3-1
is configured as the reset handler.
Change-Id: Ia661ff0a6a44c7aabb0b6c1684b2e8d3642d11ec
The 'plat_print_gic_regs' macro was accessing the GICC_CTLR register
using the GICD_CTLR offset. This still generates the right code in
the end because GICD_CTLR == GICC_CTLR but this patch fixes it for
the logic of the code.
Change-Id: I7b17af50e587f07bec0e4c933e346088470c96f3
The bakery lock code currently expects the calling code to pass
the MPIDR_EL1 of the current CPU.
This is not always done correctly. Also the change to provide
inline access to system registers makes it more efficient for the
bakery lock code to obtain the MPIDR_EL1 directly.
This change removes the mpidr parameter from the bakery lock
interface, and results in a code reduction of 160 bytes for the
ARM FVP port.
FixesARM-software/tf-issues#213
Change-Id: I7ec7bd117bcc9794a0d948990fcf3336a367d543
The array of affinity nodes is currently allocated for 32 entries
with the PSCI_NUM_AFFS value defined in psci.h. This is not enough
for large systems, and will substantially over allocate the array
for small systems.
This patch introduces an optional platform definition
PLATFORM_NUM_AFFS to platform_def.h. If defined this value is
used for PSCI_NUM_AFFS, otherwise a value of two times the number
of CPU cores is used.
The FVP port defines PLATFORM_NUM_AFFS to be 10 which saves
nearly 1.5KB of memory.
FixesARM-software/tf-issues#192
Change-Id: I68e30ac950de88cfbd02982ba882a18fb69c1445
This memory is not used by the FVP port and requires an additional
4KB translation table.
This patch removes the entry from the memory map and reduces the
number of allocated translation tables.
FixesARM-software/tf-issues#196
Change-Id: I5b959e4fe92f5f892ed127c40dbe6c85eed3ed72
This patch removes the reinitialisation of memory mapped system timer
registers after a warm boot for the FVP. The system timers in FVP are
in the 'Always ON' power domain which meant the reinitialisation was
redundant and it could have conflicted with the setup the normal
world has done.
The programming of CNTACR(x) and CNTNSAR, the system timer registers,
are removed from the warm boot path with this patch.
FixesARM-software/tf-issues#169
Change-Id: Ie982eb03d1836b15ef3cf1568de2ea68a08b443e
According to documentation, the Rev field is located at bit 28 in
the V2M sysid register.
FixesARM-software/tf-issues#179
Change-Id: I2abb7bdc092ccd3f41f8962dc8d8d8e44e8dfdc3
Replace the current out-of-line assembler implementations of
the system register and system instruction operations with
inline assembler.
This enables better compiler optimisation and code generation
when accessing system registers.
FixesARM-software/tf-issues#91
Change-Id: I149af3a94e1e5e5140a3e44b9abfc37ba2324476
Current ATF uses a direct physical-to-virtual mapping, that is, a physical
address is mapped to the same address in the virtual space. For example,
physical address 0x8000_0000 is mapped to 0x8000_0000 virtual. This
approach works fine for FVP as all its physical addresses fall into 0 to
4GB range. But for other platform where all I/O addresses are 48-bit long,
If we follow the same direct mapping, we would need virtual address range
from 0 to 0x8fff_ffff_ffff, which is about 144TB. This requires a
significant amount of memory for MMU tables and it is not necessary to use
that much virtual space in ATF.
The patch is to enable mapping a physical address range to an arbitrary
virtual address range (instead of flat mapping)
Changed "base" to "base_va" and added "base_pa" in mmap_region_t and
modified functions such as mmap_add_region and init_xlation_table etc.
FixesARM-software/tf-issues#158
bl2_main() was overwriting any platform set X1 parameter for BL3-1
with the value zero.
This patch ensure that any platform set value is correctly passed
to BL3-1. The FVP port adds a check to verify this parameter is
being passed correctly.
FixesARM-software/tf-issues#173
Change-Id: Ifbcda73d3d41d2b04a4baf5614e9d2d21f1717c8
Rename the ic_* platform porting functions to plat_ic_* to be
consistent with the other functions in platform.h. Also rename
bl31_get_next_image_info() to bl31_plat_get_next_image_ep_info()
and remove the duplicate declaration in bl31.h.
Change-Id: I4851842069d3cff14c0a468daacc0a891a7ede84
Previously, the enable_mmu_elX() functions were implicitly part of
the platform porting layer since they were included by generic
code. These functions have been placed behind 2 new platform
functions, bl31_plat_enable_mmu() and bl32_plat_enable_mmu().
These are weakly defined so that they can be optionally overridden
by platform ports.
Also, the enable_mmu_elX() functions have been moved to
lib/aarch64/xlat_tables.c for optional re-use by platform ports.
These functions are tightly coupled with the translation table
initialization code.
FixesARM-software/tf-issues#152
Change-Id: I0a2251ce76acfa3c27541f832a9efaa49135cc1c
FVP specific files and functions containing the word "plat" have been
renamed to use the word "fvp" to distinguish them from the common
platform functionality and porting functions.
Change-Id: I39f9673dab3ee9c74bd18b3e62b7c21027232f7d
Some platform porting functions were in BL specific header files.
These have been moved to platform.h so that all porting functions
are in the same place. The functions are now grouped by BL.
Obsolete BL headers files have been removed.
Also, the weak declaration of the init_bl2_mem_layout() function
has been moved out the header file and into the source file
(bl_common.c) using the more succinct #pragma syntax. This
mitigates the risk of 2 weak definitions being created and the
wrong one being picked up by the compiler.
Change-Id: Ib19934939fd755f3e5a5a5bceec88da684308a83
Previously, platform.h contained many declarations and definitions
used for different purposes. This file has been split so that:
* Platform definitions used by common code that must be defined
by the platform are now in platform_def.h. The exact include
path is exported through $PLAT_INCLUDES in the platform makefile.
* Platform definitions specific to the FVP platform are now in
/plat/fvp/fvp_def.h.
* Platform API declarations specific to the FVP platform are now
in /plat/fvp/fvp_private.h.
* The remaining platform API declarations that must be ported by
each platform are still in platform.h but this file has been
moved to /include/plat/common since this can be shared by all
platforms.
Change-Id: Ieb3bb22fbab3ee8027413c6b39a783534aee474a
Currently the platform code gets to define the base address of each
boot loader image. However, the linker scripts couteract this
flexibility by enforcing a fixed overall layout of the different
images. For example, they require that the BL3-1 image sits below
the BL2 image. Choosing BL3-1 and BL2 base addresses in such a way
that it violates this constraint makes the build fail at link-time.
This patch requires the platform code to now define a limit address
for each image. The linker scripts check that the image fits within
these bounds so they don't rely anymore on the position of a given
image in regard to the others.
FixesARM-software/tf-issues#163
Change-Id: I8c108646825da19a6a8dfb091b613e1dd4ae133c
BL1 RO and RW base address used to be fixed, respectively to the first
address of the Trusted ROM and the first address of the Trusted RAM.
Introduce new platform defines to configure the BL1 RO and RW base
addresses.
Change-Id: If26616513a47798593a4bb845a4b0fb37c867cd6
At present BL3-1 has access to all of the SRAM, including
regions that are mapped as read-only and non-cacheable by other
firmware images.
This patch restricts BL3-1 to only be able to read/write from
memory used for its own data sections
Change-Id: I26cda1b9ba803d91a9eacda768f3ce7032c6db94
Conflicts:
plat/fvp/bl31_plat_setup.c
This patch adds support in the TSP for handling S-EL1 interrupts
handed over by the TSPD. It includes GIC support in its platform port,
updates various statistics related to FIQ handling, exports an entry
point that the TSPD can use to hand over interrupts and defines the
handover protocol w.r.t what context is the TSP expected to preserve
and the state in which the entry point is invoked by the TSPD.
Change-Id: I93b22e5a8133400e4da366f5fc862f871038df39
This patch introduces a set of functions which allow generic firmware
code e.g. the interrupt management framework to access the platform
interrupt controller. APIs for finding the type and id of the highest
pending interrupt, acknowledging and EOIing an interrupt and finding
the security state of an interrupt have been added. It is assumed that
the platform interrupt controller implements the v2.0 of the ARM GIC
architecture specification. Support for v3.0 of the specification for
managing interrupts in EL3 and the platform port will be added in the
future.
Change-Id: Ib3a01c2cf3e3ab27806930f1be79db2b29f91bcf
This patch introduces a framework for registering interrupts routed to
EL3. The interrupt routing model is governed by the SCR_EL3.IRQ and
FIQ bits and the security state an interrupt is generated in. The
framework recognizes three type of interrupts depending upon which
exception level and security state they should be handled in
i.e. Secure EL1 interrupts, Non-secure interrupts and EL3
interrupts. It provides an API and macros that allow a runtime service
to register an handler for a type of interrupt and specify the routing
model. The framework validates the routing model and uses the context
management framework to ensure that it is applied to the SCR_EL3 prior
to entry into the target security state. It saves the handler in
internal data structures. An API is provided to retrieve the handler
when an interrupt of a particular type is asserted. Registration is
expected to be done once by the primary CPU. The same handler and
routing model is used for all CPUs.
Support for EL3 interrupts will be added to the framework in the
future. A makefile flag has been added to allow the FVP port choose
between ARM GIC v2 and v3 support in EL3. The latter version is
currently unsupported.
A framework for handling interrupts in BL3-1 will be introduced in
subsequent patches. The default routing model in the absence of any
handlers expects no interrupts to be routed to EL3.
Change-Id: Idf7c023b34fcd4800a5980f2bef85e4b5c29e649
The TSP used to execute from secure DRAM on the FVPs because there was
not enough space in Trusted SRAM to fit it in. Thanks to recent RAM
usage enhancements being implemented, we have made enough savings for
the TSP to execute in SRAM.
However, there is no contiguous free chunk of SRAM big enough to hold
the TSP. Therefore, the different bootloader images need to be moved
around to reduce memory fragmentation. This patch keeps the overall
memory layout (i.e. keeping BL1 R/W at the bottom, BL2 at the top and
BL3-1 in between) but moves the base addresses of all the bootloader
images in such a way that:
- memory fragmentation is reduced enough to fit BL3-2 in;
- new base addresses are suitable for release builds as well as debug
ones;
- each image has a few extra kilobytes for future growth.
BL3-1 and BL3-2 are the images which received the biggest slice
of the cake since they will most probably grow the most.
A few useful numbers for reference (valid at the time of this patch):
|-----------------------|-------------------------------
| image size (debug) | extra space for the future
--------|-----------------------|-------------------------------
BL1 R/W | 20 KB | 4 KB
BL2 | 44 KB | 4 KB
BL3-1 | 108 KB | 12 KB
BL3-2 | 56 KB | 8 KB
--------|-----------------------|-------------------------------
Total | 228 KB | 28 KB = 256 KB
--------|-----------------------|-------------------------------
Although on FVPs the TSP now executes from Trusted SRAM by default,
this patch keeps the option to execute it from Trusted DRAM. This is
controlled by the build configuration 'TSP_RAM_LOCATION'.
FixesARM-Software/tf-issues#81
Change-Id: Ifb9ef2befa9a2d5ac0813f7f79834df7af992b94
The TSP's linker script used to assume that the TSP would
execute from secure DRAM. Although it is currently the case
on FVPs, platforms are free to use any secure memory they wish.
This patch introduces the flexibility to load the TSP into any
secure memory. The platform code gets to specify the extents of
this memory in the platform header file, as well as the BL3-2 image
limit address. The latter definition allows to check in a generic way
that the BL3-2 image fits in its bounds.
Change-Id: I9450f2d8b32d74bd00b6ce57a0a1542716ab449c
TZC-400 is configured to set the last 16MB of DRAM1 as secure memory and
the rest of DRAM as non-secure. Non-secure software must not attempt to
access the 16MB secure area.
Device tree files (sources and binaries) have been updated to match this
configuration, removing that memory from the Linux physical memory map.
To use UEFI and Linux with this patch, the latest version of UEFI and
the updated device tree files are required. Check the user guide in the
documentation for more details.
Replaced magic numbers with #define for memory region definition in the
platform security initialization function.
FixesARM-software/tf-issues#149
Change-Id: Ia5d070244aae6c5288ea0e6c8e89d92859522bfe
This change adds optional reset vector support to BL3-1
which means BL3-1 entry point can detect cold/warm boot,
initialise primary cpu, set up cci and mail box.
When using BL3-1 as a reset vector it is assumed that
the BL3-1 platform code can determine the location of
the BL3-2 images, or load them as there are no parameters
that can be passed to BL3-1 at reset.
It also fixes the incorrect initialisation of mailbox
registers on the FVP platform
This feature can be enabled by building the code with
make variable RESET_TO_BL31 set as 1
FixesARM-software/TF-issues#133FixesARM-software/TF-issues#20
Change-Id: I4e23939b1c518614b899f549f1e8d412538ee570
The issues addressed in this patch are:
1. Remove meminfo_t from the common interfaces in BL3-x,
expecting that platform code will find a suitable mechanism
to determine the memory extents in these images and provide
it to the BL3-x images.
2. Remove meminfo_t and bl31_plat_params_t from all FVP BL3-x
code as the images use link-time information to determine
memory extents.
meminfo_t is still used by common interface in BL1/BL2 for
loading images
Change-Id: I4e825ebf6f515b59d84dc2bdddf6edbf15e2d60f
This patch is based on spec published at
https://github.com/ARM-software/tf-issues/issues/133
It rearranges the bl31_args struct into
bl31_params and bl31_plat_params which provide the
information needed for Trusted firmware and platform
specific data via x0 and x1
On the FVP platform BL3-1 params and BL3-1 plat params
and its constituents are stored at the start of TZDRAM.
The information about memory availability and size for
BL3-1, BL3-2 and BL3-3 is moved into platform specific data.
Change-Id: I8b32057a3d0dd3968ea26c2541a0714177820da9
This patch reworks the handover interface from: BL1 to BL2 and
BL2 to BL3-1. It removes the raise_el(), change_el(), drop_el()
and run_image() functions as they catered for code paths that were
never exercised.
BL1 calls bl1_run_bl2() to jump into BL2 instead of doing the same
by calling run_image(). Similarly, BL2 issues the SMC to transfer
execution to BL3-1 through BL1 directly. Only x0 and x1 are used
to pass arguments to BL31. These arguments and parameters for
running BL3-1 are passed through a reference to a
'el_change_info_t' structure. They were being passed value in
general purpose registers earlier.
Change-Id: Id4fd019a19a9595de063766d4a66295a2c9307e1
This patch implements the register reporting when unhandled exceptions are
taken in BL3-1. Unhandled exceptions will result in a dump of registers
to the console, before halting execution by that CPU. The Crash Stack,
previously called the Exception Stack, is used for this activity.
This stack is used to preserve the CPU context and runtime stack
contents for debugging and analysis.
This also introduces the per_cpu_ptr_cache, referenced by tpidr_el3,
to provide easy access to some of BL3-1 per-cpu data structures.
Initially, this is used to provide a pointer to the Crash stack.
panic() now prints the the error file and line number in Debug mode
and prints the PC value in release mode.
The Exception Stack is renamed to Crash Stack with this patch.
The original intention of exception stack is no longer valid
since we intend to support several valid exceptions like IRQ
and FIQ in the trusted firmware context. This stack is now
utilized for dumping and reporting the system state when a
crash happens and hence the rename.
FixesARM-software/tf-issues#79 Improve reporting of unhandled exception
Change-Id: I260791dc05536b78547412d147193cdccae7811a
The TZC configuration on FVP was incorrectly allowing both secure
and non-secure accesses to the DRAM, which can cause aliasing
problems for software. It was also not enabling virtio access on
some models.
This patch fixes both of those issues. The patch also enabless
non-secure access to the DDR RAM for all devices with defined IDs.
The third region of DDR RAM has been removed from the configuration
as this is not used in any of the FVP models.
FixesARM-software/tf-issues#150FixesARM-software/tf-issues#151
Change-Id: I60ad5daaf55e14f178affb8afd95d17e7537abd7
Instead of having a single version of the MMU setup functions for all
bootloader images that can execute either in EL3 or in EL1, provide
separate functions for EL1 and EL3. Each bootloader image can then
call the appropriate version of these functions. The aim is to reduce
the amount of code compiled in each BL image by embedding only what's
needed (e.g. BL1 to embed only EL3 variants).
Change-Id: Ib86831d5450cf778ae78c9c1f7553fe91274c2fa
The goal of these macros is to improve code readability by providing
a concise way to check whether we are running in the expected
exception level.
Change-Id: If9aebadfb6299a5196e9a582b442f0971d9909b1
This patch moves console_init() to bl32_early_platform_setup(). It
also ensures that console_init() is called in each
blX_early_platform_setup() function before the console is used
e.g. through a printf call in an assert() statement.
FixesARM-software/TF-issues#127
Change-Id: I5b1f17e0152bab674d807d2a95ff3689c5d4794e
'PL011_BASE' macro is no longer used because the right UART base
address is now directly given to the 'console_init()' function.
This patch removes it.
Change-Id: I94759c99602df4876291a56f9f6a75de337a65ec
Instead of using the system register helper functions to read
or write system registers, assembler coded functions should
use MRS/MSR instructions. This results in faster and more
compact code.
This change replaces all usage of the helper functions with
direct register accesses.
Change-Id: I791d5f11f257010bb3e6a72c6c5ab8779f1982b3
disable_mmu() cannot work as a C function as there is no control
over data accesses generated by the compiler between disabling and
cleaning the data cache. This results in reading stale data from
main memory.
As assembler version is provided for EL3, and a variant that also
disables the instruction cache which is now used by the BL1
exception handling function.
FixesARM-software/tf-issues#147
Change-Id: I0cf394d2579a125a23c2f2989c2e92ace6ddb1a6
The current code does not always use data and instruction
barriers as required by the architecture and frequently uses
barriers excessively due to their inclusion in all of the
write_*() helper functions.
Barriers should be used explicitly in assembler or C code
when modifying processor state that requires the barriers in
order to enable review of correctness of the code.
This patch removes the barriers from the helper functions and
introduces them as necessary elsewhere in the code.
PORTING NOTE: check any port of Trusted Firmware for use of
system register helper functions for reliance on the previous
barrier behaviour and add explicit barriers as necessary.
FixesARM-software/tf-issues#92
Change-Id: Ie63e187404ff10e0bdcb39292dd9066cb84c53bf
Update code base to remove variables from the .data section,
mainly by using const static data where possible and adding
the const specifier as required. Most changes are to the IO
subsystem, including the framework APIs. The FVP power
management code is also affected.
Delay initialization of the global static variable,
next_image_type in bl31_main.c, until it is realy needed.
Doing this moves the variable from the .data to the .bss
section.
Also review the IO interface for inconsistencies, using
uintptr_t where possible instead of void *. Remove the
io_handle and io_dev_handle typedefs, which were
unnecessary, replacing instances with uintptr_t.
FixesARM-software/tf-issues#107.
Change-Id: I085a62197c82410b566e4698e5590063563ed304
Reduce the number of header files included from other header
files as much as possible without splitting the files. Use forward
declarations where possible. This allows removal of some unnecessary
"#ifndef __ASSEMBLY__" statements.
Also, review the .c and .S files for which header files really need
including and reorder the #include statements alphabetically.
FixesARM-software/tf-issues#31
Change-Id: Iec92fb976334c77453e010b60bcf56f3be72bd3e
Add tag names to all unnamed structs in header files. This
allows forward declaration of structs, which is necessary to
reduce header file nesting (to be implemented in a subsequent
commit).
Also change the typedef names across the codebase to use the _t
suffix to be more conformant with the Linux coding style. The
coding style actually prefers us not to use typedefs at all but
this is considered a step too far for Trusted Firmware.
Also change the IO framework structs defintions to use typedef'd
structs to be consistent with the rest of the codebase.
Change-Id: I722b2c86fc0d92e4da3b15e5cab20373dd26786f
Move the function prototypes from gic.h into either gic_v2.h or
gic_v3.h as appropriate. Update the source files to include the
correct headers.
Change-Id: I368cfda175cdcbd3a68f46e2332738ec49048e19
Remove all usage of the vpath keyword in makefiles as it was prone
to mistakes. Specify the relative paths to source files instead.
Also reorder source files in makefiles alphabetically.
FixesARM-software/tf-issues#121
Change-Id: Id15f60655444bae60e0e2165259efac71a50928b
Make codebase consistent in its use of #include "" syntax for
user includes and #include <> syntax for system includes.
FixesARM-software/tf-issues#65
Change-Id: If2f7c4885173b1fd05ac2cde5f1c8a07000c7a33
Move the FVP power driver to a directory under the FVP platform
port as this is not a generically usable driver.
Change-Id: Ibc78bd88752eb3e3964336741488349ac345f4f0
Move almost all system include files to a logical sub-directory
under ./include. The only remaining system include directories
not under ./include are specific to the platform. Move the
corresponding source files to match the include directory
structure.
Also remove pm.h as it is no longer used.
Change-Id: Ie5ea6368ec5fad459f3e8a802ad129135527f0b3
- Use the TrustZone controller on Base FVP to program DRAM access
permissions. By default no access to DRAM is allowed if
'secure memory' is enabled on the Base FVP.
- The Foundation FVP does not have a TrustZone controller but instead
has fixed access permissions.
- Update FDTs for Linux to use timers at the correct security level.
- Starting the FVPs with 'secure memory' disabled is also supported.
Limitations:
Virtio currently uses a reserved NSAID. This will be corrected in
future FVP releases.
Change-Id: I0b6c003a7b5982267815f62bcf6eb82aa4c50a31
Remove redundant code in plat_secondary_cold_boot_setup() in
plat/fvp/aarch64/bl1_plat_helpers.S.
FixesARM-software/tf-issues#136
Change-Id: I98c0a46d95cfea33125e34e609c83dc2c97cd86e
The BL images share common stack management code which provides
one coherent and one cacheable stack for every CPU. BL1 and BL2
just execute on the primary CPU during boot and do not require
the additional CPU stacks. This patch provides separate stack
support code for UP and MP images, substantially reducing the
RAM usage for BL1 and BL2 for the FVP platform.
This patch also provides macros for declaring stacks and
calculating stack base addresses to improve consistency where
this has to be done in the firmware.
The stack allocation source files are now included via
platform.mk rather than the common BLx makefiles. This allows
each platform to select the appropriate MP/UP stack support
for each BL image.
Each platform makefile must be updated when including this
commit.
FixesARM-software/tf-issues#76
Change-Id: Ia251f61b8148ffa73eae3f3711f57b1ffebfa632
Rename the array "mmap" in plat/fvp/aarch64/plat_common.c to
"fvp_mmap", to avoid confusion with the array of the same name
in lib/arch/aarch64/xlat_tables.c
FixesARM-software/tf-issues#114
Change-Id: I61478c0070aa52d5dcf5d85af2f353f56c060cfb
Rename drivers/console/console.c to
drivers/arm/peripherals/pl011/pl011_console.c. This makes it clear
that this is a pl011 specific console implementation.
FixesARM-software/tf-issues#129
Change-Id: Ie2f8109602134c5b86993e32452c70734c45a3ed
BL3-1 architecture setup code programs the system counter frequency
into the CNTFRQ_EL0 register. This frequency is defined by the
platform, though. This patch introduces a new platform hook that
the architecture setup code can call to retrieve this information.
In the ARM FVP port, this returns the first entry of the frequency
modes table from the memory mapped generic timer.
All system counter setup code has been removed from BL1 as some
platforms may not have initialized the system counters at this stage.
The platform specific settings done exclusively in BL1 have been moved
to BL3-1. In the ARM FVP port, this consists in enabling and
initializing the System level generic timer. Also, the frequency change
request in the counter control register has been set to 0 to make it
explicit it's using the base frequency. The CNTCR_FCREQ() macro has been
fixed in this context to give an entry number rather than a bitmask.
In future, when support for firmware update is implemented, there
is a case where BL1 platform specific code will need to program
the counter frequency. This should be implemented at that time.
This patch also updates the relevant documentation.
It properly fixesARM-software/tf-issues#24
Change-Id: If95639b279f75d66ac0576c48a6614b5ccb0e84b
This reverts commit 1c297bf015
because it introduced a bug: the CNTFRQ_EL0 register was no
longer programmed by all CPUs. bl31_platform_setup() function
is invoked only in the cold boot path and consequently only
on the primary cpu.
A subsequent commit will correctly implement the necessary changes
to the counter frequency setup code.
FixesARM-software/tf-issues#125
Conflicts:
docs/firmware-design.md
plat/fvp/bl31_plat_setup.c
Change-Id: Ib584ad7ed069707ac04cf86717f836136ad3ab54
This extends the --gc-sections behaviour to the many assembler
support functions in the firmware images by placing each function
into its own code section. This is achieved by creating a 'func'
macro used to declare each function label.
FixesARM-software/tf-issues#80
Change-Id: I301937b630add292d2dec6d2561a7fcfa6fec690
This patch reworks the console driver to ensure that each bootloader stage
initializes it independently. As a result, both BL3-1 and BL2 platform code
now calls console_init() instead of relying on BL1 to perform console setup
FixesARM-software/tf-issues#120
Change-Id: Ic4d66e0375e40a2fc7434afcabc8bbb4715c14ab
This commit isolates the accessor functions in pl011.c and builds
a wrapper layer for console functions.
This also modifies the console driver to use the pl011 FIFO.
FixesARM-software/tf-issues#63
Change-Id: I3b402171cd14a927831bf5e5d4bb310b6da0e9a8
This patch adds support in the generic PSCI implementation to call a
platform specific function to enter a standby state using an example
implementation in ARM FVP port
FixesARM-software/tf-issues#94
Change-Id: Ic1263fcf25f28e09162ad29dca954125f9aa8cc9
Trusted firmware binaries loaded via semihosting used to be
opened using 'r' mode (i.e. read mode). This is fine on POSIX
conforming systems (including Linux) but for Windows it also means
that the file should be opened in text mode. 'rb' mode must be
specified instead for binary mode. On POSIX conforming systems,
'rb' mode is equivalent to 'r' mode so it does no harm.
FixesARM-software/tf-issues#69
Change-Id: Ifa53f2ecfd765f572dea5dd73191f9fe2b2c2011
Each ARM Trusted Firmware image should know in which EL it is running
and it should use the corresponding register directly instead of reading
currentEL and knowing which asm register to read/write
Change-Id: Ief35630190b6f07c8fbb7ba6cb20db308f002945
Remove the hard coding of all the MMU related registers with 0 and disable MMU
by clearing the M and C bit in SCTLR_ELx
Change-Id: I4a0b1bb14a604734b74c32eb31315d8504a7b8d8
At present, bl1_arch_setup() and bl31_arch_setup() program the counter
frequency using a value from the memory mapped generic timer. The
generic timer however is not necessarily present on all ARM systems
(although it is architected to be present on all server systems).
This patch moves the timer setup to platform-specific code and updates
the relevant documentation. Also, CNTR.FCREQ is set as the specification
requires the bit corresponding to the counter's frequency to be set when
enabling. Since we intend to use the base frequency, set bit 8.
FixesARM-software/tf-issues#24
Change-Id: I32c52cf882253e01f49056f47c58c23e6f422652
This patch removes the 'CPU present' flag that's being set but not
referred or used anywhere else.
Change-Id: Iaf82bdb354134e0b33af16c7ba88eb2259b2682a
FixesARM-software/tf-issues#41
The policy functions for each file to be loaded were implemented by
copy/pasting one method and then varying the data checked.
This patch creates a generic function to check the policy based on the
data stored in a table.
This removes the amount of duplicated code but also makes the code
simpler and more efficient.
Change-Id: I1c52eacf6f18a1442dabbb33edd03d4bb8bbeae0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
This change requires all platforms to now specify a list of source files
rather than object files.
New source files should preferably be specified by using the path as
well and we should add this in the future for all files so we can remove
use of vpath. This is desirable because vpath hides issues like the fact
that BL2 currently pulls in a BL1 file bl1/aarch64/early_exceptions.S
and if in the future we added bl2/aarch64/early_exceptions.S then it's
likely only one of the two version would be used for both bootloaders.
This change also removes the 'dump' build target and simply gets
bootloaders to always generate a dump file. At the same time the -x
option is added so the section headers and symbols table are listed.
FixesARM-software/tf-issues#11
Change-Id: Ie38f7be76fed95756c8576cf3f3ea3b7015a18dc
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Make gicd_set_ipriorityr() actually write to the priority register.
Also correct callers of this function which want the highest priority
to use the value zero as this is the highest priority value according
to the ARM Generic Interrupt Controller Architecture Specification.
To make this easier to get right, we introduce defines for the lowest
and highest priorities for secure and non-secure interrupts.
FixesARM-software/tf-issues#21
Signed-off-by: Jon Medhurst <tixy@linaro.org>
The UART used to be initialised in bl1_platform_setup(). This is too
late because there are some calls to the assert() macro, which needs
to print some messages on the console, before that.
This patch moves the UART initialisation code to
bl1_early_platform_setup().
FixesARM-software/tf-issues#49
Change-Id: I98c83a803866372806d2a9c2e1ed80f2ef5b3bcc
At present many recoverable failures are reported as errors. This patch
modifies all such failures to be reported as warnings instead.
Change-Id: I5141653c82498defcada9b90fdf7498ba496b2f2
This patch adds the TSPD service which is responsible for managing
communication between the non-secure state and the Test Secure Payload
(TSP) executing in S-EL1.
The TSPD does the following:
1. Determines the location of the TSP (BL3-2) image and passes control
to it for initialization. This is done by exporting the 'bl32_init()'
function.
2. Receives a structure containing the various entry points into the TSP
image as a response to being initialized. The TSPD uses this
information to determine how the TSP should be entered depending on
the type of operation.
3. Implements a synchronous mechanism for entering into and returning
from the TSP image. This mechanism saves the current C runtime
context on top of the current stack and jumps to the TSP through an
ERET instruction. The TSP issues an SMC to indicate completion of the
previous request. The TSPD restores the saved C runtime context and
resumes TSP execution.
This patch also introduces a Make variable 'SPD' to choose the specific
SPD to include in the build. By default, no SPDs are included in the
build.
Change-Id: I124da5695cdc510999b859a1bf007f4d049e04f3
Co-authored-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
This patch adds a simple TSP as the BL3-2 image. The secure payload
executes in S-EL1. It paves the way for the addition of the TSP
dispatcher runtime service to BL3-1. The TSP and the dispatcher service
will serve as an example of the runtime firmware's ability to toggle
execution between the non-secure and secure states in response to SMC
request from the non-secure state. The TSP will be replaced by a
Trusted OS in a real system.
The TSP also exports a set of handlers which should be called in
response to a PSCI power management event e.g a cpu being suspended or
turned off. For now it runs out of Secure DRAM on the ARM FVP port and
will be moved to Secure SRAM later. The default translation table setup
code assumes that the caller is executing out of secure SRAM. Hence the
TSP exports its own translation table setup function.
The TSP only services Fast SMCs, is non-reentrant and non-interruptible.
It does arithmetic operations on two sets of four operands, one set
supplied by the non-secure client, and the other supplied by the TSP
dispatcher in EL3. It returns the result according to the Secure Monitor
Calling convention standard.
This TSP has two functional entry points:
- An initial, one-time entry point through which the TSP is initialized
and prepares for receiving further requests from secure
monitor/dispatcher
- A fast SMC service entry point through which the TSP dispatcher
requests secure services on behalf of the non-secure client
Change-Id: I24377df53399307e2560a025eb2c82ce98ab3931
Co-authored-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
This patch adds the ability to specify the base address of a UART
device for initialising the console. This allows a boot loader stage
to use a different UART device from UART0 (default) for the console.
Change-Id: Ie60b927389ae26085cfc90d22a564ff83ba62955
This patch factors out the ARM FVP specific code to create MMU
translation tables so that it is possible for a boot loader stage to
create a different set of tables instead of using the default ones.
The default translation tables are created with the assumption that
the calling boot loader stage executes out of secure SRAM. This might
not be true for the BL3_2 stage in the future.
A boot loader stage can define the `fill_xlation_tables()` function as
per its requirements. It returns a reference to the level 1
translation table which is used by the common platform code to setup
the TTBR_EL3.
This patch is a temporary solution before a larger rework of
translation table creation logic is introduced.
Change-Id: I09a075d5da16822ee32a411a9dbe284718fb4ff6
This patch adds the following support to the BL3-1 stage:
1. BL3-1 allows runtime services to specify and determine the security
state of the next image after BL3-1. This has been done by adding
the `bl31_set_next_image_type()` & `bl31_get_next_image_type()`
apis. The default security state is non-secure. The platform api
`bl31_get_next_image_info()` has been modified to let the platform
decide which is the next image in the desired security state.
2. BL3-1 exports the `bl31_prepare_next_image_entry()` function to
program entry into the target security state. It uses the apis
introduced in 1. to do so.
3. BL3-1 reads the information populated by BL2 about the BL3-2 image
into its internal data structures.
4. BL3-1 introduces a weakly defined reference `bl32_init()` to allow
initialisation of a BL3-2 image. A runtime service like the Secure
payload dispatcher will define this function if present.
Change-Id: Icc46dcdb9e475ce6575dd3f9a5dc7a48a83d21d1
This patch adds support for loading a BL3-2 image in BL2. In case a
BL3-2 image is found, it also passes information to BL3-1 about where it
is located and the extents of memory available to it. Information about
memory extents is populated by platform specific code.
The documentation has also been updated to reflect the above changes.
Change-Id: I526b2efb80babebab1318f2b02e319a86d6758b0
Co-authored-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
This patch reworks BL2 to BL3-1 hand over interface by introducing a
composite structure (bl31_args) that holds the superset of information
that needs to be passed from BL2 to BL3-1.
- The extents of secure memory available to BL3-1
- The extents of memory available to BL3-2 (not yet implemented) and
BL3-3
- Information to execute BL3-2 (not yet implemented) and BL3-3 images
This patch also introduces a new platform API (bl2_get_bl31_args_ptr)
that needs to be implemented by the platform code to export reference to
bl31_args structure which has been allocated in platform-defined memory.
The platform will initialize the extents of memory available to BL3-3
during early platform setup in bl31_args structure. This obviates the
need for bl2_get_ns_mem_layout platform API.
BL2 calls the bl2_get_bl31_args_ptr function to get a reference to
bl31_args structure. It uses the 'bl33_meminfo' field of this structure
to load the BL3-3 image. It sets the entry point information for the
BL3-3 image in the 'bl33_image_info' field of this structure. The
reference to this structure is passed to the BL3-1 image.
Also fixes issue ARM-software/tf-issues#25
Change-Id: Ic36426196dd5ebf89e60ff42643bed01b3500517
This patch increases coherent stack size for both debug and release
builds in order to accommodate stack-heavy printf() and extended EL3
functionality
Change-Id: I30ef30530a01517a97e63d703873374828c09f20
This patch moves the translation tables into their own section. This
saves space that would otherwise have been lost in padding due to page
table alignment constraints. The BL31 and BL32 bases have been
consequently adjusted.
Change-Id: Ibd65ae8a5ce4c4ea9a71a794c95bbff40dc63e65
The Firmware Image Package (FIP) driver allows for data to be loaded
from a FIP on platform storage. The FVP supports loading bootloader
images from a FIP located in NOR FLASH.
The implemented FVP policy states that bootloader images will be
loaded from a FIP in NOR FLASH if available and fall back to loading
individual images from semi-hosting.
NOTE:
- BL3-3(e.g. UEFI) is loaded into DRAM and needs to be configured
to run from the BL33_BASE address. This is currently set to
DRAM_BASE+128MB for the FVP.
Change-Id: I2e4821748e3376b5f9e467cf3ec09509e43579a0
The modified implementation uses the IO abstraction rather than
making direct semi-hosting calls. The semi-hosting driver is now
registered for the FVP platform during initialisation of each boot
stage where it is used. Additionally, the FVP platform includes a
straightforward implementation of 'plat_get_image_source' which
provides a generic means for the 'load_image' function to determine
how to access the image data.
Change-Id: Ia34457b471dbee990c7b3c79de7aee4ceea51aa6
This is intended primarily for use as a storage abstraction.
It allows operations such as image-loading to be implemented
in a platform-independent fashion. Each platform registers
a set of IO drivers during initialisation. The platform must
also provide a function that will return a device and a specifier
that can be used to access specified content.
Clients of the API will primarily use device and entity handles.
The term "entity" is deliberately vague, to allow for different
representations of content accessed using different types of
specifier, but will often be interpreted as a "file" where the
specifier will normally be its path.
This commit builds, but is intended to be paired with a sample
implementation of "load_image" using a semi-hosting driver on FVP.
Change-Id: Id3b52f1c0eb9ce76b44b99fc6b6460803668cc86
The last CPU in a cluster is responsible for issuing the cluster power
down request to the FVP power controller. If another CPU in this
cluster wakes up before the last CPU enters WFI then the cluster power
down request remains pending. If this request is not cancelled and the
newly woken up CPU enters a simple WFI later, the power controller
powers the cluster down. This leads to unpredictable behaviour.
This patch fixes this issue by ensuring that the first CPU to wake up
in a cluster writes its MPIDR to the power controller's PPONR. This
cancels any pending cluster power down request.
Change-Id: I7e787adfd6c9a0bd7308390e3309d46f35c01086
The FVP platform has a few filenames that begin with fvp_. These are
renamed to plat_ to make it easier to use the FVP port as a template.
Change-Id: I601e6256d5ef3bae81a2e1f5df6de56db5b27069
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Tidy up the spacing of variable definitions within the makefiles to make
them more consistent, easier to read and amend.
Change-Id: Ic6d7c8489ca4330824abb5cd1ead8f1d449d1a85
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Move all explicit platform or architecture specific references
into a new platform.mk file that is defined for each platform.
Change-Id: I9d6320d1ba957e0cc8d9b316b3578132331fa428
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Ctags seem to have a problem with generating tags for assembler symbols
when a comment immediately follows an assembly label.
This patch inserts a single space character between the label
definition and the following comments to help ctags.
The patch is generated by the command:
git ls-files -- \*.S | xargs sed -i 's/^\([^:]\+\):;/\1: ;/1'
Change-Id: If7a3c9d0f51207ea033cc8b8e1b34acaa0926475
The GICv3 distributor can have more ports than CPUs are available in
the system. Probe all re-distributors and use the matching affinity
levels as specified by each core and re-distributor to decide which
re-distributor to use with which CPU core.
If a core cannot be matched with a re-distributor, the core panics and
is placed in an endless loop.
Change-Id: Ie393cfe07c7449a2383959e3c968664882e18afc
GIC setup code which used to be in bl31_plat_setup.c is now in fvp_gic.c
to simplify future changes to other bootloader stages. This patch moves
code from bl31_plat_setup.c to fvp_gic.c, simplifies the include file
list for bl31_plat_setup.c, moves GIC declarations from the bl31.h header
file into the platform.h, and reworks files according to coding style
guide.
Change-Id: I48d82a4ba33e7114dcc88f9ca98767a06cf8f417
ns_entry_info used to be a per-cpu array. This is a waste of space
because it is only accessed by the primary CPU on the cold boot path.
This patch reduces ns_entry_info to a single-cpu area.
Change-Id: I647c70c4e76069560f1aaad37a1d5910f56fba4c
Platform setup code has to reserve some memory for storing the
memory layout information. It is populated in early platform setup
code.
blx_get_sec_mem_layout() functions used to return a copy of this
structure. This patch modifies blx_get_sec_mem_layout() functions
so that they now directly return a pointer to their memory layout
structure. It ensures that the memory layout returned by
blx_get_sec_mem_layout() is always up-to-date and also avoids a
useless copy of the meminfo structure.
Also rename blx_get_sec_mem_layout() to blx_plat_sec_mem_layout()
to make it clear those functions are platform specific.
Change-Id: Ic7a6f9d6b6236b14865ab48a9f5eff545ce56551
In fvp_affinst_on/suspend, the non-secure entrypoint is always
expected to lie in the DRAM. This check will not be valid if
non-secure code executes directly out of flash e.g. a baremetal
test. This patch removes this check.
Change-Id: I0436e1138fc394aae8ff1ea59ebe38b46a440b61
In the previous psci implementation, the psci_afflvl_power_on_finish()
function would run into an error condition if the value of the context
id parameter in the cpu_on and cpu_suspend psci calls was != 0. The
parameter was being restored as the return value of the affinity level
0 finisher function. A non zero context id would be treated as an
error condition. This would prevent successful wake up of the cpu from
a power down state. Also, the contents of the general purpose
registers were not being cleared upon return to the non-secure world
after a cpu power up. This could potentially allow the non-secure
world to view secure data.
This patch ensures that all general purpose registers are set to ~0
prior to the final eret that drops the execution to the non-secure
world. The context id is used to initialize the general purpose
register x0 prior to re-entry into the non-secure world and is no
longer restored as a function return value. A platform helper
(platform_get_stack()) has been introduced to facilitate this change.
Change-Id: I2454911ffd75705d6aa8609a5d250d9b26fa097c
The FVP specific code that gets called after a cpu has been physically
powered on after having been turned off or suspended earlier does not
clear the PWRC.PWKUPR.WEN bit. Not doing so causes problems if: a cpu
is suspended, woken from suspend, powered down through a cpu_off call
& receives a spurious interrupt. Since the WEN bit is not cleared
after the cpu woke up from suspend, the spurious wakeup will power the
cpu on. Since the cpu_off call clears the jump address in the mailbox
this spurious wakeup will cause the cpu to crash.
This patch fixes this issue by clearing the WEN bit whenever a cpu is
powered up.
Change-Id: Ic91f5dffe1ed01d76bc7fc807acf0ecd3e38ce5b
- Add instructions for contributing to ARM Trusted Firmware.
- Update copyright text in all files to acknowledge contributors.
Change-Id: I9311aac81b00c6c167d2f8c889aea403b84450e5
This patch makes sure the C runtime environment is properly
initialised before executing any C code.
- Zero-initialise NOBITS sections (e.g. the bss section).
- Relocate BL1 data from ROM to RAM.
Change-Id: I0da81b417b2f0d1f7ef667cc5131b1e47e22571f
- Check at link-time that bootloader images will fit in memory
at run time and that they won't overlap each other.
- Remove text and rodata orphan sections.
- Define new linker symbols to remove the need for platform setup
code to know the order of sections.
- Reduce the size of the raw binary images by cutting some sections
out of the disk image and allocating them at load time, whenever
possible.
- Rework alignment constraints on sections.
- Remove unused linker symbols.
- Homogenize linker symbols names across all BLs.
- Add some comments in the linker scripts.
Change-Id: I47a328af0ccc7c8ab47fcc0dc6e7dd26160610b9
On FVP platforms, for now it is assumed that the normal-world
bootloader is already sitting in its final memory location.
Therefore, BL2 doesn't need to load it and so it doesn't need
to know the extents of the non-trusted DRAM.
Change-Id: I33177ab43ca242edc8958f2fa8d994e7cf3e0843
Also, don't invalidate the TLBs in disable_mmu() function, it's better
to do it in enable_mmu() function just before actually enabling the
MMU.
Change-Id: Ib32d6660019b0b2c17254156aad4be67ab4970e1
Global and static variables are expected to be initialised to zero
by default. This is specified by the C99 standard. This patch
removes some unnecessary initialisations of such variables.
It fixes a compilation warning at the same time:
plat/fvp/bl31_plat_setup.c:82:3: warning: missing braces around
initializer [-Wmissing-braces]
section("tzfw_coherent_mem"))) = {0};
^
plat/fvp/bl31_plat_setup.c:82:3: warning: (near initialization for
‘ns_entry_info[0]’) [-Wmissing-braces]
Note that GCC should not have emitted this warning message in the
first place. The C Standard permits braces to be elided around
subaggregate initializers. See this GCC bug report:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=53119
Change-Id: I13cb0c344feb9803bca8819f976377741fa6bc35
blx_plat_arch_setup() should only perform platform-specific
architectural setup, e.g. enabling the MMU. This patch moves
generic architectural setup code out of blx_plat_arch_setup().
Change-Id: I4ccf56b8c4a2fa84909817779a2d97a14aaafab6
danh-arm
Soby Mathew
Juan Castillo
Vikram Kanigiri
achingupta
Sandrine Bailleux
Andrew Thoelke
Lin Ma
Harry Liebel
Jeenu Viswambharan
Ryan Harkin
Jon Medhurst
James Morrissey
Ian Spray