Cortex A78 erratum 1951500 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r1p1. The workaround is to insert a DMB ST before
acquire atomic instructions without release semantics. This workaround
works on revisions r1p0 and r1p1, in r0p0 there is no workaround.
SDEN can be found here:
https://documentation-service.arm.com/static/5fb66157ca04df4095c1cc2e
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I47610cee75af6a127ea65edc4d5cffc7e6a2d0a3
Cortex A78 erratum 1941498 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r1p1. The workaround is to set bit 8 in the ECTLR_EL1
register, there is a small performance cost (<0.5%) for setting this bit.
SDEN can be found here:
https://documentation-service.arm.com/static/5fb66157ca04df4095c1cc2e
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I959cee8e3d46c1b84ff5e4409ce5945e459cc6a9
Write char if fifo is empty. If this is done like this all chars are
printed. Because origin code just put that chars to fifo and in case of
reset messages were missing.
Before this change chars are put to fifo and only check before adding if
fifo is full. The patch is changing this logic that it is adding char only
when fifo is empty to make sure that in case of reset (by another SW for
example) all chars are printed. Maybe one char can be missed but for IP
itself it is much easier to send just one char compare to full fifo.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: Ic24c2c1252bce24be2aed68ee29477ca4a549e5f
* changes:
allwinner: Use RSB for the PMIC connection on H6
allwinner: Return the PMIC to I2C mode after use
allwinner: Always use a 3MHz RSB bus clock
Increase SP max size for latest OP-TEE build with debug and
stats enabled.
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: I4593884e0deb39ada10009f6876d815136f8ee65
This gives the rich OS the flexibility to choose between I2C and RSB
communication. Since a runtime address can only be assigned once after
entering RSB mode, it also lets the rich OS choose any runtime address.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Id49c124c5e925985fc31c0ba38c7fb6c941aafa8
If FEAT_PMUv3 is implemented and PMEVTYPER<n>(_EL0).MT bit is implemented
as well, it is possible to control whether PMU counters take into account
events happening on other threads.
If FEAT_MTPMU is implemented, EL3 (or EL2) can override the MT bit
leaving it to effective state of 0 regardless of any write to it.
This patch introduces the DISABLE_MTPMU flag, which allows to diable
multithread event count from EL3 (or EL2). The flag is disabled
by default so the behavior is consistent with those architectures
that do not implement FEAT_MTPMU.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: Iee3a8470ae8ba13316af1bd40c8d4aa86e0cb85e
This patch provides the following changes:
- Adds definition for FEAT_MTE3 value in ID_AA64PFR1_EL1 register
- Enables Memory Tagging Extension for FEAT_MTE3.
Change-Id: I735988575466fdc083892ec12c1aee89b5faa472
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Enable basic support for Neoverse-N2 CPUs.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I498adc2d9fc61ac6e1af8ece131039410872e8ad
This patch provides the changes listed below:
- Adds new bit fields definitions for SCTLR_EL1/2 registers
- Corrects the name of SCTLR_EL1/2.[20] bit field from
SCTLR_UWXN_BIT to SCTLR_TSCXT_BIT
- Adds FEAT_PANx bit field definitions and their possible
values for ID_AA64MMFR1_EL1 register.
- Adds setting of SCTLR_EL1.SPAN bit to preserve PSTATE.PAN
on taking an exception to EL1 in spm_sp_setup() function
(services\std_svc\spm_mm\spm_mm_setup.c)
Change-Id: If51f20e7995c649126a7728a4d0867041fdade19
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
This errata workaround did not work as intended and was revised in
subsequent SDEN releases so we are reverting this change.
This is the patch being reverted:
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/4686
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I8554c75d7217331c7effd781b5f7f49b781bbebe
This errata workaround did not work as intended and was revised in
subsequent SDEN releases so we are reverting this change.
This is the patch being reverted:
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/4684
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I560749a5b55e22fbe49d3f428a8b9545d6bdaaf0
Currently, when RECLAIM_INIT_CODE is set, the
stacks are scaled to ensure that the entirety
of the init section can be reclaimed as stack.
This causes an issue in lib/psci/aarch64/psci_helpers.S,
where the stack size is used for cache operations in
psci_do_pwrdown_cache_maintenance(). If the stacks
are scaled, then the PSCI code may fail to invalidate
some of the stack memory before power down.
Resizing stacks is also not good for stability in general,
since code that works with a small number of cores may
overflow the stack when the number of cores is increased.
Change to make every stack be PLATFORM_STACK_SIZE big,
and allow the total stack to be smaller than the
init section.
Any pages of the init section not reclaimed as
stack will be set to read-only and execute-never,
for security.
Change-Id: I10b3884981006431f2fcbec3864c81d4a8c246e8
Signed-off-by: David Horstmann <david.horstmann@arm.com>
When issuing barrier instructions like DSB or DMB, we must make sure
that the compiler does not undermine out efforts to fence off
instructions. Currently the compiler is free to move the barrier
instruction around, in respect to former or later memory access
statements, which is not what we want.
Add a compiler barrier to the inline assembly statement in our
DEFINE_SYSOP_TYPE_FUNC macro, to make sure memory accesses are not
reordered by the compiler.
This is in line with Linux' definition:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/include/asm/barrier.h
Since those instructions share a definition, apart from DSB and DMB this
now also covers some TLBI instructions. Having a compiler barrier there
also is useful, although we probably have stronger barriers in place
already.
Change-Id: If6fe97b13a562643a643efc507cb4aad29daa5b6
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
To support platforms without Trusted DRAM this patch defines
PLAT_ARM_SPMC_BASE and enables platform to use either Trusted DRAM or
DRAM region behind TZC.
Change-Id: Icaa5c7d33334258ff27e8e0bfd0812c304e68ae4
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Retrieve peripheral base address from a define instead of
parsing the device tree. The goal is to improve execution time.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2588c53ad3d4abcc3d7fe156458434a7940dd72b
Usually, C has no problem up-converting types to larger bit sizes. MISRA
rule 10.7 requires that you not do this, or be very explicit about this.
This resolves the following required rule:
bl1/aarch64/bl1_context_mgmt.c:81:[MISRA C-2012 Rule 10.7 (required)]<None>
The width of the composite expression "0U | ((mode & 3U) << 2U) | 1U |
0x3c0U" (32 bits) is less that the right hand operand
"18446744073709547519ULL" (64 bits).
This also resolves MISRA defects such as:
bl2/aarch64/bl2arch_setup.c:18:[MISRA C-2012 Rule 12.2 (required)]
In the expression "3U << 20", shifting more than 7 bits, the number
of bits in the essential type of the left expression, "3U", is
not allowed.
Further, MISRA requires that all shifts don't overflow. The definition of
PAGE_SIZE was (1U << 12), and 1U is 8 bits. This caused about 50 issues.
This fixes the violation by changing the definition to 1UL << 12. Since
this uses 32bits, it should not create any issues for aarch32.
This patch also contains a fix for a build failure in the sun50i_a64
platform. Specifically, these misra fixes removed a single and
instruction,
92407e73 and x19, x19, #0xffffffff
from the cm_setup_context function caused a relocation in
psci_cpus_on_start to require a linker-generated stub. This increased the
size of the .text section and caused an alignment later on to go over a
page boundary and round up to the end of RAM before placing the .data
section. This sectionn is of non-zero size and therefore causes a link
error.
The fix included in this reorders the functions during link time
without changing their ording with respect to alignment.
Change-Id: I76b4b662c3d262296728a8b9aab7a33b02087f16
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
And from crash_console_flush.
We ignore the error information return by console_flush in _every_
place where we call it, and casting the return type to void does not
work around the MISRA violation that this causes. Instead, we collect
the error information from the driver (to avoid changing that API), and
don't return it to the caller.
Change-Id: I1e35afe01764d5c8f0efd04f8949d333ffb688c1
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
This patch updates the MIDR value for rainier cpu.
Change-Id: I99a5d96f757239cf65b2688095c4ec66cd991cf9
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Cortex A77 erratum 1925769 is a Cat B erratum, present in older
revisions of the Cortex A77 processor core. The workaround is to
set bit 8 in the ECTLR_EL1 register, there is a small performance cost
(<0.5%) for setting this bit.
SDEN can be found here:
https://documentation-service.arm.com/static/5f7c35d0d3be967f7be46d33
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I9cf0e0b5dc1e3e32e24279d2632c759cc7bd7ce9
Update the libfdt source files, the upstream commit is 73e0f143b73d
("libfdt: fdt_strerror(): Fix comparison warning").
This brings us the fixes for the signed/unsigned comparison warnings,
so platforms can enable -Wsign-compare now.
Change-Id: I303d891c82ffea0acefdde27289339db5ac5a289
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
This patch migrates the mbedcrypto dependency for TF-A
to mbedTLS repo v2.24.0 which is the latest release tag.
The relevant documentation is updated to reflect the
use of new version.
Change-Id: I116f44242e8c98e856416ea871d11abd3234dac1
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
* changes:
arm_fpga: Add platform documentation
arm_fpga: Add post-build linker script
arm_fpga: Add ROM trampoline
arm_fpga: Add devicetree file
arm_fpga: Remove SPE PMU DT node if SPE is not available
arm_fpga: Adjust GICR size in DT to match number of cores
fdt: Add function to adjust GICv3 redistributor size
drivers: arm: gicv3: Allow detecting number of cores
We now have code to detect the CPU topology at runtime, and can also
populate the CPU nodes in a devicetree accordingly. This is used by the
ARM FPGA port, for instance.
But also a GICv3 compatible interrupt controller provides MMIO frames
per core, so the size of this region needs to be adjusted in the DT,
to match the number of cores as well.
Provide a generic function to find the GICv3 interrupt controller in
the DT, then adjust the "reg" entry to match the number of detected
cores. Since the size of the GICR frame per cores differs between
GICv4 and GICv3, this size is supplied as a parameter to the function.
The caller should determine the applicable value by either hardcoding
it or by observing GICR_TYPER.VLPIS.
Change-Id: Ic2a6445c2c5381a36bf24263f52fcbefad378c05
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
A GICv3 interrupt controller will be instantiated for a certain number
of cores. This will result in the respective number of GICR frames. The
last frame will have the "Last" bit set in its GICR_TYPER register.
For platforms with a topology unknown at build time (the Arm FPGAs, for
instance), we need to learn the number of used cores at runtime, to size
the GICR region in the devicetree accordingly.
Add a generic function that iterates over all GICR frames until it
encounters one with the "Last" bit set. It returns the number of cores
the GICv3 has been configured for.
Change-Id: I79f033c50dfc1c275aba7122725868811abcc4f8
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* changes:
plat/arm: Add platform support for Morello
fdts: add device tree sources for morello platform
lib/cpus: add support for Morello Rainier CPUs
This patch adds CPU support for the Rainier CPU which is
derived from Neoverse N1 r4p0 CPU and implements the
Morello capability architecture.
Change-Id: Ic6b796481da5a66504ecb0648879446edf4c69fb
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
Cortex A77 erratum 1508412 is a Cat B Errata present in r0p0 and r1p0.
The workaround is a write sequence to several implementation defined
registers based on A77 revision.
This errata is explained in this SDEN:
https://static.docs.arm.com/101992/0010/Arm_Cortex_A77_MP074_Software_Developer_Errata_Notice_v10.pdf
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I217993cffb3ac57c313db8490e7b8a7bb393379b
This patch allows the system to fallback to a default CPU library
in case the MPID does not match with any of the supported ones.
This feature can be enabled by setting SUPPORT_UNKNOWN_MPID build
option to 1 (enabled by default only on arm_fpga platform).
This feature can be very dangerous on a production image and
therefore it MUST be disabled for Release images.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I0df7ef2b012d7d60a4fd5de44dea1fbbb46881ba
Depending on compiler, the issue about bool or uint*_t not defined can
appear.
Correct this by adding stdbool.h and stdint.h includes in etzpc.h.
Change-Id: If1419dc511efbe682459fa4a776481fa52a38aa3
Signed-off-by: Yann Gautier <yann.gautier@st.com>
nand_wait_ready is called with a millisecond delay
but the timeout used a micro second. Fixing the conversion
in the timeout call.
The prototype of the function is also changed to use an unsigned int
parameter.
Change-Id: Ia3281be7980477dfbfdb842308d35ecd8b926fb8
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
There is one dtsi file per SoC version:
- STM32MP151: common part for all version, Single Cortex-A7
- STM32MP153: Dual Cortex-A7
- STM32MP157: + GPU and DSI, but not needed for TF-A
The STM32MP15xC include a cryptography peripheral, add it in a dedicated
file.
There are 4 packages available, for which the IOs number change. Have one
file for each package. The 2 packages AB and AD are added.
STM32157A-DK1 and STM32MP157C-DK2 share most of their features, a common
dkx file is then created.
Some reordering is done in other files, and realign with kernel DT files.
The DDR files are generated with our internal tool, no changes in the
registers values.
Change-Id: I9f2ef00306310abe34b94c2f10fc7a77a10493d1
Signed-off-by: Yann Gautier <yann.gautier@st.com>
johpow01
Michal Simek
André Przywara
Madhukar Pappireddy
Arunachalam Ganapathy
Samuel Holland
Javier Almansa Sobrino
Manish Pandey
Alexei Fedorov
David Horstmann
Joanna Farley
Saurabh Gorecha
Mark Dykes
Yann Gautier
Jimmy Brisson
Manish V Badarkhe
Lauren Wehrmeister
Jagadeesh Ujja
Manoj Kumar
Lionel Debieve