Add drivers to support MCUSYS off when system suspend.
Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.corp-partner.google.com>
Change-Id: I388fd2318f471083158992464ecdf2181fc7d87a
Add PTP3 drivers to protect CPU excessive voltage drop
in CPU heavy loading.
Change-Id: I7bd37912c32d5328ba0287fccc8409794bd19c1d
Signed-off-by: Elly Chiang <elly.chiang@mediatek.com>
In mt8195 suspend/resume flow, ATF has to communicate with a subsys by
read/write the subsys registers. However, the register region of subsys
doesn't include in the MMU mapping region. It triggers MMU faults.
This patch extends the MMU region 0 size to cover all mt8195 HW modules.
This patch also remove MMU region 1 because region 0 covers region 1.
Change-Id: I3a186ed71d0d963b59ae55e27a6d27a01fe4f638
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
The partition layout description JSON file generated by TF-A tests
declares a fourth test partition called Ivy demonstrating the
implementation of a S-EL0 partition supported by a S-EL1 shim.
Change-Id: If8562acfc045d6496dfdb3df0524b3a069357f8e
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Add a generic function to setup the stm32image IO.
Change-Id: I0f7cf4a6030605037643f3119b809e0319d926af
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Add a panic() at the end of stm32mp_io_setup() if the boot interface
given in ROM code boot context is not supported.
Change-Id: I0d50f21a11231febd21041b6e63108cc3e6f4f0c
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
We don't ever expect to load a binary with an STM32 header on the Arm
FVP platform so remove this type of image from the list of
measurements.
Also remove the GPT image type from the list, as it does not get
measured. GPT is a container, just like FIP is. We don't measure the FIP
but rather the images inside it. It would seem logical to treat GPT the
same way.
Besides, only images that get loaded through load_auth_image() get
measured right now. GPT processing happens before that and is handled in
a different way (see partition_init()).
Change-Id: Iac4de75380ed625b228e69ee4564cf9e67e19336
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
For Arm platforms PIE is enabled when RESET_TO_BL31=1 in aarch64 mode on
the similar lines enable PIE when RESET_TO_SP_MIN=1 in aarch32 mode.
The underlying changes for enabling PIE in aarch32 is submitted in
commit 4324a14bf
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib8bb860198b3f97cdc91005503a3184d63e15469
Third instance of cactus is a UP SP. Set its vcpu count to 1.
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: I34b7feb2915e6d335e690e89dea466e75944ed1b
This patch will make BL2_BASE to be hex valaue but
not a shell command.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Iebb86a0b9bc8cab1676bd8e898cf4a1b6d16f472
Some build variables have already defined in common
make helper file, use them directly.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I7fe6331160bfdf315924d4498d78b0a399eb2e89
To quote jwerner in T925:
"The __sramdata in the declaration is a mistake, the correct target
section for that global needs to be .pmusram.data. This used to be
in .sram.data once upon a time but then the suspend.c stuff got added
and required it to be moved to PMUSRAM. I guess they forgot to update
that part in the declaration and since the old GCC seemed to silently
prefer the attribute in the definition, nobody noticed."
This fixes building with gcc 11.
fix #T925
Change-Id: I2b91542277c95cf487eaa1344927294d5d1b8f2b
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
In stm32mp1_syscfg_disable_io_compensation(), to disable the IO
compensation cell, we have to set the corresponding bit in
SYSCFG_CMPENCLRR register, instead of clearing the bit in SETR register.
Change-Id: I510a50451f8afb9e98c24e1ea84efbf73a39e6b4
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The dependency on this macro was added by patch [1]. But the macro
itself was forgotten in the patch.
[1] 128e0b3e2e ("stm32mp1: update rules for stm32image tool")
Change-Id: I49219e1e13828b97b95f404983da33ef4567fe23
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
BSEC services should return SMC error codes as other IDs (defined in
stm32mp1_smc.h) and not BSEC driver ones. So that non-secure caller
is able to treat them correctly.
In global SMC handler, unknown ID should also return a value from this
definition list, and not the generic one, which seems not well adapted
for our needs.
Two unsigned values initializations are also changed from 0 to 0U.
Change-Id: Ib6fd3866a748cefad1d13d48f7be38241621023e
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
As there is constraint with the space for the release builds,
remove some of the legacy code.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I5b8b16f34ed8e480f16ab1aeac80b85cdb391852
Add imx_system_reset2 which extends existing SYSTEM_RESET. It provides
architectural reset definitions and vendor-specific resets.
By default warm reset is triggered.
Also refactor existing implementation of wdog reset, add details about
each flag used.
Change-Id: Ia7348c32c385f1c61f8085776e81dd1e38ddda5c
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
* changes:
feat(plat/nxp/lx2): add SUPPORTED_BOOT_MODE definition
feat(plat/nxp/common): add build macro for BOOT_MODE validation checking
refactor(plat/nxp/common): moved soc make-variables to new soc_common_def.mk
refactor(plat/nxp/lx216x): clean up platform configure file
refactor(plat/nxp/common): moved plat make-variables to new plat_common_def.mk
* changes:
refactor(plat/nvidia): use SOC_ID defines
refactor(plat/mediatek): use SOC_ID defines
refactor(plat/arm): use SOC_ID defines
feat(plat/st): implement platform functions for SMCCC_ARCH_SOC_ID
refactor(plat/st): export functions to get SoC information
feat(smccc): add bit definition for SMCCC_ARCH_SOC_ID
Add macro of SUPPORTED_BOOT_MODE for board lx2160ardb, lx2160aqds,
lx2162aqds.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I4451ca030eca79c9bc5fee928eec497a7f0e878c
1. Added the build macro "add_boot_mode_define".
2. Use the macro to validate current BOOT_MODE against the
pre-determined list of SUPPORTED_BOOT_MODE, so each platform
need to define the list: SUPPORTED_BOOT_MODE.
3. Reports error if BOOT_MODE is not in SUPPORTED_BOOT_MODE list,
or BOOT_MODE is not supported yet althoug it is in SUPPORTED_BOOT_MODE.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I29be60ecdb19fbec1cd162e327cdfb30ba629b07
Move some soc make variables to new soc_common_def.mk,
then it can be reused by other platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Ia30bd332c95b6475f1cfee2f03a8ed3892a9568d
Use common code in common file to configure platform.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I72fe22751f12b8a4996a7b9f75fae4c912ea86de
Move some common make variables to new plat_common_def.mk,
then it can be reused by other platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I37bd65b0f8124f63074fa03339f886c2cdb30bd3
In case of TF-A running out of DDR there is a need to reserved
memory to let other SW know that none can't use this memory. HW
wise this region can be (and should be) also protected by
protection unit XMPU. This is the first step to add reserved
memory location to DT.
DT address corresponds with default address in U-Boot and also
default address in Xilinx BSPs.
Code is valid only when TF-A runs out of DDR. When it runs out
of OCM there is no need to reseve anything because OCM is hidden
to OS.
Change-Id: I01f230ced67207a159128cc11d11d36dd4590cab
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Add sdei support for i.MX8MM, this is to let jailhouse Hypervisor
could use SDEI to do hypervisor management, after physical IRQ
has been disabled routing.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I8308c629448bd8adca9d3d25701adcf0c5a6afc2
Add sdei support for i.MX8MN, this is to let jailhouse Hypervisor
could use SDEI to do hypervisor management, after physical IRQ
has been disabled routing.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: Ie15fffdd09e1bba1b22334b8ccac2335c96b8b4d
Device Tree address is now a parameter for dt_open_and_check() function.
This will allow better flexibility when introducing PIE and FIP.
The fdt pointer is now only assigned if the given address holds
a valid device tree file. This allows removing the fdt_checked variable,
as we now check fdt is not null.
Change-Id: I04cbb2fc05c9c711ae1c77d56368dbeb6dd4b01a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The boot device is now checked inside a dedicated rule, that is only
called during BL2 compilation step
Change-Id: Ie7bcd1f166285224b0c042238989a82f7b6105c6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Added a new STM32MP_EMMC_BOOT option, which is used to look for SSBL in
the same eMMC boot partition TF-A booted from at a fixed 256k offset. In
case STM32 image header is not found, the boot process rolls back to a
GPT partition look-up scheme.
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: I85a87dc9ae7f2b915ed8e584be80f4b3588efc48
Add basic SDEI support, implementing the software event 0 only for now.
This already allows hypervisors like Jailhouse to use SDEI for internal
signaling while passing the GICC through to the guest (see also IMX8).
With SDEI on, we overrun the SRAM and need to stay in DRAM. So keep SDEI
off by default.
Co-developed-by: Angelo Ruocco <angeloruocco90@gmail.com>
Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Change-Id: Ic0d71b4ef0978c0a34393f4e3530ed1e24a39ca2
The io_dummy code and function calls are only used in case BL32 is TF-A
SP_min, and not OP-TEE. This code in bl2_io_storage can then be put under
#ifndef AARCH32_SP_OPTEE.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I52787a775160b335f97547203f653419621f5147
STM32MP1 does not use BL1, the loading of BL2 is done by ROM code. It is
then useless to have an entry BL2_IMAGE_ID in the policies.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I464cedf588114d60522433123f8dbef32ae36818
Fix a remainder from early prototyping. OP-TEE as a secure partition
does not need specific SMC function id pass through to EL3.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I2843d1b9a5eb4c966f82790e1655fb569c2de7d4
The UUID strings used in FW_CONFIG DT are not aligned with UUIDs defined
in include/tools_share/firmware_image_package.h for BL32_EXTRA1 and
TRUSTED_KEY_CERT.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I517f8f9311585931f2cb931e0588414da449b694
The UART code for the A3K platform assumes that UART parent clock rate
is always 25 MHz. This is incorrect, because the xtal clock can also run
at 40 MHz (this is board specific).
The frequency of the xtal clock is determined by a value on a strapping
pin during SOC reset. The code to determine this frequency is already in
A3K's comphy driver.
Move the get_ref_clk() function from the comphy driver to a separate
file and use it for UART parent clock rate determination.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I8bb18a2d020ef18fe65aa06ffa4ab205c71be92e
Macros PLAT_MARVELL_BOOT_UART* and PLAT_MARVELL_CRASH_UART* are defined
to same values. De-duplicate them into PLAT_MARVELL_UART* macros.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iae5daf7cad6a971e6f3dbe561df3d0174106ca7f
Macros PLAT_MARVELL_BL31_RUN_UART* are not used since commit
d7c4420cb8 ("plat/marvell: Migrate to multi-console API").
Remove them.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I5ec959ef4de87dcfb332c017ad2599bf8af6ffc3
Morello exhibits the behavior similar to Juno wherein CNTBaseN.CNTFRQ
can be written but does not reflect the value of the CNTFRQ register
in CNTCTLBase frame. This doesn't follow ARM ARM in that the value
updated in CNTCTLBase.CNTFRQ is not reflected in CNTBaseN.CNTFRQ.
Hence enable the workaround (applied to Juno) for Morello that updates
the CNTFRQ register in the Non Secure CNTBaseN frame.
Change-Id: Iabe53bf3c25152052107e08321323e4bde5fbef4
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
Add support for XCK26 silicon which is available on SOM board.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: Ic98213328702903af8a79f487a2868f3e6d60338
This patch renames the Matterhorn, Matterhorn ELP, and Klein CPUs to
Cortex A710, Cortex X2, and Cortex A510 respectively.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I056d3114210db71c2840a24562b51caf2546e195
UART parent clock is by default the platform's xtal clock, which is
25 MHz.
The value defined in the driver, though, is 25.8048 MHz. This is a hack
for the suboptimal divisor calculation
Divisor = UART clock / (16 * baudrate)
which does not use rounding division, resulting in a suboptimal value
for divisor if the correct parent clock rate was used.
Change the code for divisor calculation to
Divisor = Round(UART clock / (16 * baudrate))
and change the parent clock rate value to 25 MHz.
The final UART divisor for default baudrate 115200 is not affected by
this change.
(Note that the parent clock rate should not be defined via a macro,
since the xtal clock can also be 40 MHz. This is outside of the scope of
this fix, though.)
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iaa401173df87aec94f2dd1b38a90fb6ed0bf0ec6
Create a dedicated static struct mmc_device_info mmc_info mmc_info
instead of having this in stack.
A boot issue has been seen on some platform when applying patch [1].
[1] 13f3c5166f ("mmc:prevent accessing to the released space in case of wrong usage")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Iba0424a5787f9e510a60696d4033db1b49b243b2
Use the macros that are now defined in include/lib/smccc.h.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ibe3c17acd2482b7779318c8a922a138dcace5554
Use the macros that are now defined in include/lib/smccc.h.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ie1dbc54569086f6a74206b873fee664b4cdeea36
Use the macros that are now defined in include/lib/smccc.h.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I688a76277b729672835d51fafb68d1d6205b6ae4
The JEDEC information for STMicroelectronics is:
JEDEC_ST_MFID U(0x20)
JEDEC_ST_BKID U(0x0)
And rely on platform functions to get chip IP and revision.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I4fa4ac8bb5583b1871b768decc9fe08e8966ff54
Three functions are exported to get SoC version, SoC device ID, and SoC
name. Those functions are based on reworked existing static functions.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I1f3949062bb488286a9e7a38ffcd1457953dac56
The SGI/RD platforms have been using PSCI state ID format as defined in
PSCI version prior to 1.0. This is being changed and the PSCI extended
state ID format as defined in PSCI version 1.1 is being adapted. In
addition to this, the use of Arm recommended PSCI state ID encoding is
enabled as well.
Change-Id: I2be8a9820987a96b23f4281563b6fa22db48fa5f
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
Update idle flow in case of last read command timeout.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Change-Id: Idb0552d70d59b23822c38269d0fa9fe9ac0d6975
MTK display port mute/unmute control registers need to be
set in secure world.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Iec73650e937bd20e25c18fa28d55ae29e68b10d3
Use proper offset for IPI data based on offset for IPI0
channel.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Change-Id: I3070517944dd353c3733aa595df0da030127751a
The PCIe root port is outside of the current RPi
MMIO regions, so we need to adjust the address map.
Given much of the code depends on the legacy IOBASE
lets separate that from the actual MMIO begin/end.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Change-Id: Id65460ae58556bd8826dba08bbad79953e2a7c0b
Add APU iommap settings for reviser, apu_ao and
devapc control wrapper.
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
Change-Id: Ie8e6a197c0f440f9e4ee8101202283a2dbf501a6
In iMX8MM it is possible to have two copies of bootloader in
SD/eMMC and switch between them. The switch is triggered either
by the BootROM in case the bootloader image is faulty OR can be
enforced by the user. To trigger that switch the
PERSIST_SECONDARY_BOOT bit should be set in GPR10 SRC register.
As the bit is retained after WARM reset, that permits to control
BootROM behavior regarding what boot image it will boot after
reset: primary or secondary.
This is useful for reliable bootloader A/B updates, as it permits
switching between two copies of bootloader at different offsets of
the same storage.
If the PERSIST_SECONDARY_BOOT is 0, the boot ROM uses address
0x8400 for the primary image. If the PERSIST_SECONDARY_BOOT is 1,
the boot ROM reads that secondary image table from address 0x8200
on the boot media and uses the address specified in the table for
the secondary image.
Secondary Image Table contains the sector of secondary bootloader
image, exluding the offset to that image (explained below in the
note). To generate the Secondary Image Table, use e.g.:
$ printf '\x0\x0\x0\x0\x0\x0\x0\x0\x33\x22\x11'
'\x00\x00\x10\x0\x0\x00\x0\x0\x0'
> /tmp/sit.bin
$ hexdump -vC /tmp/sit.bin
00000000 00 00 00 00
00000004 00 00 00 00
00000008 33 22 11 00 <--- This is the "tag"
0000000c 00 10 00 00 <--- This is the "firstSectorNumber"
00000010 00 00 00 00
You can also use NXP script from [1][2] imx-mkimage tool for
SIT generation. Note that the firstSectorNumber is NOT the offset
of the IVT, but an offset of the IVT decremented by Image Vector
Table offset (Table 6-25. Image Vector Table Offset and Initial
Load Region Size for iMX8MM/MQ), so for secondary SPL copy at
offset 0x1042 sectors, firstSectorNumber must be 0x1000
(0x42 sectors * 512 = 0x8400 bytes offset).
In order to test redundant boot board should be closed and
SD/MMC manufacture mode disabled, as secondary boot is not
supported in the SD/MMC manufacture mode, which can be disabled
by blowing DISABLE_SDMMC_MFG (example for iMX8MM):
> fuse prog -y 2 1 0x00800000
For additional details check i.MX 8M Mini Apllication Processor
Reference Manual, 6.1.5.4.5 Redundant boot support for
expansion device chapter.
[1] https://source.codeaurora.org/external/imx/imx-mkimage/
[2] scripts/gen_sit.sh
Change-Id: I0a5cea7295a4197f6c89183d74b4011cada52d4c
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Added support for HW computed CRC using Arm ACLE intrinsics.
These are built-in intrinsics available for ARMv8.1-A, and
onwards.
These intrinsics are enabled via '-march=armv8-a+crc' compile
switch for ARMv8-A (supports CRC instructions optionally).
HW CRC support is enabled unconditionally in BL2 for all Arm
platforms.
HW CRC calculation is verified offline to ensure a similar
result as its respective ZLib utility function.
HW CRC calculation support will be used in the upcoming
firmware update patches.
Change-Id: Ia2ae801f62d2003e89a9c3e6d77469b5312614b3
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Disable non-invasive debug of secure state for Juno
in release builds. This makes sure that PMU counts
only Non-secure events.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I0d1c3f96f3b4e48360a7211ae55851d65d291025
This patch adds support for the crypto and secure storage secure
partitions for the Total Compute platform. These secure partitions
have to be managed by Hafnium executing at S-EL2
Change-Id: I2df690e3a99bf6bf50e2710994a905914a07026e
Signed-off-by: Davidson K <davidson.kumaresan@arm.com>
AMU counters are used for monitoring the CPU performance. RD-V1-MC
platform has architected AMU available for each core. Enable the use of
AMU by non-secure OS for supporting the use of counters for processor
performance control (ACPI CPPC).
Change-Id: I33be594cee669e7f4031e5e5a371eec7c7451030
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
on i.MX8MP A1 silicon, the OCRAM space is extended to 512K + 64K,
currently, OCRAM @0x960000-0x980000 is reserved for BL31, it will
leave the last 64KB in non-continuous space. To provide a continuous
384KB + 64KB space for generic use, so move the BL31 space to
0x970000-0x990000 range.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I96d572fc0f87f05a60f55e0552a68b6e70f8e7f4
the 'always_on' member should be initialized from 'on'.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I5746ff40075b4fcda2ac7d04a8d7f1269af17e91
* changes:
stm32mp1: enable PIE for BL32
stm32mp1: set BL sizes regardless of flags
Add PIE support for AARCH32
Avoid the use of linker *_SIZE__ macros
Added GPT parser support in BL2 for Arm platforms to get the entry
address and length of the FIP in the GPT image.
Also, increased BL2 maximum size for FVP platform to successfully
compile ROM-enabled build with this change.
Verified this change using a patch:
https://review.trustedfirmware.org/c/ci/tf-a-ci-scripts/+/9654
Change-Id: Ie8026db054966653b739a82d9ba106d283f534d0
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Edward-JW Yang
Elly Chiang
Tinghan Shen
Daniel Boulby
Mark Dykes
Patrick Delaunay
Yann Gautier
Manish Pandey
Olivier Deprez
Sandrine Bailleux
Arunachalam Ganapathy
Jiafei Pan
Patrick Georgi
Yann Gautier
Nicolas Le Bayon
Madhukar Pappireddy
Venkatesh Yadav Abbarapu
Igor Opaniuk
Michal Simek
Peng Fan
Vyacheslav Yurkov
Jan Kiszka
Pali Rohár
Manoj Kumar
Jiaxin Yu
johpow01
Pranav Madhu
Hsin-Hsiung Wang
Flora Fu
Rex-BC Chen
Rajan Vaja
Jeremy Linton
Manish V Badarkhe
Zelalem
Davidson K
Jacky Bai