Added a public function to read blocks from a current boot partition.
switch between partitions has to respect eMMC partition switch timing.
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: I55b0c910314253e5647486609583fd290dadd30a
The UART code for the A3K platform assumes that UART parent clock rate
is always 25 MHz. This is incorrect, because the xtal clock can also run
at 40 MHz (this is board specific).
The frequency of the xtal clock is determined by a value on a strapping
pin during SOC reset. The code to determine this frequency is already in
A3K's comphy driver.
Move the get_ref_clk() function from the comphy driver to a separate
file and use it for UART parent clock rate determination.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I8bb18a2d020ef18fe65aa06ffa4ab205c71be92e
This patch renames the Matterhorn, Matterhorn ELP, and Klein CPUs to
Cortex A710, Cortex X2, and Cortex A510 respectively.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I056d3114210db71c2840a24562b51caf2546e195
Use the macros that are now defined in include/lib/smccc.h.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I688a76277b729672835d51fafb68d1d6205b6ae4
The definitions of SMCCC_ARCH_SOC_ID SoC version return bits are defined
in SMC Calling Convention [1]. Add the masks and shifts for JEP-106 bank
index, JEP-106 identification code, and Implementation defined SoC ID.
Add a macro to easily set JEP-106 fields.
[1] https://developer.arm.com/documentation/den0028/latest/
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Iecbd09f6de6728de89dc746d2d1981a5a97a8ab7
Add constants, structures and build definition for the
new standard SMCCC PCI conduit. These are documented
in DEN0115A.
https://developer.arm.com/documentation/den0115/latest
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Change-Id: If667800a26b9ae88626e8d895674c9c2e8c09658
Added support for HW computed CRC using Arm ACLE intrinsics.
These are built-in intrinsics available for ARMv8.1-A, and
onwards.
These intrinsics are enabled via '-march=armv8-a+crc' compile
switch for ARMv8-A (supports CRC instructions optionally).
HW CRC support is enabled unconditionally in BL2 for all Arm
platforms.
HW CRC calculation is verified offline to ensure a similar
result as its respective ZLib utility function.
HW CRC calculation support will be used in the upcoming
firmware update patches.
Change-Id: Ia2ae801f62d2003e89a9c3e6d77469b5312614b3
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Disable non-invasive debug of secure state for Juno
in release builds. This makes sure that PMU counts
only Non-secure events.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I0d1c3f96f3b4e48360a7211ae55851d65d291025
This patch adds setting MDCR_EL3.MCCD in 'el3_arch_init_common'
macro to disable cycle counting by PMCCNTR_EL0 in EL3 when
FEAT_PMUv3p7 is implemented. This fixes failing test
'Leak PMU CYCLE counter values from EL3 on PSCI suspend SMC'
on FVP models with 'has_v8_7_pmu_extension' parameter set to
1 or 2.
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Change-Id: I2ad3ef501b31ee11306f76cb5a61032ecfd0fbda
Handle calls to the FFA_SPM_ID_GET interface. If FFA_SPM_ID_GET is
invoked from the non-secure physical FF-A instance, return the SPMC id
(defined in the SPMC manifest). If FFA_SPM_ID_GET is invoked from
the secure physical FF-A instance (e.g. the SPMC), return the SPMD id.
Change-Id: Id6d4e96b1da2510386d344e09c4553dba01227ec
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
* changes:
stm32mp1: enable PIE for BL32
stm32mp1: set BL sizes regardless of flags
Add PIE support for AARCH32
Avoid the use of linker *_SIZE__ macros
Added GPT parser support in BL2 for Arm platforms to get the entry
address and length of the FIP in the GPT image.
Also, increased BL2 maximum size for FVP platform to successfully
compile ROM-enabled build with this change.
Verified this change using a patch:
https://review.trustedfirmware.org/c/ci/tf-a-ci-scripts/+/9654
Change-Id: Ie8026db054966653b739a82d9ba106d283f534d0
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
NOTE: Breaking change to the way UUIDs are stored in the DT
Currently, UUIDs are stored in the device tree as
sequences of 4 integers. There is a mismatch in endianness
between the way UUIDs are represented in memory and the way
they are parsed from the device tree. As a result, we must either
store the UUIDs in little-endian format in the DT (which means
that they do not match up with their string representations)
or perform endianness conversion after parsing them.
Currently, TF-A chooses the second option, with unwieldy
endianness-conversion taking place after reading a UUID.
To fix this problem, and to make it convenient to copy and
paste UUIDs from other tools, change to store UUIDs in string
format, using a new wrapper function to parse them from the
device tree.
Change-Id: I38bd63c907be14e412f03ef0aab9dcabfba0eaa0
Signed-off-by: David Horstmann <david.horstmann@arm.com>
TF-A does not have the capability to read UUIDs in string form
from the device tree. This capability is useful for readability,
so add a wrapper function, fdtw_read_uuid() to parse UUIDs from
the DT.
This function should parse a string of the form:
"aabbccdd-eeff-4099-8877-665544332211"
to the byte sequence in memory:
[aa bb cc dd ee ff 40 99 88 77 66 55 44 33 22 11]
Change-Id: I99a92fbeb40f4f4713f3458b36cb3863354d2bdf
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Replaced PLAT_ARM_FIP_BASE and PLAT_ARM_FIP_MAX_SIZE macro with a
generic name PLAT_ARM_FLASH_IMAGE_BASE and PLAT_ARM_FLASH_IMAGE_MAX_SIZE
so that these macros can be reused in the subsequent GPT based support
changes.
Change-Id: I88fdbd53e1966578af4f1e8e9d5fef42c27b1173
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This patch fixes static checks errors reported for missing copyright in
`include/dt-bindings/interrupt-controller/arm-gic.h` and the include
order of header files in `.dts` and `.dtsi` files.
Change-Id: I2baaf2719fd2c84cbcc08a8f0c4440a17a9f24f6
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Chris Kay <chris.kay@arm.com>
The `arm-gic.h` file distributed by the Linux kernel is disjunctively
dual-licensed under the GPL-2.0 or MIT licenses, but the BSD-3-Clause
license has been applied in violation of the requirements of both
licenses. This change ensures the file is correctly licensed under the
terms of the MIT license, and that we comply with it by distributing a
copy of the license text.
Change-Id: Ie90066753a5eb8c0e2fc95ba43e3f5bcbe2fa459
Signed-off-by: Chris Kay <chris.kay@arm.com>
Only BL32 (SP_min) is supported at the moment, BL1 and BL2_AT_EL3 are just
stubbed with _pie_fixup_size=0.
The changes are an adaptation for AARCH32 on what has been done for
PIE support on AARCH64.
The RELA_SECTION is redefined for AARCH32, as the created section is
.rel.dyn and the symbols are .rel*.
Change-Id: I92bafe70e6b77735f6f890f32f2b637b98cf01b9
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The use of end addresses is preferred over the size of sections.
This was done for some AARCH64 files for PIE with commit [1],
and some extra explanations can be found in its commit message.
Align the missing AARCH64 files.
For AARCH32 files, this is required to prepare PIE support introduction.
[1] f1722b693d ("PIE: Use PC relative adrp/adr for symbol reference")
Change-Id: I8f1c06580182b10c680310850f72904e58a54d7d
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The Arm Generic Timer specification mandates that the
interrupt associated with each timer is low level triggered,
see:
Arm Cortex-A76 Core:
"Each timer provides an active-LOW interrupt output to the SoC."
Arm Cortex-A53 MPCore Processor:
"It generates timer events as active-LOW interrupt outputs and
event streams."
The following files in fdts\
fvp-base-gicv3-psci-common.dtsi
fvp-base-gicv3-psci-aarch32-common.dtsi
fvp-base-gicv2-psci-aarch32.dts
fvp-base-gicv2-psci.dts
fvp-foundation-gicv2-psci.dts
fvp-foundation-gicv3-psci.dts
describe interrupt types as edge rising
IRQ_TYPE_EDGE_RISING = 0x01:
interrupts = <1 13 0xff01>,
<1 14 0xff01>,
<1 11 0xff01>,
<1 10 0xff01>;
, see include\dt-bindings\interrupt-controller\arm-gic.h:
which causes Linux to generate the warnings below:
arch_timer: WARNING: Invalid trigger for IRQ5, assuming level low
arch_timer: WARNING: Please fix your firmware
This patch adds GIC_CPU_MASK_RAW macro definition to
include\dt-bindings\interrupt-controller\arm-gic.h,
modifies interrupt type to IRQ_TYPE_LEVEL_LOW and
makes use of type definitions in arm-gic.h.
Change-Id: Iafa2552a9db85a0559c73353f854e2e0066ab2b9
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
ELP processors can sometimes have different MIDR values or features so
we are adding the "_arm" suffix to differentiate the reference
implementation from other future versions.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ieea444288587c7c18a397d279ee4b22b7ad79e20
By default the Arm Ethos-N NPU will boot up in secure mode. In this mode
the non-secure world cannot access the registers needed to use the NPU.
To still allow the non-secure world to use the NPU, a SiP service has
been added that can delegate non-secure access to the registers needed
to use it.
Only the HW_CONFIG for the Arm Juno platform has been updated to include
the device tree for the NPU and the platform currently only loads the
HW_CONFIG in AArch64 builds.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I65dfd864042ed43faae0a259dcf319cbadb5f3d2
Move efuse definitions to a separate header file for later
usage with other FW modules.
Change-Id: I2e9465f760d0388c8e5863bc64a4cdc57de2417f
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/47313
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Yi Guo <yi.guo@cavium.com>
The SCMI power domain protocol in firmware has been updated to v2.0,
thus update the corresponding version in TF-A too.
Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com>
Change-Id: If3920ff71136dce94b2780e29a47f24aa09876c0
Enable basic support for QEMU "max" CPU.
The "max" CPU does not attampt to emulate any specific CPU, but rather
just enables all the functions emulated by QEMU.
Change-Id: I69c212932ef61433509662d0fefbabb1e9e71cf2
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Since there is a secure and non-secure version of the timer registers
there is no need to preserve their context in EL3.
With that, following registers were removed from EL3 save/restore
routine:
cnthps_ctl_el2
cnthps_tval_el2
cnthps_cval_el2
cnthvs_ctl_el2
cnthvs_tval_el2
cnthvs_cval_el2
cnthp_ctl_el2
cnthp_cval_el2
cnthp_tval_el2
cnthv_ctl_el2
cnthv_cval_el2
cnthv_tval_el2
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: I6e2fc09c74a7375c4fccc11f12af4e39e6dc616b
The legacy console is gone. Re-add DCC console support based
on the multi-console framework.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: Ia8388721093bc1be3af40974530d7c9a9ae5f43e
Broadcom I2C controller driver. Follwoing API's are supported:-
- i2c_init() Intialize ethe I2C controller
- i2c_probe()
- i2c_set_bus_speed() Set the I2C bus speed
- i2c_get_bus_speed() Get the current bus speed
- i2c_recv_byte() Receive one byte of data.
- i2c_send_byte() Send one byteof data
- i2c_read_byte() Read single byte of data
- i2c_read() Read multiple bytes of data
- i2c_write_byte Write single byte of data
- i2c_write() Write multiple bytes of data
This driver is verified by reading the DDR SPD data.
Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com>
Change-Id: I2d7fe53950e8b12fab19d0293020523ff8b74e13
NXP SMMU driver API for NXP SoC.
- Currently it supports by-passing SMMU, called only when NXP CAAM
is enabled.
- (TBD) AMQ based SMMU access control: Access Management Qualifiers (AMQ)
advertised by a bus master for a given transaction.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I23a12928ddedb1a2cf4b396606e35c67e016e331
Flexspi driver now introduces read/write/erase APIs for complete flash
size, FAST-READ are by default used and IP bus is used for erase, read
and write using flexspi APIs.
Framework layer is currently embedded in driver itself using flash_info
defines.
Test cases are also added to confirm flash functionality currently under
DEBUG flag.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Change-Id: I755c0f763f6297a35cad6885f84640de50f51bb0
NXP Timer Apis are based on:
- drivers/delay_timer
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I2cbccf4c082a10affee1143390905b9cc99c3382
Generic framework is added to include platform defined UUID.
This framework is added for the following:
- All NXP SoC based platforms needed additional fip-fuse.bin
- NXP SoC lx2160a based platforms requires additional fip-ddr.bin
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ibe05d9c596256e34077287a490dfcd5b731ef2cf
Conditional definition for the macro MAX_NUMBER_IDS.
This will allow to update this definition by the platform
specific implementation.
Since, NXP SoC lx2160a based platforms requires additional
FIP DDR to be loaded before initializing the DDR.
It requires addition of defines for DDR image IDs.
A dedicated header plat_tbbr_img_def.h is added to the platform
folder - plat/nxp/common/include/default/
Inclusion of this header file will depend on the compile time
flag PLAT_TBBR_IMG_DEF.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I4faba74dce578e2a34acbc8915ff75d7b8368cee
Incorrect value is picked for TF_MBEDTLS_USE_RSA defination,
even if the TF_MBEDTLS_RSA is enabled.
Due to which PK_DER_LEN is defined incorrectly.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I2ca4ca121e0287b88ea689c885ddcd45a34a3e91
Changes to 'tools/cert_create' folder, to include platform defined
certificates, keys, and extensions.
NXP SoC lx2160a : based platforms requires additional
FIP DDR to be loaded before initializing the DDR.
To enable chain of trust on these platforms, FIP DDR
image needs to be authenticated, additionally.
Platform specific folder 'tools/nxp/cert_create_helper'
is added to support platform specific macros and definitions.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I4752a30a9ff3aa1d403e9babe3a07ba0e6b2bf8f
A new function tzc400_it_handler() is created to manage TZC400
interrupts. The required helpers to read and clear interrupts are added
as well.
In case DEBUG is enabled, more information about the faulty access
(address, NSAID, type of access) is displayed.
Change-Id: Ie9ab1c199a8f12b2c9472d7120efbdf35711284a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The UEFI specification details the represenatation
for the EFI_GUID type. Add this representation to the
uuid_helper_t union type so that GUID definitions
can be shared verbatim between UEFI and TF-A header
files.
Change-Id: Ie44ac141f70dd0025e186581d26dce1c1c29fce6
Signed-off-by: Tomas Pilar <tomas@nuviainc.com>
The speculation barrier feature (`FEAT_SB`) was introduced with and
made mandatory in the Armv8.5-A extension. It was retroactively made
optional in prior extensions, but the checks in our code-base do not
reflect that, assuming that it is only available in Armv8.5-A or later.
This change introduces the `ENABLE_FEAT_SB` definition, which derives
support for the `sb` instruction in the assembler from the feature
flags passed to it. Note that we assume that if this feature is enabled
then all the cores in the system support it - enabling speculation
barriers for only a subset of the cores is unsupported.
Signed-off-by: Chris Kay <chris.kay@arm.com>
Change-Id: I978ed38829385b221b10ba56d49b78f4756e20ea
Remove the former impdef SPMD service for SPMC entry point
registration. Replace with FFA_SECONDARY_EP_REGISTER ABI
providing a single entry point address into the SPMC for
primary and secondary cold boot.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I067adeec25fc12cdae90c15a616903b4ac4d4d83
ARMv8.6 adds virtual offset registers to support virtualization of the
event counters in EL1 and EL0. This patch enables support for this
feature in EL3 firmware.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I7ee1f3d9f554930bf5ef6f3d492e932e6d95b217
* changes:
plat/marvell/armada: cleanup MSS SRAM if used for copy
plat/marvell: cn913x: allow CP1/CP2 mapping at BLE stage
plat/marvell/armada/common/mss: use MSS SRAM in secure mode
include/drivers/marvell/mochi: add detection of secure mode
plat/marvell: fix SPD handling in dram port
marvell: drivers: move XOR0/1 DIOB from WIN 0 to 1
drivers/marvell/mochi: add support for cn913x in PCIe EP mode
drivers/marvell/mochi: add missing stream IDs configurations
plat/marvell/armada/a8k: support HW RNG by SMC
drivers/rambus: add TRNG-IP-76 driver
The Juno Trusted Entropy Source has a bias, which makes the generated
raw numbers fail a FIPS 140-2 statistic test.
To improve the quality of the numbers, we can use the CPU's CRC
instructions, which do a decent job on conditioning the bits.
This adds a *very* simple version of arm_acle.h, which is typically
provided by the compiler, and contains the CRC instrinsics definitions
we need. We need the original version by using -nostdinc.
Change-Id: I83d3e6902d6a1164aacd5060ac13a38f0057bd1a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Add Rambus (InsideSecure) TRNG-IP-76 HW RNG driver.
This IP is part of Marvell Armada CP110/CP115 die integrated
to Armada 7k/8K/CN913x SoCs
Change-Id: I9c5f510ad6728c7ed168da43d85b19d5852cd873
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
The filters parameter passed to tzc400_configure_region() is supposed
to be filter bit flag without bit shift, so the macros
TZC_400_REGION_ATTR_FILTER_BIT and TZC_400_REGION_ATTR_FILTER_BIT_ALL
should always construct the value without any shift.
It is not a functional issue for TZC_REGION_ATTR_F_EN_SHIFT is lucky
to be 0.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I5d363c462b8517256523f637e670eefa56722afd
This adds the TRNG Firmware Interface Service to the standard
service dispatcher. This includes a method for dispatching entropy
requests to platforms and includes an entropy pool implementation to
avoid dropping any entropy requested from the platform.
Change-Id: I71cadb3cb377a507652eca9e0d68714c973026e9
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
In DDR controller PWRTMG register, the mask for field SELFREF_TO_X32 is
wrong. This field is from bit 16 to 23.
Change-Id: Id336fb08c88f0a153df186dd819e41af72febb88
Signed-off-by: Yann Gautier <yann.gautier@st.com>
From commit: 21571b1d140ae7bb44e94c0afba2ec61456b275b
The coding guidelines[1] in TF-A forbid the use of ato*() functions
in favour of strto*(). However, the TF-A libc does not provide an
implementation of strto*(), making this rule impossible to satisfy.
Also made small changes to fit into TF-A project. Added the source
files to the libc makefile
[1] https://trustedfirmware-a.readthedocs.io/en/latest/process/coding-guidelines.html#libc-functions-that-are-banned-or-to-be-used-with-caution
Change-Id: I2e94a0b227ec39f6f4530dc50bb477999d27730f
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
From commit: 21571b1d140ae7bb44e94c0afba2ec61456b275b
The coding guidelines[1] in TF-A forbid the use of ato*() functions
in favour of strto*(). However, the TF-A libc does not provide an
implementation of strto*(), making this rule impossible to satisfy.
Also made small changes to fit into TF-A project. Added the source
files to the libc makefile
[1] https://trustedfirmware-a.readthedocs.io/en/latest/process/coding-guidelines.html#libc-functions-that-are-banned-or-to-be-used-with-caution
Change-Id: I9cb581574d46de73c3d6917ebf78935fc5ac075a
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
From commit: 21571b1d140ae7bb44e94c0afba2ec61456b275b
The coding guidelines[1] in TF-A forbid the use of ato*() functions
in favour of strto*(). However, the TF-A libc does not provide an
implementation of strto*(), making this rule impossible to satisfy.
Also made small changes to fit into TF-A project. Added the source
files to the libc makefile
[1] https://trustedfirmware-a.readthedocs.io/en/latest/process/coding-guidelines.html#libc-functions-that-are-banned-or-to-be-used-with-caution
Change-Id: I8c3b92751d1ce226c966f7c81fedd83f0846865e
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
From commit: 21571b1d140ae7bb44e94c0afba2ec61456b275b
The coding guidelines[1] in TF-A forbid the use of ato*() functions
in favour of strto*(). However, the TF-A libc does not provide an
implementation of strto*(), making this rule impossible to satisfy.
Also made small changes to fit into TF-A project. Added the source
files to the libc makefile
[1] https://trustedfirmware-a.readthedocs.io/en/latest/process/coding-guidelines.html#libc-functions-that-are-banned-or-to-be-used-with-caution
Change-Id: Ica95bf5da722913834fe90bf3fe743aa34e01e80
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
For SoCs which do not implement RAS, use DSB as a barrier to
synchronize pending external aborts at the entry and exit of
exception handlers. This is needed to isolate the SErrors to
appropriate context.
However, this introduces an unintended side effect as discussed
in the https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3440
A summary of the side effect and a quick workaround is provided as
part of this patch and summarized here:
The explicit DSB at the entry of various exception vectors in BL31
for handling exceptions from lower ELs can inadvertently trigger an
SError exception in EL3 due to pending asyncrhonouus aborts in lower
ELs. This will end up being handled by serror_sp_elx in EL3 which will
ultimately panic and die.
The way to workaround is to update a flag to indicate if the exception
truly came from EL3. This flag is allocated in the cpu_context
structure. This is not a bullet proof solution to the problem at hand
because we assume the instructions following "isb" that help to update
the flag (lines 100-102 & 139-141) execute without causing further
exceptions.
Change-Id: I4d345b07d746a727459435ddd6abb37fda24a9bf
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
This patch does not change code, it only updates comments and macro name
for 6th bit of Status Register. So TF-A binary stay same.
6th bit of the Status Register is named TX EMPTY and is set to 1 when both
Transmitter Holding Register (THR) or Transmitter Shift Register (TSR) are
empty. It is when all characters were already transmitted.
There is also TX FIFO EMPTY bit in the Status Register which is set to 1
only when THR is empty.
In both console_a3700_core_init() and console_a3700_core_flush() functions
we should wait until both THR and TSR are empty therefore we should check
6th bit of the Status Register.
So current code is correct, just had misleading macro names and comments.
This change fixes this "documentation" issue, fixes macro name for 6th bit
of the Status Register and also updates comments.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I19e4e7f53a90bcfb318e6dd1b1249b6cbf81c4d3
Implementation is simple, just check if there is a pending character in
RX FIFO via RXRDY bit of Status Register and if yes, read it from
UART_RX_REG register.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I226b6e336f44f5d0ca8dcb68e49a68e8f2f49708
Add ISAR0 feature register read helper, location
of FEAT_RNG bits, feature support helper and the
rndr/rndrrs register read helpers.
Signed-off-by: Tomas Pilar <tomas@nuviainc.com>
Change-Id: I2a785a36f62a917548e55892ce92fa8b72fcb99d
Cortex A78 erratum 1951500 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r1p1. The workaround is to insert a DMB ST before
acquire atomic instructions without release semantics. This workaround
works on revisions r1p0 and r1p1, in r0p0 there is no workaround.
SDEN can be found here:
https://documentation-service.arm.com/static/5fb66157ca04df4095c1cc2e
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I47610cee75af6a127ea65edc4d5cffc7e6a2d0a3
Cortex A78 erratum 1941498 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r1p1. The workaround is to set bit 8 in the ECTLR_EL1
register, there is a small performance cost (<0.5%) for setting this bit.
SDEN can be found here:
https://documentation-service.arm.com/static/5fb66157ca04df4095c1cc2e
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I959cee8e3d46c1b84ff5e4409ce5945e459cc6a9
Write char if fifo is empty. If this is done like this all chars are
printed. Because origin code just put that chars to fifo and in case of
reset messages were missing.
Before this change chars are put to fifo and only check before adding if
fifo is full. The patch is changing this logic that it is adding char only
when fifo is empty to make sure that in case of reset (by another SW for
example) all chars are printed. Maybe one char can be missed but for IP
itself it is much easier to send just one char compare to full fifo.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: Ic24c2c1252bce24be2aed68ee29477ca4a549e5f
* changes:
allwinner: Use RSB for the PMIC connection on H6
allwinner: Return the PMIC to I2C mode after use
allwinner: Always use a 3MHz RSB bus clock
Increase SP max size for latest OP-TEE build with debug and
stats enabled.
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: I4593884e0deb39ada10009f6876d815136f8ee65
This gives the rich OS the flexibility to choose between I2C and RSB
communication. Since a runtime address can only be assigned once after
entering RSB mode, it also lets the rich OS choose any runtime address.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Id49c124c5e925985fc31c0ba38c7fb6c941aafa8
If FEAT_PMUv3 is implemented and PMEVTYPER<n>(_EL0).MT bit is implemented
as well, it is possible to control whether PMU counters take into account
events happening on other threads.
If FEAT_MTPMU is implemented, EL3 (or EL2) can override the MT bit
leaving it to effective state of 0 regardless of any write to it.
This patch introduces the DISABLE_MTPMU flag, which allows to diable
multithread event count from EL3 (or EL2). The flag is disabled
by default so the behavior is consistent with those architectures
that do not implement FEAT_MTPMU.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: Iee3a8470ae8ba13316af1bd40c8d4aa86e0cb85e
Vyacheslav Yurkov
Pali Rohár
Madhukar Pappireddy
johpow01
Yann Gautier
Jeremy Linton
Mark Dykes
Manish V Badarkhe
Zelalem
Alexei Fedorov
Daniel Boulby
Olivier Deprez
Manish Pandey
David Horstmann
Chris Kay
bipin.ravi
Yann Gautier
Mikael Olsson
Konstantin Porotchkin
Nicola Mazzucato
Leif Lindholm
Max Shvetsov
Venkatesh Yadav Abbarapu
Sandrine Bailleux
Bharat Gooty
Pankaj Gupta
Kuldeep Singh
Tomas Pilar
Usama Arif
Andre Przywara
Heyi Guo
Jimmy Brisson
Peng Fan
Michal Simek
Arunachalam Ganapathy
Samuel Holland
Javier Almansa Sobrino