This patch provides declaration and definition of new GICv3 driver
API: gicv3_rdistif_probe().This function delegates the responsibility
of discovering the corresponding Redistributor base frame to each CPU
itself. It is a modified version of gicv3_rdistif_base_addrs_probe()
and is executed by each CPU in the platform unlike the previous
approach in which only the Primary CPU did the discovery of all the
Redistributor frames for every CPU.
The flush operations as part of gicv3_driver_init() function are
made necessary even for platforms with WARMBOOT_ENABLE_DCACHE_EARLY
because the GICv3 driver data structure contents are accessed by CPU
with D-Cache turned off during power down operations.
Change-Id: I1833e81d3974b32a3e4a3df4766a33d070982268
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
This BSEC service is a platform specific service. Implementation
moved to the platform part.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I1f70ed48a446860498ed111acce01187568538c9
The driver manages the HASH processor IP on STM32MP1
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I3b67c80c16d819f86b951dae29a6c465e51ad585
The block size of some storage device is 4096-byte long, such as UFS. But
PARTITION_BLOCK_SIZE is defined as 512-byte long. So replace it by
PLAT_PARTITION_BLOCK_SIZE. Make it configurable in platform.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Change-Id: Iada05f7c646d0a0f2c0d3b8545540b3cb7153de3
If a firmware component like TF-A reserves special memory regions for
its own or secure payload services, it should announce the location and
size of those regions to the non-secure world. This will avoid
disappointment when some rich OS tries to acccess this memory, which
will likely end in a crash.
The traditional way of advertising reserved memory using device tree is
using the special memreserve feature of the device tree blob (DTB).
However by definition those regions mentioned there do not prevent the
rich OS to map this memory, which may lead to speculative accesses to
this memory and hence spurious bus errors.
A safer way of carving out memory is to use the /reserved-memory node as
part of the normal DT structure. Besides being easier to setup, this
also defines an explicit "no-map" property to signify the secure-only
nature of certain memory regions, which avoids the rich OS to
accidentally step on it.
Add a helper function to allow platform ports to easily add a region.
Change-Id: I2b92676cf48fd3bdacda05b5c6b1c7952ebed68c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
To allow sharing the driver between the RPi3 and RPi4, move the random
number generator driver into the generic driver directory.
Change-Id: Iae94d7cb22c6bce3af9bff709d76d4caf87b14d1
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The QEMU platform port scans its device tree to advertise PSCI as the
CPU enable method. It does this by scanning *every* node in the DT and
check whether its compatible string starts with "arm,cortex-a". Then it
sets the enable-method to PSCI, if it doesn't already have one.
Other platforms might want to use this functionality as well, so let's
move it out of the QEMU platform directory and make it more robust by
fixing some shortcomings:
- A compatible string starting with a certain prefix is not a good way
to find the CPU nodes. For instance a "arm,cortex-a72-pmu" node will
match as well and is in turn favoured with an enable-method.
- If the DT already has an enable-method, we won't change this to PSCI.
Those two issues will for instance fail on the Raspberry Pi 4 DT.
To fix those problems, we adjust the scanning method:
The DT spec says that all CPU nodes are subnodes of the mandatory
/cpus node, which is a subnode of the root node. Also each CPU node has
to have a device_type = "cpu" property. So we find the /cpus node, then
scan for a subnode with the proper device_type, forcing the
enable-method to "psci".
We have to restart this search after a property has been patched, as the
node offsets might have changed meanwhile.
This allows this routine to be reused for the Raspberry Pi 4 later.
Change-Id: I00cae16cc923d9f8bb96a9b2a2933b9a79b06139
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
To allow sharing the driver between the RPi3 and RPi4, move the mailbox
driver into the generic driver directory.
Change-Id: I463e49acf82b02bf004f3d56482b7791f3020bc0
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
This patch provides the following features and makes modifications
listed below:
- Individual APIAKey key generation for each CPU.
- New key generation on every BL31 warm boot and TSP CPU On event.
- Per-CPU storage of APIAKey added in percpu_data[]
of cpu_data structure.
- `plat_init_apiakey()` function replaced with `plat_init_apkey()`
which returns 128-bit value and uses Generic timer physical counter
value to increase the randomness of the generated key.
The new function can be used for generation of all ARMv8.3-PAuth keys
- ARMv8.3-PAuth specific code placed in `lib\extensions\pauth`.
- New `pauth_init_enable_el1()` and `pauth_init_enable_el3()` functions
generate, program and enable APIAKey_EL1 for EL1 and EL3 respectively;
pauth_disable_el1()` and `pauth_disable_el3()` functions disable
PAuth for EL1 and EL3 respectively;
`pauth_load_bl31_apiakey()` loads saved per-CPU APIAKey_EL1 from
cpu-data structure.
- Combined `save_gp_pauth_registers()` function replaces calls to
`save_gp_registers()` and `pauth_context_save()`;
`restore_gp_pauth_registers()` replaces `pauth_context_restore()`
and `restore_gp_registers()` calls.
- `restore_gp_registers_eret()` function removed with corresponding
code placed in `el3_exit()`.
- Fixed the issue when `pauth_t pauth_ctx` structure allocated space
for 12 uint64_t PAuth registers instead of 10 by removal of macro
CTX_PACGAKEY_END from `include/lib/el3_runtime/aarch64/context.h`
and assigning its value to CTX_PAUTH_REGS_END.
- Use of MODE_SP_ELX and MODE_SP_EL0 macro definitions
in `msr spsel` instruction instead of hard-coded values.
- Changes in documentation related to ARMv8.3-PAuth and ARMv8.5-BTI.
Change-Id: Id18b81cc46f52a783a7e6a09b9f149b6ce803211
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
* changes:
Remove RSA PKCS#1 v1.5 support from cert_tool
Add documentation for new KEY_SIZE option
Add cert_create tool support for RSA key sizes
Support larger RSA key sizes when using MBEDTLS
* changes:
mediatek: mt8183: Support coreboot configuration
mediatek: mt8183: support system reset
mediatek: mt8183: pass platform parameters
mediatek: mt8183: add GPIO driver
mediatek: mt8183: support system off
mediatek: mt8183: support CPU hotplug
mediatek: mt8183: refine GIC driver
Previously, TF-A could not support large RSA key sizes as the
configuration options passed to MBEDTLS prevented storing and performing
calculations with the larger, higher-precision numbers required. With
these changes to the arguments passed to MBEDTLS, TF-A now supports
using 3072 (3K) and 4096 (4K) keys in certificates.
Change-Id: Ib73a6773145d2faa25c28d04f9a42e86f2fd555f
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
Some of the platform (ie. Agilex) make use of CCU IPs which will only be
initialized during bl2_el3_early_platform_setup. Any operation to the
cache beforehand will crash the platform. Hence, this will provide an
option to skip the data cache invalidation upon bl2 entry at EL3
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I2c924ed0589a72d0034714c31be8fe57237d1f06
* changes:
amlogic: Fix includes order
amlogic: Fix header guards
amlogic: Fix prefixes in the SoC specific files
amlogic: Fix prefixes in the PM code
amlogic: Fix prefixes in the SCPI related code
amlogic: Fix prefixes in the MHU code
amlogic: Fix prefixes in the SIP/SVC code
amlogic: Fix prefixes in the thermal driver
amlogic: Fix prefixes in the private header file
amlogic: Fix prefixes in the efuse driver
amlogic: Fix prefixes in the platform macros file
amlogic: Fix prefixes in the helpers file
amlogic: Rework Makefiles
amlogic: Move the SIP SVC code to common directory
amlogic: Move topology file to common directory
amlogic: Move thermal code to common directory
amlogic: Move MHU code to common directory
amlogic: Move efuse code to common directory
amlogic: Move platform macros assembly file to common directory
amlogic: Introduce unified private header file
amlogic: Move SCPI code to common directory
amlogic: Move the SHA256 DMA driver to common directory
amlogic: Move assembly helpers to common directory
amlogic: Introduce directory parameters in the makefiles
meson: Rename platform directory to amlogic
This patch adds support for the Undefined Behaviour sanitizer. There are
two types of support offered - minimalistic trapping support which
essentially immediately crashes on undefined behaviour and full support
with full debug messages.
The full support relies on ubsan.c which has been adapted from code used
by OPTEE.
Change-Id: I417c810f4fc43dcb56db6a6a555bfd0b38440727
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
Sparse warns this:
lib/libc/assert.c:29:6: error: symbol '__assert' redeclared with different type (originally declared at include/lib/libc/assert.h:36) - different modifiers
Add __dead2 to match the header declaration and C definition.
I also changed '__dead2 void' to 'void __dead2' for the consistency
with other parts.
Change-Id: Iefa4f0e787c24fa7e7e499d2e7baf54d4deb49ef
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add plat parameter structs to support BL2 to pass
variable-length, variable-type parameters to BL31.
The parameters are structured as a link list.
During BL31 setup time, we traverse the list to process
each parameter.
Signed-off-by: kenny liang <kenny.liang@mediatek.com>
Change-Id: Ie84cfc9606656fb1d2780a68cadf27e09afa6628
This patch adds support for the new Memory Tagging Extension arriving in
ARMv8.5. MTE support is now enabled by default on systems that support
at EL0. To enable it at ELx for both the non-secure and the secure
world, the compiler flag CTX_INCLUDE_MTE_REGS includes register saving
and restoring when necessary in order to prevent register leakage
between the worlds.
Change-Id: I2d4ea993d6b11654ea0d4757d00ca20d23acf36c
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
The SHA256 DMA driver can be used by multiple SoCs. Move it to the
common directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I96319eeeeeebd503ef0dcb07c0e4ff6a67afeaa5
Meson is the internal code name for the SoC family. The correct name for
the platform should be Amlogic. Change the name of the platform
directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Icc140e1ea137f12117acbf64c7dcb1a8b66b345d
The #include "mbedtls/check_config.h" directive first searches for
the header in the relative path to mbedtls_config.h, i.e.
include/drivers/auth/mbedtls/mbedtls/check_config.h
Obviously, it does not exist since check_config.h is located in
the mbedtls project.
It is more sensible to use #include <...> form.
Change-Id: If72a71381f84e7748a2c9f07dd1176559d9bb1d2
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If the max-frequency property is provided in the device tree mmc node,
it should be managed. The max allowed frequency will be the min between
this property value and what the card can support.
Change-Id: I885b676c3300d2670a0fe4c6ecab87758b5893ad
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Introduce driver for STM32 IWDG peripheral (Independent Watchdog).
It is configured according to device tree content and should be enabled
from there.
The watchdog is not started by default. It can be started after an HW
reset if the dedicated OTP is fused.
The watchdog also needs to be frozen if a debugger is attached.
This is done by configuring the correct bits in DBGMCU.
This configuration is allowed by checking BSEC properties.
An increase of BL2 size is also required when adding this new code.
Change-Id: Ide7535d717885ce2f9c387cf17afd8b5607f3e7f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
This patch fixes an issue when secure world timing information
can be leaked because Secure Cycle Counter is not disabled.
For ARMv8.5 the counter gets disabled by setting MDCR_El3.SCCD
bit on CPU cold/warm boot.
For the earlier architectures PMCR_EL0 register is saved/restored
on secure world entry/exit from/to Non-secure state, and cycle
counting gets disabled by setting PMCR_EL0.DP bit.
'include\aarch64\arch.h' header file was tided up and new
ARMv8.5-PMU related definitions were added.
Change-Id: I6f56db6bc77504634a352388990ad925a69ebbfa
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Currently, console drivers prepend '\r' to '\n' by themselves. This is
common enough to be supported in the framework.
Add a new flag, CONSOLE_FLAG_TRANSLATE_CRLF. A driver can set this
flag to ask the framework to transform LF into CRLF instead of doing
it by itself.
Change-Id: I4f5c5887591bc0a8749a105abe62b6562eaf503b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This patch fixes FVP_Base_AEMv8A model hang issue with
ARMv8.4+ with cache modelling enabled configuration.
Incorrect L1 cache flush operation to PoU, using CLIDR_EL1
LoUIS field, which is required by the architecture to be
zero for ARMv8.4-A with ARMv8.4-S2FWB feature is replaced
with L1 to L2 and L2 to L3 (if L3 is present) cache flushes.
FVP_Base_AEMv8A model can be configured with L3 enabled by
setting `cluster0.l3cache-size` and `cluster1.l3cache-size`
to non-zero values, and presence of L3 is checked in
`aem_generic_core_pwr_dwn` function by reading
CLIDR_EL1.Ctype3 field value.
Change-Id: If3de3d4eb5ed409e5b4ccdbc2fe6d5a01894a9af
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
This patch modifies crash reporting for AArch64 to provide
aligned output of register dump and GIC registers.
Change-Id: I8743bf1d2d6d56086e735df43785ef28051c5fc3
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
NOTE: AARCH32/AARCH64 macros are now deprecated in favor of __aarch64__.
All common C compilers pre-define the same macros to signal which
architecture the code is being compiled for: __arm__ for AArch32 (or
earlier versions) and __aarch64__ for AArch64. There's no need for TF-A
to define its own custom macros for this. In order to unify code with
the export headers (which use __aarch64__ to avoid another dependency),
let's deprecate the AARCH32 and AARCH64 macros and switch the code base
over to the pre-defined standard macro. (Since it is somewhat
unintuitive that __arm__ only means AArch32, let's standardize on only
using __aarch64__.)
Change-Id: Ic77de4b052297d77f38fc95f95f65a8ee70cf200
Signed-off-by: Julius Werner <jwerner@chromium.org>
NOTE: __ASSEMBLY__ macro is now deprecated in favor of __ASSEMBLER__.
All common C compilers predefine a macro called __ASSEMBLER__ when
preprocessing a .S file. There is no reason for TF-A to define it's own
__ASSEMBLY__ macro for this purpose instead. To unify code with the
export headers (which use __ASSEMBLER__ to avoid one extra dependency),
let's deprecate __ASSEMBLY__ and switch the code base over to the
predefined standard.
Change-Id: Id7d0ec8cf330195da80499c68562b65cb5ab7417
Signed-off-by: Julius Werner <jwerner@chromium.org>
Add support for multiple Cryptocell revisions which
use different APIs.
This commit only refactors the existing code in preperation to the addition
of another Cryptocell revisions later on.
Signed-off-by: Gilad Ben-Yossef <gilad.benyossef@arm.com>
Change-Id: I16d80b31afb6edd56dc645fee5ea619cc74f09b6
Code using Cryptocell specific APIs was used as part of the
arm common board ROT support, instead of being abstracted
in Cryptocell specific driver code, creating two problems:
- Any none arm board that uses Cryptocell wuld need to
copy and paste the same code.
- Inability to cleanly support multiple versions of Cryptocell
API and products.
Move over Cryptocell specific API calls into the Cryptocell
driver, creating abstraction API where needed.
Signed-off-by: Gilad Ben-Yossef <gilad.benyossef@arm.com>
Change-Id: I9e03ddce90fcc47cfdc747098bece86dbd11c58e
* changes:
plat/mediatek/mt81*: Use new bl31_params_parse() helper
plat/rockchip: Use new bl31_params_parse_helper()
Add helper to parse BL31 parameters (both versions)
Factor out cross-BL API into export headers suitable for 3rd party code
Use explicit-width data types in AAPCS parameter structs
plat/rockchip: Switch to use new common BL aux parameter library
Introduce lightweight BL platform parameter library
This patch introduces an additional precautionary step to further
enhance protection against variant 4. During the context initialisation
before we enter the various BL stages, the SPSR.SSBS bit is explicitly
set to zero. As such, speculative loads/stores are by default disabled
for all BL stages when they start executing. Subsequently, each BL
stage, can choose to enable speculative loads/stores or keep them
disabled.
This change doesn't affect the initial execution context of BL33 which
is totally platform dependent and, thus, it is intentionally left up to
each platform to initialise.
For Arm platforms, SPSR.SSBS is set to zero for BL33 too. This means
that, for Arm platforms, all BL stages start with speculative
loads/stores disabled.
Change-Id: Ie47d39c391d3f20fc2852fc59dbd336f8cacdd6c
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
BL31 used to take a single bl31_params_t parameter structure with entry
point information in arg0. In commit 726002263 (Add new version of image
loading.) this API was changed to a more flexible linked list approach,
and the old parameter structure was copied into all platforms that still
used the old format. This duplicated code unnecessarily among all these
platforms.
This patch adds a helper function that platforms can optionally link to
outsource the task of interpreting arg0. Many platforms are just
interested in the BL32 and BL33 entry point information anyway. Since
some platforms still need to support the old version 1 parameters, the
helper will support both formats when ERROR_DEPRECATED == 0. This allows
those platforms to drop a bunch of boilerplate code and asynchronously
update their BL2 implementation to the newer format.
Change-Id: I9e6475adb1a7d4bccea666118bd1c54962e9fc38
Signed-off-by: Julius Werner <jwerner@chromium.org>
This patch adds a new include/export/ directory meant for inclusion in
third-party code. This is useful for cases where third-party code needs
to interact with TF-A interfaces and data structures (such as a custom
BL2-implementation like coreboot handing off to BL31). Directly
including headers from the TF-A repository avoids having to duplicate
all these definitions (and risk them going stale), but with the current
header structure this is not possible because handoff API definitions
are too deeply intertwined with other TF code/headers and chain-include
other headers that will not be available in the other environment.
The new approach aims to solve this by separating only the parts that
are really needed into these special headers that are self-contained and
will not chain-include other (non-export) headers. TF-A code should
never include them directly but should instead always include the
respective wrapper header, which will include the required prerequisites
(like <stdint.h>) before including the export header. Third-party code
can include the export headers via its own wrappers that make sure the
necessary definitions are available in whatever way that environment can
provide them.
Change-Id: Ifd769320ba51371439a8e5dd5b79c2516c3b43ab
Signed-off-by: Julius Werner <jwerner@chromium.org>
It's not a good idea to use u_register_t for the members of
aapcs64_params_t and aapcs32_params_t, since the width of that type
always depends on the current execution environment. This would cause
problems if e.g. we used this structure to set up the entry point of an
AArch32 program from within an AArch64 program. (It doesn't seem like
any code is doing that today, but it's probably still a good idea to
write this defensively. Also, it helps with my next patch.)
Change-Id: I12c04a85611f2b6702589f3362bea3e6a7c9f776
Signed-off-by: Julius Werner <jwerner@chromium.org>
The watchdog is configured with a default value of 256 seconds in order
to implement the Trusted Board Boot Requirements.
For the FVP and Juno platforms, the FWU process relies on a watchdog
reset. In order to automate the test of FWU, the length of this process
needs to be as short as possible. Instead of waiting for those 4 minutes
to have a reset by the watchdog, tell it to reset immediately.
There are no side effects as the value of the watchdog's load register
resets to 0xFFFFFFFF.
Tested on Juno.
Change-Id: Ib1aea80ceddc18ff1e0813a5b98dd141ba8a3ff2
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
This patch adds some common helper code to support a lightweight
platform parameter passing framework between BLs that has already been
used on Rockchip platforms but is more widely useful to others as well.
It can be used as an implementation for the SoC firmware configuration
file mentioned in the docs, and is primarily intended for platforms
that only require a handful of values to be passed and want to get by
without a libfdt dependency. Parameters are stored in a linked list and
the parameter space is split in generic and vendor-specific parameter
types. Generic types will be handled by this code whereas
vendor-specific types have to be handled by a vendor-specific handler
function that gets passed in.
Change-Id: If3413d44e86b99d417294ce8d33eb2fc77a6183f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Update the skeleton implementation of the console interface.
The 32 bit version was outdated and has been copied from the 64 bit
version.
Change-Id: Ib3e4eb09402ffccb1a30c703a53829a7bf064dfe
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
* changes:
Enable -Wshift-overflow=2 to check for undefined shift behavior
Update base code to not rely on undefined overflow behaviour
Update hisilicon drivers to not rely on undefined overflow behaviour
Update synopsys drivers to not rely on undefined overflow behaviour
Update imx platform to not rely on undefined overflow behaviour
Update mediatek platform to not rely on undefined overflow behaviour
Update layerscape platform to not rely on undefined overflow behaviour
Update intel platform to not rely on undefined overflow behaviour
Update rockchip platform to not rely on undefined overflow behaviour
Update renesas platform to not rely on undefined overflow behaviour
Update meson platform to not rely on undefined overflow behaviour
Update marvell platform to not rely on undefined overflow behaviour
This patch enables MTE for Normal world if the CPU suppors it. Enabling
MTE for secure world will be done later.
Change-Id: I9ef64460beaba15e9a9c20ab02da4fb2208b6f7d
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
This consists of ensuring that the left operand of each shift is
unsigned when the operation might overflow into the sign bit.
Change-Id: Iddd6f38139a4c6e500468b4fc48d04e0939f574e
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
This patch adds 128-bit integer types int128_t and uint128_t
for "__int128" and "unsigned __int128" supported by GCC and
Clang for AArch64.
Change-Id: I0e646d026a5c12a09fd2c71dc502082052256a94
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
This patch removes incorrect SCTLR_V_BIT definition and adds
definitions for ARMv8.3-Pauth EnIB, EnDA and EnDB bits.
Change-Id: I1384c0a01f56f3d945833464a827036252c75c2e
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Neoverse N1 erratum 1262888 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUECTLR_EL1 system register, which disables the MMU hardware prefetcher.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html
Change-Id: Ib733d748e32a7ea6a2783f3d5a9c5e13eee01105
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Neoverse N1 erratum 1262606 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUACTLR_EL1 system register, which delays instruction fetch after
branch misprediction.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html
Change-Id: Idd980e9d5310232d38f0ce272862e1fb0f02ce9a
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Neoverse N1 erratum 1257314 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUACTLR3_EL1 system register, which prevents parallel
execution of divide and square root instructions.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html
Change-Id: I54f0f40ff9043efee40d51e796b92ed85b394cbb
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Neoverse N1 erratum 1220197 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set two bits in the implementation defined
CPUECTLR_EL1 system register, which disables write streaming to the L2.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html
Change-Id: I9c3373f1b6d67d21ee71b2b80aec5e96826818e8
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Neoverse N1 erratum 1207823 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUACTLR2_EL1 system register.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html
Change-Id: Ia932337821f1ef0d644db3612480462a8d924d21
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Neoverse N1 erratum 1165347 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set two bits in the implementation defined
CPUACTLR2_EL1 system register.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html
Change-Id: I163d0ea00578245c1323d2340314cdc3088c450d
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Neoverse N1 erratum 1130799 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUACTLR2_EL1 system register.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html
Change-Id: I252bc45f9733443ba0503fefe62f50fdea61da6d
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Neoverse N1 erratum 1073348 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUACTLR_EL1 system register, which disables static prediction.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html
Change-Id: I674126c0af6e068eecb379a190bcf7c75dcbca8e
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
* changes:
qemu: use new console interface in aarch32
warp7: remove old console from makefile
Remove MULTI_CONSOLE_API flag and references to it
Console: removed legacy console API
N1SDP platform supports RDIMMs with ECC capability. To use the ECC
capability, the entire DDR memory space has to be zeroed out before
enabling the ECC bits in DMC620. Zeroing out several gigabytes of
memory from SCP is quite time consuming so functions are added that
zeros out the DDR memory from application processor which is
much faster compared to SCP. BL33 binary cannot be copied to DDR memory
before enabling ECC so this is also done by TF-A from IOFPGA-DDR3
memory to main DDR4 memory after ECC is enabled.
Original PLAT_PHY_ADDR_SPACE_SIZE was limited to 36-bits with which
the entire DDR space cannot be accessed as DRAM2 starts in base
0x8080000000. So these macros are redefined for all ARM platforms.
Change-Id: If09524fb65b421b7a368b1b9fc52c49f2ddb7846
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
* changes:
fdts: stm32mp1: realign device tree files with internal devs
stm32mp1: increase device tree size to 20kB
stm32mp1: make dt_get_stdout_node_offset() static
stm32mp1: use unsigned values for SDMMC defines
stm32mp1: remove useless LIBFDT_SRCS from PLAT_BL_COMMON_SOURCES
stm32mp1: update doc for U-Boot compilation
stm32mp1: add general SYSCFG management
stm32mp1: move stm32_get_gpio_bank_clock() to private file
clk: stm32mp1: correctly handle Clock Spreading Generator
clk: stm32mp1: use defines for mask values in stm32mp1_clk_sel array
clk: stm32mp1: move oscillator functions to generic file
arch: add some defines for generic timer registers
Rework the macro that eases the table definition: the src and msk fields
are now using MASK and SHIFT defines of each source register.
Some macros had then to be modified: _USART1_SEL, _ASS_SEL and _MSS_SEL to
_UART1_SEL, _AXIS_SEL, and _MCUS_SEL to match register fields.
Note: the mask for RCC_ASSCKSELR_AXISSRC is changed from 0x3 to 0x7
to reflect the size of the register field, even if there are only
3 possible clock sources.
The mask value is also corrected for QSPI and FMC clock selection.
Change-Id: I44114e3c1dd37b9fa1be1ba519611abd9a07764c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Those functions are generic for parsing nodes from device tree
hence could be located in generic source file.
The oscillators description structure is also moved to STM32MP1 clock
driver, as it is no more used in stm32mp1_clkfunc and cannot be in a
generic file.
Change-Id: I93ba74f4eea916440fef9b160d306af1b39f17c6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Those defines are used in STM32MP1 clock driver.
It is better to put them altogether with already defined registers.
Change-Id: I6f8ad8c2477b947af6f76283a4ef5c40212d0027
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Convert the R-Car Gen3 platform and both SCIF and Log drivers
to multi-console API.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I18556973937d150b60453f9150d54ee612571e35
The chain of trust description and the pointer pointing to its first
element were incompatible, thus requiring an explicit type cast for
the assignment.
- cot_desc was an array of
const pointers to const image descriptors.
- cot_desc_ptr was a const pointer to
(non-constant) pointers to const image descriptors.
Thus, trying to assign cot_desc to cot_desc_ptr (with no cast) would
generate the following compiler warning:
drivers/auth/tbbr/tbbr_cot.c:826:14: warning: initialization discards
‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
REGISTER_COT(cot_desc);
^~~~~~~~
Change-Id: Iae62dd1bdb43fe379e3843d96461d47cc2f68a06
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Neoverse N1 erratum 1315703 is a Cat A (rare) erratum [1], present in
older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined CPUACTLR2_EL1
system register, which will disable the load-bypass-store feature.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdocpjdoc-466751330-1032/index.html
Change-Id: I5c708dbe0efa4daa0bcb6bd9622c5efe19c03af9
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The workaround is added to the Cortex-A55 cpu specific file. The
workaround is disabled by default and have to be explicitly enabled by
the platform integrator.
Change-Id: I3e6fd10df6444122a8ee7d08058946ff1cc912f8
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
This patch adds the functionality needed for platforms to provide
Branch Target Identification (BTI) extension, introduced to AArch64
in Armv8.5-A by adding BTI instruction used to mark valid targets
for indirect branches. The patch sets new GP bit [50] to the stage 1
Translation Table Block and Page entries to denote guarded EL3 code
pages which will cause processor to trap instructions in protected
pages trying to perform an indirect branch to any instruction other
than BTI.
BTI feature is selected by BRANCH_PROTECTION option which supersedes
the previous ENABLE_PAUTH used for Armv8.3-A Pointer Authentication
and is disabled by default. Enabling BTI requires compiler support
and was tested with GCC versions 9.0.0, 9.0.1 and 10.0.0.
The assembly macros and helpers are modified to accommodate the BTI
instruction.
This is an experimental feature.
Note. The previous ENABLE_PAUTH build option to enable PAuth in EL3
is now made as an internal flag and BRANCH_PROTECTION flag should be
used instead to enable Pointer Authentication.
Note. USE_LIBROM=1 option is currently not supported.
Change-Id: Ifaf4438609b16647dc79468b70cd1f47a623362e
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
* changes:
N1SDP: Initialise CNTFRQ in Non Secure CNTBaseN
N1SDP: Fix DRAM2 start address
Add option for defining platform DRAM2 base
Disable speculative loads only if SSBS is supported
The default DRAM2 base address for Arm platforms
is 0x880000000. However, on some platforms the
firmware may want to move the start address to
a different value.
To support this introduce PLAT_ARM_DRAM2_BASE that
defaults to 0x880000000; but can be overridden by
a platform (e.g. in platform_def.h).
Change-Id: I0d81195e06070bc98f376444b48ada2db1666e28
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
For security DMA should be blocked at the SMMU by default
unless explicitly enabled for a device. SMMU is disabled
after reset with all streams bypassing the SMMU, and
abortion of all incoming transactions implements a default
deny policy on reset.
This patch also moves "bl1_platform_setup()" function from
arm_bl1_setup.c to FVP platforms' fvp_bl1_setup.c and
fvp_ve_bl1_setup.c files.
Change-Id: Ie0ffedc10219b1b884eb8af625bd4b6753749b1a
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The workaround for Cortex-A76 errata #1286807 is implemented
in this patch.
Change-Id: I6c15af962ac99ce223e009f6d299cefb41043bed
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
The workarounds for errata 1257314, 1262606, 1262888 and 1275112 are
added to the Cortex-A76 cpu specific file. The workarounds are disabled
by default and have to be explicitly enabled by the platform integrator.
Change-Id: I70474927374cb67725f829d159ddde9ac4edc343
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
This patch is a preparation for the subsequent changes in
SMMUv3 driver. It introduces a new "smmuv3_poll" function
and replaces inline functions for accessing SMMU registers
with mmio read/write operations. Also the infinite loop
for the poll has been replaced with a counter based timeout.
Change-Id: I7a0547beb1509601f253e126b1a7a6ab3b0307e7
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Similar to bl31_warm_entrypoint, sp_min-based platforms may need
that for special resume handling.
Therefore move it from the private header to the sp_min platform header.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I40d9eb3ff77cff88d47c1ff51d53d9b2512cbd3e
This patch forces all cacheable atomic instructions to be near, which
improves performance in highly contended parallelized use-cases.
Change-Id: I93fac62847f4af8d5eaaf3b52318c30893e947d3
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Madhukar Pappireddy
Lionel Debieve
Haojian Zhuang
Sandrine Bailleux
Andre Przywara
Soby Mathew
Alexei Fedorov
Justin Chadwell
Hadi Asyrafi
Masahiro Yamada
kenny liang
Carlo Caione
Yann Gautier
Paul Beesley
Julius Werner
Balint Dobszay
Gilad Ben-Yossef
John Tsichritzis
Ambroise Vincent
Louis Mayencourt
Remi Pommarel
lauwal01
Manoj Kumar
Marek Vasut
Sami Mujawar
Heiko Stuebner
Antonio Niño Díaz