This option allows the Trusted Firmware to directly jump to Linux
kernel for aarch32 without the need of an intermediate loader such
as U-Boot.
Similar to AArch64 ARM_LINUX_KERNEL_AS_BL33 only available with
RESET_TO_SP_MIN=1 as well as BL33 and DTB are preloaded in memory.
Change-Id: I908bc1633696be1caad0ce2f099c34215c8e0633
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
When CSS_USE_SCMI_DRIVER is not defined or set to 0, we get the
following build error.
plat/arm/board/juno/juno_topology.c:16:19: error: ‘CSS_SCMI_PAYLOAD_BASE’ undeclared here (not in a function)
.scmi_mbx_mem = CSS_SCMI_PAYLOAD_BASE,
^~~~~~~~~~~~~~~~~~~~~
plat/arm/board/juno/juno_topology.c:17:38: error: ‘CSS_SCMI_MHU_DB_REG_OFF’ undeclared here (not in a function)
.db_reg_addr = PLAT_CSS_MHU_BASE + CSS_SCMI_MHU_DB_REG_OFF,
^~~~~~~~~~~~~~~~~~~~~~~
CSS_CPU_PWR_STATE_OFF
Fix the error in order to get function legacy SCPI support functional.
Change-Id: I00cb80db9968aa0be546e33a3a682a2db87719be
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The macro EL_IMPLEMENTED() has been deprecated in favour of the new
function el_implemented().
Change-Id: Ic9b1b81480b5e019b50a050e8c1a199991bf0ca9
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Add supprot for Marvell platforms based on Armada-37xx SoC.
This includes support for the official Armada-3720 modular
development board and EspressoBin community board.
The Armada-37xx SoC contains dual Cortex-A53 Application CPU,
single secure CPU (Cortex-M3) and the following interfaces:
- SATA 3.0
- USB 3.0 and USB 2.0
- PCIe
- SDIO (supports boot from eMMC)
- SPI
- UART
- I2c
- Gigabit Ethernet
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
A recent patch[0] has made setting up page tables into generic
code, complete the conversion for TI platforms by removing the
use of plat_arm_get_mmap() and using the mmap table directly.
[0] 0916c38dec ("Convert arm_setup_page_tables into a generic helper")
Signed-off-by: Andrew F. Davis <afd@ti.com>
include/plat/arm/common isn't needed by them, and is removed to avoid
dependency on Arm platform code.
Change-Id: Id9fccba33326fd075b3d1029bf1e4b012dfa0483
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
plat/arm files should only be used by Arm platforms. If other platforms
use them, they create dependencies that can introduce problems when
updating Arm platforms.
This patch copies the needed code from Arm platforms so that poplar can
be independent from them.
Change-Id: I0b194f5bdb0377b8ccacbd400e021614c026c7fe
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
When the SoC issues a command IRQ to SCP, SCP sets STMTOBEIRQ as ACK.
The SoC must wait for it before issuing the next command.
This commit makes sure to meet the requirement.
Signed-off-by: Dai Okamura <okamura.dai@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Skipping SCP_BL2 image is just a temporary workaround. If on-chip SCP
needs to work, BL2 should load the SCP_BL2 image.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This patch adds support for the N1SDP (NeoVerse N1 System Development
Platform). It is an initial port and additional features are expected
to be added later.
The port includes only BL31 support as the System Control Processor
(SCP) is expected to take the role of primary boatloader
Change-Id: Ife17d8215a7bfcc1420204a72205e7ef920d0c10
Signed-off-by: Deepak Pandey <Deepak.Pandey@arm.com>
This patch enabled PIE for FVP when RESET_TO_BL31=1. The references
to BL31_BASE are replaced by BL31_START as being a symbol exported by
the linker, will create a dynamic relocation entry in .rela.dyn and
hence will be fixed up by dynamic linker at runtime. Also, we disable
RECLAIM_INIT_CODE when PIE is enabled as the init section overlay
creates some static relocations which cannot be handled by the
dynamic linker currently.
Change-Id: I86df1b0a8b2a8bbbe7c3f3c0b9a08c86c2963ec0
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
This patch makes use of mov_imm macro where possible to load
immediate values within ARM platform layer.
Change-Id: I02bc7fbc1fa334c9fccf76fbddf515952f9a1298
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
This patch adds a utility function to return
the address of a symbol. By default, the compiler
generates adr/adrp instruction pair to return
the reference and this utility is used to override
this compiler generated to code and use `ldr`
instruction.
This is needed for Position Independent Executable
when it needs to reference a symbol which is constant
and does not depend on the execute address of the
binary.
For example, on the FVP, the GICv3 register context is
stored in a secure carveout (arm_el3_tzc_dram) within
DDR and does not relocate with the BL image. Now if
BL31 is executing at a different address other than
the compiled address, using adrp/adr instructions to
reference this memory will not work as they generate an
address that is PC relative. The way to get around this
problem is to reference it as non-PC relative (i.e
non-relocatable location) via `ldr` instruction.
Change-Id: I5008a951b007144258121690afb68dc8e12ee6f7
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
This function is not related to Arm platforms and can be reused by other
platforms if needed.
Change-Id: Ia9c328ce57ce7e917b825a9e09a42b0abb1a53e8
Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
There are several platforms using arm_setup_page_tables(), which is
supposed to be Arm platform only. This creates several dependency
problems between platforms.
This patch adds the definition XLAT_TABLES_LIB_V2 to the xlat tables lib
v2 makefile. This way it is possible to detect from C code which version
is being used and include the correct header.
The file arm_xlat_tables.h has been renamed to xlat_tables_compat.h and
moved to a common folder. This way, when in doubt, this header can be
used to guarantee compatibility, as it includes the correct header based
on XLAT_TABLES_LIB_V2.
This patch also removes the usage of ARM_XLAT_TABLES_V1 from QEMU (so
that is now locked in xlat lib v2) and ZynqMP (where it was added as a
workaround).
Change-Id: Ie1e22a23b44c549603d1402a237a70d0120d3e04
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
There seems to be a problem where SCP can't turn CPU0 off. Instead of
returning PSCI_E_DENIED or crashing make CPU0 wait in a WFE loop. This
way all CPUs have a consistent behaviour from the point of view of the
caller.
Change-Id: I5c8c266ca3b69c9e7a4f5ae70afeea5dd36a0825
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This works fine for CPU1-3, but it fails for CPU0, where it is simply
ignored and leaves CPU0 in a WFI loop.
Change-Id: I7d73683fdd894f2021d6a5bc2cce6cd03e18e633
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The Amlogic Meson S905 is a SoC with a quad core Arm Cortex-A53 running
at 1.5Ghz. It also contains a Cortex-M3 used as SCP.
This port is a minimal implementation of BL31 capable of booting
mainline U-Boot and Linux:
- Partial SCPI support.
- Basic PSCI support (CPU_ON, SYSTEM_RESET, SYSTEM_OFF).
- GICv2 driver set up.
- Basic SIP services (read efuse data, enable/disable JTAG).
This port has been tested in an ODROID-C2.
Change-Id: Ia4bc82d7aca42a69d6b118b947279f82b3f6c6da
Tested-by: Amit Singh Tomar <amittomer25@gmail.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
SGI-Clark.Ares platform is a variant of the SGI-Clark platform. It has
two clusters of four Ares CPUs each. Though very similar to the SGI575
platform, there are subtle differences. HW_CONFIG and TB_FW_CONFIG dts
files have been added.
Change-Id: I740a33cbd1c3b1f1984cb56243b46ad379bab3e6
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
SGI-Clark platform is the next version in the Arm's SGI platform
series. One of the primary difference between the SGI-575 platform and
the SGI-Clark platform is the MHU version (MHUv2 in case of SGI-Clark).
Add the required base support for SGI-Clark platform.
Change-Id: If396e5279fdf801d586662dad0b55195e81371e4
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
On SGI platforms that include Ares CPUs, the 'CORE_PWRDN_EN' bit of
'CPUPWRCTLR_EL1' register requires an explicit write to clear it to
enable hotplug and idle to function correctly.
The reset value of the CORE_PWRDN_EN bit is zero but it still requires
this explicit clear to zero. This indicates that this could be a model
related issue but for now this issue can be fixed be clearing the
CORE_PWRDN_EN bit in the platform specific reset handler function.
Change-Id: I8b9884ae27a2986d789bfec2e9ae792ef930944e
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
The default behaviour of the plat_crash_console_xxx functions isn't
obvious to someone that hasn't read all the documentation. As they are
not mandatory, it is unlikely that the code will be checked when doing a
platform port, which may mean that some platforms may not have crash
console support at all.
The idea of this patch is to force platform maintainers to decide how
the crash console has to behave so that the final behaviour isn't
unexpected.
Change-Id: I40b2a7b56c5530c1dcd63eace5bd37ae6335056e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This platform depends on weak functions defined in
``plat/common/aarch64/platform_helpers.S`` that are going to be removed.
Change-Id: I5104d091c32271d77ed9690e9dc257c061289def
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Platforms that wish to use the sample functions have to add the file to
their Makefile. It is not included by default.
Change-Id: I713617bb58dc218967199248f68da86241d7ec40
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
In Arm platforms the crash console doesn't print anything if the crash
happens early enough. This happens in all images, not only BL1. The
reason is that they the files ``plat/common/aarch64/platform_helpers.S``
and ``plat/arm/common/aarch64/arm_helpers.S``, and the crash console
functions are defined as weak in both files. In practice, the linker
can pick the one in ``plat/common``, which simply switches the multi
console to crash mode when it wants to initialize the crash console.
In the case of Arm platforms, there are no console drivers registered
at that point, so nothing is printed.
This patch makes the functions in plat/arm strong so that they override
the weak functions in plat/common.
Change-Id: Id358db7d2567d7df0951790a695636cf6c9ac57f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Even though at this point plat_crash_console_flush is optional, it will
stop being optional in a following patch.
The console driver of warp7 doesn't support flush, so the implementation
is a placeholder.
TI had ``plat_crash_console_init`` and ``plat_crash_console_putc``, but
they weren't global so they weren't actually used. Also, they were
calling the wrong functions.
imx8_helpers.S only has placeholders for all of the functions.
Change-Id: I8d17bbf37c7dad74e134c61ceb92acb9af497718
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Non-Arm platforms shouldn't use Arm platform code. This patch copies the
implementation of the functions in arm_helpers.S to zynqmp_helpers.S to
remove this dependency of zynqmp on Arm platforms.
Change-Id: Ia85f303c4c63bcf0ffa57c7f3ef9d88376729b6b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
When a device tree blob is present at a known address, instead of, for
example, relying on the user modifying the Linux command line to warn
about the memory reserved for the Trusted Firmware, pass it on the DTB.
The current code deletes the memory reserved for the default bootstrap
of the Raspberry Pi and adds the region used by the Trusted Firmware.
This system replaces the previous one consisting on adding
``memmap=16M$256M`` to the Linux command line. It's also meant to be
used by U-Boot and any other bootloader that understands DTB files.
Change-Id: I13ee528475fb043d6e8d9e9f24228e37ac3ac436
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Version 1.4.7 of libfdt is bigger than the current one (1.4.2) and the
current reserved space for BL2 in Juno isn't enough to fit the Trusted
Firmware when compiling with clang or armclang.
Change-Id: I7b73394ca60d17f417773f56dd5b3d54495a45a8
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The definitions FAIL_CONTROL_*_SHIFT were incorrect, they have been
fixed.
The types tzc_region_attributes_t and tzc_action_t have been removed and
replaced by unsigned int because it is not allowed to do logical
operations on enums.
Also, fix some address definitions in arm_def.h.
Change-Id: Id37941d76883f9fe5045a5f0a4224c133c504d8b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Move doimage utility from toos/doimage to tools/marvell/doimage.
This is done for supporting mode Marvell tools in the future.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
PSCI requires a core to turn itself off, which we can't do properly by
just executing an algorithm on that very core. As a consequence we just
put a core into WFI on CPU_OFF right now.
To fix this let's task the "arisc" management processor (an OpenRISC
core) with that task of asserting reset and turning off the core's power
domain. We use a handcrafted sequence of OpenRISC instructions to
achieve this, and hand this data over to the new sunxi_execute_arisc_code()
routine.
The commented source code for this routine is provided in a separate file,
but the ATF code contains the already encoded instructions as data.
The H6 uses the same algorithm, but differs in the MMIO addresses, so
provide a SoC (family) specific copy of that code.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The more recent Allwinner SoCs contain an OpenRISC management
controller (called arisc or CPUS), which shares the bus with the ARM cores,
but runs on a separate power domain. This is meant to handle power
management with the ARM cores off.
There are efforts to run sophisticated firmware on that core
(communicating via SCPI with the ARM world), but for now can use it for
the rather simple task of helping to turn the ARM cores off. As this
cannot be done by ARM code itself (because execution stops at the
first of the three required steps), we can offload some instructions to
this management processor.
This introduces a helper function to hand over a bunch of instructions
and triggers execution. We introduce a bakery lock to avoid two cores
trying to use that (single) arisc core. The arisc code is expected to
put itself into reset after is has finished execution.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
There are reports that activating the DC1SW before certain other
regulators leads to the PMIC overheating and consequently shutting down.
To avoid this situation, delay the activation of the DC1SW line until
the very end, so those other lines are always activated earlier.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Based on the just introduced PMIC FDT framework, we check the DT for more
voltage rails that need to be setup early:
- DCDC1 is typically the main board power rail, used for I/O pins, for
instance. The PMIC's default is 3.0V, but 3.3V is what most boards use,
so this needs to be adjusted as soon as possible.
- DCDC5 is supposed to be connected to the DRAM. The AXP has some
configurable reset voltage, but some boards get that wrong, so we better
set up this here to avoid over- or under-volting.
- DLDO1,2,3 and FLDO1 mostly drive some graphics related IP, some boards
need this to be up to enable HDMI or the LCD screen, so we get screen
output in U-Boot.
To get the right setup, but still being flexible, we query the DT for
the required voltage and whether that regulator is actually used. That
gives us some robust default setup U-Boot is happy with.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Now that we have a pointer to the device tree blob, let's use that to
do some initial setup of the PMIC:
- We scan the DT for the compatible string to find the PMIC node.
- We switch the N_VBUSEN pin if the DT property tells us so.
- We scan over all regulator subnodes, and switch DC1SW if there is at
least one other node referencing it (judging by the existence of a
phandle property in that subnode).
This is just the first part of the setup, a follow up patch will setup
voltages.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
For Allwinner boards we now use some heuritistics to find a preloaded
.dtb file.
Pass this address on to the PMIC setup routine, so that it can use the
information contained therein to setup some initial power rails.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The initial PMIC setup for the Allwinner platform is quite board
specific, and used to be guarded by reading the .dtb stub *name* from the
SPL image in the legacy ATF port. This doesn't scale particularly well,
and requires constant maintainance.
Instead having the actual .dtb available would be much better, as the PMIC
setup requirements could be read from there directly.
The only available BL33 for Allwinner platforms so far is U-Boot, and
fortunately U-Boot comes with the full featured .dtb, appended to the
end of the U-Boot image.
Introduce some code that scans the beginning of the BL33 image to look
for the load address, which is followed by the image size. Adding those
two values together gives us the end of the image and thus the .dtb
address. Verify that this heuristic is valid by sanitising some values
and checking the DTB magic.
Print out the DTB address and the model name, if specified in the root
node.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Boards with the Allwinner A64 SoC are mostly paired with an AXP803 PMIC,
which allows to programmatically power down the board.
Use the newly introduced RSB driver to detect and program the PMIC on
boot, then later to turn off the main voltage rails when receiving a
PSCI SYSTEM_POWER_OFF command.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
In the H6 platform code there is a routine to do the platform
initialisation of the R_I2C controller. We will need a very similar
setup routine to initialise the RSB controller on the A64.
Move this code to sunxi_common.c and generalise it to support all SoCs
and also to cover the related RSB bus.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Allwinner produces reference board designs, which apparently most board
vendors copy from. So every H5 board I checked uses regulators which are
controlled by the same PortL GPIO pins to power the ARM CPU cores, the
DRAM and the I/O ports.
Add a SoC specific power down routine, which turns those regulators off
when ATF detects running on an H5 SoC and the rich OS triggers a
SYSTEM_POWEROFF PSCI call.
NOTE: It sounds very tempting to turn the CPU power off, but this is not
working as expected, instead the system is rebooting. Most probably this
is due to VCC-SYS also being controlled by the same GPIO line, and
turning this off requires an elaborate and not fully understood setup.
Apparently not even Allwinner reference code is turning this regulator
off. So for now we refrain to pulling down PL8, the power consumption is
quite low anyway, so we are as close to poweroff as reasonably possible.
Many thanks to Samuel for doing some research on that topic.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Many boards without a dedicated PMIC contain simple regulators, which
can be controlled via GPIO pins.
To later allow turning them off easily, introduce a simple function to
configure a given pin as a GPIO out pin and set it to the desired level.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
So far we have a sunxi_private.h header file in the common code directory.
This holds the prototypes of various functions we share in *common*
code. However we will need some of those in the platform specific code
parts as well, and want to introduce new functions shared across the
whole platform port.
So move the sunxi_private.h file into the common/include directory, so
that it becomes visible to all parts of the platform code.
Fix up the existing #includes and add missing ones, also add the
sunxi_read_soc_id() prototype here.
This will be used in follow up patches.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Some boards don't have a PMIC, so they can't easily turn their power
off. To cover those boards anyway, let's turn off as many devices and
clocks as possible, so that the power consumption is reduced. Then
halt the last core, as before.
This will later be extended with proper PMIC support for supported
boards.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
In the BL31 platform setup we read the Allwinner SoC ID to identify the
chip and print its name.
In addition to that we will need to differentiate the power setup
between the SoCs, to pass on the SoC ID to the PMIC setup routine.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
We will soon make more use of the Allwinner SoC ID, to differentiate the
platform setup.
Introduce definitions to avoid dealing with magic numbers and make the
code more readable.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The SRAM in the Allwinner H6 SoC starts at 0x2000, with the last part
ending at 0x117fff (although with gaps in between).
So SUNXI_SRAM_SIZE should be 0xf8000, not 0x98000.
Fix this to map the arisc exception vector area, which we will need
shortly.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
According to the documentation, platforms may choose to trade memory
footprint for performance (and elegancy) by not providing a separately
mapped coherent page.
Since a debug build is getting close to the SRAM size limit already, this
allows us to save about 3.5KB of BSS and have some room for future
enhancements.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
At the moment we map as much of the DRAM into EL3 as possible, however
we actually don't use it. The only exception is the secure DRAM for
BL32 (if that is configured).
To decrease the memory footprint of ATF, we save on some page tables by
reducing the memory mapping to the actually required regions: SRAM, device
MMIO, secure DRAM and U-Boot (to be used later).
This introduces a non-identity mapping for the DRAM regions.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
For the two different platforms we support in the Allwinner port we
mostly rely on header files covering the differences. This leads to the
platform.mk files in the respective directories to be almost identical.
To avoid further divergence and make sure that one platform doesn't
break accidentally, let's create a shared allwinner-common.mk file and
include that from the platform directory.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The `finish_console_register` macro is used by the multi console
framework to register the `console_t` driver callbacks. It relied
on weak references to the `ldr` instruction to populate 0 to the
callback in case the driver has not defined the appropriate
function. Use of `ldr` instruction to load absolute address to a
reference makes the binary position dependant. These instructions
should be replaced with adrp/adr instruction for position independant
executable(PIE). But adrp/adr instructions don't work well with weak
references as described in GNU ld bugzilla issue 22589.
This patch defines a new version of `finish_console_register` macro
which can spcify which driver callbacks are valid and deprecates the
old one. If any of the argument is not specified, then the macro
populates 0 for that callback. Hence the functionality of the previous
deprecated macro is preserved. The USE_FINISH_CONSOLE_REG_2 define
is used to select the new variant of the macro and will be removed
once the deprecated variant is removed.
All the upstream console drivers have been migrated to use the new
macro in this patch.
NOTE: Platforms be aware that the new variant of the
`finish_console_register` should be used and the old variant is
deprecated.
Change-Id: Ia6a67aaf2aa3ba93932992d683587bbd0ad25259
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Since upstream QEMU commit 14ec3cbd7c1e ("device_tree: Increase
FDT_MAX_SIZE to 1 MiB"), which is included in release v2.12.1
and later, BL2 initialization fails with the following error (-3 is
-FDT_ERR_NOSPACE):
ERROR: Invalid Device Tree at 0x40000000: error -3
Increase PLAT_QEMU_DT_MAX_SIZE accordingly.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
The default values of 'plat_css_scmi_plat_info' is not applicable for
all the platforms. There should be a provision to let platform code to
register a platform specific instance of scmi_channel_plat_info_t.
Add a new API 'plat_css_get_scmi_info' which lets the platform to
register a platform specific instance of scmi_channel_plat_info_t and
remove the default values.
In addition to this, the existing 'plat_css_scmi_plat_info' structure
is removed from the common code and instantiated for the platforms that
need it. This allows for a consistent provisioning of the SCMI channel
information across all the existing and upcoming platforms.
Change-Id: I4fb65d7f2f165b78697b4677f1e8d81edebeac06
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Dynamically populating the 'system-id' node in the HW_CONFIG dts makes
it difficult to enforce memory overlap checks. So add the system-id node
in the HW_CONFIG dts file as a place holder with 'platform-id' and
'config-id' set to zero.
The code at BL2 stage determines the values of 'platform-id' and
'config-id' at runtime and updates the corresponding fields in the
system-id node of HW_CONFIG dts.
Change-Id: I2ca9980b994ac418da8afa0c72716ede10aff68a
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
To align the placement of ftds files with that of other Arm platforms,
move the ftds files from plat/arm/css/sgi/ to plat/arm/board/sgi575.
Change-Id: Id7c772eb5cf3d308d4e02a3c8099218e889a0e96
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
On SGI platforms, the interconnect is setup by the SCP and so the
existing unused interconnect setup in sgi575 platform code can be
removed. As a result of this, sgi_plat_config.c and sgi_bl1_setup.c
files can be removed as these files are now empty or can be
substainated by the existing weak functions.
Change-Id: I3c883e4d1959d890bf2213a9be01f02551ea3a45
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
In preparation of adding support for upcoming SGI platforms, macros
common to all the SGI platforms are moved into sgi_base_platform_def.h
file. Macros that are specific to sgi575 platform remain in the
platform_def.h file. In addition to this, the platform_def.h file is
moved to sgi575 board directory. Also the ENT_CPU_SOURCES has been
renamed to SGI_CPU_SOURCES and moved from sgi-common.mk to board
specific makefile platform.mk
Change-Id: Iccdd9f070f4feea232b9fbf4fdcc0ef2e8eccbf2
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Some of COMPHY parameters depends on the hw connection between the SoC
and the PHY, which can vary on different boards e.g. due to different
wires length. Define the "porting layer" with some defaults
parameters. It ease updating static values which needs to be updated due
to board differences, which are now grouped in one place.
Example porting layer for a8k-db is under:
plat/marvell/a8k/a80x0/board/phy-porting-layer.h
If for some boards parameters are not defined (missing
phy-porting-layer.h), the default values are used
(drivers/marvell/comphy/phy-default-porting-layer.h)
and the following compilation warning is show:
"Using default comphy params - you may need to suit them to your board".
The common COMPHY driver code is extracted in order to be shared with
future COMPHY driver for A3700 SoC platforms
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reference code:
==============
rar_gen3: IPL and Secure Monitor Rev1.0.22
https://github.com/renesas-rcar/arm-trusted-firmware [rcar_gen3]
Author: Takuya Sakata <takuya.sakata.wz@bp.renesas.com>
Date: Thu Aug 30 21:26:41 2018 +0900
Update IPL and Secure Monitor Rev1.0.22
General Information:
===================
This port has been tested on the Salvator-X Soc_id r8a7795 revision
ES1.1 (uses an SPD).
Build Tested:
-------------
ATFW_OPT="LSI=H3 RCAR_DRAM_SPLIT=1 RCAR_LOSSY_ENABLE=1"
MBEDTLS_DIR=$mbedtls
$ make clean bl2 bl31 rcar PLAT=rcar ${ATFW_OPT} SPD=opteed
Other dependencies:
------------------
* mbed_tls:
git@github.com:ARMmbed/mbedtls.git [devel]
Merge: 68dbc94 f34a4c1
Author: Simon Butcher <simon.butcher@arm.com>
Date: Thu Aug 30 00:57:28 2018 +0100
* optee_os:
https://github.com/BayLibre/optee_os
Until it gets merged into OP-TEE, the port requires Renesas' Trusted
Environment with a modification to support power management.
Author: Jorge Ramirez-Ortiz <jramirez@baylibre.com>
Date: Thu Aug 30 16:49:49 2018 +0200
plat-rcar: cpu-suspend: handle the power level
Signed-off-by: Jorge Ramirez-Ortiz <jramirez@baylibre.com>
* u-boot:
The port has beent tested using mainline uboot.
Author: Fabio Estevam <festevam@gmail.com>
Date: Tue Sep 4 10:23:12 2018 -0300
*linux:
The port has beent tested using mainline kernel.
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun Sep 16 11:52:37 2018 -0700
Linux 4.19-rc4
Overview
---------
BOOTROM starts the cpu at EL3; In this port BL2 will therefore be entered
at this exception level (the Renesas' ATF reference tree [1] resets into
EL1 before entering BL2 - see its bl2.ld.S)
BL2 initializes DDR (and i2c to talk to the PMIC on some platforms)
before determining the boot reason (cold or warm).
During suspend all CPUs are switched off and the DDR is put in
backup mode (some kind of self-refresh mode). This means that BL2 is
always entered in a cold boot scenario.
Once BL2 boots, it determines the boot reason, writes it to shared
memory (BOOT_KIND_BASE) together with the BL31 parameters
(PARAMS_BASE) and jumps to BL31.
To all effects, BL31 is as if it is being entered in reset mode since
it still needs to initialize the rest of the cores; this is the reason
behind using direct shared memory access to BOOT_KIND_BASE and
PARAMS_BASE instead of using registers to get to those locations (see
el3_common_macros.S and bl31_entrypoint.S for the RESET_TO_BL31 use
case).
Depending on the boot reason BL31 initializes the rest of the cores:
in case of suspend, it uses a MBOX memory region to recover the
program counters.
[1] https://github.com/renesas-rcar/arm-trusted-firmware
Tests
-----
* cpuidle
-------
enable kernel's cpuidle arm_idle driver and boot
* system suspend
--------------
$ cat suspend.sh
#!/bin/bash
i2cset -f -y 7 0x30 0x20 0x0F
read -p "Switch off SW23 and press return " foo
echo mem > /sys/power/state
* cpu hotplug:
------------
$ cat offline.sh
#!/bin/bash
nbr=$1
echo 0 > /sys/devices/system/cpu/cpu$nbr/online
printf "ONLINE: " && cat /sys/devices/system/cpu/online
printf "OFFLINE: " && cat /sys/devices/system/cpu/offline
$ cat online.sh
#!/bin/bash
nbr=$1
echo 1 > /sys/devices/system/cpu/cpu$nbr/online
printf "ONLINE: " && cat /sys/devices/system/cpu/online
printf "OFFLINE: " && cat /sys/devices/system/cpu/offline
Signed-off-by: ldts <jramirez@baylibre.com>
Leave the caches on and explicitly flush any data that
may be stale when the core is powered down. This prevents
non-coherent interconnect access which has negative side-
effects on AM65x.
Signed-off-by: Andrew F. Davis <afd@ti.com>
When HW_ASSISTED_COHERENCY is enabled we can use spinlocks
instead of using the more complex and slower bakery algorithm.
Change-Id: I9d791a70050d599241169b9160a67e57d5506564
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
macro jump_if_cpu_midr is used commonly by many arm platform.
It has now been relocated to common place to remove duplication
of code.
Change-Id: Ic0876097dbc085df4f90eadb4b7687dde7c726da
Signed-off-by: Deepak Pandey <Deepak.Pandey@arm.com>
This driver is for the STMicroelectronics sdmmc2 IP
which is in STM32MP1 SoC.
It uses the MMC framework, and can address either eMMC or SD-card.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This file is shared between FVP and all CSS platforms. While it may be
true that some definitions can be common, it doesn't make sense
conceptually. For example, the stack size depends on the platform and so
does the SRAM size.
After removing them, there are not enough common definitions to justify
having this header, so the other definitions have been moved to the
platform_def.h of FVP, board_css_def.h and arm_def.h.
Change-Id: Ifbf4b017227f9dfefa1a430f67d7d6baae6a4ba1
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This file is only used by Juno as all other CSS platforms have their own
private memory maps.
Change-Id: I1c9f27aac7b1d8bff4d92674e8bde5505b93c8c4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The "Secure" prefix (S-ELx) is valid only for S-EL0 and S-EL1 but is
meaningless for EL3, since EL3 is always secure. Hence, the "S" prefix
has been removed from wherever it was used as "S-EL3".
Change-Id: Icdeac9506d763f9f83d7297c7113aec7b85e9dbe
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
In the function, bl1_early_platform_setup in the file
plat/arm/css/sgm/sgm_bl1_setup.c:
plat_config_init();
arm_bl1_early_platform_setup();
The debug messages logged by plat_config_init() are lost because
the console is initialized in the function
arm_bl1_early_platform_setup()
To see the logs of plat_config_init, this fix re-orders above calls
so that the console is initialized before call to plat_config_init.
Change-Id: I2e98f1f67c591cca24e28905acd0838ea3697a7c
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
This way it can be reused by other platforms if needed.
Note that this driver is designed to work with the Versatile Express NOR
flash of Juno and FVP. In said platforms, the memory is organized as an
interleaved memory of two chips with a 16 bit word.
Any platform that wishes to reuse it with a different configuration will
need to modify the driver so that it is more generic.
Change-Id: Ic721758425864e0cf42b7b9b04bf0d9513b6022e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This lets any future CSS platforms to use RESET_TO_BL31 flag.
Change-Id: I32a90fce43cb0c6f4d33589653a0fd6a7ecc9577
Signed-off-by: Deepak Pandey <Deepak.Pandey@arm.com>
Before switching to new API the scp_bl2 handler was invoked from
bl2/bl2_image_load.c which was removed. Invoke the platform specific
scp_bl2 handler in analogy to ARM and HiSilicon.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
The BLE is the pre-TF-A boot stage required by Marvell Armada
BootROM for bringing up DRAM and allow the boot image copy to it.
Since this is not a standard boot level and only uses the TF-A
as a build environment, it was introduced out of source tree.
However it turns out that such remote location introduces additional
complexity to the upstream TF-A build process.
In order to simplify the build environment the BLE source folder
is relocated from the external repository to A8K platform directory.
The build documentation is updated accordingly.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Map the initialization code for BL31 to overlap with the memory
required for the secondary cores stack. Once BL31 has been
initialized the memory can be remapped to RW data so that it can
be used for secondary cores stacks. By moving code from .text to
.text.init the size of the BL31 image is decreased by a page.
Split arm_common.ld.S into two linker scripts, one for tzc_dram
(arm_tzc_dram.ld.S) and one for reclaiming initialization code
(arm_reclaim_init.ld.S) so that platforms can chose which memory
regions they wish to include.
Change-Id: I648e88f3eda1aa71765744cf34343ecda9320b32
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Mark the GICv3, CCI and CCN code only used in Bl31 initialization
with __init to be reclaimed once no longer needed.
Change-Id: I3d77f36758450d9d1d87ecc60bc1c63fe4082667
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Mark the initialization functions found in the BL31 boot sequence
as __init so they can be reclaimed when no longer needed.
Change-Id: I687a89346419c7710ef5097feaa325d83c527697
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Remove ARM_MAP_BL_ROMLIB memory region macro as it is now split
into two regions for code and data
Change-Id: Ic17b5b584933c196db29fe83051d7e0a8e92911c
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
- Fix build issue
- Add initial memory parameters descriptors for BL2
- Migrate to image load V2
Basic build and run test passed on MacchiatoBin board.
Need to fix the service CPU (CM3) image load procesure and test
OPTEE functionality, which probably will require additional work.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
This option makes it hard to optimize the memory definitions of all Arm
platforms because any change in the common defines must work in all of
them. The best thing to do is to remove it and move the definition to
each platform's header.
FVP, SGI and SGM were using the definitions in board_arm_def.h. The
definitions have been copied to each platform's platform_def.h. Juno
was already using the ones in platform_def.h, so there have been no
changes.
Change-Id: I9aecd11bbc72a3d0d7aad1ef9934d8df21dcfaf2
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
- Migrate to new GIC interfaces.
- Migrate to bl31_early_platform_setup2().
- Use bl31_warm_entrypoint() instead of psci_entrypoint().
- Use PLAT_VIRT_ADDR_SPACE_SIZE and PLAT_PHY_ADDR_SPACE_SIZE.
- Update Makefile paths.
- Remove references to removed build options.
- Use private definition of bl31_params_t.
Change-Id: I860341594b5c868b2fcaa59d23957ee718472ef1
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
- Migrate to bl31_early_platform_setup2().
- Remove references to removed build options.
- Replace zeromem16() by zeromem().
- Use private definition of bl31_params_t.
This is an incomplete migration, the platform doesn't currently compile.
Change-Id: I67fbf2206678be80c3a16692024221a131cec42f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
- mt6795: Migrate to new GIC interfaces.
- Remove support for PSCI platform compatibility layer.
- Migrate to bl31_early_platform_setup2().
- Migrate from cm_init_context() to cm_init_my_context().
- Use PLAT_VIRT_ADDR_SPACE_SIZE and PLAT_PHY_ADDR_SPACE_SIZE.
- Update Makefile paths.
- Use private definition of bl31_params_t.
This is an incomplete migration, mt6795 doesn't currently compile.
Change-Id: Icf9307637066cd6f2166524715e4f117f5ce2350
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
- Migrate to bl2_early_platform_setup2().
- Remove references to removed build options.
- Use private definition of bl31_params_t.
This is an incomplete migration, the platform doesn't currently compile.
Change-Id: I1ae477b1f2489f49b651528050fdf06e4a55e425
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
- Migrate to new GIC interfaces.
- Remove references to removed build options.
Change-Id: I6f90a33d5438a9d7b71be3f93e8d9da278c8c6e6
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
- Migrate to new GIC interfaces.
- Migrate to bl31_early_platform_setup2().
- Remove references to removed build options.
Change-Id: Ia7c63f75325ea4b41e32a9de3f01b0007d0ae210
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
- Migrate to bl31_early_platform_setup2().
- Remove references to removed build options.
Change-Id: Ie9f149e3fdec935f9329402ed3dd8e1c00b8832c
Acked-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
- Remove references to removed build options.
- Remove support for legacy GIC driver.
- Remove support for LOAD_IMAGE_V2=0.
Change-Id: I72f8c05620bdf4a682765e6e53e2c04ca749a3d5
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The affected interfaces are bl31_early_platform_setup(),
sp_min_early_platform_setup() and bl2_early_platform_setup().
Change-Id: I50c01ec68bcbe97fe4e5d101bcd0f763358b8e1e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The code of LOAD_IMAGE_V2=0 has been removed.
Change-Id: Iea03e5bebb90c66889bdb23f85c07d0c9717fffe
Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
ldts
Soby Mathew
Manish Pandey
Antonio Niño Díaz
Sudeep Holla
Konstantin Porotchkin
Haojian Zhuang
Andrew F. Davis
Dai Okamura
Masahiro Yamada
Deepak Pandey
Roberto Vargas
Chandni Cherukuri
Andre Przywara
Jerome Forissier
Grzegorz Jaszczyk
Jorge Ramirez-Ortiz
Yann Gautier
Sathees Balya
John Tsichritzis
Girish Pathak
Dimitris Papastamos
Daniel Boulby