Cortex-A710 erratum 2282622 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r2p0, and is fixed in r2p1. The workaround is to set
CPUACTLR2_EL1[0] to 1, which will force PLDW/PFRM ST to behave like
PLD/PRFM LD and not cause invalidations to other PE caches.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ic48409822536e9eacc003300036a1f0489593020
Add the possibility to configure console UART baudrate, it can be passed
as a command line parameter with STM32MP_UART_BAUDRATE. The default value
remains 115200.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I000df70c10b2b4dac1449556596f9820c36cf243
Following updates done
- Clarification on building Hafnium
- New test suite "Invalid memory access"
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I04a934a648d53a860f06cd6cf3776ee534675bd9
Cortex-A510 erratum 2172148 is a Cat B erratum that applies to revisions
r0p0, r0p1, r0p2, r0p3 and r1p0, and is fixed in r1p1.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I1784d643ca3d1d448340cd421facb5f229df1d22
Cortex-A510 erratum 2218950 is a Cat B erratum that applies to revisions
r0p0, r0p1, r0p2, r0p3 and r1p0, and is fixed in r1p1.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Icb6e369946f8978a08cf8ed5e4452782efb0a77a
Cortex-A510 erratum 2250311 is a Cat B erratum that applies to revisions
r0p0, r0p1, r0p2, r0p3 and r1p0 and is fixed in r1p1.
This erratum workaround is a bit different because it interacts with a
feature supported in TFA. The typical method of implementing an errata
workaround will not work in this case as the MPMM feature would just be
re-enabled by context management at every core power on after being
disabled by the errata framework. So in addition to disabling MPMM, this
workaround also sets a flag in the MPMM runtime framework indicating
that the feature should not be enabled even if ENABLE_MPMM=1.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I7805756e65ec90b6ef8af47e200617c9e07a3a7e
This patch submits an RFC to refactor the context management
mechanism in TF-A.
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Change-Id: Ia1ad5a85cb86c129e2feaf36bed123f0067c3965
Cortex-A510 erratum 2041909 is a Cat B erratum that applies to revision
r0p2 and is fixed in r0p3. It is also present in r0p0 and r0p1 but there
is no workaround in these revisions.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I7b1498faa0c79488dee0d11d07f6e9f58144e298
Cortex-A510 erratum 2042739 is a Cat B erratum that applies to revisions
r0p0, r0p1 and r0p2 and is fixed in r0p3.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I1d2ebee3914396e1e298eb45bdab35ce9e194ad9
Cortex-A510 erratum 2288014 is a Cat B erratum that applies to revisions
r0p0, r0p1, r0p2, r0p3 and r1p0, and is fixed in r1p1.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I875519ff55be90244cc3d3a7e9f7abad0fc3c2b8
Cortex-A510 erratum 1922240 is a Cat B erratum that applies to revision
r0p0 and is fixed in r0p1.
Since no errata framework code existed for A510 prior to this patch, it
has been added as well. Also some general cleanup changes in the CPU lib
makefile.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I8c427ef255cb4b38ed3e5c2c7444fcef957277e4
* changes:
docs(layerscape): add ls1046a soc and board support
feat(ls1046aqds): add board ls1046aqds support
feat(ls1046afrwy): add ls1046afrwy board support
feat(ls1046ardb): add ls1046ardb board support
feat(ls1046a): add new SoC platform ls1046a
fix(nxp-tools): fix tool location path for byte_swape
fix(nxp-qspi): fix include path for QSPI driver
build(changelog): add new scopes for NXP layerscape platforms
On Debian systems it is possible to use system-wide Crypto++ library.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ib01d9376776b8afcb1ca46c16076e28c3d2e581d
Update document for nxp-layerscape to add ls1046a SoC and ls1046ardb,
ls1046afrwy board support.
Also update maintainer of ls1046a platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I522f978bc93aa8d1f1d60fa8efef392b7d854df7
Armada 3720 BootROM searches for GPT partition with partition type GUID
6828311A-BA55-42A4-BCDE-A89BB5EDECAE and completely ignores GPT
partition name. It does not check for "MARVELL BOOT PARTITION".
This fact is incorrectly documented even in official Marvell Armada 3700
Functional Specification.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I35279f39de2d12148fc16f2730a9a074dc0b58eb
diphda platform is now being renamed to corstone1000.
These changes are to replace all the instances and traces
of diphda corstone1000.
Change-Id: I330f3a112d232b99b4721b6bf0236253b068dbba
Signed-off-by: Arpita S.K <Arpita.S.K@arm.com>
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Added a couple of sub-sections (Coverity Scan and Test Configuration)
under "Add build configuration" to update the patch owners on the
sections they need to be aware of while introducing new source files.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I84adb182f9633863aac864df43578249c2269c1e
Extract the UUID from the SP layout JSON file if the optional 'uuid'
field exists otherwise fall back to the current method for extracting
the SP UUID from the partition manifest file.
This change gives a way to decouple TF-A's dependency on the SP
manifest file's format which is tied to the SPMC.
Signed-off-by: Imre Kis <imre.kis@arm.com>
Change-Id: I13af066c1de58bfb9c3fd470ee137ea0275cd98c
Cortex-A710 erratum 2136059 is a Cat B erratum that applies to
revisions r0p0, r1p0 and r2p0 of the CPU. It is fixed in r2p1.
The workaround is to set CPUACTLR5_EL1[44] to 1 which will cause
the CPP instruction to invalidate the hardware prefetcher state
trained from any EL.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I43a86a365418fb663cc1b6ab1d365b4beddae0bc
Cortex-A710 erratum 2267065 is a Cat B erratum that applies to
revisions r0p0, r1p0 and r2p0 of the CPU. It is fixed in r2p1.
The workaround is to set CPUACTLR_EL1[22] to 1'b1. Setting
CPUACTLR_EL1[22] will cause the CFP instruction to invalidate
all branch predictor resources regardless of context.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Ia9085aaf9b2b6a2b25d03ab36bd3774839fac9aa
Cortex-X2 erratum 2216384 is a Cat B erratum that applies to
revisions r0p0, r1p0 and r2p0 of CPU. It is fixed in r2p1.
The workaround is to set CPUACTLR5_EL1[17] to 1'b1 followed by
applying an instruction patching sequence.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I3c216161678887c06a28c59644e784e0c7d37bab
Cortex-X2 erratum 2081180 is a Cat B erratum present in r0p0, r1p0
and r2p0 of the Cortex-X2 processor core.
Cortex-X2 SDEN: https://developer.arm.com/documentation/SDEN1775100
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I64bed2fd5b7e12932d6de2ae668786e689885188
Cortex-X2 erratum 2017096 is a Cat B erratum that applies to
revisions r0p0, r1p0 & r2p0. The workaround is to set CPUECLTR_EL1[8]
to 1 which disables store issue prefetching.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I3b740aedc95c2394f6b8d1186014d2b2f640ae05
The Qualcomm Snapdragon 410 is Qualcomm's first 64-bit SoC, released
in 2014 with four ARM Cortex-A53 cores. There are differents variants
(MSM8916, APQ8016(E), ...) that are all very similar. A popular device
based on APQ8016E is the DragonBoard 410c single-board computer,
but the SoC is also used in various mid-range smartphones/tablets.
This commit adds documentation for a minimal, community-maintained port
of TF-A/BL31 for MSM8916. The actual platform port is added in the
following four separate small commits to simplify the review process.
The code is primarily based on the information from the public
Snapdragon 410E Technical Reference Manual [1], combined with a lot of
trial and error to actually make it work.
Note that this port is a pure community effort without any
commercial interests and is not related to Qualcomm in any way.
The main motivation for this port is to have a minimal, updatable
firmware since this old chip does not receive many updates anymore from
Qualcomm. It works quite well for many use cases so I am willing to
maintain it as a "code owner". I have also added Nikita Travkin as
second code owner to help with reviews.
The main limitation so far is the lack of memory protection for TF-A.
This is similar to the ports for the Raspberry Pi but in this case not
a lack of hardware support but rather a lack of documentation. However,
this does not limit the usefulness of the port when used as a minimal
PSCI implementation.
[1]: https://developer.qualcomm.com/download/sd410/snapdragon-410e-technical-reference-manual.pdf
Change-Id: I676adf86061638cfc2f3ae8615470d145e84f172
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Add a platform hook for returning the boot index, i.e. the bank from
which the platform has booted the updatable firmware images. This
value will be passed to the Update Agent.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: Ic7bef21071c48cfc7b69c50e89df9ff758d95b00
The metadata structure copy is passed to the platform routine to set
the image source to boot the platform from. This is done by reading
the metadata structure. Pass the metadata as a read-only copy to the
routine -- the routine only needs to consume the metadata values and
should not be able to update the metadata fields.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I399cad99ab89c71483e5a32a1de0e22df304f8b0
* changes:
build(npm): mandate Node.js engine version
docs(changelog): fix broken version bumping
docs(changelog): fix version tag links
refactor(hooks): replace cz-conventional-changelog with cz-commitlint
style(commitlint): reorder header/body max line length fields
chore(npm): update package versions/license
The Standard Version tool will not recognize a release header as a
release header without the minor version, and will overwrite them when
generating the next release changelog.
Additionally, it will not generate a link to the tag diff unless a tag
of the form `vX.Y.Z` exists. We ought to generate tags with this version
format in the future to ensure the diff links are generated.
Change-Id: I7864ab7a5822f83ddb7a7917208d2d029ae34729
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change replaces cz-conventional-changelog with cz-commitlint, which
automatically configures Commitizen using our commitlint configuration
file. Currently, we use some manual Javascript magic to load our
Commitizen configuration into commitlint (the opposite of what's
introduced by this change), which can be removed.
With this change, we also move our commitlint configuration into a
new `changelog.yaml` file. This file holds the same data as `.cz.json`
previously did.
Change-Id: I14ff2308f1a0b2b293c2128b28ca2df578ce9c1c
Signed-off-by: Chris Kay <chris.kay@arm.com>
Added myself to be NXP common code and ls1028a, ls1043a platforms
maintainer.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Iadffc5600e9bb2e94b1d545b8dd1a819358cabcb
Update document for nxp-layerscape to add ls1043a SoC and ls1043ardb
board support.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I8442daf08a0f7c1ba982a3ed1d0ad24c4c420185
Remove old implementation for Layerscape ls1043a platform, and
will added it back with unified software architecture of all
Layerscape platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: If038c19ab04d70050ec8e6ab2097b1c4f8324e87
Measured-Boot and Trusted-Boot are orthogonal to each other and hence
removed dependency of Trusted-Boot on Measured-Boot by making below
changes -
1. BL1 and BL2 main functions are used for initializing Crypto module
instead of the authentication module
2. Updated Crypto module registration macro for MEASURED_BOOT with only
necessary callbacks for calculating image hashes
3. The 'load_auth_image' function is now used for the image measurement
during Trusted or Non-Trusted Boot flow
Change-Id: I3570e80bae8ce8f5b58d84bd955aa43e925d9fff
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Our list of possible Allwinner build targets was missing the newly
introduced R329 support. Fix that by adding a table with maps the SoC
names to the build target names.
Also add some explanation about the recently introduced PSCI power
management providers.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Icf5e304562c3082552bf08d7b26904caf9074936
Document the newly introduced SUNXI_SETUP_REGULATORS build option, that
allows to disable PMIC regulator setup at build time.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Ie5fb0b7220426b67cfffc95df4cabb31a6ec174a
Cortex X2 erratum 2058056 is a Cat B erratum present in the X2 core.
It applies to revisions r0p0, r1p0, and r2p0 and is still open.
There are 2 ways this workaround can be accomplished, the first of
which involves executing a few additional instructions around MSR
writes to CPUECTLR when disabling the prefetcher. (see SDEN for
details)
However, this patch implements the 2nd possible workaround which sets
the prefetcher into its most conservative mode, since this workaround
is generic.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Idb20d9928c986616cd5bedf40bb29d46d384cfd3
Cortex X2 erratum 2002765 is a Cat B erratum present in the X2 core.
It applies to revisions r0p0, r1p0, and r2p0 and is still open.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I11576a03bfd8a6b1bd9ffef4430a097d763ca3cf
Cortex X2 erratum 2083908 is a Cat B erratum present in the Cortex
X2 core. It applies to revision r2p0 and is still open.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Id9dca2b042bf48e75fb3013ab37d1c5925824728
Threat model for the current, BL1-only R-class support.
Signed-off-by: Gary Morrison <gary.morrison@arm.com>
Change-Id: I8479d5cb30f3cf3919281cc8dc1f21cada9511e0
Document `boot-order` field from FF-A partitions manifest, in accordance
to Hafnium's (SPM) implementation.
Signed-off-by: J-Alves <joao.alves@arm.com>
Change-Id: I9fd070100ee52e0d465d2cce830cc91d78bddfc0
This patch adds macros explicit to the features - FEAT_FGT,FEAT_AMUv1
and FEAT_ECV respectively. It assists in controlled access to the set
of registers (HDFGRTR_EL2, HAFGRTR_EL2 and CNTPOFF_EL2) under the
influence of these features during context save and restore routines.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I5082ea6687a686d8c5af3fe8bf769957cf3078b0
Added a platform function to measure the critical data and record its
measurement.
Also, corrected a return value of 'plat_mboot_measure_image' function
in the documentation.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I576676f654e517c2010ca1d5a87a1f7277d581c3
Updated the v2.6 change-log for below:
1. Moved ETE/ETM related changes under separate scope
2. Added manually commit log for Demeter CPU
Change-Id: Ib5b5f994f603af6c82b1400256752581a7931268
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This macro was used for the legacy boot mode on SPM32MP platforms.
The recommended boot method is now FIP.
The code under this macro will be removed after tag v2.7.
Change-Id: Id3b7baea2d3e6ea8b36a4cd0b107cb92591a172b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Update SPM's threat model to contain threats related to notifications
feature, compliant with FF-A v1.1 spec.
Change-Id: I4a825be5dd14137a0d04d532adfe5343714794c5
Signed-off-by: J-Alves <joao.alves@arm.com>
For future reference, this changelog was generated with the following
command:
npm run release -- --skip.commit --skip.tag --release-as 2.6.0
Change-Id: Idf6be5c3be15ddfdb1d32fafb9e0e4b399b269f3
Signed-off-by: Chris Kay <chris.kay@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
- Overview of FF-A v1.1 notifications feature, and list of all
the new related interface.
- FFA_RXTX_UNMAP now implemented, so provided description.
- FF-A v1.1 interfaces documented: FFA_SPM_ID_GET and
FFA_SECONDARY_EP_REGISTER.
Signed-off-by: J-Alves <joao.alves@arm.com>
Change-Id: If40b4d2b2473f81ecfb2ddbf14852c3f10682867
This change adds a new documentation page describing the commit style,
acceptable Conventional Commits types and scopes, and documents the
process for expanding the list of scopes.
Change-Id: Iad957b67fa71a879e8aa0790c58a5b08cec300d6
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change introduces a new NPM run script to automatically generate
the release changelog, as well as bump version numbers across the
code-base and create the release tag.
This script runs [Standard Version] to execute this, which is a tool
designed around automating substantial parts of the release process.
This can be done by running:
npm run release -- [<standard-version args>]
Standard Version expects the project to adhere to the [Semantic
Versioning] convention which TF-A does not, so you may need to specify
the version manually, e.g.:
npm run release -- --release-as 2.6.0
Individual steps of the release process may also be skipped at-will,
which may be necessary when, for example, tweaking the changelog:
npm run release -- --skip.commit --skip.tag
Standard Version is configured by the `.versionrc.js` file, which
contains information about the Conventional Commits types and scopes
used by the project, and how they map to the changelog.
To maintain continuity with the existing changelog style - at least to
the extent possible in the move from manual to automatic creation - a
customized changelog template has been introduced, based on the
Conventional Commits template provided by Standard Version.
This template package extends the Conventional Commits template package
by introducing support for parsing the Conventional Commits scopes into
changelog sections, similarly to how they were previously organized.
[Standard Version]:
https://github.com/conventional-changelog/standard-version
[Semantic Versioning]: https://semver.org
Change-Id: I5bafa512daedc631baae951651c38c1c62046b0a
Signed-off-by: Chris Kay <chris.kay@arm.com>
This changes adds support for building Markdown documentation into
Sphinx with [MyST]. We'll make use of this in a later patch, where we
introduce automatically-generated Markdown documentation that needs to
be compiled as part of the Sphinx documentation.
[MyST]: https://myst-parser.readthedocs.io/en/latest
Change-Id: I2a241a588c579fac1a81e1853479908928be1fc8
Signed-off-by: Chris Kay <chris.kay@arm.com>
Updates the Node.js version installed by the prerequisite instructions
from v14 to v16, which is the latest LTS release.
The instructions for installing the Node Version Manager (NVM) have
also been updated for v0.39.0 (previously v0.38.0).
Change-Id: I85528b3906305914ba6169b4dc5aafcf5b36a339
Signed-off-by: Chris Kay <chris.kay@arm.com>
Updates the Python dependencies used to build the project's Sphinx
documentation to their latest versions.
Change-Id: I8baee89c85179a667a3850a7b9705ab76f4d702a
Signed-off-by: Chris Kay <chris.kay@arm.com>
Recently some of our dependencies' dependencies have come into conflict
and are now causing errors when trying to install the Python
requirements. This change introduces `requirements.in` - a list of our
own direct dependencies, and pins them to specific versions.
The existing `requirements.txt` file is now automatically generated by
the `pip-compile` tool - part of the pip-tools package - and ensures
that our dependency tree is also pinned. This is a manual process at
present, but our dependencies are updated infrequently enough that it's
not introducing any major overhead.
Change-Id: I3cd0c11a1a4eccaf0d77b538cfdb94474833b811
Signed-off-by: Chris Kay <chris.kay@arm.com>
In this change the `FFA` substitution has been renamed to `FF-A`, as
well as the term it substitutes to - the `FFA` term does not exist.
Change-Id: I0c33d00d82a5498f7088e6a2b088a0006dfe7f65
Signed-off-by: Chris Kay <chris.kay@arm.com>
As spm_mm cannot handle SVE/SME usage in NS world so its better to give
compilation error when ENABLE_SVE_FOR_NS=1 or ENABLE_SME_FOR_NS=1.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I69dbb272ca681bb020501342008eda20d4c0b096
This patch expands the RME documentation with description of TF-A
changes for RME. It also modifies some other parts of TF-A documentation
to account for RME changes.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I9e6feeee235f0ba4b767d239f15840f1e0c540bb
This patch adds some documentation for the GPT library as well as adds
code owners for it.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: If1cd79626eadb27e1024d731b26ee2e20af74a66
This patch adds two new compile time options to enable SME in TF-A:
ENABLE_SME_FOR_NS and ENABLE_SME_FOR_SWD for use in non-secure and
secure worlds respectively. Setting ENABLE_SME_FOR_NS=1 will enable
SME for non-secure worlds and trap SME, SVE, and FPU/SIMD instructions
in secure context. Setting ENABLE_SME_FOR_SWD=1 will disable these
traps, but support for SME context management does not yet exist in
SPM so building with SPD=spmd will fail.
The existing ENABLE_SVE_FOR_NS and ENABLE_SVE_FOR_SWD options cannot
be used with SME as it is a superset of SVE and will enable SVE and
FPU/SIMD along with SME.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Iaaac9d22fe37b4a92315207891da848a8fd0ed73
Add documentation to build and run a PoC based on the OP-TEE toolkit
to show how TF-A Measured Boot can interact with a third party (f)TPM
service.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I11ac99c4ff54ea52aba0731aa7f707d7cd0c4216
Neoverse V1 erratum 2216392 is a Cat B erratum present in the V1 core.
It applies to revisions r1p0 and r1p1 and is still open. The issue is
also present in r0p0 but there is no workaround in that revision.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1401781
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ic2f90d79c75e8ffef01aac81eddf1bfd8b7164ab
This patch adds a brief description of S-EL0 partition support in the
SPMC using ARMv8.1 FEAT_VHE.
Signed-off-by: Raghu Krishnamurthy <raghu.ncstate@gmail.com>
Change-Id: Ie079265476604f62d5f2a66684f01341000969d0
Cortex A78 erratum 2242635 is a Cat B erratum present in the A78 Core.
It applies to revisions r1p0, r1p1, r1p2, and is still open. The issue
is also present in r0p0 but there is no workaround for this revision.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1401784
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ieca024254cabbc683ff13a70f3aeb8f2f3c5ce07
Neoverse-N2 erratum 2280757 is a Cat B erratum that applies to
revision r0p0 of CPU. It is still open. The workaround
is to set CPUACTLR_EL1[22] to 1'b1. Setting CPUACTLR_EL1[22]
will cause CFP instruction to invalidate all branch predictor
resources regardless of context.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest
Signed-off-by: nayanpatel-arm <nayankumar.patel@arm.com>
Change-Id: I615bcc1f993c45659b8b6f1a34fca0eb490f8add
Neoverse-N2 erratum 2242400 is a Cat B erratum that applies to
revision r0p0 of CPU. It is still open. The workaround
is to set CPUACTLR5_EL1[17] to 1'b1 followed by setting few
system control registers to specific values as per attached
SDEN document.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest
Signed-off-by: nayanpatel-arm <nayankumar.patel@arm.com>
Change-Id: I6a9cb4a23238b8b511802a1ee9fcc5b207137649
Neoverse-N2 erratum 2138958 is a Cat B erratum that applies to
revision r0p0 of CPU. It is still open. The workaround
is to set CPUACTLR5_EL1[13] to 1'b1.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest
Signed-off-by: nayanpatel-arm <nayankumar.patel@arm.com>
Change-Id: I5247f8f8eef08d38c169aad6d2c5501ac387c720
Neoverse-N2 erratum 2242415 is a Cat B erratum that applies to
revision r0p0 of CPU. It is still open. The workaround
is to set CPUACTLR_EL1[22] to 1'b1. Setting CPUACTLR_EL1[22]
will cause CFP instruction to invalidate all branch predictor
resources regardless of context.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest
Signed-off-by: nayanpatel-arm <nayankumar.patel@arm.com>
Change-Id: I442be81fbc32e21fed51a84f59584df17f845e96
Update supported models list according to changes for v2.6 release in
ci/tf-a-ci-scripts repository:
* general FVP model update: d10c1b9
* gic600 update: aa2548a
* CSS prebults model update: f1c3a4f
Signed-off-by: Maksims Svecovs <maksims.svecovs@arm.com>
Change-Id: If2841f05238facb3cace7d5c8a78083d54f35e27
johpow01
Madhukar Pappireddy
Bipin Ravi
Yann Gautier
Yann Gautier
Rex-BC Chen
Manish Pandey
Soby Mathew
Pali Rohár
Jiafei Pan
Vishnu Banavath
Ying-Chun Liu (PaulLiu)
Jayanth Dodderi Chidanand
Imre Kis
Stephan Gerhold
Sughosh Ganu
Joanna Farley
Sandrine Bailleux
Chris Kay
Manish V Badarkhe
André Przywara
Mark Dykes
Gary Morrison
J-Alves
Rex-BC Chen
Olivier Deprez
Zelalem Aweke
Javier Almansa Sobrino
Raghu Krishnamurthy
nayanpatel-arm
Maksims Svecovs