Trusted Services had removed secure storage and added two new
trusted services - Protected Storage and Internal Trusted Storage.
Hence we are removing secure storage and adding support for the
internal trusted storage.
And enable external SP images in BL2 config for TC, so that
we do not have to modify this file whenever the list of SPs
changes. It is already implemented for fvp in the below commit.
commit 33993a3737
Author: Balint Dobszay <balint.dobszay@arm.com>
Date: Fri Mar 26 15:19:11 2021 +0100
feat(fvp): enable external SP images in BL2 config
Change-Id: I3e0a0973df3644413ca5c3a32f36d44c8efd49c7
Signed-off-by: Davidson K <davidson.kumaresan@arm.com>
Define default SD buffer address and size in DRAM.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I5872d95b0c1114e05f0e145756e9a6ef39b2fd9a
SoC code can define supported features, otherwise use default setting.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I0f11498c1f7558ff0ec2d9b344f3f7a4f5489ced
Define common register macro both for Cortex-A53 and Cortex-A72
because the code will be used by both Cortex platform.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I485661bfe3ed4f214c403ff6af53dc6af1ddf089
Add CCI and EPU base address definiton for Chassis v3.2.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I13250555b6646c1e7ba2e9d7c9efca8501f17b3a
EMI MPU stands for external memory interface memory protect unit.
MT8195 supports 32 regions and 16 domains.
We add basic drivers currently, and will add more setting for
EMI MPU in next patch.
Change-Id: Iedc19d8f6fcf1ceb2d8241319b8dc17c885642dd
Signed-off-by: Penny Jan <penny.jan@mediatek.com>
This patch enables Trusted Boot on the i.MX8MP with BL2 doing image
verification from a FIP prior to hand-over to BL31.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: Iac1d1d62ea9858f67326a47c1e5ba377f23f9db5
Adds bl2 with FIP to the build required for mbed Linux booting where
we do:
BootROM -> SPL -> BL2 -> OPTEE -> u-boot
If NEED_BL2 is specified then BL2 will be built and BL31 will have its
address range modified upwards to accommodate. BL31 must be loaded from a
FIP in this case.
If NEED_BL2 is not specified then the current BL31 boot flow is unaffected
and u-boot SPL will load and execute BL31 directly.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I78914d6002755f733ea866127cb47982a00f9700
This commit makes the image load logic from imx8mm common for all
imx8m platform.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: Ibfe2e9cc09d198cb9e309afaf381a0237a4b82ed
Adds a number of definitions consistent with the established RSB3720
equivalents specifying number of io_handles and block devices.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I401e48216d67257137351ee4d0b98904a76fa789
This commit makes imx image io-storage logic common for all
imx platform.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I15045ac8f9dfa8cb714e32f9e7475d5eae4e86e4
Allows for exporting of FIP related methods cleanly in a private header.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: Iaaad4e69ef89c8a8a74648647d7fd09cd0fdd12a
In the SCMI power domain off handling, configure GIC
to prevent interrupt toward to the core to be turned off,
and configure CCN to disable coherency when the cluster is turned off.
The same operation is done in SCPI power domain off processing.
This commit adds the missing operation in SCMI power domain
off handling.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: Ib3523de488500c2e8bdc74e4cb8772a1442d9781
In case the WDT is enabled by prior stage, keep it enabled.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Ie7c0eaf2f59dd8c30a9ef686a7000424f38d6352
Because the Realtime module stop control register n (RMSTPCRn)
are not supported in R-Car D3. Therefore, remove access to these
registers in R-Car D3.
Signed-off-by: Hideyuki Nitta <hideyuki.nitta.jf@hitachi.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I4647e28d0e176ff97151e9842019ba12cefe5c03
- Added the condition where output the SSCG (MD12) setting
to log for R-Car D3.
- Added the process to switching the bit rate of SCIF by the
SSCG (MD12) setting value for R-Car D3.
Signed-off-by: Hideyuki Nitta <hideyuki.nitta.jf@hitachi.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: Iaf07fa4df12dc233af0b57569ee4fa9329f670a9
Because the x6 and x7 registers will be overwritten by the callee function,
added the processing the register's value push to/pop from stack memory.
Signed-off-by: Hideyuki Nitta <hideyuki.nitta.jf@hitachi.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I5351a008d3b208a30a8bc8651b8d9b4d1a02a8e8
Added the process of SYSECEXTMASK bit set/clear for following
power Resume/Shutoff flow.
Signed-off-by: Hideyuki Nitta <hideyuki.nitta.jf@hitachi.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I71ed22840a42e7ab7d87bfd4241eec6f5ddb129b
The memory area size of OP-TEE was changed from 1MB to 2MB
because the size of OP-TEE has increased.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: Ic8a165c83a3a9ef2829f68d5fabeed9ccb6da95e
The new M3 DRAM size can be determined by the PRR cut version.
Read the PRR cut version, and if it is older than cut 30, use
legacy DRAM size scheme, else report 8GB in 2GBx4 2ch split.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> # Fix DRAM size judgment by PRR register, reword commit message
Change-Id: Ib83176d0d09cab5cae0119ba462e42c66c642798
Fix to support of booting from eMMC (50MHz x 8) on
Draak board for R-Car D3.
Signed-off-by: Hideyuki Nitta <hideyuki.nitta.jf@hitachi.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I0ab2b5c7f8075acbf5f4a69694fb535dddc1a4c8
Added the process of judgment and logging for R-Car D3 Ver.1.1 and Ver.1.0.
Signed-off-by: Hideyuki Nitta <hideyuki.nitta.jf@hitachi.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: I326aa42374b70b6a4a71893561a7eaa0b6eddef0
Changed the plat/renesas/common/common.mk to change the source files
about GICv2 by include gicv2.mk, because gic_common.c has deprecated.
Signed-off-by: Hideyuki Nitta <hideyuki.nitta.jf@hitachi.com>
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Change-Id: Iaa7eae6b2c1dd79a05339325e6bc422d87bce49e
Erratum 1530924 affects Armada 37xx CPU, since it affects all Cortex-A53
revisions from r0p0 to r0p4.
Enable the workaround for this erratum.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I753225040e49e956788d5617cd7ce76d5e6ea8e8
BL2 passes FW_CONFIG to BL31 which contains information
about different DTBs present. BL31 then uses FW_CONFIG
to get the base address of HW_CONFIG and populate fconf.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: I0b4fc83e6e0a0b9401f692516654eb9a3b037616
This avoids duplicate define of TZC_REGION_NSEC_ALL_ACCESS_RDWR.
And remove the previous TZC400 definitions from stm32mp1_def.h.
Change-Id: I6c72c2a18731f69d855fbce8ce822a21da9364fa
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Add required code to support FCONF on STM32MP1 platform.
The new FW_CONFIG DT file will be inside the FIP, and loaded by BL2.
It will be used to configure the addresses where to load other binaries.
BL2 should be agnostic of which BL32 is in the FIP (OP-TEE or SP_min),
so optee_utils.c is always compiled, and some OP-TEE flags are removed.
Change-Id: Id957b49b0117864136250bfc416664f815043ada
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Instead of using a scratch buffer of 512 bytes, we can directly use the
image address and max size. The mmc_block_dev_spec struct info is then
overwritten for each image with this info, except FW_CONFIG and GPT
table which will still use the scratch buffer.
This allows using multiple blocks read on MMC, and so improves the boot
time.
A cache invalidate is required for the remaining data not used from the
first and last blocks read. It is not required for FW_CONFIG_ID,
as it is in scratch buffer in SYSRAM, and also because bl_mem_params
struct is overwritten in this case. This should also not be done if
the image is not found (OP-TEE extra binaries when using SP_min).
Change-Id: If3ecfdfe35bb9db66284036ca49c4bd1be4fd121
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
BL2 still uses the STM32 header binary format to be loaded from ROM code.
BL32 and BL33 and their respective device tree files are now put together
in a FIP file.
One DTB is created for each BL. To reduce their sizes, 2 new dtsi file are
in charge of removing useless nodes for a given BL. This is done because
BL2 and BL32 share the same device tree files base.
The previous way of booting is still available, the compilation flag
STM32MP_USE_STM32IMAGE has to be set to 1 in the make command. Some files
are duplicated and their names modified with _stm32_ to avoid too much
switches in the code.
Change-Id: I1ffada0af58486d4cf6044511b51e56b52269817
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Protect BL32 (SP_min) with MMU if OP-TEE is not used.
Validate OP-TEE header with optee_header_is_valid().
Use default values in bl2_mem_params_descs[]. They will be overwritten
in bl2_plat_handle_post_image_load() if OP-TEE is used.
Change-Id: I8614f3a17caa827561614d0f25f30ee90c4ec3fe
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Embarrassingly we never told the non-secure world that secure firmware
lives in the first few hundred KBs of DRAM, so any non-secure payload
could happily overwrite TF-A, and we couldn't even blame it.
Advertise the BL31 region in the reserved-memory DT node, so non-secure
world stays out of it.
This fixes Linux booting on FPGAs with less memory than usual.
Change-Id: I7fbe7d42c0b251c0ccc43d7c50ca902013d152ec
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* changes:
refactor(plat/nxp): refine api to read SVR register
refactor(plat/nxp): each errata use a seperate source file
refactor(plat/nxp): use a unified errata api
refactor(plat/soc-lx2160): move errata to common directory
At the moment we specified the BL31 memory limits to 1MB; since we
typically have gigabytes of DRAM, we can be quite generous.
However the default parameters expect the devicetree binary at
0x80070000, so we should actually make sure we have no code or data
beyond that point.
Limit the ARM FPGA BL31 memory footprint to this available 7*64K region.
We stay within the limit at the moment, with more than half of it
reserved for stacks, so this could be downsized later should we run
into problems.
The PIE addresses stay as they are, since the default addresses do not
apply there anywhere, and the build is broken anyway.
Change-Id: I7768af1a93ff67096f4359fc5f5feb66464bafaa
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Currently the list of SP UUIDs loaded by BL2 is hardcoded in the DT.
This is a problem when building a system with other SPs (e.g. from
Trusted Services). This commit implements a workaround to enable adding
SP UUIDs to the list at build time.
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Change-Id: Iff85d3778596d23d777dec458f131bd7a8647031
Up until now we relied on the GICs used in our FPGA images to be GICv3
compliant, without the "direct virtual injection" feature (aka GICv4)
enabled.
To support newer images which have GICv4 compliant GICs, enable the
newly introduced GICv4 detection code, and use that also when we adjust
the redistributor region size in the devicetree.
This allows the same BL31 image to be used with GICv3 or GICv4 FPGA
images.
Change-Id: I9f6435a6d5150983625efe3650a8b7d1ef11b1d1
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
At the moment we have a GIC_ENABLE_V4_EXTN build time variable to
determine whether the GIC interrupt controller is compliant to version
4.0 of the spec or not. This just changes the number of 64K MMIO pages
we expect per redistributor.
To support firmware builds which run on variable systems (emulators,
fast model or FPGAs), let's make this decision at runtime.
The GIC specification provides several architected flags to learn the
size of the MMIO frame per redistributor, we use GICR_TYPER[VLPI] here.
Provide a (static inline) function to return the size of each
redistributor.
We keep the GIC_ENABLE_V4_EXTN build time variable around, but change
its meaning to enable this autodetection code. Systems not defining this
rely on a "pure" GICv3 (as before), but platforms setting it to "1" can
now deal with both configurations.
Change-Id: I9ede4acf058846157a0a9e2ef6103bf07c7655d9
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
1. Refined struct soc_info_t definition.
2. Refined get_soc_info function.
3. Fixed some SVR persernality value.
4. Refined API to get cluster numbers and cores per cluster.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I3c20611a523516cc63330dce4c925e6cda1e93c4
This patch adds the necessary files to support
the SolidRun CN913X CEx7 Evaluation Board.
Because the DRAM connectivity and SerDes settings
is shared with the CN913X DB - reuse relevant
board-specific files.
Change-Id: I75a4554a4373953ca3fdf3b04c4a29c2c4f8ea80
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
The common makefile used by every a8k/cn913x platform
(a8k_common.mk) assumed default paths in PLAT_INCLUDES,
BLE/BL31_PORTING_SOURCES. Allow overriding those
variables, in order to avoid code duplication.
It can be helpful in case using multiple board variants
or sharing common settings between different platforms.
Change-Id: Idce603e44ed04d99fb1e3e11a2bb395d552e2bf7
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
* changes:
feat(plat/allwinner): add R329 support
refactor(plat/allwinner): allow custom BL31 offset
refactor(plat/allwinner): allow new AA64nAA32 position
fix(plat/allwinner): delay after enabling CPU power
Use a unfied API soc_errata() for each platforms,
add print a INFO message for each enabled errata,
so that it will be easy to check which errata is
enabled on current platform.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I5eab3f338db6b46c57cbad475819043fc60ca6d3
Will add more Erratas, some errata can be used for multiple
platforms, so move errata to be common code which can
be share between different platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Ib149b3eac365bdb593331e9f38f0b89d92c9c0d1
Allwinner R329 is a new dual-core Corte-A53 SoC. Add basical TF-A
support for it, to provide a PSCI implementation containing CPU
boot/shutdown and SoC reset.
Change-Id: I0fa37ee9b4a8e0e1137bf7cf7d614b6ca9624bfe
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>
Not all Allwinner SoCs have the same arrangement to SRAM A2.
Allow to specify a offset at which BL31 will stay in SRAM A2.
Change-Id: I574140ffd704a796fae0a5c2d0976e85c7fcbdf9
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>
In newer Allwiner SoCs, the AA64nAA32 wires are mapped to a new register
called "General Control Register0" in the manual rather than the
"Cluster 0 Control Register0" in older SoCs.
Now the position of AA64nAA32 (reg and bit offset) is defined in a few
macros instead assumed to be at bit offset 24 of
SUNXI_CPUCFG_CLS_CTRL_REG0.
Change-Id: I933d00b9a914bf7103e3a9dadbc6d7be1a409668
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>
Adds a 1us delay after enabling power to a CPU core, to prevent
inrush-caused CPU crash before it's up.
Change-Id: I8f4c1b0dc0d1d976b31ddc30efe7a77a1619b1b3
Signed-off-by: Icenowy Zheng <icenowy@sipeed.com>
Add TZC master source id for DMA in the SoC space and for the DMAs
behind the I/O Virtualization block to allow the non-secure transactions
from these DMAs targeting DRAM.
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Change-Id: I77a2947b01b4b49a7c1940f09cf62b7b5257657c
It was enabled in commit 3c7dcdac5c ("marvell/a3700: Prevent SError
accessing PCIe link while it is down") with a workaround for a bug found
in U-Boot and Linux kernel driver pci-aardvark.c (PCIe controller driver
for Armada 37xx SoC) which results in SError interrupt caused by AXI
SLVERR on external access (syndrome 0xbf000002) and immediate kernel
panic.
Now when proper patches are in both U-Boot and Linux kernel projects,
this workaround in TF-A should not have to be enabled by default
anymore as it has unwanted side effects like propagating all external
aborts, including non-fatal/correctable into EL3 and making them as
fatal which cause immediate abort.
Add documentation for HANDLE_EA_EL3_FIRST build option into Marvell
Armada build section.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ic92b65bf9923505ab682830afb66c2f6cec70491
A3700 plat_ea_handler was introduced into TF-A codebase just because of
bugs in U-Boot and Linux kernel PCIe controller driver pci-aardvark.c.
These bugs were finally fixed in both U-Boot and Linux kernel drivers:
eccbd4ad8ehttps://git.kernel.org/stable/c/f18139966d072dab8e4398c95ce955a9742e04f7
Add all these information into comments, including printing error
message into a3k plat_ea_handler. Also check that abort is really
asynchronous and comes from lower level than EL3.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I46318d221b39773d5e25b3a0221d7738736ffdf1
The GIC IP formerly known as "GIC Clayton" has been released under the
name of "GIC-700".
Rename occurences of Clayton in comments and macro names to reflect the
official name.
Change-Id: Ie8c55f7da7753127d58c8382b0033c1b486f7909
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Add support for runtime feature configuration which are running on the
firmware. Add new IOCTL IDs like IOCTL_SET_FEATURE_CONFIG and
IOCTL_GET_FEATURE_CONFIG for configuring the features.
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: I976aef15932783a25396b2adeb4c8f140cc87e79
Sync IOCTL IDs in order to avoid conflict with other components like,
Linux and firmware. Hence assigning value to IDs to make it more
specific.
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: I11ae679fbd0a953290306b62d661cc142f50dc28
after this commit: If15cf3b9d3e2e7876c40ce888f22e887893fe696
plat/qemu/common/qemu_pm.c:116: (entrypoint < (NS_DRAM0_BASE + NS_DRAM0_SIZE)))
the above line (NS_DRAM0_BASE + NS_DRAM0_SIZE) = 0x100000000, which will
overflow 32bit and cause ERROR
SO add ULL to fix it
tested on compiler:
gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))
Signed-off-by: Darren Liang <lwp513@qq.com>
Change-Id: I1d769b0803142d37bd2968d765ab04a9c7c5c21a
This patch adds the basic CPU library code to support the Demeter
CPU. This CPU is based on the Makalu-ELP core so that CPU lib code
was adapted to create this patch.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ib5740b748008a72788c557f0654d8d5e9ec0bb7f
As done recently for plat/tc0 in b5863cab9, enable AMU explicitly.
This is necessary as the recent changes that enable SVE for the secure
world disable AMU by default in the CPTR_EL3 reset value.
Change-Id: Ie3abf1dee8a4e1c8c39f934da8e32d67891f5f09
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
Now that the DDR is mapped secured, the security settings (TZC400
firewall) have to be applied at the end of BL2 for the OP-TEE case.
This is required to avoid checskum computation error on U-Boot binary,
for which MMU and TZC400 would not be aligned.
Change-Id: I4a364f7117960e8fae1b579f341b9f140b766ea6
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
The Tegra132 platforms have reached their end of life and are
no longer used in the field. Internally and externally, all
known programs have removed support for this legacy platform.
This change removes this platform from the Tegra tree as a result.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I72edb689293e23b63290cdcaef60468b90687a5a
Most DTBs used on the RaspberryPi contain a FDT /memreserve/ region,
that covers the original secondaries' spin table.
We need to reserve more memory than described there, to cover the whole
of the TF-A image, so we add a /reserved-memory node to the DTB.
However having the same memory region described by both methods upsets
the Linux kernel and U-Boot, so we have to make sure there is only one
instance describing this reserved memory.
Keep our currently used /reserved-memory node, since it's more capable
(it allows to mark the region as secure memory). Add some code to drop
the original /memreserve/ region, since we don't need this anymore,
because we take the secondaries out of their original spin loop.
We explicitly check for the currently used size of 4KB for this region,
to be alerted by any changes to this region in the upstream DTB.
Change-Id: Ia3105560deb3f939e026f6ed715a9bbe68b56230
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Put default ea handler implementation into function plat_default_ea_handler()
which just print verbose information and panic, so it can be called also
from overwritten / weak function plat_ea_handler() implementation.
Replace every custom implementation of printing verbose error message of
external aborts in custom plat_ea_handler() functions by a common
implementation from plat_default_ea_handler() function.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I15897f61b62b4c3c29351e693f51d4df381f3b98
* changes:
feat(plat/rcar3): emit RPC status to DT fragment if RPC unlocked
feat(plat/rcar3): add a DRAM size setting for M3N
feat(plat/rcar3): update IPL and Secure Monitor Rev.3.0.0
feat(plat/rcar3): add new board revision for Salvator-XS/H3ULCB
feat(drivers/rcar3): ddr: add function to judge a DDR rank
fix(drivers/rcar3): ddr: update DDR setting for H3, M3, M3N
fix(drivers/rcar3): i2c_dvfs: fix I2C operation
fix(drivers/rcar3): fix CPG registers redefinition
fix(drivers/rcar3): emmc: remove CPG_CPGWPR redefinition
fix(plat/rcar3): generate two memory nodes for larger than 2 GiB channel 0
refactor(plat/rcar3): factor out DT memory node generation
feat(plat/rcar3): add optional support for gzip-compressed BL33
* changes:
feat(io_mtd): offset management for FIP usage
feat(nand): count bad blocks before a given offset
feat(plat/st): add helper to save boot interface
fix(plat/st): improve DDR get size function
refactor(plat/st): map DDR secure at boot
refactor(plat/st): rework TZC400 configuration
This commit activates the stack protector feature for the diphda
platform.
Change-Id: Ib16b74871c62b67e593a76ecc12cd3634d212614
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
This renames tc0 platform folder and files to tc, and introduces
TARGET_PLATFORM variable to account for the differences between
TC0 and TC1.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: I5b4a83f3453afd12542267091b3edab4c139c5cd