* changes:
arm_fpga: Add platform documentation
arm_fpga: Add post-build linker script
arm_fpga: Add ROM trampoline
arm_fpga: Add devicetree file
arm_fpga: Remove SPE PMU DT node if SPE is not available
arm_fpga: Adjust GICR size in DT to match number of cores
fdt: Add function to adjust GICv3 redistributor size
drivers: arm: gicv3: Allow detecting number of cores
As the Arm Ltd. FPGA port is now working for all existing images, add
some documentation file.
Change-Id: I9e2c532ed15bbc121bb54b3dfc1bdfee8f1443a6
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
This patch adds support for Morello platform.
It is an initial port which includes only BL31 support
as the System Control Processor (SCP) is expected to take
the role of primary bootloader.
Change-Id: I1ecbe5a14a2d487b2ecea3c1ca227f08473ed2dd
Co-authored-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Signed-off-by: Chandni Cherukuri <chandni.cherukuri@arm.com>
Signed-off-by: Anurag Koul <anurag.koul@arm.com>
Cortex A77 erratum 1508412 is a Cat B Errata present in r0p0 and r1p0.
The workaround is a write sequence to several implementation defined
registers based on A77 revision.
This errata is explained in this SDEN:
https://static.docs.arm.com/101992/0010/Arm_Cortex_A77_MP074_Software_Developer_Errata_Notice_v10.pdf
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I217993cffb3ac57c313db8490e7b8a7bb393379b
Builds in Debug mode with Measured Boot enabled might run out of trusted
SRAM. This patch allows to change the Log Level at which the Measured Boot
driver will dump the event log, so the latter can be accessed even on
Release builds if necessary, saving space on RAM.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I133689e313776cb3f231b774c26cbca4760fa120
To avoid trapping from EL0/1, FPEN bits need to be set 0x3, not
clearing.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: Ic34e9aeb876872883c5f040618ed6d50f21dacd0
Neoverse N1 erratum 1868343 is a Cat B erratum, present in older
revisions of the Neoverse N1 processor core. The workaround is to
set a bit in the CPUACTLR_EL1 system register, which delays instruction
fetch after branch misprediction. This workaround will have a small
impact on performance.
SDEN can be found here:
https://documentation-service.arm.com/static/5f2c130260a93e65927bc92f
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I37da2b3b2da697701b883bff9a1eff2772352844
I am leaving Socionext. Orphan the UniPhier platform until somebody
takes the role.
Change-Id: I54d3da6d49c1ccaaa475431654db578b683db88a
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Updated the cot-binding documentation to add 'id'
property for the trusted and non-trusted nv-counters.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: If1c628c5b90fe403dd96c7cd0cd04f37288c965c
- Add some guidance about the type of information a patch author should
provide to facilitate the review (and for future reference).
- Make a number of implicit expectations explicit:
- Every patch must compile.
- All CI tests must pass.
- Mention that the patch author is expected to add reviewers and explain
how to choose them.
- Explain the patch submission rules in terms of Gerrit labels.
Also do some cosmetic changes, like adding empty lines, shuffling some
paragraphs around.
Change-Id: I6dac486684310b5a35aac7353e10fe5474a81ec5
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Add a section for that in the coding guidelines.
Change-Id: Ie6819c4df5889a861460eb96acf2bc9c0cfb494e
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Enable the spm_mm framework for the qemu_sbsa platform.
Memory layout required for spm_mm is created in secure SRAM.
Co-developed-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: I104a623e8bc1e44d035b95f014a13b3f8b33a62a
Documented the CPU specific build macros created for AT
speculative workaround.
Updated the description of 'ERRATA_SPECULATIVE_AT' errata
workaround option.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ie46a80d4e8183c1d5c8b153f08742a04d41a2af2
SP804 TIMER is not platform specific, and current code base adds
multiple defines to use this driver. Like FVP_USE_SP804_TIMER and
FVP_VE_USE_SP804_TIMER.
This patch removes platform specific build flag and adds generic
flag `USE_SP804_TIMER` to be set to 1 by platform if needed.
Change-Id: I5ab792c189885fd1b98ddd187f3a38ebdd0baba2
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Ensuring that each file changed by a patch has the correct copyright and
license information does not only apply to documentation files but to
all files within the source tree.
Move the guidance for copyright and license headers out of the paragraph
about updating the documentation to avoid any confusion.
Also do some cosmetic changes (adding empty lines, fitting in longer
lines in the 80-column limit, ...) to improve the readability of the RST
file.
Change-Id: I241a2089ca9db70f5a9f26b7070b947674b43265
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
We have noticed that Phabricator (the ticketing system on tf.org [1])
has far less visibility within the community than the mailing list [2].
For this reason, let's drop usage of Phabricator for anything else than
bug reports. For the rest, advise contributors to start a discussion on
the mailing list, where they are more likely to get feedback.
[1] https://developer.trustedfirmware.org/project/board/1/
[2] https://lists.trustedfirmware.org/mailman/listinfo/tf-a
Change-Id: I7d2d3d305ad0a0f8aacc2a2f25eb5ff429853a3f
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
This patch fixes the bug when AMUv1 group1 counters was
always assumed being implemented without checking for its
presence which was causing exception otherwise.
The AMU extension code was also modified as listed below:
- Added detection of AMUv1 for ARMv8.6
- 'PLAT_AMU_GROUP1_NR_COUNTERS' build option is removed and
number of group1 counters 'AMU_GROUP1_NR_COUNTERS' is now
calculated based on 'AMU_GROUP1_COUNTERS_MASK' value
- Added bit fields definitions and access functions for
AMCFGR_EL0/AMCFGR and AMCGCR_EL0/AMCGCR registers
- Unification of amu.c Aarch64 and Aarch32 source files
- Bug fixes and TF-A coding style compliant changes.
Change-Id: I14e407be62c3026ebc674ec7045e240ccb71e1fb
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Adding support for QTI CHIP SC7180 on ATF
Change-Id: I0d82d3a378036003fbd0bc4784f61464bb76ea82
Signed-off-by: Saurabh Gorecha <sgorecha@codeaurora.org>
Co-authored-by: Maulik Shah <mkshah@codeaurora.org>
If the user tries to change BUILD_BASE to put the build products outside
the build tree the compile will fail due to hard coded assumptions that
$BUILD_BASE is a relative path. Fix by using $(abspath $(BUILD_BASE))
to rationalize to an absolute path every time and remove the relative
path assumptions.
This patch also adds documentation that BUILD_BASE can be specified by
the user.
Signed-off-by: Grant Likely <grant.likely@arm.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib1af874de658484aaffc672f30029b852d2489c8
These broken links were found with the help of this command:
$> sphinx-build -M linkcheck . build
A sample broken link is reported as follows:
(line 80) -local- firmware-design.rst#secure-el1-payloads-and-dispatchers
Change-Id: I5dcefdd4b8040908658115647e957f6c2c5da7c2
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Provide manifest and build options to boot OP-TEE as a
guest S-EL1 Secure Partition on top of Hafnium in S-EL2.
Increase ARM_SP_MAX_SIZE to cope with OP-TEE debug build image.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Idd2686fa689a78fe2d05ed92b1d23c65e2edd4cb
Openssl directory path is hardcoded to '/usr' in the makefile
of certificate generation and firmware encryption tool using
'OPENSSL_DIR' variable.
Hence changes are done to make 'OPENSSL_DIR' variable as
a build option so that user can provide openssl directory
path while building the certificate generation and firmware
encryption tool.
Also, updated the document for this newly created build option
Change-Id: Ib1538370d2c59263417f5db3746d1087ee1c1339
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
The purpose of rx_training had changed after last update. Currently it
is not supposed to help with providing static parameters for porting
layer. Instead, it aims to suit the parameters per connection.
Change-Id: I2a146b71e2e20bd264c090a9a627d0b6bc56e052
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Add references to the OcteonTX2 CN913x family.
Change-Id: I172a8e3d061086bf4843acad014c113c80359e01
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
The link to the exception handling framework page on the System Design /
Firmware Design / Section 4.3 just links to itself, so I changed it to
link to the exception handling framework component document.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I6711b423a789b2b3d1921671e8497fffa8ba33d1
Currently, 'SMCCC_ARCH_FEATURES' SMC call handler unconditionally
returns 'SMC_OK' for 'SMCCC_ARCH_SOC_ID' function. This seems to
be not correct for the platform which doesn't implement soc-id
functionality i.e. functions to retrieve both soc-version and
soc-revision.
Hence introduced a platform function which will check whether SMCCC
feature is available for the platform.
Also, updated porting guide for the newly added platform function.
Change-Id: I389f0ef6b0837bb24c712aa995b7176117bc7961
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This reverts commit 11af40b630, reversing
changes made to 2afcf1d4b8.
This errata workaround did not work as intended so we are reverting this
change. In the future, when the corrected workaround is published in an
SDEN, we will push a new workaround.
This is the patch being reverted:
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/4750
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I20aa064c1bac9671939e657bec269d32b9e75a97
Update SGI-575, RD-E1-Edge and RD-N1-Edge FVP versions to 11.10/36 and
add RD-N1-Edge-Dual to the list of supported Arm Fixed Virtual
Platforms.
Change-Id: I9e7e5662324eeefc80d799ca5341b5bc4dc39cbb
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
* changes:
plat/arm/board/fvp: Add support for Measured Boot
TF-A: Add support for Measured Boot driver to FCONF
TF-A: Add support for Measured Boot driver in BL1 and BL2
TF-A: Add Event Log for Measured Boot
TF-A: Add support for Measured Boot driver
This patch adds support for Measured Boot functionality
to FVP platform code. It also defines new properties
in 'tpm_event_log' node to store Event Log address and
it size
'tpm_event_log_sm_addr'
'tpm_event_log_addr'
'tpm_event_log_size'
in 'event_log.dtsi' included in 'fvp_tsp_fw_config.dts'
and 'fvp_nt_fw_config.dts'. The node and its properties
are described in binding document
'docs\components\measured_boot\event_log.rst'.
Change-Id: I087e1423afcb269d6cfe79c1af9c348931991292
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Former EL3 Secure Partition Manager using MM protocol is renamed
Secure Partition Manager (MM).
A new Secure Partition Manager document covers TF-A support for the
PSA FF-A compliant implementation.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I9763359c2e96181e1726c8ad72738de293b80eb4
This patch adds the following models
FVP_Base_Neoverse-E1x1
FVP_Base_Neoverse-E1x2
FVP_Base_Neoverse-E1x4
to the list of supported FVP platforms.
Change-Id: Ib526a2a735f17724af3a874b06bf69b4ca85d0dd
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
docker (container) is another way to build the documentation and fortunately
there is already a docker image (sphinxdoc/sphinx) with sphinx so we can use
it to generate the documentation.
Change-Id: I06b0621cd7509a8279655e828680b92241b9fde4
Signed-off-by: Leonardo Sandoval <leonardo.sandoval@linaro.org>
The LLC SRAM will be enabled in OP-TEE OS for usage as secure storage.
The CCU have to prepare SRAM window, but point to the DRAM-0 target
until the SRAM is actually enabled.
This patch changes CCU SRAM window target to DRAM-0
Remove dependence between LLC_SRAM and LLC_ENABLE and update the
build documentation.
The SRAМ base moved to follow the OP-TEE SHMEM area (0x05400000)
Change-Id: I85c2434a3d515ec37da5ae8eb729e3280f91c456
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
The i.MX 8MP Media Applications Processor is part of the growing
i.MX8M family targeting the consumer and industrial market. It brings
an effective Machine Learning and AI accelerator that enables a new
class of applications. It is built in 14LPP to achieve both high
performance and low power consumption and relies on a powerful fully
coherent core complex based on a quad core Arm Cortex-A53 cluster and
Cortex-M7 low-power coprocessor, audio digital signal processor, machine
learning and graphics accelerators.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I98311ebc32bee20af05031492e9fc24d06e55f4a
Added a build option 'COT_DESC_IN_DTB' to create chain of trust
at runtime using fconf.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I92b257ac4ece8bbf56f05a41d1e4056e2422ab89
Updated the CoT binding document to show chain of trust relationship
with the help of 'authentication method' and 'authentication data'
instead of showing content of certificate and fixed rendering issue
while creating html page using this document.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ib48279cfe786d149ab69ddc711caa381a50f9e2b
Fix the version inconsistency in the same file.
I tested QEMU 5.0.0, and it worked for me.
Change-Id: I9d8ca9aae1e413410eb5676927e13ae4aee9fad8
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In my understanding, /dev/vda2 does not exist unless you add
virtio drive to the qemu command line.
The rootfs is already specified by '-initrd rootfs.cpio.gz'.
Change-Id: Ifdca5d4f3819d87ef7e8a08ed870872d24b86370
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit solves the limitation, "No build instructions for
QEMU_EFI.fd and rootfs-arm64.cpio.gz"
Document the steps to build them.
Change-Id: Ic6d895617cf71fe969f4aa9820dad25cc6182023
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Fix all external broken links reported by Sphinx linkcheck tool.
This does not take care of broken cross-references between internal
TF-A documentation files. These will be fixed in a future patch.
Change-Id: I2a740a3ec0b688c14aad575a6c2ac71e72ce051e
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
There were some links in the file "ras.rst" which were broken, this
patch fixes all the broken links in this file.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I00cf080e9338af5786239a4843cb4c2e0cc9d99d
* changes:
plat: marvell: armada: a8k: add OP-TEE OS MMU tables
drivers: marvell: add support for mapping the entire LLC to SRAM
plat: marvell: armada: add LLC SRAM CCU setup for AP806/AP807 platforms
plat: marvell: armada: reduce memory size reserved for FIP image
plat: marvell: armada: platform definitions cleanup
plat: marvell: armada: a8k: check CCU window state before loading MSS BL2
drivers: marvell: add CCU driver API for window state checking
drivers: marvell: align and extend llc macros
plat: marvell: a8k: move address config of cp1/2 to BL2
plat: marvell: armada: re-enable BL32_BASE definition
plat: marvell: a8k: extend includes to take advantage of the phy_porting_layer
marvell: comphy: initialize common phy selector for AP mode
marvell: comphy: update rx_training procedure
plat: marvell: armada: configure amb for all CPs
plat: marvell: armada: modify PLAT_FAMILY name for 37xx SoCs
Updated the porting guide for the usage of received arguments
in BL2 and BL32 setup functions in case of Arm platform.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ia83a5607fed999819d25e49322b3bfb5db9425c0
Updated the document for BL1 and BL2 boot flow to capture
below changes made in FCONF
1. Loading of fw_config and tb_fw_config images by BL1.
2. Population of fw_config and tb_fw_config by BL2.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ifea5c61d520ff1de834c279ce1759b53448303ba
* changes:
doc: Update memory layout for firmware configuration area
plat/arm: Increase size of firmware configuration area
plat/arm: Load and populate fw_config and tb_fw_config
fconf: Handle error from fconf_load_config
plat/arm: Update the fw_config load call and populate it's information
fconf: Allow fconf to load additional firmware configuration
fconf: Clean confused naming between TB_FW and FW_CONFIG
tbbr/dualroot: Add fw_config image in chain of trust
cert_tool: Update cert_tool for fw_config image support
fiptool: Add fw_config in FIP
plat/arm: Rentroduce tb_fw_config device tree
Neoverse N1 erratum 1800710 is a Cat B erratum, present in older
revisions of the Neoverse N1 processor core. The workaround is to
set a bit in the ECTLR_EL1 system register, which disables allocation
of splintered pages in the L2 TLB.
This errata is explained in this SDEN:
https://static.docs.arm.com/sden885747/f/Arm_Neoverse_N1_MP050_Software_Developer_Errata_Notice_v21.pdf
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ie5b15c8bc3235e474a06a57c3ec70684361857a6
Cortex A77 erratum 1800714 is a Cat B erratum, present in older
revisions of the Cortex A77 processor core. The workaround is to
set a bit in the ECTLR_EL1 system register, which disables allocation
of splintered pages in the L2 TLB.
Since this is the first errata workaround implemented for Cortex A77,
this patch also adds the required cortex_a77_reset_func in the file
lib/cpus/aarch64/cortex_a77.S.
This errata is explained in this SDEN:
https://static.docs.arm.com/101992/0010/Arm_Cortex_A77_MP074_Software_Developer_Errata_Notice_v10.pdf
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I844de34ee1bd0268f80794e2d9542de2f30fd3ad
Captured the increase in firmware configuration area from
4KB to 8kB in memory layout document. Updated the documentation
to provide details about fw_config separately.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ifbec443ced479301be65827b49ff4fe447e9109f
All projects under the TrustedFirmware.org project now use the same
security incident process, therefore update the disclosure/vulnerability
reporting information in the TF-A documentation.
------------------------------------------------------------------------
/!\ IMPORTANT /!\
Please note that the email address to send these reports to has changed.
Please do *not* use trusted-firmware-security@arm.com anymore.
Similarly, the PGP key provided to encrypt emails to the security email
alias has changed as well. Please do *not* use the former one provided
in the TF-A source tree. It is recommended to remove it from your
keyring to avoid any mistake. Please use the new key provided on
TrustedFirmware.org from now on.
------------------------------------------------------------------------
Change-Id: I14eb61017ab99182f1c45d1e156b96d5764934c1
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Added a binding document for COT descriptors which is going
to be used in order to create COT desciptors at run-time.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ic54519b0e16d145cd1609274a00b137a9194e8dd
Cortex A76 erratum 1800710 is a Cat B erratum, present in older
revisions of the Cortex A76 processor core. The workaround is to
set a bit in the ECTLR_EL1 system register, which disables allocation
of splintered pages in the L2 TLB.
This errata is explained in this SDEN:
https://static.docs.arm.com/sden885749/g/Arm_Cortex_A76_MP052_Software_Developer_Errata_Notice_v20.pdf
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ifc34f2e9e053dcee6a108cfb7df7ff7f497c9493
Cortex A76 erratum 1791580 is a Cat B erratum present in earlier
revisions of the Cortex A76. The workaround is to set a bit in the
implementation defined CPUACTLR2 register, which forces atomic store
operations to write-back memory to be performed in the L1 data cache.
This errata is explained in this SDEN:
https://static.docs.arm.com/sden885749/g/Arm_Cortex_A76_MP052_Software_Developer_Errata_Notice_v20.pdf
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Iefd58159b3f2e2286138993317b98e57dc361925
Add llc_sram_enable() and llc_sram_disable() APIs to Marvell
cache_lls driver.
Add LLC_SRAM definition to Marvell common makefile - disabled
by the default.
Add description of LLC_SRAM flag to the build documentation.
Change-Id: Ib348e09752ce1206d29268ef96c9018b781db182
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
* changes:
ddr: a80x0: add DDR 32-bit ECC mode support
ble: ap807: improve PLL configuration sequence
ble: ap807: clean-up PLL configuration sequence
ddr: a80x0: add DDR 32-bit mode support
plat: marvell: mci: perform mci link tuning for all mci interfaces
plat: marvell: mci: use more meaningful name for mci link tuning
plat: marvell: a8k: remove wrong or unnecessary comments
plat: marvell: ap807: enable snoop filter for ap807
plat: marvell: ap807: update configuration space of each CP
plat: marvell: ap807: use correct address for MCIx4 register
plat: marvell: add support for PLL 2.2GHz mode
plat: marvell: armada: make a8k_common.mk and mss_common.mk more generic
marvell: armada: add extra level in marvell platform hierarchy