Since commit ac71344e9e we have the UART base address in the generic
console_t structure. For most platforms the platform-specific struct
console is gone, so we *must* use the embedded base address, since there
is no storage behind the generic console_t anymore.
Replace the usage of CONSOLE_T_DRVDATA with CONSOLE_T_BASE to fix this.
Change-Id: I6d2ab0bc2c845c71f98b9dd64d89eef3252f4591
Reported-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Commit ac71344e9e moved the base address
for the MMIO aperture of the console inside the console_t struct. As
a result, the driver should now save the MMIO base address to console_t
at offset marked by the CONSOLE_T_BASE macro.
This patch updates the SPE console driver to use the CONSOLE_T_BASE macro
to save/access the MMIO base address.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I42afc2608372687832932269108ed642f218fd40
This patch implements loading of Secure Partition packages using
existing framework of loading other bl images.
The current framework uses a statically defined array to store all the
possible image types and at run time generates a link list and traverse
through it to load different images.
To load SPs, a new array of fixed size is introduced which will be
dynamically populated based on number of SPs available in the system
and it will be appended to the loadable images list.
Change-Id: I8309f63595f2a71b28a73b922d20ccba9c4f6ae4
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Added SPMD_SPM_AT_SEL2 build command line parameter.
Set to 1 to run SPM at S-EL2.
Set to 0 to run SPM at S-EL1 (pre-v8.4 or S-EL2 is disabled).
Removed runtime EL from SPM core manifest.
Change-Id: Icb4f5ea4c800f266880db1d410d63fe27a1171c0
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Renamed the structure according to a SPMD refactoring
introduced in <c585d07aa> since this structure is used
to service both EL1 and EL2 as opposed to serving only EL1.
Change-Id: I23b7c089e53f617157a4b4e6443acce50d85c3b5
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Add load address and UUID in fw config dts for Cactus and Ivy which are
example SP's in tf-test repository.
For prototype purpose these information is added manually but later on
it will be updated at compile time from SP layout file and SP manifests
provided by platform.
Change-Id: I41f485e0245d882c7b514bad41fae34036597ce4
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Use the firmware configuration framework to retrieve information about
Secure Partitions to facilitate loading them into memory.
To load a SP image we need UUID look-up into FIP and the load address
where it needs to be loaded in memory.
This patch introduces a SP populator function which gets UUID and load
address from firmware config device tree and updates its C data
structure.
Change-Id: I17faec41803df9a76712dcc8b67cadb1c9daf8cd
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
On Hikey960 if outputs GPIO176 low level, it can tell PMIC to power off
the whole board. To avoid resetting the board and stay off, it also
requires the SW2201's three switches 1/2/3 need to be all set to 0.
Since current code doesn't contain complete GPIO modules and misses to
support GPIO176. This patch adds all known GPIO modules and initialize
GPIO in BL31, and adds system power off callback to use GPIO176 for PMIC
power off operation.
Change-Id: Ia88859b8b7c87c061420ef75f0de3e2768667bb0
Signed-off-by: Leo Yan <leo.yan@linaro.org>
* changes:
board/rddaniel: intialize tzc400 controllers
plat/arm/tzc: add support to configure multiple tzc400
plat/arm: allow boards to specify second DRAM Base address
plat/arm: allow boards to define PLAT_ARM_TZC_FILTERS
MISRA C-2012 Rule 20.7:
Macro parameter expands into an expression without being wrapped by parentheses.
MISRA C-2012 Rule 12.1:
Missing explicit parentheses on sub-expression.
MISRA C-2012 Rule 18.4:
Essential type of the left hand operand is not the same as that of the right
operand.
Include does not provide any needed symbols.
Change-Id: Ie1c6451cfbc8f519146c28b2cf15c50b1f36adc8
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Modify RSU driver error code for backward-compatibility with
Linux RSU driver
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ib9e38d4017efe35d3aceeee27dce451fbd429fb5
The revision register address will be changed in the next SoC.
The LSI revision is needed in order to know where the revision
register is located, but you need to read out the revision
register for that. This is impossible.
We need to know the revision register address by other means.
Use BL_CODE_BASE, where the base address of the TF image that is
currently running. If it is bigger than 0x80000000 (i.e. the DRAM
base is 0x80000000), we assume it is a legacy SoC.
Change-Id: I9d7f4325fe2085a8a1ab5310025e5948da611256
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* changes:
marvell: Consolidate console register calls
uniphier: Use generic console_t data structure
spe: Use generic console_t data structure
LS 16550: Use generic console_t data structure
stm32: Use generic console_t data structure
rcar: Use generic console_t data structure
a3700: Use generic console_t data structure
16550: Use generic console_t data structure
imx: Use generic console_t data structure
This patch fixes incorrect setting for DEVICE1_SIZE
for FVP platforms with more than 8 PEs.
The current value of 0x200000 supports only 8 PEs
and causes exception for FVP platforms with the greater
number of PEs, e.g. FVP_Base_Cortex_A65AEx8 with 16 PEs
in one cluster.
Change-Id: Ie6391509fe6eeafb8ba779303636cd762e7d21b2
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Board Support for the stm32mp1 platform is contained in the device tree,
so if we remove hardcoding of board name from the Makefile, we can build
the intermediary objects once and generate one new tf-a-*.stm32 binary
for every device tree specified. All in one go.
With implicit rules implemented, we only need to change the top level
target to support multi-image builds on the stm32mp1.
Change-Id: I4cae7d32a4c03a3c29c559dc5332e002223902c1
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Board Support for the stm32mp1 platform is contained in the device tree,
so if we remove hardcoding of board name from the Makefile, we can build
the intermediary objects once and generate one new tf-a-*.stm32 binary
for every device tree specified. All in one go.
Prepare for this by employing implicit rules.
Change-Id: I5a022a89eb12696cd8cee7bf28ac6be54849901f
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Doing this allows us in the next commit to use implicit rules (%-patterns)
to cover all the images we generate during a stm32mp1 build.
Change-Id: Ibde59d10ccce42566f82820117d7fd0d77345e6c
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
The linker script has no board-specific information that necessitates it
having a name derived from the board name. Give it a fixed name, so we
can later reuse the same linker script for multiple boards.
Change-Id: Ie6650f00389f4ab8577ae82a36c620af9c64101e
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Currently, building TF-A for STM32MP1 triggers a full rebuild,
avoid this by removing the .PHONY: specification for the final image and
replace it by specifying PHONYness for the targets that don't actually
produce file output.
This will come in handy in follow-up commits, when implicit rules are
introduced, as implicit rule search is skipped for .PHONY targets.
Change-Id: Ib9966479032b081a54123b99f889760e85639f19
Fixes: f74cbc93a ("stm32mp1: Link BL2, BL32 and DTB in one binary")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Now that different UARTs share the same console_t struct, we can
simplify the console selection for the Marvell platforms:
We share the same console_t pointers, just change the name of the
console register functions, depending on the selected platform.
Change-Id: I6fe3e49fd7f208a9b3372c5deef43236a12867bc
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: I7a23327394d142af4b293ea7ccd90b843c54587c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: I07a07677153d3671ced776671e4f107824d3df16
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: Ia9d996bb45ff3a7f1b240f12fd75805b48a048e9
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: I75dbfafb67849833b3f7b5047e237651e3f553cd
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: I9f8b55414ab7965e431e3e86d182eabd511f32a4
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: Ifd6aff1064ba1c3c029cdd8a83f715f7a9976db5
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: Iea6ca26ff4903c33f0fad27fec96fdbabd4e0a91
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: I836e26ff1771abf21fd460d0ee40e90a452e9b43
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: I89c3ab2ed85ab941d8b38ced48474feb4aaa8b7e
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: I5c2fe3b6a667acf80c808cfec4a64059a2c9c25f
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Since now the generic console_t structure holds the UART base address as
well, let's use that generic location and drop the UART driver specific
data structure at all.
Change-Id: I058f793e4024fa7291e432f5be374a77faf16f36
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
This patch comes as fixes for 'intel: Fix Coverity Scan Defects' patch.
Revert changing argument type from uint32_t to uint64_t to fix
incompatible cast issue. Fix said bug by using intermediate uint32_t
array as a more appropriate solution.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I344cdabd432cf0a0389b225c934b35d12f4c631d
This initializes the EMAC PHY in both Stratix 10 and Agilex,
without this, EMAC PHY wouldn't work correctly.
Change-Id: I7e6b9e88fd9ef472884fcf648e6001fcb7549ae6
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
This patch introduces a build flag which allows the xlat tables
to be mapped in a read-only region within BL31 memory. It makes it
much harder for someone who has acquired the ability to write to
arbitrary secure memory addresses to gain control of the
translation tables.
The memory attributes of the descriptors describing the tables
themselves are changed to read-only secure data. This change
happens at the end of BL31 runtime setup. Until this point, the
tables have read-write permissions. This gives a window of
opportunity for changes to be made to the tables with the MMU on
(e.g. reclaiming init code). No changes can be made to the tables
with the MMU turned on from this point onwards. This change is also
enabled for sp_min and tspd.
To make all this possible, the base table was moved to .rodata. The
penalty we pay is that now .rodata must be aligned to the size of
the base table (512B alignment). Still, this is better than putting
the base table with the higher level tables in the xlat_table
section, as that would cost us a full 4KB page.
Changing the tables from read-write to read-only cannot be done with
the MMU on, as the break-before-make sequence would invalidate the
descriptor which resolves the level 3 page table where that very
descriptor is located. This would make the translation required for
writing the changes impossible, generating an MMU fault.
The caches are also flushed.
Signed-off-by: Petre-Ionut Tudor <petre-ionut.tudor@arm.com>
Change-Id: Ibe5de307e6dc94c67d6186139ac3973516430466
The dualroot chain of trust involves 2 root-of-trust public keys:
- The classic ROTPK.
- The platform ROTPK (a.k.a. PROTPK).
Use the cookie argument as a key ID for plat_get_rotpk_info() to return the
appropriate one. This only applies if we are using the dualroot CoT ; if using
the TBBR one, the behaviour is unchanged.
Change-Id: I400707a87ec01afd5922b68db31d652d787f79bd
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
The cookie will be leveraged in the next commit.
Change-Id: Ie8bad275d856d84c27466461cf815529dd860446
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
- Use the development PROTPK if using the dualroot CoT.
Note that unlike the ROTPK, the PROTPK key hash file is not generated
from the key file, instead it has to be provided. This might be
enhanced in the future.
- Define a CoT build flag for the platform code to provide different
implementations where needed.
Change-Id: Iaaf25183b94e77a99a5d8d875831d90c102a97ea
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
When using the new dualroot chain of trust, a new root of trust key is
needed to authenticate the images belonging to the platform owner.
Provide a development one to deploy this on Arm platforms.
Change-Id: I481145e09aa564822d474cb47d38ec211dd24efd
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
This patch adds support for a new SMC that can be used to control the
watchdog. This allows for a cleaner separation of responsibilities where
all watchdog operations have to go through Trusted Firmware and we could
no longer have kernel and firmware poking concurrently at the same
register block.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Change-Id: I4844a3559d5c956a53a74a61dd5bc2956f0cce7b
There are chances a denial-of-service attack, if an attacker
removes the SPE firmware from the system. The console driver
would end up waiting for the firmware to respond indefinitely.
The console driver must detect such scenarios and uninit the
interface as a result.
This patch adds a timeout to the interaction with the SPE
firmware and uninits the interface if it times out.
Change-Id: I06f27a858baed25711d41105b4110865f1a01727
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Tegra210 SoCs need the sc7entry-fw to enter System Suspend mode,
but there might be certain boards that do not have this firmware
blob. To stop the NS world from issuing System suspend entry
commands on such devices, we ned to disable System Suspend from
the PSCI "features".
This patch removes the System suspend handler from the Tegra PSCI
ops, so that the framework will disable support for "System Suspend"
from the PSCI "features".
Original change by: kalyani chidambaram <kalyanic@nvidia.com>
Change-Id: Ie029f82f55990a8b3a6debb73e95e0e218bfd1f5
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Code complexity is a good indication of maintainability versus
testability of a piece of software.
ISO26262 introduces the following thresholds:
complexity < 10 is accepted
10 <= complexity < 20 has to be justified
complexity >= 20 cannot be accepted
Rationale is that number of test cases to fully test a piece of
software can (depending on the coverage metrics) grow exponentially
with the number of branches in the software.
This patch removes redundant conditionals from 'ipc_send_req_atomic'
handler to reduce the McCabe Cyclomatic Complexity for this function
Change-Id: I20fef79a771301e1c824aea72a45ff83f97591d5
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch provides platforms an opportunity to relocate the
BL32 image, during cold boot. Tegra186 platforms, for example,
relocate BL32 images to TZDRAM memory as the previous bootloader
relies on BL31 to do so.
Change-Id: Ibb864901e43aca5bf55d8c79e918b598c12e8a28
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Code complexity is a good indication of maintainability versus
testability of a piece of software.
ISO26262 introduces the following thresholds:
complexity < 10 is accepted
10 <= complexity < 20 has to be justified
complexity >= 20 cannot be accepted
Rationale is that number of test cases to fully test a piece of
software can (depending on the coverage metrics) grow exponentially
with the number of branches in the software.
This patch removes redundant conditionals from 'bl31_early_platform_setup'
handler to reduce the McCabe Cyclomatic Complexity for this function.
Change-Id: Ifb628e33269b388f9323639cd97db761a7e049c4
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch sets the "secure" bit to mark the PMC hardware block
as accessible only from the secure world. This setting must be
programmed during cold boot and System Resume.
The sc7entry-fw, running on the COP, needs access to the PMC block
to enter System Suspend state, so "unlock" the PMC block before
passing control to the COP.
Change-Id: I00e39a49ae6b9f8c8eafe0cf7ff63fe6a67fdccf
Signed-off-by: kalyani chidambaram <kalyanic@nvidia.com>
This patch modifies the delay timer driver to switch to the ARM
secure physical timer instead of using Tegra's on-chip uS timer.
The secure timer is not accessible to the NS world and so eliminates
an important attack vector, where the Tegra timer source gets switched
off from the NS world leading to a DoS attack for the trusted world.
This timer is shared with the S-EL1 layer for now, but later patches
will mark it as exclusive to the EL3 exception mode.
Change-Id: I2c00f8cb4c48b25578971c626c314603906ad7cc
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch moves the MHZ_TICKS_PER_SEC macro to utils_def.h
for other platforms to use.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I6c4dc733f548d73cfdb3515ec9ad89a9efaf4407
This patch locks most of the stream id security config registers as
per HW guidance.
This patch keeps the stream id configs unlocked for the following
clients, to allow some platforms to still function, until they make
the transition to the latest guidance.
- ISPRA
- ISPFALR
- ISPFALW
- ISPWA
- ISPWA1
- ISPWB
- XUSB_DEVR
- XUSB_DEVW
- XUSB_HOSTR
- XUSB_HOSTW
- VIW
- VIFALR
- VIFALW
Change-Id: I66192b228a0a237035938f498babc0325764d5df
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
The PMC hardware block resume handler was called for Tegra210
platforms, only if the sc7entry-fw was present on the device.
This would cause problems for devices that do not support this
firmware.
This patch fixes this logic and resumes the PMC block even if
the sc7entry-fw is not present on the device.
Change-Id: I6f0eb7878126f624ea98392f583ed45a231d27db
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>
This patch adds the macro to enable legacy FIQ handling to the common
Tegra makefile. The default value of this macro is '0'. Platforms that
need this support should enable it from their makefiles.
This patch also helps fix violation of Rule 20.9.
Rule 20.9 "All identifiers used in the controlling expression of #if
of #elif preprocessing directives shall be #define'd before
evaluation"
Change-Id: I4f0c9917c044b5b1967fb5e79542cd3bf6e91f18
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Fix mailbox driver incompatible cast bug and control flow issue that
was flagged by Coverity Scan.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I3f34e98d24e40139d31cf7d5b9b973cd2d981065
A TZC400 controller is placed inline on DRAM channels and regulates
the secure and non-secure accesses to both secure and non-secure
regions of the DRAM memory. Configure each of the TZC controllers
accordingly.
Change-Id: I75f6d13591a7fe9e50ce15c793e35a8018041815
Signed-off-by: Suyash Pathak <suyash.pathak@arm.com>
For platforms that have two or more TZC400 controllers instantiated,
allow the TZC400 driver to be usable with all those instances.
This is achieved by allowing 'arm_tzc400_setup' function to accept
the base address of the TZC400 controller.
Change-Id: I4add470e6ddb58432cd066145e644112400ab924
Signed-off-by: Suyash Pathak <suyash.pathak@arm.com>
The base address for second DRAM varies across different platforms.
So allow platforms to define second DRAM by moving Juno/SGM-775 specific
definition of second DRAM base address to Juno/SGM-775 board definition
respectively, SGI/RD specific definition of DRAM 2 base address to SGI
board definition.
Change-Id: I0ecd3a2bd600b6c7019c7f06f8c452952bd07cae
Signed-off-by: Suyash Pathak <suyash.pathak@arm.com>
A TZC400 can have upto 4 filters and the number of filters instantiated
within a TZC400 is platform dependent. So allow platforms to define the
value of PLAT_ARM_TZC_FILTERS by moving the existing Juno specific
definition of PLAT_ARM_TZC_FILTERS to Juno board definitions.
Change-Id: I67a63d7336595bbfdce3163f9a9473e15e266f40
Signed-off-by: Suyash Pathak <suyash.pathak@arm.com>
Use CREATE_SEQ helper macro to create sequence of valid chip counts
instead of manually creating the sequence. This allows a scalable
approach to increase the valid chip count sequence in the future.
Change-Id: I5ca7a00460325c156b9e9e52b2bf656a2e43f82d
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
When TF-A is built with RESET_TO_BL31=1 option, BL31 is the
first image to be run and should have all the memory allocated
to it except for the memory reserved for Shared RAM at the start
of Trusted SRAM.
This patch fixes FVP BL31 load address and its image size for
RESET_TO_BL31=1 option. BL31 startup address should be set to
0x400_1000 and its maximum image size to the size of Trusted SRAM
minus the first 4KB of shared memory.
Loading BL31 at 0x0402_0000 as it is currently stated in
'\docs\plat\arm\fvp\index.rst' causes EL3 exception when the
image size gets increased (i.e. building with LOG_LEVEL=50)
but doesn't exceed 0x3B000 not causing build error.
Change-Id: Ie450baaf247f1577112f8d143b24e76c39d33e91
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Adding support for 32MHz UART clock and selecting it as the
default UART clock
Change-Id: I9541eaff70424e85a3b5ee4820ca0e7efb040d2c
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Running checkpatch.pl on the codebase and making required changes
Change-Id: I7d3f8764cef632ab2a6d3c355c68f590440b85b8
Signed-off-by: Avinash Mehta <avinash.mehta@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Note: This patch implements in-band messaging protocol only.
ARM has launched a next version of MHU i.e. MHUv2 with its latest
subsystems. The main change is that the MHUv2 is now a distributed IP
with different peripheral views (registers) for the sender and receiver.
Another main difference is that MHUv1 duplex channels are now split into
simplex/half duplex in MHUv2. MHUv2 has a configurable number of
communication channels. There is a capability register (MSG_NO_CAP) to
find out how many channels are available in a system.
The register offsets have also changed for STAT, SET & CLEAR registers
from 0x0, 0x8 & 0x10 in MHUv1 to 0x0, 0xC & 0x8 in MHUv2 respectively.
0x0 0x4 0x8 0xC 0x1F
------------------------....-----
| STAT | | | SET | | |
------------------------....-----
Transmit Channel
0x0 0x4 0x8 0xC 0x1F
------------------------....-----
| STAT | | CLR | | | |
------------------------....-----
Receive Channel
The MHU controller can request the receiver to wake-up and once the
request is removed, the receiver may go back to sleep, but the MHU
itself does not actively put a receiver to sleep.
So, in order to wake-up the receiver when the sender wants to send data,
the sender has to set ACCESS_REQUEST register first in order to wake-up
receiver, state of which can be detected using ACCESS_READY register.
ACCESS_REQUEST has an offset of 0xF88 & ACCESS_READY has an offset
of 0xF8C and are accessible only on any sender channel.
This patch adds necessary changes in a new file required to support the
latest MHUv2 controller. This patch also needs an update in DT binding
for ARM MHUv2 as we need a second register base (tx base) which would
be used as the send channel base.
Change-Id: I1455e08b3d88671a191c558790c503eabe07a8e6
Signed-off-by: Tushar Khandelwal <tushar.khandelwal@arm.com>
In extreme cases, the number of secure regions is one more than
non-secure regions. So array "s_base" and "s_top"s size
in struct param_ddr_usage need to be adjust to "DDR_REGION_NR_MAX + 1".
Signed-off-by: XiaoDong Huang <derrick.huang@rock-chips.com>
Change-Id: Ifc09da2c8f8afa1aebcc78f8fbc21ac95abdece2
Use space after #define consistently, drop useless parenthesis,
no functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I72846d8672cab09b128e3118f4b7042a5a9c0df5
This patch changes the destination address of BL31 and BL32 From
fixed address for getting from the each certificates.
Signed-off-by: Toshiyuki Ogasahara <toshiyuki.ogasahara.bo@hitachi.com>
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> # upstream rework
Change-Id: Ide11776feff25e6fdd55ab28503a15b658b2e0d5
* changes:
uniphier: make I/O register region configurable
uniphier: make PSCI related base address configurable
uniphier: make counter control base address configurable
uniphier: make UART base address configurable
uniphier: make pinmon base address configurable
uniphier: make NAND controller base address configurable
uniphier: make eMMC controller base address configurable
The offset there is the virtual address space on the bus side (1-9GB for 8GB RAM),
and that emi_mpu_set_region_protection will translate to the physical memory space (0-8GB).
8GB is 33-bit (the memory bus width is 33-bit on this platform),
so 0x23FFFFFFFUL-EMI_PHY_OFFSET = 0x1_FFFF_FFFF.
Change-Id: I7be4759ed7546f7e15a5868b6f08988928c34075
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Adding support for generating a semi-random number required for
enabling building TF-A with stack protector support.
TF-A for corstone-700 may now be built using ENABLE_STACK_PROTECTOR=all
Change-Id: I03e1be1a8d4e4a822cf286f3b9ad4da4337ca765
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
* changes:
uniphier: extend boot device detection for future SoCs
uniphier: change block_addressing flag to bool
uniphier: change the return value type of .is_usb_boot() to bool
If an SCP firmware is present and able to communicate via SCPI, then use
that to implement CPU and system power state transitions, including CPU
hotplug and system suspend. Otherwise, fall back to the existing CPU
power control implementation.
The last 16 KiB of SRAM A2 are reserved for the SCP firmware, and the
SCPI shared memory is at the very end of this region (and therefore the
end of SRAM A2). BL31 continues to start at the beginning of SRAM A2
(not counting the ARISC exception vector area) and fills up to the
beginning of the SCP firmware.
Because the SCP firmware is not loaded adjacent to the ARISC exception
vector area, the jump instructions used for exception handling cannot be
included in the SCP firmware image, and must be initialized here before
turning on the SCP.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I37b9b9636f94d4125230423726f3ac5e9cdb551c
The function names follow the naming convention used by the existing
ARM SCPI client.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I543bae7d46e206eb405dbedfcf7aeba88a12ca48
The SCP firmware is allocated the last 16KiB of SRAM A2. This includes
the SCPI shared memory area, which must be mapped as MT_DEVICE to
prevent problems with cache coherency between the AP CPUs and the SCP.
For simplicity, map the whole SCP region as MT_DEVICE.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Ie39eb5ff281b8898a3c1d9748dc08755f528e2f8
Andre Przywara
Varun Wadekar
Manish Pandey
Max Shvetsov
Olivier Deprez
Leo Yan
Sandrine Bailleux
Louis Mayencourt
Abdul Halim, Muhammad Hadi Asyrafi
Masahiro Yamada
Mark Dykes
Alexei Fedorov
Soby Mathew
Ahmad Fatoum
Tien Hock, Loh
Petre-Ionut Tudor
Julius Werner
joanna.farley
kalyani chidambaram
Pritesh Raithatha
Suyash Pathak
Vijayenthiran Subramaniam
Jimmy Brisson
Vishnu Banavath
Avinash Mehta
Khandelwal
XiaoDong Huang
Marek Vasut
Yoshifumi Hosoya
Toshiyuki Ogasahara
Xi Chen
Morten Borup Petersen
Samuel Holland