Refine the function plat_add_sp_images_load_info() by saving the
previous node and only setting its next link when the current node is
valid. This can reduce the check for the next node and simply the
total logic.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I4061428bf49ef0c3816ac22aaeb2e50315531f88
The traverse flow in function plat_add_sp_images_load_info() will find
the last node in the main load info list, with its
next_load_info==NULL. However this node is still useful and should not
be overridden with SP node info.
The bug will cause below error on RDN2 for spmd enabled:
ERROR: Invalid NT_FW_CONFIG DTB passed
Fix the bug by only setting the next_load_info of the last node in the
original main node list.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: Icaee5da1f2d53b29fdd6085a8cc507446186fd57
As per the new multi-console framework, updating the JTAG DCC support.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I77994ce387caf0d695986df3d01d414a920978d0
As per the new multi-console framework, updating the JTAG DCC support.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I62cfbb57ae7e454fbc91d1c54aafa6e99f9a35c8
* changes:
plat/sgi: allow usage of secure partions on rdn2 platform
board/rdv1mc: initialize tzc400 controllers
plat/sgi: allow access to TZC controller on all chips
plat/sgi: define memory regions for multi-chip platforms
plat/sgi: allow access to nor2 flash and system registers from s-el0
plat/sgi: define default list of memory regions for dmc620 tzc
plat/sgi: improve macros defining cper buffer memory region
plat/sgi: refactor DMC-620 error handling SMC function id
plat/sgi: refactor SDEI specific macros
Add the secure partition mmap table and the secure partition boot
information to support secure partitions on RD-N2 platform. In addition
to this, add the required memory region mapping for accessing the
SoC peripherals from the secure partition.
Signed-off-by: Omkar Anand Kulkarni <omkar.kulkarni@arm.com>
Change-Id: I2c75760d6c8c3da3ff4885599be420e924aeaf3c
A TZC400 controller is placed inline on DRAM channels and regulates
the secure and non-secure accesses to both secure and non-secure
regions of the DRAM memory. Configure each of the TZC controllers
across the Chips.
For use by secure software, configure the first chip's trustzone
controller to protect the upper 16MB of the memory of the first DRAM
block for secure accesses only. The other regions are configured for
non-secure read write access. For all the remote chips, all the DRAM
regions are allowed for non-secure read and write access.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I809f27eccadfc23ea0ef64e2fd87f95eb8f195c1
On a multi-chip platform, the boot CPU on the first chip programs the
TZC controllers on all the remote chips. Define a memory region map for
the TZC controllers for all the remote chips and include it in the BL2
memory map table.
In addition to this, for SPM_MM enabled multi-chip platforms, increase
the number of mmap entries and xlat table counts for EL3 execution
context as well because the shared RAM regions and GIC address space of
remote chips are accessed.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I6f0b5fd22f9f28046451e382eef7f1f9258d88f7
For multi-chip platforms, add a macro to define the memory regions on
chip numbers >1 and its associated access permissions. These memory
regions are marked with non-secure access.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: If3d6180fd8ea61f45147c39d3140d694abf06617
Allow the access of system registers and nor2 flash memory region
from s-el0. This allows the secure parititions residing at s-el0
to access these memory regions.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I3887a86770de806323fbde0d20fdc96eec6e0c3c
Define a default DMC-620 TZC memory region configuration and use it to
specify the TZC memory regions on sgi575, rdn1edge and rde1edge
platforms. The default DMC-620 TZC memory regions are defined
considering the support for secure paritition as well.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: Iedee3e57d0d3de5b65321444da51ec990d3702db
Remove the 'ARM_' prefix from the macros defining the CPER buffer memory
and replace it with 'CSS_SGI_' prefix. These macros are applicable only
for platforms supported within plat/sgi. In addition to this, ensure
that these macros are defined only if the RAS_EXTENSION build option is
enabled.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I44df42cded18d9d3a4cb13e5c990e9ab3194daee
The macros defining the SMC function ids for DMC-620 error handling are
listed in the sgi_base_platform_def.h header file. But these macros are
not applicable for all platforms supported under plat/sgi. So move these
macro definitions to sgi_ras.c file in which these are consumed. While
at it, remove the AArch32 and error injection function ids as these are
unused.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I249b54bf4c1b1694188a1e3b297345b942f16bc9
The macros specific to SDEI defined in the sgi_base_platform_def.h are
not applicable for all the platforms supported by plat/sgi. So refactor
the SDEI specific macros into a new header file and include this file on
only on platforms it is applicable on.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I0cb7125334f02a21cae1837cdfd765c16ab50bf5
Broadcom I2C controller driver. Follwoing API's are supported:-
- i2c_init() Intialize ethe I2C controller
- i2c_probe()
- i2c_set_bus_speed() Set the I2C bus speed
- i2c_get_bus_speed() Get the current bus speed
- i2c_recv_byte() Receive one byte of data.
- i2c_send_byte() Send one byteof data
- i2c_read_byte() Read single byte of data
- i2c_read() Read multiple bytes of data
- i2c_write_byte Write single byte of data
- i2c_write() Write multiple bytes of data
This driver is verified by reading the DDR SPD data.
Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com>
Change-Id: I2d7fe53950e8b12fab19d0293020523ff8b74e13
When the BL31 for the Allwinner H616 runs in DRAM, we need to make sure
we tell the non-secure world about the memory region it uses.
Add a reserved-memory node to the DT, which covers the area that BL31
could occupy. The "no-map" property will prevent OSes from mapping
the area, so there would be no speculative accesses.
Change-Id: I808f3e1a8089da53bbe4fc6435a808e9159831e1
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The new Allwinner H616 SoC lacks the management controller and the secure
SRAM A2, so we need to tweak the memory map quite substantially:
We run BL31 in DRAM. Since the DRAM starts at 1GB, we cannot use our
compressed virtual address space (max 256MB) anymore, so we revert to
the full 32bit VA space and use a flat mapping throughout all of it.
The missing controller also means we need to always use the native PSCI
ops, using the CPUIDLE hardware, as SCPI and suspend depend on the ARISC.
Change-Id: I77169b452cb7f5dc2ef734f3fc6e5d931749141d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
In preparation for changing the memory map, express the locations of the
various code and data pieces more dynamically, allowing SoCs to override
the memmap later.
Also prepare for the SCP region to become optional.
No functional change.
Change-Id: I7ac01e309be2f23bde2ac2050d8d5b5e3d6efea2
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The code to power the current core off when SCPI is not available is now
different for the two supported SoC families.
To make adding new platforms easier, move sunxi_cpu_power_off_self()
into the SoC directory, so we don't need to carry definitions for both
methods for all SoCs.
On the H6 we just need to trigger the CPUIDLE hardware, so can get rid
of all the code to program the ARISC, which is now only needed for the
A64 version.
Change-Id: Id2a1ac7dcb375e2fd021b441575ce86b4d7edf2c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
For the existing SoCs we support, we use SEPARATE_NOBITS_REGION, to move
some parts of the data into separate memory regions (to save on the SRAM
A2 we are loaded into).
For the upcoming H616 platform this is of no concern (we run in DRAM),
so make this flag a platform choice instead.
Change-Id: Ic01d49578c6274660f8f112bd23680d3eca3be7a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The upcoming refactoring to support the new H616 SoCs will push the A64
build over the edge, by using more than the 48KB of SRAM available.
To reduce the code size, set some libfdt options that aim to reduce
sanity checks (for saving code space):
- ASSUME_LATEST: only allow v17 DTBs (as created by dtc)
- ASSUME_NO_ROLLBACK: don't prepare for failed DT additions
- ASSUME_LIBFDT_ORDER: assume sane ordering, as done by dtc
Change-Id: I12c93ec09e7587c5ae71e54947f817c32ce5fd6d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* changes:
nxp lx2160a-aqds: new plat based on soc lx2160a
NXP lx2160a-rdb: new plat based on SoC lx2160a
nxp lx2162aqds: new plat based on soc lx2160a
nxp: errata handling at soc level for lx2160a
nxp: make file for loading additional ddr image
nxp: adding support of soc lx2160a
nxp: deflt hdr files for soc & their platforms
nxp: platform files for bl2 and bl31 setup
nxp: warm reset support to retain ddr content
nxp: nv storage api on platforms
nxp: supports two mode of trusted board boot
nxp: fip-handler for additional fip_fuse.bin
nxp: fip-handler for additional ddr-fip.bin
nxp: image loader for loading fip image
nxp: svp & sip smc handling
nxp: psci platform functions used by lib/psci
nxp: helper function used by plat & common code
nxp: add data handler used by bl31
nxp: adding the driver.mk file
nxp-tool: for creating pbl file from bl2
nxp: adding the smmu driver
nxp: cot using nxp internal and mbedtls
nxp:driver for crypto h/w accelerator caam
nxp:add driver support for sd and emmc
nxp:add qspi driver
nxp: add flexspi driver support
nxp: adding gic apis for nxp soc
nxp: gpio driver support
nxp: added csu driver
nxp: driver pmu for nxp soc
nxp: ddr driver enablement for nxp layerscape soc
nxp: i2c driver support.
NXP: Driver for NXP Security Monitor
NXP: SFP driver support for NXP SoC
NXP: Interconnect API based on ARM CCN-CCI driver
NXP: TZC API to configure ddr region
NXP: Timer API added to enable ARM generic timer
nxp: add dcfg driver
nxp:add console driver for nxp platform
tools: add mechanism to allow platform specific image UUID
tbbr-cot: conditional definition for the macro
tbbr-cot: fix the issue of compiling time define
cert_create: updated tool for platform defined certs, keys & extensions
tbbr-tools: enable override TRUSTED_KEY_CERT
SoC erratas are handled as part of this commit.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I06f7594d19cc7fc89fe036a8a255300458cb36dd
- NXP SoC lx2160a needs additional ddr_fip.bin.
- There are three types of ddr image that can be created:
-- ddr_fip.mk for creating fip_ddr.bin image for normal boot.
-- ddr_fip_sb.mk for creating fip_ddr_sec.bin image for NXP CSF based
CoT/secure boot.
-- ddr_fip_tbbr.mk for creating fip_ddr_sec.bin image for MBEDTLS
CoT/secure boot.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I24bff8d489f72da99f64cb79b2114faa9423ce8c
* NXP SoC is 16 A-72 core SoC.
* SoC specific defines are defined in:
- soc.def
- soc.h
* Called for BL2 and BL31 setup, SoC specific setup are implemented in:
- soc.c
* platform specific helper functions implemented at:
- aarch64/lx2160a_helpers.S
* platform specific functions used by 'plat/nxp/commpon/psci',
etc. are implemented at:
- aarch64/lx2160a.S
* platform specific implementation for handling PSCI_SYSTEM_RESET2:
- aarch64/lx2160a_warm_rst.S
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ib40086f9d9079ed9b22967baff518c6df9f408b8
For NXP platforms:
- Setup files for BL2 and BL31
- Other supporting files.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I36a1183a0652701bdede9e02d41eb976accbb017
NXP: Added warm reset handler to handle SMC PSCI_SYSTEM_RESET2
raised from kernel (> 5.4).
As part of first cold boot, DDR training data is stored in NV storage.
As part of this SMC handling, following things are done:
- DDR is put in self-refresh mode to retain the content of DDR.
- Reset cause is saved.
- Reset is triggered.
On next boot to last warm-reset, DDR training is restored from
the NV storage.
Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I8e4fb0824887af49e959c93825e2ab0ba887fc9d
NV storage API(s) for NXP platforms, supported on:
- flexspi-nor
- SecMon - General Purpose Registers at Low-Power section,
retains their content if backed by coined battery.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Id65dee4f28e7d6d2024407030039de33ebe0fa05
NXP SoC supports two TBB mode:
- MBED_TLS based
-- ROTK key hash is placed as part of the BL2 binary at section:
--- .rodata.nxp_rotpk_hash
-- Supporting non-volatile counter via SFP.
-- platform function used by TFA common authentication code.
- NXP CSF based
-- ROTK key deployment vary from MBEDTLS
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ib0f0bf024fd93de906c5d4f609383ae9e02b2fbc
All of the NXP SoC, needs fip_fuse image to be
loaded additionally as part of preparation for Trusted board boot
- fip_fuse.bin contains an image for auto fuse provisioning.
- Auto fuse provisioning is based on the input file with values for:
-- SRK Hash
-- OTPMK
-- misc. refer board manual for more details.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I26d4024fefe352d967ca120191f784f1f47aa9d1
Few of the NXP SoC like LX2160A, needs ddr-phy images to be
loaded additionally before DDR initialization
- fip_ddr.bin is created containing upto 6 ddr images.
- With TRUSTED_BOARD_BOOT = 1, fip_ddr.bin is authenticated
first before loading and starting DDR initialization.
- To successfully compile this image, platform-defined header files
needs to be defined:
-- include/common/tbbr/tbbr_img_def.h uses:
--- plat_tbbr_img_def.h: platform specific new FIP image macros.
-- include/tools/share/firmware_image_package.h uses:
--- plat_def_fip_uuid.h: platform specific new UUID macros.
---- Added UUID for DDR images to create FIP-DDR.
---- Added UUID for FUSE provisioning images to create FIP-fuse.
-- include/tools/share/tbbr_oid.h uses:
--- platform_oid.h: platform specific new OID macros.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Icbcf1673a8c398aae98680b5016f4276b4864b91
function load_img(), is dependent on:
- Recursively calling load_image() defined in common/bl_common.c
- for each image in the fip.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I57ca4b666cd1b0b992b7c0fc2a4260b558c0e2a9
bl31-data file written in assembly helps to manage data at bl31.
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ic3ace03364648cc1174bb05b5b334b9ccdaaa4ed
This works even on SoCs that do not have an ARISC, and it avoids
clobbering whatever ARISC firmware might be running.
Change-Id: I9f2fed597189bb387de79e8e76a7da3375e1ee91
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Adds bl2 with FIP to the build required for mbed Linux booting where
we do:
BootROM -> SPL -> BL2 -> OPTEE -> u-boot
If NEED_BL2 is specified then BL2 will be built and BL31 will have
its address range modified upwards to accommodate. BL31 must be
loaded from a FIP in this case.
If NEED_BL2 is not specified then the current BL31 boot flow is
unaffected and u-boot SPL will load and execute BL31 directly.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I655343b3b689b1fc57cfbedda4d3dc2fbd549a96
This patch enables Trusted Boot on the i.MX8MM with BL2 doing image
verification from a FIP prior to hand-over to BL31.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I3c22783a5c49544d0bace8ef3724784b9b7cc64a
Adds a number of definitions consistent with the established WaRP7
equivalents specifying number of io_handles and block devices.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: If1d7ef1ad3ac3dfc860f949392c7534ce8d206e3
Allows for exporting of FIP related methods cleanly in a private header.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I8523f1370312ed22ff7ca710cd916be52f725e3c
TZC400 is configured to raise an interrupt in case of faulty access.
Call the new added tzc400_it_handler, in case this interrupt occurs.
Change-Id: Iaf4fa408a8eff99498042e11e2d6177bad39868c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
On STM32MP15, only filters 0 and 1 are used.
Use TZC_400_REGION_ATTR_FILTER_BIT() macro for those 2 filters 0 and 1
instead of U(3).
Change-Id: Ibc61823842ade680f59d5b66b8db59b6a30080e4
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Addresses the deprecation warning produced by
drivers/arm/gic/common/gic_common.c.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Change-Id: I1a3ff4835d0f94c74b405db10622e99875ded82b
BIT24 of IPI command header is used to determine if caller is
secure or non-secure.
Mark BIT24 of IPI command header as non-secure if SMC caller
is non-secure.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Change-Id: Iec25af8f4b202093f58e858ee47cd9cd46890267
Versal is a72 based that's why there is no reason to build low level
assemble code for a53.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: Iff9cf2582102d951825b87fd9af18e831ca717d6
The FF-A v1.0 spec allows two configurations for the number of EC/vCPU
instantiated in a Secure Partition:
-A MultiProcessor (MP) SP instantiates as many ECs as the number of PEs.
An EC is pinned to a corresponding physical CPU.
-An UniProcessor (UP) SP instantiates a single EC. The EC is migrated to
the physical CPU from which the FF-A call is originating.
This change permits exercising the latter case within the TF-A-tests
framework.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I7fae0e7b873f349b34e57de5cea496210123aea0
Compiling BL31 for the Rockchip platform now produces a message about
the deprecation of gic_common.c.
Follow the advice and use include gicv2.mk instead.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Change-Id: I396b977d57975dba27cfed801ad5264bbbde2b5e
The case for value "VCOREFS_SMC_CMD_INIT" is not
terminated by a "break" statement.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Change-Id: I56cc7c1648e101c0da6e77e592e6edbd5d37724e
1 Only enable domain D0 and D1:PCIe access 0xC0000000~0xC4000000;
2 Only enable domain D0 and D3(SCP) access 0x50000000~0x51400000;
Signed-off-by: Xi Chen <xixi.chen@mediatek.com>
Change-Id: Ic4f9e6d85bfd1cebdb24ffc1d14309c89c103b2a
Low Power Management (LPM) helps find a suitable configuration
for letting system entering idle or suspend with the most
resources off.
Change-Id: Ie6a7063b666cf338cff5bc972c9025b26de482eb
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Add support for ZU43DR, ZU46DR and ZU47DR to the list of zynqmp
devices. The ZU43DR, ZU46DR and ZU47DR RFSoC silicon id values are
0x7d, 0x78 and 0x7f.
Signed-off-by: Sandeep Gundlupet Raju <sandeep.gundlupet-raju@xilinx.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I566f707116d83475de7c87a6004ca96bf7bccebe
This commit fixes the wrong memory type, secure NOR flash
shall be mapped as MT_DEVICE.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: I9c9ed51675d84ded675bb56b2e4ec7a08184c602
sbsa-ref in QEMU may create up to 512 cores.
This commit prepares the MP information to support 512 cores.
The number of xlat tables for spm_mm is also increased.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: I2788eaf6d14e188e9b5d1102d359b2899e02df7c
* changes:
plat/marvell/armada: cleanup MSS SRAM if used for copy
plat/marvell: cn913x: allow CP1/CP2 mapping at BLE stage
plat/marvell/armada/common/mss: use MSS SRAM in secure mode
include/drivers/marvell/mochi: add detection of secure mode
plat/marvell: fix SPD handling in dram port
marvell: drivers: move XOR0/1 DIOB from WIN 0 to 1
drivers/marvell/mochi: add support for cn913x in PCIe EP mode
drivers/marvell/mochi: add missing stream IDs configurations
plat/marvell/armada/a8k: support HW RNG by SMC
drivers/rambus: add TRNG-IP-76 driver
This patch cleans up the MSS SRAM if it was used for MSS image
copy (secure boot mode).
Change-Id: I23f600b512050f75e63d59541b9c21cef21ed313
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/30099
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Map IO WIN to CP1 and CP2 at all stages including the BLE.
Do not map CP1/CP2 if CP_NUM is lower than 2 and 3 accordingly.
This patch allows access to CP1/CP2 internal registers at
BLE stage if CP1/CP2 are connected.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Change-Id: Icf9ffdf2e9e3cdc2a153429ffd914cc0005f9eca
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/36939
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Reviewed-by: Yi Guo <yi.guo@cavium.com>
Reviewed-by: Ofer Heifetz <oferh@marvell.com>
The CP MSS IRAM is only accessible by CM3 CPU and MSS DMA.
In secure boot mode the MSS DMA is unable to directly load
the MSS FW image from DRAM to IRAM.
This patch adds support for using the MSS SRAM as intermediate
storage. The MSS FW image is loaded by application CPU into the
MSS SRAM first, then transferred to MSS IRAM by MSS DMA.
Such change allows the CP MSS image load in secure mode.
Change-Id: Iee7a51d157743a0bdf8acb668ee3d599f760a712
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Grzegorz Jaszczyk <jaszczyk@marvell.com>
Removing the custom crash implementation and use
plat/common/aarch64/crash_console_helpers.S.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I045d42eb62bcaf7d1e18fbe9ab9fb9470e800215
* changes:
allwinner: Split native and SCPI-based PSCI implementations
allwinner: psci: Improve system shutdown/reset sequence
allwinner: psci: Drop .pwr_domain_pwr_down_wfi callback
allwinner: Separate code to power off self and other CPUs
Rename rd_n1e1_edge_scmi_plat_info array to plat_rd_scmi_info as the
same array is used to provide SCMI platform info across mulitple RD
platforms and is not resitricted to only RD-N1 and RD-E1 platforms.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I42ba33e0afa3003c731ce513c6a5754b602ec01f
Now that we have a framework for the SMCCC TRNG interface, and the
existing Juno entropy code has been prepared, add the few remaining bits
to implement this interface for the Juno Trusted Entropy Source.
We retire the existing Juno specific RNG interface, and use the generic
one for the stack canary generation.
Change-Id: Ib6a6e5568cb8e0059d71740e2d18d6817b07127d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The Juno Trusted Entropy Source has a bias, which makes the generated
raw numbers fail a FIPS 140-2 statistic test.
To improve the quality of the numbers, we can use the CPU's CRC
instructions, which do a decent job on conditioning the bits.
This adds a *very* simple version of arm_acle.h, which is typically
provided by the compiler, and contains the CRC instrinsics definitions
we need. We need the original version by using -nostdinc.
Change-Id: I83d3e6902d6a1164aacd5060ac13a38f0057bd1a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
NXP specifc macro SET_NXP_MAKE_FLAG is added.
NXP has pool of multiple IPs. This macro helps:
- In soc.mk, this macro help the selected IP source files to be included
for that SoC.
-- The set of IPs required for one NXP SoC is different to the set of IPs
required by another NXP SoC.
- For the same SoC,
-- For one feature, the IP may be required in both BL2 and BL31.
-- Without the above feature, that IP may be required in one.
This macro help in selecting the inclusion of source and header files to:
--- BL2 only
--- BL31 only
--- COMM (used by BL2 and BL31)
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I2cdb13b89aa815fc5219cf8bfb9666d0a9f78765
Madhukar Pappireddy
Heyi Guo
Venkatesh Yadav Abbarapu
Bipin Ravi
André Przywara
Omkar Anand Kulkarni
Sandrine Bailleux
Aditya Angadi
Thomas Abraham
Bharat Gooty
johpow01
Joanna Farley
Pankaj Gupta
Samuel Holland
Ying-Chun Liu (PaulLiu)
Yann Gautier
Jan Kiszka
Tejas Patel
Olivier Deprez
Michal Simek
Usama Arif
Heiko Stuebner
Roger Lu
Xi Chen
Masahisa Kojima
Manish Pandey
Konstantin Porotchkin