Added a new STM32MP_EMMC_BOOT option, which is used to look for SSBL in
the same eMMC boot partition TF-A booted from at a fixed 256k offset. In
case STM32 image header is not found, the boot process rolls back to a
GPT partition look-up scheme.
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com>
Change-Id: I85a87dc9ae7f2b915ed8e584be80f4b3588efc48
Add basic SDEI support, implementing the software event 0 only for now.
This already allows hypervisors like Jailhouse to use SDEI for internal
signaling while passing the GICC through to the guest (see also IMX8).
With SDEI on, we overrun the SRAM and need to stay in DRAM. So keep SDEI
off by default.
Co-developed-by: Angelo Ruocco <angeloruocco90@gmail.com>
Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Change-Id: Ic0d71b4ef0978c0a34393f4e3530ed1e24a39ca2
The io_dummy code and function calls are only used in case BL32 is TF-A
SP_min, and not OP-TEE. This code in bl2_io_storage can then be put under
#ifndef AARCH32_SP_OPTEE.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I52787a775160b335f97547203f653419621f5147
STM32MP1 does not use BL1, the loading of BL2 is done by ROM code. It is
then useless to have an entry BL2_IMAGE_ID in the policies.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I464cedf588114d60522433123f8dbef32ae36818
Fix a remainder from early prototyping. OP-TEE as a secure partition
does not need specific SMC function id pass through to EL3.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I2843d1b9a5eb4c966f82790e1655fb569c2de7d4
The UUID strings used in FW_CONFIG DT are not aligned with UUIDs defined
in include/tools_share/firmware_image_package.h for BL32_EXTRA1 and
TRUSTED_KEY_CERT.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I517f8f9311585931f2cb931e0588414da449b694
The UART code for the A3K platform assumes that UART parent clock rate
is always 25 MHz. This is incorrect, because the xtal clock can also run
at 40 MHz (this is board specific).
The frequency of the xtal clock is determined by a value on a strapping
pin during SOC reset. The code to determine this frequency is already in
A3K's comphy driver.
Move the get_ref_clk() function from the comphy driver to a separate
file and use it for UART parent clock rate determination.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I8bb18a2d020ef18fe65aa06ffa4ab205c71be92e
Macros PLAT_MARVELL_BOOT_UART* and PLAT_MARVELL_CRASH_UART* are defined
to same values. De-duplicate them into PLAT_MARVELL_UART* macros.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iae5daf7cad6a971e6f3dbe561df3d0174106ca7f
Macros PLAT_MARVELL_BL31_RUN_UART* are not used since commit
d7c4420cb8 ("plat/marvell: Migrate to multi-console API").
Remove them.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I5ec959ef4de87dcfb332c017ad2599bf8af6ffc3
Morello exhibits the behavior similar to Juno wherein CNTBaseN.CNTFRQ
can be written but does not reflect the value of the CNTFRQ register
in CNTCTLBase frame. This doesn't follow ARM ARM in that the value
updated in CNTCTLBase.CNTFRQ is not reflected in CNTBaseN.CNTFRQ.
Hence enable the workaround (applied to Juno) for Morello that updates
the CNTFRQ register in the Non Secure CNTBaseN frame.
Change-Id: Iabe53bf3c25152052107e08321323e4bde5fbef4
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
Add support for XCK26 silicon which is available on SOM board.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: Ic98213328702903af8a79f487a2868f3e6d60338
This patch renames the Matterhorn, Matterhorn ELP, and Klein CPUs to
Cortex A710, Cortex X2, and Cortex A510 respectively.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I056d3114210db71c2840a24562b51caf2546e195
UART parent clock is by default the platform's xtal clock, which is
25 MHz.
The value defined in the driver, though, is 25.8048 MHz. This is a hack
for the suboptimal divisor calculation
Divisor = UART clock / (16 * baudrate)
which does not use rounding division, resulting in a suboptimal value
for divisor if the correct parent clock rate was used.
Change the code for divisor calculation to
Divisor = Round(UART clock / (16 * baudrate))
and change the parent clock rate value to 25 MHz.
The final UART divisor for default baudrate 115200 is not affected by
this change.
(Note that the parent clock rate should not be defined via a macro,
since the xtal clock can also be 40 MHz. This is outside of the scope of
this fix, though.)
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iaa401173df87aec94f2dd1b38a90fb6ed0bf0ec6
Create a dedicated static struct mmc_device_info mmc_info mmc_info
instead of having this in stack.
A boot issue has been seen on some platform when applying patch [1].
[1] 13f3c5166f ("mmc:prevent accessing to the released space in case of wrong usage")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Iba0424a5787f9e510a60696d4033db1b49b243b2
Use the macros that are now defined in include/lib/smccc.h.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ibe3c17acd2482b7779318c8a922a138dcace5554
Use the macros that are now defined in include/lib/smccc.h.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ie1dbc54569086f6a74206b873fee664b4cdeea36
Use the macros that are now defined in include/lib/smccc.h.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I688a76277b729672835d51fafb68d1d6205b6ae4
The JEDEC information for STMicroelectronics is:
JEDEC_ST_MFID U(0x20)
JEDEC_ST_BKID U(0x0)
And rely on platform functions to get chip IP and revision.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I4fa4ac8bb5583b1871b768decc9fe08e8966ff54
Three functions are exported to get SoC version, SoC device ID, and SoC
name. Those functions are based on reworked existing static functions.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I1f3949062bb488286a9e7a38ffcd1457953dac56
The SGI/RD platforms have been using PSCI state ID format as defined in
PSCI version prior to 1.0. This is being changed and the PSCI extended
state ID format as defined in PSCI version 1.1 is being adapted. In
addition to this, the use of Arm recommended PSCI state ID encoding is
enabled as well.
Change-Id: I2be8a9820987a96b23f4281563b6fa22db48fa5f
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
Update idle flow in case of last read command timeout.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Change-Id: Idb0552d70d59b23822c38269d0fa9fe9ac0d6975
MTK display port mute/unmute control registers need to be
set in secure world.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Iec73650e937bd20e25c18fa28d55ae29e68b10d3
Use proper offset for IPI data based on offset for IPI0
channel.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Change-Id: I3070517944dd353c3733aa595df0da030127751a
The PCIe root port is outside of the current RPi
MMIO regions, so we need to adjust the address map.
Given much of the code depends on the legacy IOBASE
lets separate that from the actual MMIO begin/end.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Change-Id: Id65460ae58556bd8826dba08bbad79953e2a7c0b
Add APU iommap settings for reviser, apu_ao and
devapc control wrapper.
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
Change-Id: Ie8e6a197c0f440f9e4ee8101202283a2dbf501a6
In iMX8MM it is possible to have two copies of bootloader in
SD/eMMC and switch between them. The switch is triggered either
by the BootROM in case the bootloader image is faulty OR can be
enforced by the user. To trigger that switch the
PERSIST_SECONDARY_BOOT bit should be set in GPR10 SRC register.
As the bit is retained after WARM reset, that permits to control
BootROM behavior regarding what boot image it will boot after
reset: primary or secondary.
This is useful for reliable bootloader A/B updates, as it permits
switching between two copies of bootloader at different offsets of
the same storage.
If the PERSIST_SECONDARY_BOOT is 0, the boot ROM uses address
0x8400 for the primary image. If the PERSIST_SECONDARY_BOOT is 1,
the boot ROM reads that secondary image table from address 0x8200
on the boot media and uses the address specified in the table for
the secondary image.
Secondary Image Table contains the sector of secondary bootloader
image, exluding the offset to that image (explained below in the
note). To generate the Secondary Image Table, use e.g.:
$ printf '\x0\x0\x0\x0\x0\x0\x0\x0\x33\x22\x11'
'\x00\x00\x10\x0\x0\x00\x0\x0\x0'
> /tmp/sit.bin
$ hexdump -vC /tmp/sit.bin
00000000 00 00 00 00
00000004 00 00 00 00
00000008 33 22 11 00 <--- This is the "tag"
0000000c 00 10 00 00 <--- This is the "firstSectorNumber"
00000010 00 00 00 00
You can also use NXP script from [1][2] imx-mkimage tool for
SIT generation. Note that the firstSectorNumber is NOT the offset
of the IVT, but an offset of the IVT decremented by Image Vector
Table offset (Table 6-25. Image Vector Table Offset and Initial
Load Region Size for iMX8MM/MQ), so for secondary SPL copy at
offset 0x1042 sectors, firstSectorNumber must be 0x1000
(0x42 sectors * 512 = 0x8400 bytes offset).
In order to test redundant boot board should be closed and
SD/MMC manufacture mode disabled, as secondary boot is not
supported in the SD/MMC manufacture mode, which can be disabled
by blowing DISABLE_SDMMC_MFG (example for iMX8MM):
> fuse prog -y 2 1 0x00800000
For additional details check i.MX 8M Mini Apllication Processor
Reference Manual, 6.1.5.4.5 Redundant boot support for
expansion device chapter.
[1] https://source.codeaurora.org/external/imx/imx-mkimage/
[2] scripts/gen_sit.sh
Change-Id: I0a5cea7295a4197f6c89183d74b4011cada52d4c
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Added support for HW computed CRC using Arm ACLE intrinsics.
These are built-in intrinsics available for ARMv8.1-A, and
onwards.
These intrinsics are enabled via '-march=armv8-a+crc' compile
switch for ARMv8-A (supports CRC instructions optionally).
HW CRC support is enabled unconditionally in BL2 for all Arm
platforms.
HW CRC calculation is verified offline to ensure a similar
result as its respective ZLib utility function.
HW CRC calculation support will be used in the upcoming
firmware update patches.
Change-Id: Ia2ae801f62d2003e89a9c3e6d77469b5312614b3
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Disable non-invasive debug of secure state for Juno
in release builds. This makes sure that PMU counts
only Non-secure events.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I0d1c3f96f3b4e48360a7211ae55851d65d291025
This patch adds support for the crypto and secure storage secure
partitions for the Total Compute platform. These secure partitions
have to be managed by Hafnium executing at S-EL2
Change-Id: I2df690e3a99bf6bf50e2710994a905914a07026e
Signed-off-by: Davidson K <davidson.kumaresan@arm.com>
AMU counters are used for monitoring the CPU performance. RD-V1-MC
platform has architected AMU available for each core. Enable the use of
AMU by non-secure OS for supporting the use of counters for processor
performance control (ACPI CPPC).
Change-Id: I33be594cee669e7f4031e5e5a371eec7c7451030
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
on i.MX8MP A1 silicon, the OCRAM space is extended to 512K + 64K,
currently, OCRAM @0x960000-0x980000 is reserved for BL31, it will
leave the last 64KB in non-continuous space. To provide a continuous
384KB + 64KB space for generic use, so move the BL31 space to
0x970000-0x990000 range.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I96d572fc0f87f05a60f55e0552a68b6e70f8e7f4
the 'always_on' member should be initialized from 'on'.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I5746ff40075b4fcda2ac7d04a8d7f1269af17e91
* changes:
stm32mp1: enable PIE for BL32
stm32mp1: set BL sizes regardless of flags
Add PIE support for AARCH32
Avoid the use of linker *_SIZE__ macros
Added GPT parser support in BL2 for Arm platforms to get the entry
address and length of the FIP in the GPT image.
Also, increased BL2 maximum size for FVP platform to successfully
compile ROM-enabled build with this change.
Verified this change using a patch:
https://review.trustedfirmware.org/c/ci/tf-a-ci-scripts/+/9654
Change-Id: Ie8026db054966653b739a82d9ba106d283f534d0
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
NOTE: Breaking change to the way UUIDs are stored in the DT
Currently, UUIDs are stored in the device tree as
sequences of 4 integers. There is a mismatch in endianness
between the way UUIDs are represented in memory and the way
they are parsed from the device tree. As a result, we must either
store the UUIDs in little-endian format in the DT (which means
that they do not match up with their string representations)
or perform endianness conversion after parsing them.
Currently, TF-A chooses the second option, with unwieldy
endianness-conversion taking place after reading a UUID.
To fix this problem, and to make it convenient to copy and
paste UUIDs from other tools, change to store UUIDs in string
format, using a new wrapper function to parse them from the
device tree.
Change-Id: I38bd63c907be14e412f03ef0aab9dcabfba0eaa0
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Replaced PLAT_ARM_FIP_BASE and PLAT_ARM_FIP_MAX_SIZE macro with a
generic name PLAT_ARM_FLASH_IMAGE_BASE and PLAT_ARM_FLASH_IMAGE_MAX_SIZE
so that these macros can be reused in the subsequent GPT based support
changes.
Change-Id: I88fdbd53e1966578af4f1e8e9d5fef42c27b1173
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This new compile option is only for Armada 3720 Development Board. When
it is set to 1 then TF-A will setup PM wake up src configuration.
By default this new option is disabled as it is board specific and no
other A37xx board has PM wake up src configuration.
Currently neither upstream U-Boot nor upstream Linux kernel has wakeup
support for A37xx platforms, so having it disabled does not cause any
issue.
Prior this commit PM wake up src configuration specific for Armada 3720
Development Board was enabled for every A37xx board. After this change it
is enabled only when compiling with build flag A3720_DB_PM_WAKEUP_SRC=1
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I09fea1172c532df639acb3bb009cfde32d3c5766
Add board support for RD-N2 Cfg1 variant of RD-N2 platform. It is a
variant of RD-N2 platform with a reduced interconnect mesh size (3x3)
and core count (8-cores). Its platform variant id is 1.
Change-Id: I34ad35c5a5c1e9b69a658fb92ed00e5bc5fe72f3
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
A Neoverse reference design platform can have two or more variants that
differ in core count, cluster count or other peripherals. To allow reuse
of platform code across all the variants of a platform, introduce build
option CSS_SGI_PLATFORM_VARIANT for Arm Neoverse reference design
platforms. The range of allowed values for the build option is platform
specific. The recommended range is an interval of non negative integers.
An example usage of the build option is
make PLAT=rdn2 CSS_SGI_PLATFORM_VARIANT=1
Change-Id: Iaae79c0b4d0dc700521bf6e9b4979339eafe0359
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
This will help in keeping source file generic and conditional
compilation can be contained in platform provided dt files.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I3c6e0a429073f0afb412b9ba521ce43f880b57fe
sgm775 is an old platform and is no longer maintained by Arm and its
fast model FVP_CSS_SGM-775 is no longer available for download.
This platform is now superseded by Total Compute(tc) platforms.
This platform is now deprecated but the source will be kept for cooling
off period of 2 release cycle before removing it completely.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I8fe1fc3da0c508dba62ed4fc60cbc1642e0f7f2a
mt8195 also uses mt6359p RTC. Revice mt8192 RTC and share the
driver with mt8195.
Change-Id: I20c73f6e0af67ef9d4c3d4e0ff373f93950e07db
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
mt8195 also uses PMIC mt6359p. The only difference is the
pwrap register definition.
Change-Id: I9962263c46187d1344f14f857bf4b51e33aedda0
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Implement PSCI platform OPs to support CPU hotplug and MCDI.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Change-Id: I1321f7989c8a3d116d698768a7146e8f180ee9c0
Add MCDI related drivers to handle CPU powered on/off in CPU suspend.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Change-Id: I6a6f9bf5d1d8bda1ee603d8bf3fc206437de7ad8
The timer driver can be shared with mt8195. Move the the timer
driver to common/.
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Change-Id: I84c97ab9cc9b469f35e0f44dd8e7b2b95f1b3926
MT8192 cirq driver can be shared with MT8195. Move cirq driver to common
common folder.
Signed-off-by: gtk_pangao <gtk_pangao@mediatek.com>
Change-Id: Iba5cdcfd2116f0bd07e0497250f2da45613e3a4f
MT8192 GIC driver can be shared with MT8195. Move GIC driver to common
and do the initialization.
Signed-off-by: christine.zhu <christine.zhu@mediatek.corp-partner.google.com>
Change-Id: I63f3e668b5ca6df8bcf17b5cd4d53fa84f330fed
Upon recieving the interrupt send an SGI.
The sgi number is communicated by linux.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Change-Id: Ib8f07ff7132ba5ac202b546914efb16d04820ed3
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Add support for the trapping the IPI in TF-A.
Register handler for the irq no 62 which is the IPI interrupt.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Change-Id: I9c04fdae7be3dda6a34a9b196274c0b5fdf39223
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
* changes:
renesas: rzg: Add support to identify EK874 RZ/G2E board
drivers: renesas: common: watchdog: Add support for RZ/G2E
drivers: renesas: rzg: Add QoS support for RZ/G2E
drivers: renesas: rzg: Add PFC support for RZ/G2E
drivers: renesas: common: Add support for DRAM initialization on RZ/G2E SoC
renesas: rzg: Add support to identify HopeRun HiHope RZ/G2N board
drivers: renesas: common: emmc: Select eMMC channel for RZ/G2N SoC
drivers: renesas: rzg: Add QoS support for RZ/G2N
drivers: renesas: rzg: Add PFC support for RZ/G2N
drivers: renesas: common: Add support for DRAM initialization on RZ/G2N SoC
renesas: rzg: Add support to identify HopeRun HiHope RZ/G2H board
drivers: renesas: common: emmc: Select eMMC channel for RZ/G2H SoC
drivers: renesas: rzg: Add QoS support for RZ/G2H
drivers: renesas: rzg: Add PFC support for RZ/G2H
drivers: renesas: common: Add support for DRAM initialization on RZ/G2H SoC
drivers: renesas: rzg: Switch using common ddr code
drivers: renesas: ddr: Move to common
In order to prepare future support of FIP, BL32 (SP_min) is compiled
as Position Independent Executable.
Change-Id: I15e7cc433fb03e1833002f4fe2eaecb6ed42eb47
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
BL2 size is set to 100kB, and BL32 to 72kB, regardless of OP-TEE
or stack protector flags.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Id7411bd55a4140718d64a647d81037720615fc81
Counter frequency for generic timer of Arm-A53 based Application
Processing Unit(APU) is not configuring in case if First Stage Boot
Loader(FSBL) does not initialize counter frequency. This happens
when FSBL is running from Arm-R5 based Real-time Processing Unit(RPU).
Because of that generic timer driver functionality is not working.
So configure counter frequency during initialization.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: Icfccd59d7d2340fba25ebfb2ef6a813af4290896
Add support for CRC checksum for IPI data when the macro
IPI_CRC_CHECK is enabled.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I3c25c715885759076055c6505471339b5d6edcd5
Rename the macro ZYNQMP_IPI_CRC_CHECK to IPI_CRC_CHECK and
move the related defines to the common include.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I6d30b081ac607572a0b23e10ca8031bc90489e58
ELP processors can sometimes have different MIDR values or features so
we are adding the "_arm" suffix to differentiate the reference
implementation from other future versions.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ieea444288587c7c18a397d279ee4b22b7ad79e20
Add support to identify Silicon Linux RZ/G2E evaluation kit (EK874).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: Id7bdbc9b0d25aa9af496d58d4bd5055579edc104
DRAM initialization on RZ/G2E SoC is identical to R-Car E3 so re-use the
same.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: I454fb40af4f8ce6c4c0d2a53edb307326efd02df
Add support for initializing DRAM on RZ/G2N SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: Id09a367b92b11a5da88f2dce6887677cc935d0c0
Add support for initializing DRAM on RZ/G2H SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: Iae23f1093f65a9efd065d37b7d6e9340ff6350b9
Switch using common ddr driver code from renesas/common/ddr directory
for RZ/G2M SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: I807dcb0bc5186bd32bc1c577945d28634bb10e1f
Move ddr driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: I9aef73d3e9a027a127ce7483b72d339559866727
By default the Arm Ethos-N NPU will boot up in secure mode. In this mode
the non-secure world cannot access the registers needed to use the NPU.
To still allow the non-secure world to use the NPU, a SiP service has
been added that can delegate non-secure access to the registers needed
to use it.
Only the HW_CONFIG for the Arm Juno platform has been updated to include
the device tree for the NPU and the platform currently only loads the
HW_CONFIG in AArch64 builds.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I65dfd864042ed43faae0a259dcf319cbadb5f3d2
To make it possible to use the hw_config device tree for dynamic
configuration in BL31 on the Arm Juno platform. A placeholder hw_config
has been added that is included in the FIP and a Juno specific BL31
setup has been added to populate fconf with the hw_config.
Juno's BL2 setup has been updated to align it with the new behavior
implemented in the Arm FVP platform, where fw_config is passed in arg1
to BL31 instead of soc_fw_config. The BL31 setup is expected to use the
fw_config passed in arg1 to find the hw_config.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: Ib3570faa6714f92ab8451e8f1e59779dcf19c0b6
Subversion is not reflecting the Marvell sources variant anymore.
This patch removes version.mk from Marvell plafroms.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Change-Id: I8f3afbe3fab3a38da68876f77455f449f5fe0179
Move efuse definitions to a separate header file for later
usage with other FW modules.
Change-Id: I2e9465f760d0388c8e5863bc64a4cdc57de2417f
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/47313
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Yi Guo <yi.guo@cavium.com>
Use single 64b register for the return value instead of two 32b.
Report an error if caller requested larger than than 64b random
number in a single SMC call.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Change-Id: Ib8756cd3c0808b78c359f90c6f6913f7d16ac360
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/33280
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
This patch forces rx training on 10G ports
as part of comphy_smc call from Linux.
Signed-off-by: Alex Evraev <alexev@marvell.com>
Change-Id: Iebe6ea7c8b21cbdce5c466c8a69b92e9d7c8a8ca
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/30763
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Normally the CP MSS CPU was started at the end of FW load to IRAM at BL2.
However, (especailly in secure boot mode), some bus attributes should be
changed from defaults before the MSS CPU tries to access shared resources.
This patch starts to use CP MSS SRAM for FW load in both secure and
non-secure boot modes.
The FW loader inserts a magic number into MSS SRAM as an indicator of
successfully loaded FS during the BL2 stage and skips releasing the MSS
CPU from the reset state.
Then, at BL31 stage, the MSS CPU is released from reset following the
call to cp110_init function that handles all the required bus attributes
configurations.
Change-Id: Idcf81cc350a086835abed365154051dd79f1ce2e
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/46890
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Fixed a bug that the actually bit number was used as a mask to
select LD0 or LD1 fuse
Signed-off-by: Guo Yi <yguo@cavium.com>
Change-Id: I4bec268c3dc2566350b4a73f655bce222707e25b
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/46146
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Setting MSS_SUPPORT to 0 also removes requirement for SCP_BL2
definition.
Images build with MSS_SUPPORT=0 will not include service CPUs
FW and will not support PM, FC and other features implemented
in these FW images.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Change-Id: Idf301ebd218ce65a60f277f3876d0aeb6c72f105
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/37769
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Ofer Heifetz <oferh@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Since the dfx register set is going to be marked as secure expose dfx
secure read and write function via SiP services. In introduced misc_dfx
driver some registers are white-listed so non-secure software can still
access them.
This will allow non-secure word drivers access some white-listed
registers related to e.g.: Sample at reset, efuses, SoC type and
revision ID accesses.
Change-Id: If9ae2da51ab2e6ca62b9a2c940819259bf25edc0
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-on: https://sj1git1.cavium.com/25055
Tested-by: Kostya Porotchkin <kostap@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Since more drivers which uses dfx register set need to be handled with
use of SiP services, use dedicated and more meaningful name for thermal
SiP services.
Change-Id: Ic2ac27535a4902477df8edc4c86df3e34cb2344f
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-on: https://sj1git1.cavium.com/25054
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Since the dfx register set is going to be marked as secure (in order to
protect efuse registers for non secure access), accessing thermal
registers which are part of dfx register set, will not be possible from
lower exception levels. Due to above expose thermal driver as a SiP
service. This will allow Linux and U-Boot thermal driver to initialise
and perform various operations on thermal sensor.
The thermal sensor driver is based on Linux
drivers/thermal/armada_thermal.c.
Change-Id: I4763a3bf5c43750c724c86b1dcadad3cb729e93e
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-on: https://sj1git1.cavium.com/20581
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Tested-by: Kostya Porotchkin <kostap@marvell.com>
Remove an incorrect tabulation in front of an $(error) function call
outside of a recipe, which caused the following text to be displayed:
plat/arm/board/common/board_common.mk:36: *** recipe commences before first target. Stop.
instead of:
plat/arm/board/common/board_common.mk:36: *** "Unsupported ARM_ROTPK_LOCATION value". Stop.
Change-Id: I8592948e7de8ab0c4abbc56eb65a53eb1875a83c
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
UART register definition is the same on MediaTek platforms.
Move uart.h to common folder and remove the duplicate file.
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Change-Id: Iea0931dfd606ae4a7ab475b9cb3a08dc6de68b36
The number of ITS have changed from 4 to 1, resulting
in GICR base address change.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: I28101f0d1faf9f3c58591b642033c3fd49a275e7
Add support to qemu "max" cpu for both "qemu" ('virt') and
"qemu_sbsa" ('sbsa-ref') platforms.
Change-Id: I36e45c0a3c4e30ba546d2a3cb44dfef11a680305
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Cortex-A72 support is already enabled for sbsa-ref platform,
so add it also to virt platform for parity.
Change-Id: Ib0a2ce81ef7c0a71ef8dc66dbec179191bf2e6cc
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
The build now gives deprecation warnings for including
drivers/arm/gic/common/gic_common.c directly. Move to including the
common gicv2 sources via gicv2.mk instead - which also matches the
pattern already used for gicv3.
Change-Id: I5332fb52c5801272e5e2bb6111f96087b4894325
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
NT_FW_CONFIG file is meant to be passed from BL31 to be consumed by
BL33, fvp platforms use this to pass measured boot configuration and
the x0 register is used to pass the base address of it.
In case of hafnium used as hypervisor in normal world, hypervisor
manifest is expected to be passed from BL31 and its base address is
passed in x0 register.
As only one of NT_FW_CONFIG or hypervisor manifest base address can be
passed in x0 register and also measured boot is not required for SPM so
disable passing NT_FW_CONFIG.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ifad9d3658f55ba7d70f468a88997d5272339e53e
Create a dedicated static struct mmc_device_info mmc_info mmc_info
instead of having this in stack.
A boot issue has been seen on some platform when applying patch [1].
[1] 13f3c5166f ("mmc:prevent accessing to the released space in case of wrong usage")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I73a079715253699d903721c865d6470d58f6bd30
Create a dedicated static struct mmc_device_info mmc_info mmc_info
instead of having this in stack.
A boot issue has been seen on some platform when applying patch [1].
[1] 13f3c5166f ("mmc:prevent accessing to the released space in case of wrong usage")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Id52c0be61a30f453a551385883eaf3cbe32b04b9
Create a dedicated static struct mmc_device_info mmc_info mmc_info
instead of having this in stack.
A boot issue has been seen on some platform when applying patch [1].
[1] 13f3c5166f ("mmc:prevent accessing to the released space in case of wrong usage")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: If5db8857cccec2e677b16a38eb3eeb41628a264c
Refine the function plat_add_sp_images_load_info() by saving the
previous node and only setting its next link when the current node is
valid. This can reduce the check for the next node and simply the
total logic.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I4061428bf49ef0c3816ac22aaeb2e50315531f88
The traverse flow in function plat_add_sp_images_load_info() will find
the last node in the main load info list, with its
next_load_info==NULL. However this node is still useful and should not
be overridden with SP node info.
The bug will cause below error on RDN2 for spmd enabled:
ERROR: Invalid NT_FW_CONFIG DTB passed
Fix the bug by only setting the next_load_info of the last node in the
original main node list.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: Icaee5da1f2d53b29fdd6085a8cc507446186fd57
As per the new multi-console framework, updating the JTAG DCC support.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I77994ce387caf0d695986df3d01d414a920978d0
As per the new multi-console framework, updating the JTAG DCC support.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I62cfbb57ae7e454fbc91d1c54aafa6e99f9a35c8
* changes:
plat/sgi: allow usage of secure partions on rdn2 platform
board/rdv1mc: initialize tzc400 controllers
plat/sgi: allow access to TZC controller on all chips
plat/sgi: define memory regions for multi-chip platforms
plat/sgi: allow access to nor2 flash and system registers from s-el0
plat/sgi: define default list of memory regions for dmc620 tzc
plat/sgi: improve macros defining cper buffer memory region
plat/sgi: refactor DMC-620 error handling SMC function id
plat/sgi: refactor SDEI specific macros
Define a GUID that should be used in the header of MM communicate
message originating due to a dmc620 ECC error interrupt. So the use
of SMC ID in 'sgi_ras_ev_map' to represent the interrupt event is
removed.
In addition to this, update the dmc620 error record data structure to
use aux_data to indicate the dmc620 instance number on which the ECC
error interrupt occurred.
Signed-off-by: Omkar Anand Kulkarni <omkar.kulkarni@arm.com>
Change-Id: I18c8ef5ba6483bb1bce6464ee9be0c2aabec4baa
Olivier Deprez
Vyacheslav Yurkov
Madhukar Pappireddy
Jan Kiszka
Yann Gautier
Pali Rohár
Manoj Kumar
Jiaxin Yu
Venkatesh Yadav Abbarapu
johpow01
Pranav Madhu
Hsin-Hsiung Wang
Flora Fu
Rex-BC Chen
Rajan Vaja
Jeremy Linton
Mark Dykes
Igor Opaniuk
Manish V Badarkhe
Zelalem
Davidson K
Manish Pandey
Jacky Bai
David Horstmann
Aditya Angadi
Yidi Lin
mtk20895
James Liao
gtk_pangao
christine.zhu
Shubhrajyoti Datta
bipin.ravi
Lad Prabhakar
Mikael Olsson
Konstantin Porotchkin
Alex Evraev
Guo Yi
Grzegorz Jaszczyk
Alex Leibovich
Nina Wu
Sandrine Bailleux
Usama Arif
Leif Lindholm
Heyi Guo
André Przywara
Omkar Anand Kulkarni