Warnings about header files include order were triggered by CI.
Correct the include order to mathc CI requirements.
Change-Id: Iaca959add924e0e1fa2e56fab2348f0ee36e5fa7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Threat model for the current, BL1-only R-class support.
Signed-off-by: Gary Morrison <gary.morrison@arm.com>
Change-Id: I8479d5cb30f3cf3919281cc8dc1f21cada9511e0
ENABLE_FEAT_FGT and ENABLE_FEAT_ECV macros are used to access
HDFGRTR_EL2 and CNTPOFF_EL2 registers respectively. These flags are set
to true for v8.6 and upwards and are not handled explicitly for lower
architecture versions.
This patch adds definitive default value to these build macros, so that
for v8.5 and below, they are not overridden and set to true by the gcc.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: Ic300194c8ad77558be9a0e00153e42185bf2c58c
Document `boot-order` field from FF-A partitions manifest, in accordance
to Hafnium's (SPM) implementation.
Signed-off-by: J-Alves <joao.alves@arm.com>
Change-Id: I9fd070100ee52e0d465d2cce830cc91d78bddfc0
* changes:
feat(st): protect UART during platform init
feat(stm32mp1): update console management for SP_min
refactor(stm32mp1): improve console management in BL2
feat(plat/st): add a function to configure console
feat(stm32mp1): add stm32_get_boot_interface function
refactor(stm32mp1): move stm32_save_boot_interface()
fix(stm32mp1): deconfigure UART RX pins
feat(stm32_gpio): add a function to reset a pin
refactor(stm32mp1): sort compilation flags
feat(stm32mp1): add sign-compare warning
Protect the UART instance used for serial boot
with UART used for console.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: Ieee1557b34e7baa81594c3fbf0513191737027bf
Use stm32mp_uart_console_setup() in SP_min setup.
Adapt the function stm32mp_uart_console_setup() for BL32 (no reset, add
CONSOLE_FLAG_RUNTIME under DEBUG.
Change-Id: Ib2d35c8d285dafb680aa218872ad679cbf43d0ed
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Use newly created function stm32mp_uart_console_setup().
And remove now useless code.
Change-Id: Ib8d0319d3f4f54309848bc225b58608cea73bad9
Signed-off-by: Yann Gautier <yann.gautier@st.com>
To ease console configuration, a dedicated function is created:
stm32mp_uart_console_setup(). The code will also be common for the
different BLs.
Change-Id: Idf3cad756f125ca2313cf30b1311637a9df8f27f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add function stm32_get_boot_interface to get the current boot interface
from information saved in the TAMP register.
Change-Id: I23af43c68eeaebe4c45920a57d739117aea3fbb1
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
The function stm32_save_boot_interface()is moved to stm32mp1_private.c
file. The files stm32mp1_context.{c,h} are removed.
As return is always 0, change the function to return void.
Call it earlier, to be able to use it when configuring console.
Change-Id: I8986e1257dc8e8708eab044a51ea1f2426b16597
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Those pins are configured by ROM code, for serial boot use cases.
Their configs are reset if the boot is done on UART, but not on USB.
This should then be done in TF-A. This has to be done after clock
init, and before console is configured.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I29a9694e25fcf1665360dd71f73937f769c43b52
Add set_gpio_reset_cfg() to set a pin in its reset configuration:
analog, no-pull, speed low, and its secure configuration, thanks to
stm32_gpio_is_secure_at_reset().
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I7b73c3636859f97fcc57f81cf68b42efc727922e
Sort the compilation flags in platform.mk when checking and defining
them for C files.
Change-Id: I5a08399c89ede4c0bd8697045706122732205db5
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Thanks to dyn_cfg_dtb_info_get_index(), we can check if TOS_FW_CONFIG
is inside the FIP partition. If not we can skip its treatment when
populating FIP images.
Change-Id: If5623eabd1ba484549d4a908d4a6f43325b36875
Signed-off-by: Yann Gautier <yann.gautier@st.com>
A new function dyn_cfg_dtb_info_get_index() is created to get the index
of the given image config_id in the dtb_infos pool.
This allows checking if an image with a specific ID is in the FIP.
Change-Id: Ib300ed08e5b8a683dc7980a90221c305fb3f457d
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This patch adds macros explicit to the features - FEAT_FGT,FEAT_AMUv1
and FEAT_ECV respectively. It assists in controlled access to the set
of registers (HDFGRTR_EL2, HAFGRTR_EL2 and CNTPOFF_EL2) under the
influence of these features during context save and restore routines.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I5082ea6687a686d8c5af3fe8bf769957cf3078b0
The HAFGRTR_EL2 register is UNDEFINED unless the CPU supports both
FEAT_FGT and FEAT_AMUv1. FEAT_FGT is mandatory for v8.6-A and upwards,
but FEAT_AMUv1 is optional (from v8.4-A upwards), and as such any
8.6-A cores today without support for FEAT_AMUv1 will trigger an
undefined instruction exception on accessing this register.
Currently ARM_ARCH_AT_LEAST macro has been used to associate with an
architecture extension allowing to access HAFGRTR_EL2 register. This
condition should be replaced with macros specific to individual
features. This patch adds a new set of macros "ENABLE_FEAT_FGT,
ENABLE_FEAT_AMUv1, ENABLE_FEAT_ECV" under build options to provide
controlled access to the HAFGRTR_EL2 register.
Further to ensure that the the build options passed comply
with the given hardware implementation, a feature detection mechanism,
checking whether build options match with the architecture is required
at bootime. This will be implemented and pushed later in a separate
patch.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: Ie390f4babe233b8b09455290277edbddecd33ead
With new gcc11.2 by default the -mbranch-protection is
set to "standard" which is leading to increase the text
section by 4Kb. As the ZynqMP uses the ARMv8 architecture,
so there is no impact when we disable the branch protection.
These instructions do not provide the branch protection in
architectures before Armv8.3-A.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I36f7a55abf99f50df2ee265255598d83b1f480c6
This patch enable/disable SVE/FPU for Realms depending
upon it's state in NS.
When this feature is enabled, traps to EL3 on SVE/FPU access from
Realms are disabled. However, RMM must ensure that the Realm <-> NS
SVE/FPU registers are not corrupted by each other and Realms do
not leak information to NS.
Change-Id: I0a27a055787976507017b72879ba6458f066624e
Signed-off-by: Subhasish Ghosh <subhasish.ghosh@arm.com>
The constants BUNDLE_PERIOD_SCALE and PLL_READY_DLY refer to two
multi-bit registers within the Clock Source Low register. These
constants are used as masks for those registers (and values are not
defined since we are writing zeros to them).
Give them the _MASK suffix.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Id469d0ab4c755d2d6a0150a1ade33dd9d0293667
The register at offset 0x1C3 is called Clock Source Low in functional
specification, but we use constant name GLOB_CLK_SRC_LO. Rename it to
RST_CLK_CTRL instead.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: If7ca460cb166f3828678e1e09c4e6caf5bb77770
The register at offset 0x1C1 is called Reset and Clock Control in
functional specification, but we use constant name GLOB_PHY_CTRL0.
Rename it to RST_CLK_CTRL instead.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I5dac8913bd0686d4f5bd74b91cb7d07ba06df72b
Rename the Lane Status 1 register constants from LANE_STATUS1 to
LANE_STAT1, to use an abbreviation similar to that for Lane
Configuration registers (where we use LANE_CFGx instead of LANE_CONFIGx
or LANE_CONFIGURATIONx).
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Ie329d5a93615efe261802a2f027475b602a5c840
Rename the Miscellaneous Control register constants from MISC_REGx to
MISC_CTRLx.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I4d43bbda44b090de4ecf2d52cfc468f9683cc3b5
According to the functional specification, the register at offset 0x48
is called Idle Sync Enable, not Unit Control or some such.
Rename the constants.
Only bit 12 of this register is defined, all other bits are reserved.
But for some reason the code needs the default value of the other bits,
so we also rename constant UNIT_CTRL_DEFAULT_VALUE to
IDLE_SYNC_EN_DEFAULT_VALUE.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Ia4f80f945a8f31c190cd9a1875d50d892e72825f
Generation Settings registers have the same layout for different
generations and same setting (i.e. Generation 2 Settings 2 register has
the same layout as Generation 3 Settings 2).
So it does not make sense to prefix the constants for Settings 2 with
G3.
Instead change the prefixes to GSx_ for settings register x.
For Settings 2 of Gen 2 and Gen 3 we have some definitions in the first
and some in the second. Move them all to the first defined register (in
this case Gen 2, since the constant for Gen 1 is not defined because it
is not used).
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I15c337eb58aa37fd99fe388fd59373aa325a3a92
Sometimes we call the constants GENx_SET_y, sometimes GENx_SETTINGS_y,
and sometimes GENx_SETTING_y.
Unify this into GENx_SETy.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I3810fb52b2897fe6730ef6e58d434c47cfef14a9
COMPHY register addresses are defined twice
- once for indirect access, where the constants are of the form
COMPHY_<register_name>
- once for direct access, with constants of the form
<register_name>_ADDR
But sometimes the first case also has this _ADDR suffix (and other times
not).
Drop it from those places to unify how we define these registers.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Ibf95be8ade231d0e42258f40614a5f0974d280bd
Some register constants are defined with _REG suffix or REG_ prefix, but
others are not. Unify this by dropping these prefixes / suffixes.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I1ba331c0a4686093ee250bcaf3297349956ac9a8
The COMPHY_RESERVED_REG (offset 0x0E) is currently defined between
COMPHY_KVCO_CAL_CTRL (0x02) and COMPHY_DIG_LOOPBACK_EN (0x23).
But this register does not come from PHY lane register space. The
address 0x0E is not relative to PHY lane registers base address.
It only exists in the indirect register space, before PHY lane 2
registers (which start at address 0x200).
Move its definition in the header and add a comment.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Ie726384b980ace83d8ea327df09d928db74c2ab7
Move the definitions for the Miscellaneous Control 0 register (offset 0x4F),
to leave the registers sorted according to their offsets.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I9864be5bd00181d21c9334219be4f89c4f032c8b
The register name for the value PHY_GEN_USB3_5G is PHY_GEN_MAX. We
already define the mask constant as PHY_GEN_MAX_MASK. Thus also the
value name should be prefixed with PHY_GEN_MAX_.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Ibf72a66d2e65e240ed2cdbc3a301dbd793e2cb34
The register at offset 0x23 is called Digital Loopback Enable, but the
constant is COMPHY_LOOPBACK_REG0, as if there were some LOOPBACK_REG1
register or something, which there is not.
Rename the constant to COMPHY_DIG_LOOPBACK_EN.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Ie88bdd864e2c9ab7e8de70ed7f3a13ee8f08ff79