Rule 8.4: A compatible declaration shall be visible when
an object or function with external linkage is defined
Fixed for:
make DEBUG=1 PLAT=fvp LOG_LEVEL=50 all
Change-Id: I7c2ad3f5c015411c202605851240d5347e4cc8c7
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Rule 8.4: A compatible declaration shall be visible when
an object or function with external linkage is defined.
Change-Id: I26e042cb251a6f9590afa1340fdac73e42f23979
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Rule 8.3: All declarations of an object or function shall
use the same names and type qualifiers.
Change-Id: Iff384187c74a598a4e73f350a1893b60e9d16cec
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
MISRA C-2012 Rule 7.3 violation: lowercase l shall not be used as literal suffixes.
This patch resolves this for the ULL() macro by using ULL suffix instead
of the ull suffix.
Change-Id: Ia8183c399e74677e676956e8653e82375d0e0a01
Signed-off-by: David Cunado <david.cunado@arm.com>
During the warm boot sequence:
1. The MMU is enabled with the data cache disabled. The MMU table walker
is set up to access the translation tables as in cacheable memory,
but its accesses are non-cacheable because SCTLR_EL3.C controls them
as well.
2. The interconnect is set up and the CPU enters coherency with the
rest of the system.
3. The data cache is enabled.
If the support for dynamic translation tables is enabled and another CPU
makes changes to a region, the changes may only be present in the data
cache, not in RAM. The CPU that is booting isn't in coherency with the
rest of the system, so the table walker of that CPU isn't either. This
means that it may read old entries from RAM and it may have invalid TLB
entries corresponding to the dynamic mappings.
This is not a problem for the boot code because the mapping is 1:1 and
the regions are static. However, the code that runs after the boot
sequence may need to access the dynamically mapped regions.
This patch invalidates all TLBs during warm boot when the dynamic
translation tables support is enabled to prevent this problem.
Change-Id: I80264802dc0aa1cb3edd77d0b66b91db6961af3d
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This patch also fixes the assumption that the counters are disabled on
the resume path. This is incorrect as the AMU counters are enabled
early in the CPU reset function before `cpuamu_context_restore()`
runs.
Change-Id: I38a94eb166a523f00de18e86860434ffccff2131
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
This patch also fixes `cpuamu_write_cpuamcntenclr_el0()` to use an MSR
instruction instead of an MRS instruction.
Change-Id: Ia6531f64b5ebc60ba432124eaa8d8eaccba40ed0
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
AArch32 uses odd-even pairs when passing 64-bit arguments to
functions. For example in `amu_group0_cnt_write_internal()` the
second argument is a uint64_t which is passed in r2 and r3.
In `amu_group1_set_evtype_internal()` the value that needs to be
written to the system register is in r1 not in r0.
Change-Id: I20196268fdb1dc9ef6c4ebe61e761fba9623b3f2
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
Before suspend the AMU counters should be enabled and after resume
they should be disabled. Assert that to be consistent with the
AArch64 implementation of `amu_context_{save,restore}()`.
Change-Id: Ia46f77e4062b93afb93721a2890a9b9d2a7f300e
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
Implement helpers to test if the core supports SPE/SVE. We have a
similar helper for AMU and this patch makes all extensions consistent
in their implementation.
Change-Id: I3e6f7522535ca358259ad142550b19fcb883ca67
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
The AArch32 assembly implementation of `print_errata_status` did not save
a register which was getting clobbered by a `get_cpu_ops_ptr`. This
patch fixes that.
Change-Id: Id0711e46b7c685a18a10328d4b513e952a5d860b
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
When enabling VERBOSE() traces, the zlib library fails to compile
because of an incompatible format specifier string. Fix that.
Change-Id: I74ff1c8dc2e6157ee982f7754bce4504599e3013
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Currently optee header info is only printed after it is validated,
but this does not help with debugging in case of error, so print it
before.
Signed-off-by: Victor Chong <victor.chong@linaro.org>
AArch32 only platforms can boot the OP-TEE secure firmware as
a BL32 secure payload. Such configuration can be defined through
AARCH32_SP=optee.
The source files can rely on AARCH32_SP_OPTEE to condition
OP-TEE boot specific instruction sequences.
OP-TEE does not expect ARM Trusted Firmware formatted structure
as boot argument. Load sequence is expected to have already loaded
to OP-TEE boot arguments into the bl32 entrypoint info structure.
Last, AArch32 platform can only boot AArch32 OP-TEE images.
Change-Id: Ic28eec5004315fc9111051add6bb1a1d607fc815
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
This commit adds some more files to use zlib from TF.
To use zlib, ->zalloc and ->zfree hooks are needed. The implementation
depends on the system. For user-space, the libc provides malloc() and
friends. Unfortunately, ARM Trusted Firmware does not provide malloc()
or any concept of dynamic memory allocation.
I implemented very simple calloc() and free() for this. Stupidly,
zfree() never frees memory, but it works enough for this.
The purpose of using zlib is to implement gunzip() - this function
takes compressed data from in_buf, then dumps the decompressed data
to oub_buf. The work_buf is used for memory allocation during the
decompress. Upon exit, it updates in_buf and out_buf. If successful,
in_buf points to the end of input data, out_buf to the end of the
decompressed data.
To use this feature, you need to do:
- include lib/zlib/zlib.mk from your platform.mk
- add $(ZLIB_SOURCES) to your BL*_SOURCES
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Import the following files from zlib 1.2.11:
adler32.c
crc32.c
crc32.h
inffast.c
inffast.h
inffixed.h
inflate.c
inflate.h
inftrees.c
inftrees.h
zconf.h
zlib.h
zutil.c
zutil.h
The original tarball is available from http://zlib.net/
The zlib is free software, distributed under the zlib license. The
license text is included in the "zlib.h" file. It should be compatible
with BSD-3-Clause.
The zlib license is included in the SPDX license list available at
https://spdx.org/licenses/, but I did not add the SPDX license tag to
the imported files above, to keep them as they are in the upstream
project. This seems the general policy for ARM Trusted Firmware, as
SPDX License Identifier was not added to files imported from FreeBSD.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The assertion in zero_normalmem() fails for BL2_AT_EL3. This mode is
executed in EL3, so it should check sctlr_el3 instead of sctlr_el1.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add amu_context_save() and amu_context_restore() functions for aarch32
Change-Id: I4df83d447adeaa9d9f203e16dc5a919ffc04d87a
Signed-off-by: Joel Hutton <joel.hutton@arm.com>
This patch implements a fast path for this SMC call on affected PEs by
detecting and returning immediately after executing the workaround.
NOTE: The MMU disable/enable workaround now assumes that the MMU was
enabled on entry to EL3. This is a valid assumption as the code turns
on the MMU after reset and leaves it on until the core powers off.
Change-Id: I13c336d06a52297620a9760fb2461b4d606a30b3
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
In the initial implementation of this workaround we used a dedicated
workaround context to save/restore state. This patch reduces the
footprint as no additional context is needed.
Additionally, this patch reduces the memory loads and stores by 20%,
reduces the instruction count and exploits static branch prediction to
optimize the SMC path.
Change-Id: Ia9f6bf06fbf8a9037cfe7f1f1fb32e8aec38ec7d
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
On some platforms it may be necessary to discover the SMCCC version
via a PSCI features call.
Change-Id: I95281ac2263ca9aefda1809eb03464fbdb8ac24d
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
coreboot supports an in-memory console to store firmware logs even when
no serial console is available. It is widely supported by
coreboot-compatible bootloaders (including SeaBIOS and GRUB) and can be
read by the Linux kernel.
This patch allows BL31 to add its own log messages to this console. The
driver will be registered automatically if coreboot support is compiled
in and detects the presence of a console buffer in the coreboot tables.
Change-Id: I31254dfa0c2fdeb7454634134b5707b4b4154907
Signed-off-by: Julius Werner <jwerner@chromium.org>
This patch adds the foundation for a platform-independent coreboot
support library that can be shared by all platforms that boot BL31 from
coreboot (acting as BL2). It adds code to parse the "coreboot table", a
data structure that coreboot uses to communicate different kinds of
information to later-stage firmware and certain OS drivers.
As a first small use case for this information, allow platforms to
access the serial console configuration used by coreboot, removing the
need to hardcode base address and divisors and allowing Trusted Firmware
to benefit from coreboot's user configuration (e.g. which UART to pick
and which baud rate to use).
Change-Id: I2bfb39cd2609ce6640b844ab68df6c9ae3f28e9e
Signed-off-by: Julius Werner <jwerner@chromium.org>
In AARCH32 mode, cortex_a72_reset_func branches to address in lr
register instead of r5 register. This leads to linux boot failure
of Cortex-A72 cores in AARCH32 mode on Juno-R2 board.
This patch fixes the branching of cortex_a72_reset_func to r5
register as in cortex_a57_reset_func implementation.
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
A per-cpu vbar is installed that implements the workaround by
invalidating the branch target buffer (BTB) directly in the case of A9
and A17 and indirectly by invalidating the icache in the case of A15.
For Cortex A57 and A72 there is currently no workaround implemented
when EL3 is in AArch32 mode so report it as missing.
For other vulnerable CPUs (e.g. Cortex A73 and Cortex A75), there are
no changes since there is currently no upstream AArch32 EL3 support
for these CPUs.
Change-Id: Ib42c6ef0b3c9ff2878a9e53839de497ff736258f
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
Even though the workaround for CVE-2017-5715 is not a CPU erratum, the
code is piggybacking on the errata framework to print whether the
workaround was applied, missing or not needed.
Change-Id: I821197a4b8560c73fd894cd7cd9ecf9503c72fa3
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
As we are using the errata framework to handle workarounds in a more
general sense, change the default string to reflect that.
Change-Id: I2e266af2392c9d95e18fe4e965f9a1d46fd0e95e
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
This patch enables BL2 to execute at the highest exception level
without any dependancy on TF BL1. This enables platforms which already
have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL
stages without need for BL1. This is not currently possible because
BL2 executes at S-EL1 and cannot jump straight to EL3.
Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
If AMU is not supported by the hardware but it is enabled in Trusted
Firmware, the console will be spammed with warnings every time a CPU
is brought up with a CPU ON call.
Remove the warning message as this is more in line with how other
extensions like SPE and SVE are handled.
Change-Id: Iba6d367e4d1375ab554d23d2eaceab3ae1362c5a
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
On some systems, the AMU counters might reset to 0 when a CPU
powerdown happens. This behaviour conflicts with the intended
use-case of AMU as lower ELs are only expected to see non-decreasing
counter values.
Change-Id: If25519965d4e6e47e09225d0e732947986cbb5ec
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
Add some AMU helper functions to allow configuring, reading and
writing of the Group 0 and Group 1 counters. Documentation for these
helpers will come in a separate patch.
Change-Id: I656e070d2dae830c22414f694aa655341d4e2c40
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
A new platform macro `PLAT_AMU_GROUP1_COUNTERS_MASK` controls which
group 1 counters should be enabled. The maximum number of group 1
counters supported by AMUv1 is 16 so the mask can be at most 0xffff.
If the platform does not define this mask, no group 1 counters are
enabled.
A related platform macro `PLAT_AMU_GROUP1_NR_COUNTERS` is used by
generic code to allocate an array to save and restore the counters on
CPU suspend.
Change-Id: I6d135badf4846292de931a43bb563077f42bb47b
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
The suspend hook is published at the start of a CPU powerdown
operation. The resume hook is published at the end of a CPU powerup
operation.
Change-Id: I50c05e2dde0d33834095ac41b4fcea4c161bb434
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
If the CSV2 field reads as 1 then branch targets trained in one
context cannot affect speculative execution in a different context.
In that case skip the workaround on Cortex A75.
Change-Id: I4d5504cba516a67311fb5f0657b08f72909cbd38
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
Invalidate the Branch Target Buffer (BTB) on entry to EL3 by
temporarily dropping into AArch32 Secure-EL1 and executing the
`BPIALL` instruction.
This is achieved by using 3 vector tables. There is the runtime
vector table which is used to handle exceptions and 2 additional
tables which are required to implement this workaround. The
additional tables are `vbar0` and `vbar1`.
The sequence of events for handling a single exception is
as follows:
1) Install vector table `vbar0` which saves the CPU context on entry
to EL3 and sets up the Secure-EL1 context to execute in AArch32 mode
with the MMU disabled and I$ enabled. This is the default vector table.
2) Before doing an ERET into Secure-EL1, switch vbar to point to
another vector table `vbar1`. This is required to restore EL3 state
when returning from the workaround, before proceeding with normal EL3
exception handling.
3) While in Secure-EL1, the `BPIALL` instruction is executed and an
SMC call back to EL3 is performed.
4) On entry to EL3 from Secure-EL1, the saved context from step 1) is
restored. The vbar is switched to point to `vbar0` in preparation to
handle further exceptions. Finally a branch to the runtime vector
table entry is taken to complete the handling of the original
exception.
This workaround is enabled by default on the affected CPUs.
NOTE
====
There are 4 different stubs in Secure-EL1. Each stub corresponds to
an exception type such as Sync/IRQ/FIQ/SError. Each stub will move a
different value in `R0` before doing an SMC call back into EL3.
Without this piece of information it would not be possible to know
what the original exception type was as we cannot use `ESR_EL3` to
distinguish between IRQs and FIQs.
Change-Id: I90b32d14a3735290b48685d43c70c99daaa4b434
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
Invalidate the Branch Target Buffer (BTB) on entry to EL3 by disabling
and enabling the MMU. To achieve this without performing any branch
instruction, a per-cpu vbar is installed which executes the workaround
and then branches off to the corresponding vector entry in the main
vector table. A side effect of this change is that the main vbar is
configured before any reset handling. This is to allow the per-cpu
reset function to override the vbar setting.
This workaround is enabled by default on the affected CPUs.
Change-Id: I97788d38463a5840a410e3cea85ed297a1678265
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
`mm_cursor` doesn't have the needed data because the `memmove()` that
is called right before it overwrites that information. In order to get
the information of the region that was being mapped, `mm` has to be used
instead (like it is done to fill the fields of `unmap_mm`).
If the incorrect information is read, this check isn't reliable and
`xlat_tables_unmap_region` may be requested to unmap memory that isn't
mapped at all, triggering assertions.
Change-Id: I602d4ac83095d4e5dac9deb34aa5d00d00e6c289
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This patch adds a new build option, ENABLE_SVE_FOR_NS, which when set
to one EL3 will check to see if the Scalable Vector Extension (SVE) is
implemented when entering and exiting the Non-secure world.
If SVE is implemented, EL3 will do the following:
- Entry to Non-secure world: SIMD, FP and SVE functionality is enabled.
- Exit from Non-secure world: SIMD, FP and SVE functionality is
disabled. As SIMD and FP registers are part of the SVE Z-registers
then any use of SIMD / FP functionality would corrupt the SVE
registers.
The build option default is 1. The SVE functionality is only supported
on AArch64 and so the build option is set to zero when the target
archiecture is AArch32.
This build option is not compatible with the CTX_INCLUDE_FPREGS - an
assert will be raised on platforms where SVE is implemented and both
ENABLE_SVE_FOR_NS and CTX_INCLUDE_FPREGS are set to 1.
Also note this change prevents secure world use of FP&SIMD registers on
SVE-enabled platforms. Existing Secure-EL1 Payloads will not work on
such platforms unless ENABLE_SVE_FOR_NS is set to 0.
Additionally, on the first entry into the Non-secure world the SVE
functionality is enabled and the SVE Z-register length is set to the
maximum size allowed by the architecture. This includes the use case
where EL2 is implemented but not used.
Change-Id: Ie2d733ddaba0b9bef1d7c9765503155188fe7dae
Signed-off-by: David Cunado <david.cunado@arm.com>
The `ENABLE_AMU` build option can be used to enable the
architecturally defined AMU counters. At present, there is no support
for the auxiliary counter group.
Change-Id: Ifc7532ef836f83e629f2a146739ab61e75c4abc8
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
The `ENABLE_AMU` build option can be used to enable the
architecturally defined AMU counters. At present, there is no support
for the auxiliary counter group.
Change-Id: I7ea0c0a00327f463199d1b0a481f01dadb09d312
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
The Cortex A75 has 5 AMU counters. The first three counters are fixed
and the remaining two are programmable.
A new build option is introduced, `ENABLE_AMU`. When set, the fixed
counters will be enabled for use by lower ELs. The programmable
counters are currently disabled.
Change-Id: I4bd5208799bb9ed7d2596e8b0bfc87abbbe18740
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
This patch replaces the macro ASM_ASSERTION with the macro
ENABLE_ASSERTIONS in ARM Cortex-A53/57/72 MPCore Processor
related files. There is build error when ASM_ASSERTION is set
to 1 and ENABLE_ASSERTIONS is set to 0 because function
asm_assert in common/aarch32/debug.S is defined in the macro
ENABLE_ASSERTIONS but is called with the macro ASM_ASSERTION.
There is also the indication to use ENABLE_ASSERTIONS but not
ASM_ASSERTION in the Makefile.
Signed-off-by: Matt Ma <matt.ma@spreadtrum.com>
There is an edge case where the cache maintaince done in
psci_do_cpu_off may not seen by some cores. This case is handled in
psci_cpu_on_start but it hasn't handled in psci_affinity_info.
Change-Id: I4d64f3d1ca9528e364aea8d04e2d254f201e1702
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Factor out SPE operations in a separate file. Use the publish
subscribe framework to drain the SPE buffers before entering secure
world. Additionally, enable SPE before entering normal world.
A side effect of this change is that the profiling buffers are now
only drained when a transition from normal world to secure world
happens. Previously they were drained also on return from secure
world, which is unnecessary as SPE is not supported in S-EL1.
Change-Id: I17582c689b4b525770dbb6db098b3a0b5777b70a
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
Factor out extension enabling to a separate function that is called
before exiting from EL3 for first entry into Non-secure world.
Change-Id: Ic21401ebba531134d08643c0a1ca9de0fc590a1b
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
If an implementation of ARMv8.2 includes ARMv8.2-LPA, the value 0b0110
is permitted in ID_AA64MMFR0_EL1.PARange, which means that the Physical
Address range supported is 52 bits (4 PiB). It is a reserved value
otherwise.
Change-Id: Ie0147218e9650aa09f0034a9ee03c1cca8db908a
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The FPEXC32_EL2 register controls SIMD and FP functionality when the
lower ELs are executing in AArch32 mode. It is architecturally mapped
to AArch32 system register FPEXC.
This patch removes FPEXC32_EL2 register from the System Register context
and adds it to the floating-point context. EL3 only saves / restores the
floating-point context if the build option CTX_INCLUDE_FPREGS is set to 1.
The rationale for this change is that if the Secure world is using FP
functionality and EL3 is not managing the FP context, then the Secure
world will save / restore the appropriate FP registers.
NOTE - this is a break in behaviour in the unlikely case that
CTX_INCLUDE_FPREGS is set to 0 and the platform contains an AArch32
Secure Payload that modifies FPEXC, but does not save and restore
this register
Change-Id: Iab80abcbfe302752d52b323b4abcc334b585c184
Signed-off-by: David Cunado <david.cunado@arm.com>
This function can be useful to setup TCR_ELx by callers that don't use
the translation tables library to setup the system registers related
to them. By making it common, it can be reused whenever it is needed
without duplicating code.
Change-Id: Ibfada9e846d2a6cd113b1925ac911bb27327d375
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
ARMv7-A architectures that do not support the Virtualization extensions
do not support instructions for the 32bit division. This change provides
a software implementation for 32bit division.
The division implementation is dumped from the OP-TEE project
http://github.com/OP-TEE/optee_os. The code was slightly modified
to pass trusted firmware checkpatch requirements and copyright is
given to the ARM trusted firmware initiative and its contributors.
Change-Id: Idae0c7b80a0d75eac9bd41ae121921d4c5af3fa3
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
If ARMv7 based platform does not set ARM_CORTEX_Ax=yes, platform
shall define ARMV7_SUPPORTS_GENERIC_TIMER to enable generic timer
support.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
ARCH_SUPPORTS_LARGE_PAGE_ADDRESSING allows build environment to
handle specific case when target ARMv7 core only supports 32bit MMU
descriptor mode.
If ARMv7 based platform does not set ARM_CORTEX_Ax=yes, platform
shall define ARMV7_SUPPORTS_LARGE_PAGE_ADDRESSING to enable
large page addressing support.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
As Cortex-A9 needs to manually enable program flow prediction,
do not reset SCTLR[Z] at entry. Platform should enable it only
once MMU is enabled.
Change-Id: I34e1ee2da73221903f7767f23bc6fc10ad01e3de
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
This patch includes various fixes for PSCI STAT functionality
relating to timestamp collection:
1. The PSCI stat accounting for retention states for higher level
power domains were done outside the locks which could lead to
spurious values in some race conditions. This is moved inside
the locks. Also, the call to start the stat accounting was redundant
which is now removed.
2. The timestamp wrap-around case when calculating residency did
not cater for AArch32. This is now fixed.
3. In the warm boot path, `plat_psci_stat_accounting_stop()` was
getting invoked prior to population of target power states. This
is now corrected.
Change-Id: I851526455304fb74ff0a724f4d5318cd89e19589
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Add events that trigger before entry to normal/secure world. The
events trigger after the normal/secure context has been restored.
Similarly add events that trigger after leaving normal/secure world.
The events trigger after the normal/secure context has been saved.
Change-Id: I1b48a7ea005d56b1f25e2b5313d77e67d2f02bc5
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
This allows other EL3 components to subscribe to CPU on events.
Update Firmware Design guide to list psci_cpu_on_finish as an available
event.
Change-Id: Ida774afe0f9cdce4021933fcc33a9527ba7aaae2
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
The implementation is the same as those used to disable it in EL3.
Change-Id: Ibfe7e69034a691fbf57477c5a76a8cdca28f6b26
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This patch introduces a new API in the translation tables library
(v2), that allows to change the memory attributes of a memory
region. It may be used to change its execution permissions and
data access permissions.
As a prerequisite, the memory must be already mapped. Moreover, it
must be mapped at the finest granularity (currently 4 KB).
Change-Id: I242a8c6f0f3ef2b0a81a61e28706540462faca3c
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This patch introduces a new API in the translation tables library
(v2), that allows to query the memory attributes of a memory block
or a memory page.
Change-Id: I45a8b39a53da39e7617cbac4bff5658dc1b20a11
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
With this patch the PSCI_FEATURES API correctly reports availability
of the PSCI_MEM_PROTECT_CHECK API - PSCI_MEM_CHK_RANGE_AARCH64 is
added to the PSCI capabilities mask, PSCI_CAP_64BIT_MASK
Change-Id: Ic90ee804deaadf0f948dc2d46ac5fe4121ef77ae
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Currently TF does not initialise the PMCR_EL0 register in
the secure context or save/restore the register.
In particular, the DP field may not be set to one to prohibit
cycle counting in the secure state, even though event counting
generally is prohibited via the default setting of MDCR_EL3.SMPE
to 0.
This patch initialises PMCR_EL0.DP to one in the secure state
to prohibit cycle counting and also initialises other fields
that have an architectually UNKNOWN reset value.
Additionally, PMCR_EL0 is added to the list of registers that are
saved and restored during a world switch.
Similar changes are made for PMCR for the AArch32 execution state.
NOTE: secure world code at lower ELs that assume other values in PMCR_EL0
will be impacted.
Change-Id: Iae40e8c0a196d74053accf97063ebc257b4d2f3a
Signed-off-by: David Cunado <david.cunado@arm.com>
This patch implements PSCI_SYSTEM_RESET2 API as defined in PSCI
v1.1 specification. The specification allows architectural and
vendor-specific resets via this API. In the current specification,
there is only one architectural reset, the warm reset. This reset is
intended to provide a fast reboot path that guarantees not to reset
system main memory.
Change-Id: I057bb81a60cd0fe56465dbb5791d8e1cca025bd3
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
This patch introduces the ability of the xlat tables library to manage
EL0 and EL1 mappings from a higher exception level.
Attributes MT_USER and MT_PRIVILEGED have been added to allow the user
specify the target EL in the translation regime EL1&0.
REGISTER_XLAT_CONTEXT2 macro is introduced to allow creating a
xlat_ctx_t that targets a given translation regime (EL1&0 or EL3).
A new member is added to xlat_ctx_t to represent the translation regime
the xlat_ctx_t manages. The execute_never mask member is removed as it
is computed from existing information.
Change-Id: I95e14abc3371d7a6d6a358cc54c688aa9975c110
Co-authored-by: Douglas Raillard <douglas.raillard@arm.com>
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Introduce a variant of the TLB invalidation helper function that
allows the targeted translation regime to be specified, rather than
defaulting to the current one.
This new function is useful in the context of EL3 software managing
translation tables for the S-EL1&0 translation regime, as then it
might need to invalidate S-EL1&0 TLB entries rather than EL3 ones.
Define a new enumeration to be able to represent translation regimes in
the xlat tables library.
Change-Id: Ibe4438dbea2d7a6e7470bfb68ff805d8bf6b07e5
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Co-authored-by: Douglas Raillard <douglas.raillard@arm.com>
Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
TLB invalidation functions used to be conditionally compiled in.
They were enabled only when using the dynamic mapping feature.
because only then would we need to modify page tables on the fly.
Actually there are other use cases where invalidating TLBs is required.
When changing memory attributes in existing translation descriptors for
example. These other use cases do not necessarily depend on the dynamic
mapping feature.
This patch removes this dependency and always compile TLB invalidation
functions in. If they're not used, they will be removed from the binary
at link-time anyway so there's no consequence on the memory footprint
if these functions are not called.
Change-Id: I1c33764ae900eb00073ee23b7d0d53d4efa4dd21
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
The current implementation of the memory mapping API favours mapping
memory regions using the biggest possible block size in order to
reduce the number of translation tables needed.
In some cases, this behaviour might not be desirable. When translation
tables are edited at run-time, coarse-grain mappings like that might
need splitting into finer-grain tables. This operation has a
performance cost.
The MAP_REGION2() macro allows to specify the granularity of
translation tables used for the initial mapping of a memory region.
This might increase performance for memory regions that are likely to
be edited in the future, at the expense of a potentially increased
memory footprint.
The Translation Tables Library Design Guide has been updated to
explain the use case for this macro. Also added a few intermediate
titles to make the guide easier to digest.
Change-Id: I04de9302e0ee3d326b8877043a9f638766b81b7b
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This commit introduces a new type (mem_region_t) used to describe
memory regions and it adds two utility functions:
- clear_mem_regions: This function clears (write 0) to a set
of regions described with an array of mem_region_t.
- mem_region_in_array_chk This function checks if a
region is covered by some of the regions described
with an array of mem_region_t.
Change-Id: I12ce549f5e81dd15ac0981645f6e08ee7c120811
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
This patch adds the generic code that links the psci smc handler
with the platform function that implements the mem_protect and
mem_check_range functionalities. These functions are optional
APIs added in PSCI v1.1 (ARM DEN022D).
Change-Id: I3bac1307a5ce2c7a196ace76db8317e8d8c8bb3f
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
In the S-EL1&0 translation regime we aren't using the higher VA range,
whose translation table base address is held in TTBR1_EL1. The bit
TCR_EL1.EPD1 can be used to disable translations using TTBR1_EL1, but
the code wasn't setting it to 1. Additionally, other fields in TCR1_EL1
associated with the higher VA range (TBI1, TG1, SH1, ORGN1, IRGN1 and
A1) weren't set correctly as they were left as 0. In particular, 0 is a
reserved value for TG1. Also, TBBR1_EL1 was not explicitly set and its
reset value is UNKNOWN.
Therefore memory accesses to the higher VA range would result in
unpredictable behaviour as a translation table walk would be attempted
using an UNKNOWN value in TTBR1_EL1.
On the FVP and Juno platforms accessing the higher VA range resulted in
a translation fault, but this may not always be the case on all
platforms.
This patch sets the bit TCR_EL1.EPD1 to 1 so that any kind of
unpredictable behaviour is prevented.
This bug only affects the AArch64 version of the code, the AArch32
version sets this bit to 1 as expected.
Change-Id: I481c000deda5bc33a475631301767b9e0474a303
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Use a mmap_region_t as parameter instead of getting a parameter for each
structure member. This reduces the scope of changes when adding members
to mmap_region_t.
Also align on the convention of using mm_cursor as a variable name for
the currently inspected region when iterating on the region array.
Change-Id: If40bc4351b56c64b214e60dda27276d11ce9dbb3
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
mmap_add_region_ctx and mmap_add_dynamic_region_ctx are clearing members
that they are not aware of by copying each member one by one. Replace
this by structure assignment.
Change-Id: I7c70cb408c8a8eb551402a5d8d956c1fb7f32b55
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Use the MAP_REGION to build the mmap_region_t argument in wrappers like
mmap_add_region(). Evolution of the mmap_region_t might require adding
new members with a non-zero default value. Users of MAP_REGION are
protected against such evolution. This commit also protects users of
mmap_add_region() and mmap_add_dynamic_region() functions against these
evolutions.
Also make the MAP_REGION macro implementation more explicit and make it
a mmap_region_t compound literal to make it useable as a function
parameter on its own and to prevent using it in initialization of
variables of different type.
Change-Id: I7bfc4689f6dd4dd23c895b65f628d8ee991fc161
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Erratum 855971 applies to revision r0p3 or earlier Cortex-A72 CPUs. The
recommended workaround is to disable instruction prefetch.
Change-Id: I7fde74ee2a8a23b2a8a1891b260f0eb909fad4bf
Signed-off-by: Eleanor Bonnici <Eleanor.bonnici@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Erratum 855972 applies to revision r1p3 or earlier Cortex-A57 CPUs. The
recommended workaround is to disable instruction prefetch.
Change-Id: I56eeac0b753eb1432bd940083372ad6f7e93b16a
Signed-off-by: Eleanor Bonnici <Eleanor.bonnici@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
psci_set_power_off_state only initializes a local variable, so there
isn't any reason why it should be done while the lock is held.
Change-Id: I1c62f4cd5d860d102532e5a5350152180d41d127
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
Platform may use specific cache line sizes. Since CACHE_WRITEBACK_GRANULE
defines the platform specific cache line size, it is used to define the
size of the cpu data structure CPU_DATA_SIZE aligned on cache line size.
Introduce assembly macro 'mov_imm' for AArch32 to simplify implementation
of function '_cpu_data_by_index'.
Change-Id: Ic2d49ffe0c3e51649425fd9c8c99559c582ac5a1
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
At present, various CPU register macros that refer to CPUACTLR are named
ACTLR. This patch fixes that.
The previous register names are retained, but guarded by the
ERROR_DEPRECATED macro, so as not to break platforms that continue using
the old names.
Change-Id: Ia872196d81803f8f390b887d149e0fd054df519b
Signed-off-by: Eleanor Bonnici <Eleanor.bonnici@arm.com>
This patch enables the CnP (Common not Private) bit for secure page
tables so that multiple PEs in the same Inner Shareable domain can use
the same translation table entries for a given stage of translation in
a particular translation regime. This only takes effect when ARM
Trusted Firmware is built with ARM_ARCH_MINOR >= 2.
ARM Trusted Firmware Design has been updated to include a description
of this feature usage.
Change-Id: I698305f047400119aa1900d34c65368022e410b8
Signed-off-by: Isla Mitchell <isla.mitchell@arm.com>
The macro concisely expresses and requires architecture version to be at
least as required by its arguments. This would be useful when extending
Trusted Firmware functionality for future architecture revisions.
Replace similar usage in the current code base with the new macro.
Change-Id: I9dcd0aa71a663eabd02ed9632b8ce87611fa5a57
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Previously commit 555ebb34db8f3424c1b394df2f10ecf9c1f70901 attmpted to fix this
GCC issue:
services/std_svc/psci/psci_common.c: In function 'psci_do_state_coordination':
services/std_svc/psci/psci_common.c:220:27: error: array subscript is above
array bounds [-Werror=array-bounds]
psci_req_local_pwr_states[pwrlvl - 1][cpu_idx] = req_pwr_state;
This fix doesn't work as asserts aren't built in non-debug build flows.
Let's use GCCs #pragma option (documented here:
https://gcc.gnu.org/onlinedocs/gcc/Diagnostic-Pragmas.html) to avoid
this false positive instead.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
which will cause write_sctlr_el2 use all sctlr_el1 value except the EE bit
The code doesn't "Use SCTLR_EL1.EE value to initialise sctlr_el2"
but, read out SCTLR_EL1 and clear EE bit, then set to sctlr_el2
Signed-off-by: Ken Kuang <ken.kuang@spreadtrum.com>
Trusted OS may have extra images to be loaded. Load them one by one
and do the parsing. In this patch, ARM TF need to load up to 3 images
for optee os: header, pager and paged images. Header image is the info
about optee os and images. Pager image include pager code and data.
Paged image include the paging parts using virtual memory.
Change-Id: Ia3bcfa6d8a3ed7850deb5729654daca7b00be394
Signed-off-by: Summer Qin <summer.qin@arm.com>
This patch changes the sign of the loop variable used in
xlat_tables_print(). It needs to be unsigned because it is compared
against another unsigned int.
Change-Id: I2b3cee7990dd75e8ebd2701de3860ead7cad8dc8
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
This patch adds an early suspend handler, that executes with
SMP and data cache enabled. This handler allows platforms to
perform any early actions during the CPU suspend entry sequence.
This handler is optional and platforms can choose to implement it
depending on their needs. The `pwr_domain_suspend` handler still
exists and platforms can keep on using it without any side effects.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
There is a theoretical edge case during CPU_ON where the cache
may contain stale data for the target CPU data - this can occur
under the following conditions:
- the target CPU is in another cluster from the current
- the target CPU was the last CPU to shutdown on its cluster
- the cluster was removed from coherency as part of the CPU shutdown
In this case the cache maintenace that was performed as part of the
target CPUs shutdown was not seen by the current CPU's cluster. And
so the cache may contain stale data for the target CPU.
This patch adds a cache maintenance operation (flush) for the
cache-line containing the target CPU data - this ensures that the
target CPU data is read from main memory.
Change-Id: If8cfd42639b03174f60669429b7f7a757027d0fb
Signed-off-by: David Cunado <david.cunado@arm.com>
Fix the type length and signedness of some of the constants and
variables used in the translation table library.
This patch supersedes Pull Request #1018:
https://github.com/ARM-software/arm-trusted-firmware/pull/1018
Change-Id: Ibd45faf7a4fb428a0bf71c752551d35800212fb2
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
When using __builtin_ctzll() in AArch32 code, the compiler may translate
that into a call to the __ctzdi2() function. In this case, the linking
phase fails because TF doesn't provide an implementation for it.
This patch imports the implementation of the __ctzdi2() function from
LLVM's compiler-rt project and hooks it into TF's build system. The
ctzdi2.c file is an unmodified copy from the master branch as of
July 19 2017 (SVN revision: 308480).
Change-Id: I96766a025ba28e1afc6ef6a5c4ef91d85fc8f32b
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Previous patches have made it possible to specify the physical and
virtual address spaces sizes for each translation context. However,
there are still some places in the code where the physical (resp.
virtual) address space size is assumed to be PLAT_PHY_ADDR_SPACE_SIZE
(resp. PLAT_VIRT_ADDR_SPACE_SIZE).
This patch removes them and reads the relevant address space size
from the translation context itself instead. This information is now
passed in argument to the enable_mmu_arch() function, which needs it
to configure the TCR_ELx.T0SZ field (in AArch64) or the TTBCR.T0SZ
field (in AArch32) appropriately.
Change-Id: I20b0e68b03a143e998695d42911d9954328a06aa
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
This patch refactors both the AArch32 and AArch64 versions of the
function enable_mmu_arch().
In both versions, the code now computes the VMSA-related system
registers upfront then program them in one go (rather than interleaving
the 2).
In the AArch64 version, this allows to reduce the amount of code
generated by the C preprocessor and limits it to the actual differences
between EL1 and EL3.
In the AArch32 version, this patch also removes the function
enable_mmu_internal_secure() and moves its code directly inside
enable_mmu_arch(), as it was its only caller.
Change-Id: I35c09b6db4404916cbb2e2fd3fda2ad59f935954
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
In both the AArch32 and AArch64 versions, this function used to check
the sanity of the PLAT_PHY_ADDR_SPACE_SIZE in regard to the
architectural maximum value. Instead, export the
xlat_arch_get_max_supported_pa() function and move the debug
assertion in AArch-agnostic code.
The AArch64 used to also precalculate the TCR.PS field value, based
on the size of the physical address space. This is now done directly
by enable_mmu_arch(), which now receives the physical address space size
in argument.
Change-Id: Ie77ea92eb06db586f28784fdb479c6e27dd1acc1
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
In a previous patch, the xlat_ctx_t type has been made public.
This patch now makes the *_ctx() APIs public.
Each API now has a *_ctx() variant. Most of them were already implemented
and this patch just makes them public. However, some of them were missing
so this patch introduces them.
Now that all these APIs are public, there's no good reason for splitting
them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c).
Therefore, this patch moves all code into xlat_tables_internal.c and
removes xlat_tables_common.c. It removes it from the library's makefile
as well.
This last change introduces a compatibility break for platform ports
that specifically include the xlat_tables_common.c file instead of
including the library's Makefile. The UniPhier platform makefile has
been updated to now omit this file from the list of source files.
The prototype of mmap_add_region_ctx() has been slightly changed. The
mmap_region_t passed in argument needs to be constant because it gets
called from map_add(), which receives a constant region. The former
implementation of mmap_add() used to cast the const qualifier away,
which is not a good practice.
Also remove init_xlation_table(), which was a sub-function of
init_xlat_tables(). Now there's just init_xlat_tables() (and
init_xlat_tables_ctx()). Both names were too similar, which was
confusing. Besides, now that all the code is in a single file,
it's no longer needed to have 2 functions for that.
Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
At the moment, the translation context type (xlat_ctx_t) is a private
type reserved for the internal usage of the translation table library.
All exported APIs (implemented in xlat_tables_common.c) are wrappers
over the internal implementations that use such a translation context.
These wrappers unconditionally pass the current translation context
representing the memory mappings of the executing BL image. This means
that the caller has no control over which translation context the
library functions act on.
As a first step to make this code more flexible, this patch exports
the 'xlat_ctx_t' type. Note that, although the declaration of this type
is now public, its definition stays private. A macro is introduced to
statically allocate and initialize such a translation context.
The library now internally uses this macro to allocate the default
translation context for the running BL image.
Change-Id: Icece1cde4813fac19452c782b682c758142b1489
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Move the header files that provide translation tables architectural
definitions from the library v2 source files to the library include
directory. This allows to share these definitions between both
versions (v1 and v2) of the library.
Create a new header file that includes the AArch32 or AArch64
definitions based on the AARCH32 build flag, so that the library user
doesn't have to worry about handling it on their side.
Also repurpose some of the definitions the header files provide to
concentrate on the things that differ between AArch32 and AArch64.
As a result they now contain the following information:
- the first table level that allows block descriptors;
- the architectural limits of the virtual address space;
- the initial lookup level to cover the entire address space.
Additionally, move the XLAT_TABLE_LEVEL_MIN macro from
xlat_tables_defs.h to the AArch32/AArch64 architectural definitions.
This new organisation eliminates duplicated information in the AArch32
and AArch64 versions. It also decouples these architectural files from
any platform-specific information. Previously, they were dependent on
the address space size, which is platform-specific.
Finally, for the v2 of the library, move the compatibility code for
ADDR_SPACE_SIZE into a C file as it is not needed outside of this
file. For v1, this code hasn't been changed and stays in a header
file because it's needed by several files.
Change-Id: If746c684acd80eebf918abd3ab6e8481d004ac68
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
This patch adds some debug prints to display some statistics about page
tables usage. They are printed only if the LOG_LEVEL is at least 50
(i.e. VERBOSE).
Sample output for BL1:
VERBOSE: Translation tables state:
VERBOSE: Max allowed PA: 0xffffffff
VERBOSE: Max allowed VA: 0xffffffff
VERBOSE: Max mapped PA: 0x7fffffff
VERBOSE: Max mapped VA: 0x7fffffff
VERBOSE: Initial lookup level: 1
VERBOSE: Entries @initial lookup level: 4
VERBOSE: Used 4 sub-tables out of 5 (spare: 1)
Change-Id: If38956902e9616cdcd6065ecd140fe21482597ea
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
This format is understood by almost all the UNIX tools (vi, emacs, acme, ...),
and it allows these tools to jump directly to the line where the assert
failed.
Change-Id: I648fa93c7cc65f911a17dcad5e1a775ac1ae5ed4
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
This fix modifies the order of system includes to meet the ARM TF coding
standard. There are some exceptions in order to retain header groupings,
minimise changes to imported headers, and where there are headers within
the #if and #ifndef statements.
Change-Id: I65085a142ba6a83792b26efb47df1329153f1624
Signed-off-by: Isla Mitchell <isla.mitchell@arm.com>
Use TF_LDFLAGS from the Makefiles, and still append LDFLAGS as well to
the compiler's invocation. This allows passing extra options from the
make command line using LDFLAGS.
Document new LDFLAGS Makefile option.
Change-Id: I88c5ac26ca12ac2b2d60a6f150ae027639991f27
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
A recent commit 030567e6f5 added U()/ULL()
macro to TF constants. This has caused some signed-unsigned comparison
warnings / errors in the TF static analysis.
This patch addresses these issues by migrating impacted variables from
signed ints to unsigned ints and vice verse where applicable.
Change-Id: I4b4c739a3fa64aaf13b69ad1702c66ec79247e53
Signed-off-by: David Cunado <david.cunado@arm.com>
Call svc_suspend_finish if registered.
psci_get_stat() is static to psci_stat.c
Fix types used in comparison.
Fix coding style (empty line between variable definition and instructions
block).
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
These errata are only applicable to AArch64 state. See the errata notice
for more details:
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.epm048406/index.html
Introduce the build options ERRATA_A53_835769 and ERRATA_A53_843419.
Enable both of them for Juno.
Apply the 835769 workaround as following:
* Compile with -mfix-cortex-a53-835769
* Link with --fix-cortex-a53-835769
Apply the 843419 workaround as following:
* Link with --fix-cortex-a53-843419
The erratum 843419 workaround can lead the linker to create new sections
suffixed with "*.stub*" and 4KB aligned. The erratum 835769 can lead the
linker to create new "*.stub" sections with no particular alignment.
Also add support for LDFLAGS_aarch32 and LDFLAGS_aarch64 in Makefile for
architecture-specific linker options.
Change-Id: Iab3337e338b7a0a16b0d102404d9db98c154f8f8
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
TLBI instructions for monitor mode won't have the desired effect under
specific circumstances in Cortex-A57 r0p0. The workaround is to
execute DSB and TLBI twice each time.
Even though this errata is only needed in r0p0, the current errata
framework is not prepared to apply run-time workarounds. The current one
is always applied if compiled in, regardless of the CPU or its revision.
The `DSB` instruction used when initializing the translation tables has
been changed to `DSB ISH` as an optimization and to be consistent with
the barriers used for the workaround.
NOTE: This workaround is present in AArch64 TF and already enabled by
default on Juno.
Change-Id: I10b0baa304ed64b13b7b26ea766e61461e759dfa
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
SPE is only supported in non-secure state. Accesses to SPE specific
registers from SEL1 will trap to EL3. During a world switch, before
`TTBR` is modified the SPE profiling buffers are drained. This is to
avoid a potential invalid memory access in SEL1.
SPE is architecturally specified only for AArch64.
Change-Id: I04a96427d9f9d586c331913d815fdc726855f6b0
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
This patch updates the el3_arch_init_common macro so that it fully
initialises essential control registers rather then relying on hardware
to set the reset values.
The context management functions are also updated to fully initialise
the appropriate control registers when initialising the non-secure and
secure context structures and when preparing to leave EL3 for a lower
EL.
This gives better alignement with the ARM ARM which states that software
must initialise RES0 and RES1 fields with 0 / 1.
This patch also corrects the following typos:
"NASCR definitions" -> "NSACR definitions"
Change-Id: Ia8940b8351dc27bc09e2138b011e249655041cfc
Signed-off-by: David Cunado <david.cunado@arm.com>
This patch enables cache helper functions `flush_dcache_range`,
`clean_dcache_range` and `invalidate_dcache_range` to exit early
if the size argument specified is zero
Change-Id: I0b63e8f4bd3d47ec08bf2a0b0b9a7ff8a269a9b0
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
This brings the implementation on par with the software
errata workarounds for AArch64.
Change-Id: I98a85fd92e32ae4259f4ec5b3e93cffc87090064
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
This brings the implementation on par with the software
errata workarounds for AArch64.
Change-Id: Id103602e35b1c0ad3705a5b2b7cdb34dd8a8c5e2
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
Helper function to assist with errata workaround application.
Change-Id: Idba42ca238442cc826f43444dbfa754e433a5e5e
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
This patch changes input param level in xlat_tables_print_internal() to
an unsigned int to fix the signed/unsigned comparison warnings. The
compiler complains about these warnings, thus halting the build flow
for Tegra platforms.
Change-Id: Ieccc262a63daca7a26ca6a14d81466397af8b89f
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: David Cunado <david.cunado@arm.com>
This patch makes all the defines in the CPU libraries unique,
by prefixing them with the CPU name.
NOTE: PLATFORMS USING THESE MACROS WILL HAVE TO UPDATE THEIR CODE
TO START USING THE UPDATED NAMES
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables the 'sign-compare' flag, to enable warning/errors
for comparisons between signed/unsigned variables. The warning has
been enabled for all the Tegra platforms, to start with.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Both Cortex-A75 and Cortex-A55 CPUs use the ARM DynamIQ Shared Unit
(DSU). The power-down and power-up sequences are therefore mostly
managed in hardware, and required software operations are considerably
simpler.
Change-Id: I68b30e6e1ebe7c041d5e67f39c59f08575fc7ecc
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
x8 is not a callee-saved register and can be corrupted.
Use x19 instead to be AAPCS-compliant.
FixesARM-software/tf-issues#478
Change-Id: Ib4f114c36f4c11351ae856f953c45dca92b27c3b
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
xlat_tables_arch.h uses the platform macro `PLAT_VIRT_ADDR_SPACE_SIZE`.
This macro is defined in xlat_tables_private.h only if the platform
still uses the deprecated `ADDR_SPACE_SIZE`.
Change-Id: I1c3b12ebd96bdfe9bf94b26d440c03bc0f8c0b24
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The behaviour of assert() now depends on the value of the new optional
platform define `PLAT_LOG_LEVEL_ASSERT`. This defaults to `LOG_LEVEL` if
not defined by the platform.
- If `PLAT_LOG_LEVEL_ASSERT` >= `LOG_LEVEL_VERBOSE`, it prints the file
name, line and asserted expression.
- If `PLAT_LOG_LEVEL_ASSERT` >= `LOG_LEVEL_INFO`, it prints the file
name and line.
- If not, it doesn't print anything.
Note the old behaviour was to print the function name whereas now it
prints the file name. This reduces memory usage because the file name is
shared between all assert calls in a given file. Also, the default
behaviour in debug builds is to no longer print the asserted expression,
greatly reducing the string usage.
For FVP debug builds this change saves approximately:
No TBBR TBBR
BL1 1.6 KB 2.2 KB
BL2 1.7 KB 2.1 KB
BL31 2.6 KB 3.3 KB
Change-Id: I2947569d593df0b25611dc3c7a6096f42155c115
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This patch enables compiler-rt for the AArch32 target. The code is
not used for AArch64 as the architecture supports the 64-bit division
and modulo operations natively.
Change-Id: I1703a92872b0bb56ac0b98c67193830683963b13
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
These are needed to provide division and modulo operations
for the AArch32 target.
This code is entirely unmodified. Imported from compiler-rt
master branch as of May 4 2017.
Change-Id: I001e1809f2afd4bf8d4cc3d2296798809f607144
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
In AArch64, privileged exception levels control the execution state
(a.k.a. register width) of the immediate lower Exception Level; i.e.
whether the lower exception level executes in AArch64 or AArch32 state.
For an exception level to have its execution state changed at run time,
it must request the change by raising a synchronous exception to the
higher exception level.
This patch implements and adds such a provision to the ARM SiP service,
by which an immediate lower exception level can request to switch its
execution state. The execution state is switched if the request is:
- raised from non-secure world;
- raised on the primary CPU, before any secondaries are brought online
with CPU_ON PSCI call;
- raised from an exception level immediately below EL3: EL2, if
implemented; otherwise NS EL1.
If successful, the SMC doesn't return to the caller, but to the entry
point supplied with the call. Otherwise, the caller will observe the SMC
returning with STATE_SW_E_DENIED code. If ARM Trusted Firmware is built
for AArch32, the feature is not supported, and the call will always
fail.
For the ARM SiP service:
- Add SMC function IDs for both AArch32 and AArch64;
- Increment the SiP service minor version to 2;
- Adjust the number of supported SiP service calls.
Add documentation for ARM SiP service.
FixesARM-software/tf-issues#436
Change-Id: I4347f2d6232e69fbfbe333b340fcd0caed0a4cea
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.
NOTE: Files that have been imported by FreeBSD have not been modified.
[0]: https://spdx.org/
Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
Replace all instances of checks with the new macro.
Change-Id: I0eec39b9376475a1a9707a3115de9d36f88f8a2a
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Translation regimes that only support one virtual address space (such as
the ones for EL2 and EL3) can flag memory regions as execute-never by
setting to 1 the XN bit in the Upper Attributes field in the translation
tables descriptors. Translation regimes that support two different
virtual address spaces (such as the one shared by EL1 and EL0) use bits
PXN and UXN instead.
The Trusted Firmware runs at EL3 and EL1, it has to handle translation
tables of both translation regimes, but the previous code handled both
regimes the same way, as if both had only 1 VA range.
When trying to set a descriptor as execute-never it would set the XN
bit correctly in EL3, but it would set the XN bit in EL1 as well. XN is
at the same bit position as UXN, which means that EL0 was being
prevented from executing code at this region, not EL1 as the code
intended. Therefore, the PXN bit was unset to 0 all the time. The result
is that, in AArch64 mode, read-only data sections of BL2 weren't
protected from being executed.
This patch adds support of translation regimes with two virtual address
spaces to both versions of the translation tables library, fixing the
execute-never permissions for translation tables in EL1.
The library currently does not support initializing translation tables
for EL0 software, therefore it does not set/unset the UXN bit. If EL1
software needs to initialize translation tables for EL0 software, it
should use a different library instead.
Change-Id: If27588f9820ff42988851d90dc92801c8ecbe0c9
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-1 is not a defined mmap_attr_t type. Instead of using invalid enum
types, we can either choose to define a INVALID type OR handle the
condition specifically.
Since the usage of mmap_region_attr is limited, it is easier to just
handle the error condition specifically and return 0 or -1 depending
on success or fail.
Fixes: ARM-Software/tf-issues#473
Fixes: 28fa2e9ee8 ("xlat lib: Use mmap_attr_t type consistently")
Signed-off-by: Nishanth Menon <nm@ti.com>
utils.h is included in various header files for the defines in it.
Some of the other header files only contain defines. This allows the
header files to be shared between host and target builds for shared defines.
Recently types.h has been included in utils.h as well as some function
prototypes.
Because of the inclusion of types.h conflicts exist building host tools
abd these header files now. To solve this problem,
move the defines to utils_def.h and have this included by utils.h and
change header files to only include utils_def.h and not pick up the new
types.h being introduced.
FixesARM-software/tf-issues#461
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Remove utils_def.h from utils.h
This patch removes utils_def.h from utils.h as it is not required.
And also makes a minor change to ensure Juno platform compiles.
Change-Id: I10cf1fb51e44a8fa6dcec02980354eb9ecc9fa29
This patch adds AArch32 state support for ARM Cortex-A53,
Cortex-A57 and Cortex-A72 MPCore Processor in the CPU specific
operations framework.
NOTE: CPU errata handling code is not present in this patch.
Change-Id: I01eb3e028e40dde37565707ebc99e06e7a0c113d
Signed-off-by: Yatharth Kochar <yatharth.kochar@arm.com>
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
This patch modifies both versions of the translation table library
to use the mmap_attr_t type consistently wherever it is manipulating
MT_* attributes variables. It used to use mmap_attr_t or plain integer
types interchangeably, which compiles fine because an enumeration type
can be silently converted to an integer, but which is semantically
incorrect.
This patch removes this assumption by using the abstract type
'mmap_attr_t' all the time.
Change-Id: Id1f099025d2cb962b275bb7e39ad2c4dbb4e366c
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Many asserts depend on code that is conditionally compiled based on the
DEBUG define. This patch modifies the conditional inclusion of such code
so that it is based on the ENABLE_ASSERTIONS build option.
Change-Id: I6406674788aa7e1ad7c23d86ce94482ad3c382bd
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The build option `ENABLE_ASSERTIONS` should be used instead. That way
both C and ASM assertions can be enabled or disabled together.
All occurrences of `ASM_ASSERTION` in common code and ARM platforms have
been replaced by `ENABLE_ASSERTIONS`.
ASM_ASSERTION has been removed from the user guide.
Change-Id: I51f1991f11b9b7ff83e787c9a3270c274748ec6f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Add the new build option `ENABLE_ASSERTIONS` that controls whether or
not assert functions are compiled out. It defaults to 1 for debug builds
and to 0 for release builds.
Additionally, a following patch will be done to allow this build option
to hide auxiliary code used for the checks done in an `assert()`. This
code is is currently under the DEBUG build flag.
Assert messages are now only printed if LOG_LEVEL >= LOG_LEVEL_INFO,
which is the default for debug builds.
This patch also updates the User Guide.
Change-Id: I1401530b56bab25561bb0f274529f1d12c5263bc
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This patch introduces a build option to enable D-cache early on the CPU
after warm boot. This is applicable for platforms which do not require
interconnect programming to enable cache coherency (eg: single cluster
platforms). If this option is enabled, then warm boot path enables
D-caches immediately after enabling MMU.
FixesARM-Software/tf-issues#456
Change-Id: I44c8787d116d7217837ced3bcf0b1d3441c8d80e
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
davidcunado-arm
Roberto Vargas
Antonio Nino Diaz
Dimitris Papastamos
Soby Mathew
Sandrine Bailleux
Victor Chong
Etienne Carriere
Masahiro Yamada
Joel Hutton
Julius Werner
Manoj Kumar
Matt Ma
Jeenu Viswambharan
Douglas Raillard
Eleanor Bonnici
danh-arm
Isla Mitchell
Alistair Francis
Ken Kuang
Summer Qin
Varun Wadekar
Etienne Carriere
David Wang
Nishanth Menon
Scott Branden
Scott Branden
Yatharth Kochar