On RME-enabled platforms, it is currently not possible to incorporate
mapping of all bl_regions specified in bl31 setup[1] with the
ARM_BL_REGIONS macro defined to 6. Hence increased its count to 7.
[1]: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/
plat/arm/common/arm_bl31_setup.c#n380
Change-Id: Ieaa97f026ab2ae6eae22442595aa4122ba0a13c4
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Cortex-A510 erratum 2042739 is a Cat B erratum that applies to revisions
r0p0, r0p1 and r0p2 and is fixed in r0p3.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I1d2ebee3914396e1e298eb45bdab35ce9e194ad9
Cortex-A510 erratum 2288014 is a Cat B erratum that applies to revisions
r0p0, r0p1, r0p2, r0p3 and r1p0, and is fixed in r1p1.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I875519ff55be90244cc3d3a7e9f7abad0fc3c2b8
Cortex-A510 erratum 1922240 is a Cat B erratum that applies to revision
r0p0 and is fixed in r0p1.
Since no errata framework code existed for A510 prior to this patch, it
has been added as well. Also some general cleanup changes in the CPU lib
makefile.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I8c427ef255cb4b38ed3e5c2c7444fcef957277e4
bitfield structure maybe has strict-aliasing issue for some compiler,
for example the old code has hang issue for yocto 3.4 toolchain, so
refine the code to avoid to use bitfield structure.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I6b6d7597311240dd6d6b8ca4ce508c69332f9c68
* changes:
test(el3-runtime): dit is retained on world switch
fix(el3-runtime): set unset pstate bits to default
refactor(el3-runtime): add prepare_el3_entry func
Add the SZ_* macros from 32 to 2G.
This allows removing some defines in raw NAND driver
and STM32MP1 boot device selection code.
Change-Id: I3c4d4959b0f43e785eeb37a43d03b2906b7fcfbc
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Arpita S.K <Arpita.S.K@arm.com>
Cortex-A710 erratum 2136059 is a Cat B erratum that applies to
revisions r0p0, r1p0 and r2p0 of the CPU. It is fixed in r2p1.
The workaround is to set CPUACTLR5_EL1[44] to 1 which will cause
the CPP instruction to invalidate the hardware prefetcher state
trained from any EL.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I43a86a365418fb663cc1b6ab1d365b4beddae0bc
Cortex-A710 erratum 2267065 is a Cat B erratum that applies to
revisions r0p0, r1p0 and r2p0 of the CPU. It is fixed in r2p1.
The workaround is to set CPUACTLR_EL1[22] to 1'b1. Setting
CPUACTLR_EL1[22] will cause the CFP instruction to invalidate
all branch predictor resources regardless of context.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Ia9085aaf9b2b6a2b25d03ab36bd3774839fac9aa
Cortex-X2 erratum 2216384 is a Cat B erratum that applies to
revisions r0p0, r1p0 and r2p0 of CPU. It is fixed in r2p1.
The workaround is to set CPUACTLR5_EL1[17] to 1'b1 followed by
applying an instruction patching sequence.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100/latest
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I3c216161678887c06a28c59644e784e0c7d37bab
Cortex-X2 erratum 2081180 is a Cat B erratum present in r0p0, r1p0
and r2p0 of the Cortex-X2 processor core.
Cortex-X2 SDEN: https://developer.arm.com/documentation/SDEN1775100
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I64bed2fd5b7e12932d6de2ae668786e689885188
Cortex-X2 erratum 2017096 is a Cat B erratum that applies to
revisions r0p0, r1p0 & r2p0. The workaround is to set CPUECLTR_EL1[8]
to 1 which disables store issue prefetching.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: I3b740aedc95c2394f6b8d1186014d2b2f640ae05
Older Qualcomm SoCs seem to have a custom Qualcomm implementation of
the GICv2 specification. It's mostly compliant but unfortunately it
looks like a mistake was made with the GICD_PIDR registers. PIDR2 is
defined to be at offset 0xFE8, but the Qualcomm implementation has it
at 0xFD8.
It looks like the entire PIDR0-3/4-7 block is swapped compared to the
ARM implementation: PIDR0 starts at 0xFD0 (instead of 0xFE0)
and PIDR4 starts at 0xFE0 (instead of 0xFD0).
Actually this only breaks a single assert in gicv2_main.c that checks
the GIC version: assert((gic_version == ARCH_REV_GICV2) ...
In release mode everything seems to work correctly.
To keep the code generic, allow affected platforms to override the
GICD_PIDR2_GICV2 register address in platform_def.h. Since this header
is typically included very early (e.g. from assert.h), add an #ifndef
so the definitions from platform_def.h takes priority.
Change-Id: I2929a8c1726f8d751bc28796567eb30b81eca2fe
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Add tsp service to check the value of the PSTATE DIT bit is as
expected and toggle it's value. This is used to ensure that
the DIT bit is maintained during a switch from the Normal to
Secure worlds and back.
Change-Id: I4e8bdfa6530e5e75925c0079d4fa2795133c5105
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
During a transition to a higher EL some of the PSTATE bits are not set
by hardware, this means that their state may be leaked from lower ELs.
This patch sets those bits to a default value upon entry to EL3.
This patch was tested using a debugger to check the PSTATE values
are correctly set. As well as adding a test in the next patch to
ensure the PSTATE in lower ELs is still maintained after this change.
Change-Id: Ie546acbca7b9aa3c86bd68185edded91b2a64ae5
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
From the new binding, the RCC become secured based on the new
compatible. This must be done only from the secure OS initialisation.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I7f0a62f22bfcca638ddaefc9563df00f89f01653
Allow to set a gpio in output mode from the device tree.
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Change-Id: Ic483324bc5fe916a60df05f74706bd1da4d08aa5
No functional, change, but some improvements:
- Declare set_gpio() as static (only called locally)
- Handle the type ('open-drain') property independently from the
mode one.
- Replace mmio_clrbits_32() + mmio_setbits_32() with
mmio_clrsetbits_32().
- Add a missing log
- Add missing U() in macro definitions
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Change-Id: I1a79609609ac8e8001127ebefdb81def573f76fa
Rename driver file to BSEC2.
Split header file in IP and feature parts.
Add functions to access BSEC scratch register.
Several corrections and improvements.
Probe the driver earlier, especially to check debug features.
Change-Id: I1981536398d598d67a19d2d7766dacc18de72ec1
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This patch adds the basic CPU library code to support the Poseidon CPU
in TF-A. Poseidon is derived from HunterELP core, an implementation of
v9.2 architecture. Currently, Hunter CPU the predecessor to HunterELP,
is supported in TF-A. Accordingly the Hunter CPU library code has been
as the base and adapted here.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I406b4de156a67132e6a5523370115aaac933f18d
Rework the internal functions __stm32mp1_clk_enable/disable to check for
reference count instead of secure status for a clock.
Some functions now unused can be removed.
Change-Id: Ie4359110d7144229f85c961dcd5a019222c3fd25
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add a platform hook for returning the boot index, i.e. the bank from
which the platform has booted the updatable firmware images. This
value will be passed to the Update Agent.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: Ic7bef21071c48cfc7b69c50e89df9ff758d95b00
Add a helper function to pass the metadata structure to the
platforms. Platforms can then read the metadata structure and pass the
boot index value, i.e. the bank(partition) from which the firmware
images were booted, to the Update Agent.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I571179b9baa0fbc4d0f08d7a6e3b50c0c7165c5c
With the GPT partition scheme, a partition can be identified using
it's UniquePartitionGUID, instead of it's name. Add a function to
identify the partition based on this GUID value. This functionality is
useful in identification of a partition whose UniquePartitionGUID
value is known.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I543f794e1f7773f969968a6bce85ecca6f6a1659
The FWU multi bank feature supports multiple partitions or banks of
firmware components, where a platform can support having an active and
a backup partition(bank) of firmware images to boot from. This feature
identifies the images in a given bank using image GUID's --
this GUID value corresponds to the UniquePartitionGUID value used to
uniquely identify a GPT partition.
To support identification of images, add a member to the
partition_entry structure to store the UniquePartitionGUID value of
the GPT partition entry. This value is subsequently used to select the
firmware image to boot in a multi partition setup.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I2d235467ce7a7f20ebc1cef4db09924a5282e714
The EFI_NAMELEN macro has been moved to efi.h header. Get the macro
from efi.h. Use the struct efi_guid structure for declaring GUID
members in gpt.h
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I1c3a2605b9f857b9cf2dcfdaed4dc9d0a2cbf0f0
The FWU metadata structure uses GUID's to identify the updatable
firmware images. Add some basic helper functions and
macros that would be used for working with the GUID datatype.
With the FWU feature enabled, these would then be used for image
identification and booting of images from a particular
bank(partition).
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: Ia54c0402d72b503d6abd1d94bc751cc14602cd39
The metadata structure copy is passed to the platform routine to set
the image source to boot the platform from. This is done by reading
the metadata structure. Pass the metadata as a read-only copy to the
routine -- the routine only needs to consume the metadata values and
should not be able to update the metadata fields.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I399cad99ab89c71483e5a32a1de0e22df304f8b0
Added offset for register DEVDISR2 and DEVDISR3, added
bit definiton for PORSR1_RCW, and some macro for SVR.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Ie49392b89280c6c2c3510fcb4c85d827a1efdac0
Instead of transmitting an 'enum stm32mp_osc_id', just send
directly the clock name with a 'const char *'
Change-Id: I866b05cbb1685a9b9f80e63dcd5ba7b1d35fc932
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Add L1PCTL field definiton in register CPUACTLR_EL1.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Iebfb240ac58aa8f3dc870804bf4390dfbdfa9b95
Measured-Boot and Trusted-Boot are orthogonal to each other and hence
removed dependency of Trusted-Boot on Measured-Boot by making below
changes -
1. BL1 and BL2 main functions are used for initializing Crypto module
instead of the authentication module
2. Updated Crypto module registration macro for MEASURED_BOOT with only
necessary callbacks for calculating image hashes
3. The 'load_auth_image' function is now used for the image measurement
during Trusted or Non-Trusted Boot flow
Change-Id: I3570e80bae8ce8f5b58d84bd955aa43e925d9fff
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
These basic tests are generic and should be used independently of the
driver, depending on the plaftorm characteristics.
Change-Id: I38161b659ef2a23fd30a56e1c9b1bd98461a2fe4
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@foss.st.com>
stm32mp_ddrctl structure contains DDRCTRL registers definitions.
stm32mp_ddr_info contains general DDR information extracted from DT.
stm32mp_ddr_size moves to the generic side.
stm32mp1_ddr_priv contains platform private data.
stm32mp_ddr_dt_get_info() and stm32mp_ddr_dt_get_param() allow to
retrieve data from DT. They are located in new generic c/h files in
which stm32mp_ddr_param structure is declared. Platform makefile
is updated.
Adapt driver with this new classification.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I4187376c9fff1a30e7a94407d188391547107997
A new flag STM32MP_DDR_DUAL_AXI_PORT is added, and enabled by default.
It will allow choosing single or dual AXI ports for DDR.
Change-Id: I48826a66a6f4d18df87e081c0960af89ddda1b9d
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Add the read data eye training = training for optimal read valid placement
(RVTRN) when the built-in calibration is executed for LPDDR2 and LPDDR3.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I7ac1c77c21ebc30315b532741f2f255c2312d5b2
The support of a predefined DDR PHY tuning result is removed for
STM32MP1 driver because it is not needed at the supported frequency
when built-in calibration is executed.
The calibration parameters were provided in the device tree by the
optional node "st,phy-cal", activated in ddr helper file by the
compilation flag DDR_PHY_CAL_SKIP and filled with values generated
by CubeMX.
This patch
- updates the binding file to remove "st,phy-cal" support
- updates the device trees and remove the associated defines
- simplifies the STM32MP1 DDR driver and remove the support of
the optional "st,phy-cal"
After this patch the built-in calibration is always executed.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I3fc445520c259f7f05730aefc25e64b328bf7159
Refactor the GPIO code to use a small lookup table instead of redundant or
repetitive code.
Signed-off-by: Jona Stubbe <tf-a@jona-stubbe.de>
Change-Id: Icf60385095efc1f506e4215d497b60f90e16edfd
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
For somewhat historical reasons we are doing some initial PMIC regulator
setup in BL31, as U-Boot does not (yet) have a PMIC driver. This worked
fine so far, but there is at least one board (OrangePi 3) that gets upset,
because the Ethernet PHY needs some *coordinated* bringup of *two*
regulators.
To avoid custom hacks, let's introduce a build option to keep doing the
regulator setup in TF-A. Defining SUNXI_SETUP_REGULATORS to 0 will break
support for some devices on some boards in U-Boot (Ethernet and HDMI),
but will allow to bring up the OrangePi 3 in Linux correctly. We keep
the default at 1 to not change the behaviour for all other boards.
After U-Boot gained proper PMIC support at some point in the future, we
will probably change the default to 0, to get rid of the less optimal
PMIC code in TF-A.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Ie8e2583d0396f6eeaae8ffe6b6190f27db63e2a7
To correctly initialize the MMC devices, a power cycle is required.
For this we need to:
- disable vmmc-supply regulator
- make the power cycle required for SDMMC2 peripheral
- enable regulators
Change-Id: I2be6d9082d1cc4c864a82cf2c31ff8522e2d31a2
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Fixed regulator is mainly used when no pmic is available
Change-Id: Ib6a998684bcb055ba95a093bee563372d9051474
Signed-off-by: Pascal Paillet <p.paillet@st.com>
print_pmic_info_and_debug() prints the PMIC version ID and displays
regulator information if debug is enabled.
It is under DEBUG flag and called after initialize_pmic() in BL2.
Change-Id: Ib81a625740b7ec6abb49cfca05e44c69efaa4718
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Add a regulator framework to:
- provide an interface to consumers and drivers,
- connect consumers with drivers,
- handle most of devicetree-parsing,
- handle always-on and boot-on regulators,
- handle min/max voltages,
Change-Id: I23c939fdef2c71a416c44c9de332f70db0d2aa53
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Add support for ICC, sink mode, bypass mode,
active discharge and list voltages.
Handle LDO3 sink source mode in a different way to avoid
setting voltage while in sink source mode.
Change-Id: Ib1b909fd8a153f542917f650e43e24317a570534
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Add regulators boost, pwr_sw1 and pwr_sw2 regulators related to
USB OTG supply BOOST, SW_OTG and SWIN/SWOUT. These regulators are
needed since manipulated during the suspend/resume power sequence
as per FDT description for stm32mp15x-xxx boards from
STMicroelectronics.
Change-Id: I6217de707e49882bd5a9100db43e0d354908800d
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
This is mainly a clock interface with clk_ops callbacks.
Those callbacks are: enable, disable, get_rate, set_parent,
and is_enabled.
This framework is compiled for STM32MP1.
Change-Id: I5119a2aeaf103ceaae7a60d9e423caf0c148d794
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Cortex X2 erratum 2058056 is a Cat B erratum present in the X2 core.
It applies to revisions r0p0, r1p0, and r2p0 and is still open.
There are 2 ways this workaround can be accomplished, the first of
which involves executing a few additional instructions around MSR
writes to CPUECTLR when disabling the prefetcher. (see SDEN for
details)
However, this patch implements the 2nd possible workaround which sets
the prefetcher into its most conservative mode, since this workaround
is generic.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Idb20d9928c986616cd5bedf40bb29d46d384cfd3
Cortex X2 erratum 2083908 is a Cat B erratum present in the Cortex
X2 core. It applies to revision r2p0 and is still open.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775100
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Id9dca2b042bf48e75fb3013ab37d1c5925824728
FEAT_CCIDX modifies the register fields in CCSIDR/CCSIDR2 (aarch32)
and CCSIDR_EL1 (aarch64). This patch adds a check to the do_dcsw_op
function to use the right register format rather than assuming
that FEAT_CCIDX is not implemented.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I12cd00cd7b5889525d4d2750281a751dd74ef5dc
Add set_gpio_reset_cfg() to set a pin in its reset configuration:
analog, no-pull, speed low, and its secure configuration, thanks to
stm32_gpio_is_secure_at_reset().
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I7b73c3636859f97fcc57f81cf68b42efc727922e
A new function dyn_cfg_dtb_info_get_index() is created to get the index
of the given image config_id in the dtb_infos pool.
This allows checking if an image with a specific ID is in the FIP.
Change-Id: Ib300ed08e5b8a683dc7980a90221c305fb3f457d
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The HAFGRTR_EL2 register is UNDEFINED unless the CPU supports both
FEAT_FGT and FEAT_AMUv1. FEAT_FGT is mandatory for v8.6-A and upwards,
but FEAT_AMUv1 is optional (from v8.4-A upwards), and as such any
8.6-A cores today without support for FEAT_AMUv1 will trigger an
undefined instruction exception on accessing this register.
Currently ARM_ARCH_AT_LEAST macro has been used to associate with an
architecture extension allowing to access HAFGRTR_EL2 register. This
condition should be replaced with macros specific to individual
features. This patch adds a new set of macros "ENABLE_FEAT_FGT,
ENABLE_FEAT_AMUv1, ENABLE_FEAT_ECV" under build options to provide
controlled access to the HAFGRTR_EL2 register.
Further to ensure that the the build options passed comply
with the given hardware implementation, a feature detection mechanism,
checking whether build options match with the architecture is required
at bootime. This will be implemented and pushed later in a separate
patch.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: Ie390f4babe233b8b09455290277edbddecd33ead
Implemented a platform function 'plat_mboot_measure_critical_data' to
measure critical data and record its measurement using the Event Log
driver.
'bl2_plat_mboot_finish' function invokes this platform function
immediately after populating the critical data.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ia198295c6e07ab26d436eab1ff90df2cf28303af
It doesn't look correct to use mbed TLS defines directly in the Event
Log driver as this driver may use another Crypto library in future.
Hence mbed TLS Crypto dependency on Event Log driver is removed by
introducing generic Crypto defines and uses those in the Event Log
driver to call Crypto functions.
Also, updated mbed TLS glue layer to map these generic Crypto defines
to mbed TLS library defines.
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ibc9c751f60cbce4d3f3cf049b7c53b3d05cc6735
This patch allocates the RMI and GTSI FIDs from the reserved
range in Standard Secure Service call range of SMCCC.
Signed-off-by: Subhasish Ghosh <subhasish.ghosh@arm.com>
Change-Id: I82e77778882194c2a78ca6340788d53bab7c3a50
Add a UART/USART driver for STM32 with complete a hardware support;
it used for STM32CubeProgrammer support with even parity.
This driver is not used for console, which is already handle
by a simple driver (drivers/st/uart/aarch32/stm32_console.S).
Change-Id: Ia9266e5d177fe7fd09c8a15b81da1a05b1bc8b2d
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Sometimes when changing UART clock from TBG to XTAL, UART HW enters into
some broken state. It does not transit characters from TX FIFO anymore
and TX FIFO stays always empty. TX FIFO reset does not recover UART HW
from this broken state.
Experiments show that external reset can fix UART HW from this broken
state.
TF-A fatal error handler calls console_a3700_core_init() function to
initialize UART HW. This handler may be called anytime during CPU
runtime, also when kernel is running.
U-Boot or Linux kernel may change UART clock to TBG to achieve higher
baudrates. During initialization, console_a3700_core_init() resets UART
configuration to default settings, which means that it also changes
UART clock from TBG to XTAL.
Do an external reset of UART via North Bridge Peripheral reset register
to prevent this UART hangup.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I8990bce24d1a6fd8ccc47a2cd0a5ff932fcfcf14
Renamed a macro 'INVALID_ID' to 'EVLOG_INVALID_ID' to avoid its clash
with other macro names and to show it is explicitly used for Event
Log driver.
Change-Id: Ie4c92b3cd1366d9a59cd6f43221e24734865f427
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This patch adds two new compile time options to enable SME in TF-A:
ENABLE_SME_FOR_NS and ENABLE_SME_FOR_SWD for use in non-secure and
secure worlds respectively. Setting ENABLE_SME_FOR_NS=1 will enable
SME for non-secure worlds and trap SME, SVE, and FPU/SIMD instructions
in secure context. Setting ENABLE_SME_FOR_SWD=1 will disable these
traps, but support for SME context management does not yet exist in
SPM so building with SPD=spmd will fail.
The existing ENABLE_SVE_FOR_NS and ENABLE_SVE_FOR_SWD options cannot
be used with SME as it is a superset of SVE and will enable SVE and
FPU/SIMD along with SME.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Iaaac9d22fe37b4a92315207891da848a8fd0ed73
Changing the SMC code value to conform with RMM for
transitioning a realm granule back to non-secure,
otherwise known as undelegate.
Signed-off-by: Mark Dykes <mark.dykes@arm.com>
Change-Id: Ia45ad6cab538de48c65b071b49e504be234afa2b
Use long instead of long long on aarch64 for 64_t stdint types.
Introduce inttypes.h to properly support printf format specifiers for
fixed width types for such change.
Change-Id: I0bca594687a996fde0a9702d7a383055b99f10a1
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Correctly handle USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION request
in USB driver and support a different result than
USB_DESC_TYPE_CONFIGURATION with the new optional ops
get_other_speed_config_desc().
The support of this descriptor is optionnal and is only
required when high-speed capable device which can operate at its
other possible speed.
This patch allows to remove the pbuf update in usb_core_get_desc()
and solves an issue on USB re-enumeration on STM32MP15 platform
as the result of get_config_desc() is a const array.
This issue is not see on normal use-case, as the USB enumeration
is only done in ROM code and TF-A reuse the same USB descritors.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I8edcc1e45065ab4e45d48f4bc37b49120674fdb0
Neoverse-N2 erratum 2242400 is a Cat B erratum that applies to
revision r0p0 of CPU. It is still open. The workaround
is to set CPUACTLR5_EL1[17] to 1'b1 followed by setting few
system control registers to specific values as per attached
SDEN document.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest
Signed-off-by: nayanpatel-arm <nayankumar.patel@arm.com>
Change-Id: I6a9cb4a23238b8b511802a1ee9fcc5b207137649
Neoverse-N2 erratum 2138958 is a Cat B erratum that applies to
revision r0p0 of CPU. It is still open. The workaround
is to set CPUACTLR5_EL1[13] to 1'b1.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest
Signed-off-by: nayanpatel-arm <nayankumar.patel@arm.com>
Change-Id: I5247f8f8eef08d38c169aad6d2c5501ac387c720
Neoverse-N2 erratum 2242415 is a Cat B erratum that applies to
revision r0p0 of CPU. It is still open. The workaround
is to set CPUACTLR_EL1[22] to 1'b1. Setting CPUACTLR_EL1[22]
will cause CFP instruction to invalidate all branch predictor
resources regardless of context.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1982442/latest
Signed-off-by: nayanpatel-arm <nayankumar.patel@arm.com>
Change-Id: I442be81fbc32e21fed51a84f59584df17f845e96
When an Arm Ltd GIC (Arm GIC-[567]00) is instantiated with one or more
ITSes, the ITS MMIO frames appear between the distributor and
redistributor addresses. This makes the beginning of the redistributor
region dependent on the existence and number of ITSes.
To support various FPGA images, with and without ITSes, probe the
addresses in question, to learn whether they accommodate an ITS or a
redistributor. This can be safely done by looking at the PIDR[01]
registers, which contain an ID code for each region, documented in the
Arm GIC TRMs.
We try to find all ITSes instantiated, and skip either two or four 64K
frames, depending on GICv4.1 support. At some point we will find the
first redistributor; this address we then update in the DTB.
Change-Id: Iefb88c2afa989e044fe0b36b7020b56538c60b07
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The GIC specification describes ID registers in each GIC register frame
(PIDRx), which can be used to identify a GIC component. The Arm Ltd. GIC
implementations use certain ID values to identify the distributor, the
redistributors and other parts like ITSes.
Introduce a function that reads those part number IDs, which are spread
over two registers. The actual numbers are only meaningful in connection
with a certain GIC model, which would need to be checked beforehand, by
the caller.
Change-Id: Ia6ff326a1e8b12664e4637bc8e2683d2b5c7721c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
For platforms where we don't know the number of cores at compile time,
the size of the GIC redistributor frame is then also undetermined, since
it depends on this number of cores.
On top of this the GICR base address can also change, when an unknown
number of ITS frames (including zero) take up space between the
distributor and redistributor.
So while those two adjustments are done for independent reasons, the
code for doing so is very similar, so we should utilise the existing
fdt_adjust_gic_redist() function.
Add an (optional) gicr_base parameters to the prototype, so callers can
choose to also adjust this base address later, if needed.
Change-Id: Id39c0ba83e7401fdff1944e86950bb7121f210e8
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Define a handler in the SPMD to route secure interrupts occurring while
the normal world runs. On a Group1 Secure interrupt (with a GICv3 or a
Group0 interrupt on GICv2), the normal world is pre-empted to EL3 and
redirected to the SPMD/SPMC for further handling.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Change-Id: I1350d74048c5549a2af8da0ba004c08512cc006a
* changes:
feat(plat/st/stm32mp1): add STM32MP_USB_PROGRAMMER target
feat(plat/st/stm32mp1): add USB DFU support for STM32MP1
feat(plat/st): add STM32CubeProgrammer support on USB
feat(drivers/st/usb): add device driver for STM32MP1
feat(plat/st): add a USB DFU stack
feat(drivers/usb): add a USB device stack
Add a device driver for Synopsis DWC2 USB IP of STM32MP15x,
this USB OTG device is only supported in device mode.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I90b21f094f6637b85f3ace23a3a3a2f6fd4e0951
Add a new USB framework to manage an USB device profile (USBD)
based on a peripheral controller driver (PCD).
This USB stack can be use to implement any Universal Serial Bus Device
Class in TF-A on top of a USB driver defined in the platform.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I7971ec6d952edec3511157a198e6e5359df4346b
This patch removes files that are not used by TF-R as well as
removes unused generic files from the TF-R makefile.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Idb15ac295dc77fd38735bf2844efdb73e6f7c89b
MPMM - the Maximum Power Mitigation Mechanism - is an optional
microarchitectural feature present on some Armv9-A cores, introduced
with the Cortex-X2, Cortex-A710 and Cortex-A510 cores.
MPMM allows the SoC firmware to detect and limit high activity events
to assist in SoC processor power domain dynamic power budgeting and
limit the triggering of whole-rail (i.e. clock chopping) responses to
overcurrent conditions.
This feature is enabled via the `ENABLE_MPMM` build option.
Configuration can be done via FCONF by enabling `ENABLE_MPMM_FCONF`, or
by via the plaform-implemented `plat_mpmm_topology` function.
Change-Id: I77da82808ad4744ece8263f0bf215c5a091c3167
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change makes AMU auxiliary counters configurable on a per-core
basis, controlled by `ENABLE_AMU_AUXILIARY_COUNTERS`.
Auxiliary counters can be described via the `HW_CONFIG` device tree if
the `ENABLE_AMU_FCONF` build option is enabled, or the platform must
otherwise implement the `plat_amu_topology` function.
A new phandle property for `cpu` nodes (`amu`) has been introduced to
the `HW_CONFIG` specification to allow CPUs to describe the view of
their own AMU:
```
cpu0: cpu@0 {
...
amu = <&cpu0_amu>;
};
```
Multiple cores may share an `amu` handle if they implement the
same set of auxiliary counters.
AMU counters are described for one or more AMUs through the use of a new
`amus` node:
```
amus {
cpu0_amu: amu-0 {
#address-cells = <1>;
#size-cells = <0>;
counter@0 {
reg = <0>;
enable-at-el3;
};
counter@n {
reg = <n>;
...
};
};
};
```
This structure describes the **auxiliary** (group 1) AMU counters.
Architected counters have architecturally-defined behaviour, and as
such do not require DTB entries.
These `counter` nodes support two properties:
- The `reg` property represents the counter register index.
- The presence of the `enable-at-el3` property determines whether
the firmware should enable the counter prior to exiting EL3.
Change-Id: Ie43aee010518c5725a3b338a4899b0857caf4c28
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change represents a general refactoring to clean up old code that
has been adapted to account for changes required to enable dynamic
auxiliary counters.
Change-Id: Ia85e0518f3f65c765f07b34b67744fc869b9070d
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change decouples the group 1 counter macros to facilitate dynamic
detection at runtime. These counters remain disabled - we will add
dynamic enablement of them in a later patch.
Change-Id: I820d05f228d440643bdfa308d030bd51ebc0b35a
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change removes the `AMU_GROUP0_COUNTERS_MASK` and
`AMU_GROUP0_MAX_COUNTERS` preprocessor definitions, instead retrieving
the number of group 0 counters dynamically through `AMCGCR_EL0.CG0NC`.
Change-Id: I70e39c30fbd5df89b214276fac79cc8758a89f72
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change reduces preprocessor dependencies on the
`AMU_GROUP1_NR_COUNTERS` and `AMU_GROUP1_COUNTERS_MASK` definitions, as
these values will eventually be discovered dynamically.
In their stead, we introduce the `ENABLE_AMU_AUXILIARY_COUNTERS` build
option, which will enable support for dynamically detecting and
enabling auxiliary AMU counters.
This substantially reduces the amount of memory used by platforms that
know ahead of time that they do not have any auxiliary AMU counters.
Change-Id: I3d998aff44ed5489af4857e337e97634d06e3ea1
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change introduces a small set of register getters and setters to
avoid having to repeatedly mask and shift in complex code.
Change-Id: Ia372f60c5efb924cd6eeceb75112e635ad13d942
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change reduces the exposed surface area of the AMU API in order to
simplify the refactoring work in following patches. The functions and
definitions privatized by this change are not used by other parts of the
code-base today.
BREAKING CHANGE: The public AMU API has been reduced to enablement only
to facilitate refactoring work. These APIs were not previously used.
Change-Id: Ibf6174fb5b3949de3c4ba6847cce47d82a6bd08c
Signed-off-by: Chris Kay <chris.kay@arm.com>
With the introduction of MPMM, the auxiliary AMU counter logic requires
refactoring to move away from a single platform-defined group 1 counter
mask in order to support microarchitectural (per-core) group 1 counters.
BREAKING CHANGE: The `PLAT_AMU_GROUP1_COUNTERS_MASK` platform definition
has been removed. Platforms should specify per-core AMU counter masks
via FCONF or a platform-specific mechanism going forward.
Change-Id: I1e852797c7954f92409222b066a1ae57bc72bb05
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change adds a new utility function - `fdtw_for_each_cpu` - to
invoke a callback for every CPU node listed in a flattened device tree
(FDT) with the node identifier and the MPIDR of the core it describes.
Signed-off-by: Chris Kay <chris.kay@arm.com>
Change-Id: Iabb5c0f0c9d11928a4a7a41cdc7d1e09aadeb2bc
This patch changes Cortex Demeter to Neoverse Demeter.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I7306d09ca60e101d0a96c9ceff9845422d75c160
This patch adds the basic CPU library code to support the Hunter CPU
in TF-A. This CPU is based on the Makalu core so that library code
was adapted as the basis for this patch.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I956b2dc0f43da7cec3e015252392e2694363e1b3
Currently on image entry, the data cache in the RW address range is
invalidated before MMU is enabled to safeguard against potential
stale data from previous firmware stage. If PIE is enabled however,
RO sections including the GOT may be also modified during pie fixup.
Therefore, to be on the safe side, invalidate the entire image
region if PIE is enabled.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I7ee2a324fe4377b026e32f9ab842617ad4e09d89
This change aims to make the UFS code more robust by performing a
controller reset if linkstartup fails. This idea was borrowed from
Linux's ufshcd_link_startup function.
Signed-off-by: Jorge Troncoso <jatron@google.com>
Change-Id: I6b52148d1bf155b11198dc82a39b1120057adaaf
This change aims to make the UFS code more robust by adding retry logic
and timeouts to ufshc_reset. We also define a new function
ufshc_hce_enable for Host Controller Enable (HCE). The inner and outer
retry pattern is based on Linux's ufshcd_hba_execute_hce function.
Signed-off-by: Jorge Troncoso <jatron@google.com>
Change-Id: I9403a5a25d3ca50af5f2f9a65b774f6a2d7a9626
This change aims to make the UFS code more robust by removing asserts
and adding retry logic. We also reduce repetition by reusing
ufshc_send_uic_cmd for DME_GET and DME_SET commands.
Signed-off-by: Jorge Troncoso <jatron@google.com>
Change-Id: Id70aa1687d5ca78dc7d47234372255ac5a04a612
* changes:
fix(stpmic1): fix power switches activation
fix(stpmic1): update error cases return
refactor(stpmic1): use BIT and GENMASK helpers
fix(stm32mp1_clk): keep RTC clock always on
fix(stm32mp1_clk): set other clocks as always on
Currently, for the supported SCMI protocols, the version returned by the SCMI
platform agent must be exactly matching the driver's version (major version).
The recent change for the required version of Power Domain protocol means that
the platform must return version 2.0. This can be however a limitation in some
cases, where a SCMI-v1.0 platform can still be considered compatible with the
driver supported in firmware.
Relax the protocol version requirement such that any version older than the
one supported by the drivers can still be compatible.
Note: For now this has effect only on Power Domain protocol, as the other
drivers still require the "base" version 1.0.
Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com>
Change-Id: I310ae1869c2e952991a8d733f394029ab64087bf
Made measurement strings compliant to Server Base Security Guide
(SBSG, Arm DEN 0086) hence updated measurement strings for BL32, BL31,
and SCP_BL2 images. As the GPT image is not get measured by BL2 so
removed its measurement string.
Also, namespaced measurement string defines that were looking quite
generic.
Change-Id: Iaa17c0cfeee3d06dc822eff2bd553da23bd99b76
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Introduced functions to set and get Event log information
(tpm_event_log address and its size).
In FVP platform case, measured boot with Event Log backend flow
work as below
1. event_log_init function called by BL1 to initialize Event Log
module
2. arm_set_tb_fw_info function called by BL1 to set the
'tpm_event_log_addr' and 'tpm_event_log_size' properties
in tb_fw_config
3. arm_get_tb_fw_info function called by BL2 to get tpm Event Log
parameters set by BL1. These parameters used by the BL2 to
extend the tpm Event Log records, and use these parameters
to initialize Event Log using event_log_init function
4. arm_set_nt_fw_info and arm_set_tos_fw_info function called by
BL2 to set 'tpm_event_log' address and its size properties in
nt_fw_config and tos_fw_config respectively
Alongside, this patch created a separate instances of plat_mboot_init
and plat_mboot_finish APIs for BL1 and BL2.
This patch is tested using the existing measured boot test configuration
in jenkins CI.
Change-Id: Ib9eca092afe580df014541c937868f921dff9c37
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
It looks safer and cleaner approach to record the measurement taken by
BL1 straightaway in TCG Event Log instead of deferring these recordings
to BL2.
Hence pull in the full-fledged measured boot driver into BL1 that
replaces the former ad-hoc platform interfaces i.e.
bl1_plat_set_bl2_hash, bl2_plat_get_hash.
As a result of this change the BL1 of Arm FVP platform now do the
measurements and recordings of below images:
1. FW_CONFIG
2. TB_FW_CONFIG
3. BL2
Change-Id: I798c20336308b5e91b547da4f8ed57c24d490731
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Currently, the Event Log driver does platform layer work by invoking
a few platform functions in the 'event_log_finalise' call. Doing
platform work does not seem to be the driver's responsibility, hence
moved 'event_log_finalise' function's implementation to the platform
layer.
Alongside, introduced few Event Log driver functions and done
some cosmetic changes.
Change-Id: I486160e17e5b0677c734fd202af7ccd85476a551
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Subsequent patches will provide a solution to do the BL2 hash measurement
and recording in BL1 itself, hence in preparation to adopt that solution
remove the logic of passing BL2 hash measurement to BL2 component
via TB_FW config.
Change-Id: Iff9b3d4c6a236a33b942898fcdf799cbab89b724
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Right now, event_log_init() does 2 things:
1) It writes all the necessary TCG data structures in the event log buffer.
2) It writes the first measurement (BL2's).
Step 2) introduces in the TCG event log driver an assumption on what
is getting measured and in what order. Ideally, the driver should only
be concerned about generic operations, such as initializing the event
log or recording a measurement in it. As much as possible, we should
design the driver such that it could be reused in another project that
has a different measure boot flow.
For these reasons, move step 2) up to the caller, plat_mboot_init() in
this case. Make event_log_record() a public function for this purpose.
This refactoring will also help when we make BL1 record BL2's
measurement into the event log (instead of BL2). Both BL1 and BL2 will
need to call the driver's init function but only BL1 will need
recording BL2's measurement. We can handle this through different
implementations of plat_mboot_init() for BL1 and BL2, leaving the TCG
event log driver unchanged.
Change-Id: I358e097c1eedb54f82b866548dfc6bcade83d519
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Right now, the assumption is that the platform post-load hook takes
care of measuring the image that just got loaded. This is how it's
implemented on FVP.
This patch moves the measurement into the generic code
instead. load_auth_image() now calls plat_mboot_measure_image(),
which is a new platform interface introduced in this patch to measure
an image. This is called just after authenticating the image.
Implement plat_mboot_measure_image() for the Arm FVP platform. The code
is copied straight from the post-load hook.
As a result, the FVP specific implementation of
arm_bl2_plat_handle_post_image_load() is no longer needed. We can go
back to using the Arm generic implementation of it.
Change-Id: I7b4b8d28941a865e10af9d0eadaf2e4850942090
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
With the removal of the generic functions measured_boot_init()/finish(),
measured_boot.mk becomes specific to the TCG event log backend. Change
its file name to event_log.mk.
Also, the Event Log driver is one of the backend of measured boot hence
created a separate folder for it under the measured_boot directory.
Alongside done some cosmetic changes (adding a comment and fixing
identation).
Change-Id: I4ce3300e6958728dc15ca5cced09eaa01510606c
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Right now, the measured boot driver is strongly coupled with the TCG
event log driver. It would not be possible to push the measurements
somewhere else, for instance to a physical TPM.
To enable this latter use case, turn the driver's init and teardown
functions into platform hooks. Call them bl2_plat_mboot_init()/finish().
This allows each platform to implement them appropriately, depending on
the type of measured boot backend they use. For example, on a platform
with a physical TPM, the plat_mboot_init() hook would startup the TPM
and setup it underlying bus (e.g. SPI).
Move the current implementation of the init and teardown function to the
FVP platform layer.
Finally move the conditional compilation logic (#if MEASURED_BOOT) out
of bl2_main() to improve its readability. Provide a dummy implementation
in the case measured boot is not included in the build.
Change-Id: Ib6474cb5a9c1e3d4a30c7f228431b22d1a6e85e3
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
tpm_record_measurement() function name suggests that:
- It only records a measurement but does not compute it.
This is not the case, the function does both.
- It stores this measurement into a TPM (discrete chip or fTPM).
This is not the case either, the measurement is just stored into
the event log, which is a data structure hold in memory, there is
no TPM involvement here.
To better convey the intent of the function, rename it into
event_log_measure_and_record().
Change-Id: I0102eeda477d6c6761151ac96759b31b6997e9fb
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
* changes:
refactor(gpt): productize and refactor GPT library
feat(rme): disable Watchdog for Arm platforms if FEAT_RME enabled
docs(rme): add build and run instructions for FEAT_RME
fix(plat/fvp): bump BL2 stack size
fix(plat/fvp): allow changing the kernel DTB load address
refactor(plat/arm): rename ARM_DTB_DRAM_NS region macros
refactor(plat/fvp): update FVP platform DTS for FEAT_RME
feat(plat/arm): add GPT initialization code for Arm platforms
feat(plat/fvp): add memory map for FVP platform for FEAT_RME
refactor(plat/arm): modify memory region attributes to account for FEAT_RME
feat(plat/fvp): add RMM image support for FVP platform
feat(rme): add GPT Library
feat(rme): add ENABLE_RME build option and support for RMM image
refactor(makefile): remove BL prefixes in build macros
feat(rme): add context management changes for FEAT_RME
feat(rme): add Test Realm Payload (TRP)
feat(rme): add RMM dispatcher (RMMD)
feat(rme): run BL2 in root world when FEAT_RME is enabled
feat(rme): add xlat table library changes for FEAT_RME
feat(rme): add Realm security state definition
feat(rme): add register definitions and helper functions for FEAT_RME
Following system registers are modified before exiting EL2 to allow
u-boot/Linux to boot
1. CNTHCTL_EL2.EL1PCTEN -> 1
Allows U-boot to use physical counters at EL1
2. VTCR_EL2.MSA -> 1
Enables VMSA at EL1, which is required by U-Boot and Linux.
3. HCR_EL2.APK = 1 & HCR_EL2.API = 1
Disables PAuth instruction and register traps in EL1
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I58f45b6669a9ad1debb80265b243015c054a9bb1
Now lx2 which use MT35XU512A supports warm boot, fix the macro
define caused by the commit:
feat(driver/nxp/xspi): add MT35XU02G flash info
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I83eb8cb9a30ac7c7efd5a010acbd03eddebed52b
Use BIT and GENMASK macros to ease stpmic1.h reading.
Change-Id: I808a62818d4188bb2f3686ab37518d369b6c41cb
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
This patch updates and refactors the GPT library and fixes bugs.
- Support all combinations of PGS, PPS, and L0GPTSZ parameters.
- PPS and PGS are set at runtime, L0GPTSZ is read from GPCCR_EL3.
- Use compiler definitions to simplify code.
- Renaming functions to better suit intended uses.
- MMU enabled before GPT APIs called.
- Add comments to make function usage more clear in GPT library.
- Added _rme suffix to file names to differentiate better from the
GPT file system code.
- Renamed gpt_defs.h to gpt_rme_private.h to better separate private
and public code.
- Renamed gpt_core.c to gpt_rme.c to better conform to TF-A precedent.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I4cbb23b0f81e697baa9fb23ba458aa3f7d1ed919
When RME is enabled, during configuration of the TrustZone controller,
Root regions are initially configured as Secure regions, and Realm
regions as Non-secure regions. Then later these regions are configured
as Root and Realm regions respectively in the GPT. According to the RME
architecture reference manual, Root firmware must ensure that Granule
Protection Check is enabled before enabling any stage of translation.
Therefore initializations are done as follows when RME is enabled :
Initialize/enable the TrustZone controller (plat_arm_security_setup) -->
Initialize/enable GPC (arm_bl2_plat_gpt_setup) -->
enable MMU (enable_mmu_el3)
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I91094e8259079437bee02de1f65edb9ad51e43cf
When FEAT_RME is enabled, memory is divided into four Physical
Address Spaces (PAS): Root, Realm, Secure and Non-secure.
This patch introduces new carveouts for the Trusted SRAM and DRAM
for the FVP platform accordingly.
The following new regions are introduced with this change:
ARM_MAP_L0_GPT_REGION: Trusted SRAM region used to store Level 0
Granule Protection Table (GPT). This region resides in the Root PAS.
ARM_MAP_GPT_L1_DRAM: DRAM region used to store Level 1 GPT. It
resides in the Root PAS.
ARM_MAP_RMM_DRAM: DRAM region used to store RMM image. It
resides in the Realm PAS.
The L0 GPT is stored on Trusted SRAM next to firmware configuration
memory. The DRAM carveout when RME is enable is modified as follow:
--------------------
| |
| AP TZC (~28MB) |
--------------------
| |
| REALM (32MB) |
--------------------
| |
| EL3 TZC (3MB) |
--------------------
| L1 GPT + SCP TZC |
| (~1MB) |
0xFFFF_FFFF --------------------
During initialization of the TrustZone controller, Root regions
are configured as Secure regions. Then they are later reconfigured
to Root upon GPT initialization.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: If2e257141d51f51f715b70d4a06f18af53607254
If FEAT_RME is enabled, EL3 runs in the Root world as opposed to
Secure world. This patch changes EL3 memory region attributes for
Arm platforms accordingly.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: Ie176f8b440ff34330e4e44bd3bf8d9703b3892ff
This patch introduces the Granule Protection Table (GPT)
library code. This implementation will be updated later to
be more flexible, as the current implementation is very rigid.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I3af824a28c6e9a5d36459c0c51d2d9bebfba1505
Manish V Badarkhe
johpow01
Madhukar Pappireddy
Jiafei Pan
Federico Recanati
Manish Pandey
Yann Gautier
Bipin Ravi
Stephan Gerhold
Daniel Boulby
Lionel Debieve
Fabien Dessenne
Nicolas Le Bayon
Jayanth Dodderi Chidanand
Sughosh Ganu
Sandrine Bailleux
Gabriel Fernandez
Nicolas Le Bayon
Patrick Delaunay
Jona Stubbe
André Przywara
Joanna Farley
Pascal Paillet
Yann Gautier
Etienne Carriere
Alexei Fedorov
Subhasish Ghosh
Pali Rohár
Mark Dykes
Olivier Deprez
Scott Branden
nayanpatel-arm
Patrick Delaunay
Chris Kay
Zelalem Aweke
Jorge Troncoso
Nicola Mazzucato
Soby Mathew
Pankaj Gupta