The constants BUNDLE_PERIOD_SCALE and PLL_READY_DLY refer to two
multi-bit registers within the Clock Source Low register. These
constants are used as masks for those registers (and values are not
defined since we are writing zeros to them).
Give them the _MASK suffix.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Id469d0ab4c755d2d6a0150a1ade33dd9d0293667
The register at offset 0x1C3 is called Clock Source Low in functional
specification, but we use constant name GLOB_CLK_SRC_LO. Rename it to
RST_CLK_CTRL instead.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: If7ca460cb166f3828678e1e09c4e6caf5bb77770
The register at offset 0x1C1 is called Reset and Clock Control in
functional specification, but we use constant name GLOB_PHY_CTRL0.
Rename it to RST_CLK_CTRL instead.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I5dac8913bd0686d4f5bd74b91cb7d07ba06df72b
Rename the Lane Status 1 register constants from LANE_STATUS1 to
LANE_STAT1, to use an abbreviation similar to that for Lane
Configuration registers (where we use LANE_CFGx instead of LANE_CONFIGx
or LANE_CONFIGURATIONx).
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Ie329d5a93615efe261802a2f027475b602a5c840
Rename the Miscellaneous Control register constants from MISC_REGx to
MISC_CTRLx.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I4d43bbda44b090de4ecf2d52cfc468f9683cc3b5
According to the functional specification, the register at offset 0x48
is called Idle Sync Enable, not Unit Control or some such.
Rename the constants.
Only bit 12 of this register is defined, all other bits are reserved.
But for some reason the code needs the default value of the other bits,
so we also rename constant UNIT_CTRL_DEFAULT_VALUE to
IDLE_SYNC_EN_DEFAULT_VALUE.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Ia4f80f945a8f31c190cd9a1875d50d892e72825f
Generation Settings registers have the same layout for different
generations and same setting (i.e. Generation 2 Settings 2 register has
the same layout as Generation 3 Settings 2).
So it does not make sense to prefix the constants for Settings 2 with
G3.
Instead change the prefixes to GSx_ for settings register x.
For Settings 2 of Gen 2 and Gen 3 we have some definitions in the first
and some in the second. Move them all to the first defined register (in
this case Gen 2, since the constant for Gen 1 is not defined because it
is not used).
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I15c337eb58aa37fd99fe388fd59373aa325a3a92
Sometimes we call the constants GENx_SET_y, sometimes GENx_SETTINGS_y,
and sometimes GENx_SETTING_y.
Unify this into GENx_SETy.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I3810fb52b2897fe6730ef6e58d434c47cfef14a9
COMPHY register addresses are defined twice
- once for indirect access, where the constants are of the form
COMPHY_<register_name>
- once for direct access, with constants of the form
<register_name>_ADDR
But sometimes the first case also has this _ADDR suffix (and other times
not).
Drop it from those places to unify how we define these registers.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Ibf95be8ade231d0e42258f40614a5f0974d280bd
Some register constants are defined with _REG suffix or REG_ prefix, but
others are not. Unify this by dropping these prefixes / suffixes.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I1ba331c0a4686093ee250bcaf3297349956ac9a8
The COMPHY_RESERVED_REG (offset 0x0E) is currently defined between
COMPHY_KVCO_CAL_CTRL (0x02) and COMPHY_DIG_LOOPBACK_EN (0x23).
But this register does not come from PHY lane register space. The
address 0x0E is not relative to PHY lane registers base address.
It only exists in the indirect register space, before PHY lane 2
registers (which start at address 0x200).
Move its definition in the header and add a comment.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Ie726384b980ace83d8ea327df09d928db74c2ab7
Move the definitions for the Miscellaneous Control 0 register (offset 0x4F),
to leave the registers sorted according to their offsets.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I9864be5bd00181d21c9334219be4f89c4f032c8b
The register name for the value PHY_GEN_USB3_5G is PHY_GEN_MAX. We
already define the mask constant as PHY_GEN_MAX_MASK. Thus also the
value name should be prefixed with PHY_GEN_MAX_.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Ibf72a66d2e65e240ed2cdbc3a301dbd793e2cb34
The register at offset 0x23 is called Digital Loopback Enable, but the
constant is COMPHY_LOOPBACK_REG0, as if there were some LOOPBACK_REG1
register or something, which there is not.
Rename the constant to COMPHY_DIG_LOOPBACK_EN.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Ie88bdd864e2c9ab7e8de70ed7f3a13ee8f08ff79
Currently reg_set() and reg_set16() are implemented via
mmio_clrsetbits_32(), meaning that first bits from mask are cleared,
then data bits are set.
But these function are used everywhere according to update semantics,
where only those bits that are in mask are allowed to be changed.
Example from phy-comphy-cp110.c
mask = HPIPE_RST_CLK_CTRL_PIPE_RST_MASK;
data = 0x1 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET;
/* Set PHY datapath width mode for V0 */
mask |= HPIPE_RST_CLK_CTRL_FIXED_PCLK_MASK;
data |= 0x0 << HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET;
/* Set Data bus width USB mode for V0 */
mask |= HPIPE_RST_CLK_CTRL_PIPE_WIDTH_MASK;
data |= 0x0 << HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET;
/* Set CORE_CLK output frequency for 250Mhz */
mask |= HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_MASK;
data |= 0x0 << HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET;
reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG, data, mask);
Change the implementation to update semantics by anding data with mask.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Ic72a8f64916274e08baef0b3f4c44a4fa07c1a6c
Currently reg_set() and reg_set16() are almost everywhere (both in
phy-comphy-3700.c and phy-comphy-cp110.c) used as if the semantics were
that of register update function (only bits that are set in mask are
updated):
reg_set(addr, data, mask) {
*addr = (*addr & ~mask) | (data & mask);
}
This comes both from names of arguments (data and mask), and from usage.
But both functions are in fact implemented via mmio_clrsetbits_32(), so
they actually first clear bits from mask and then set bits from data:
reg_set(addr, data, mask) {
*addr = (*addr & ~mask) | data;
}
There are only two places where this is leveraged (where some bits are
put into data argument but they are not put into the mask argument).
Fix those two usages to allow to convert the implementation from
clrsetbits semantics to update semantics.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Ib29a1dd7edcdee7a39c4752dbc9dfcd600d8cb5c
The comments about selector register values are wrong.
Bit 0 configures only lane 1, bit 4 only lane 0, and bit 8 lanes 0 and
2.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Iffe42374f92654ebe570557e0d462204439cfa31
Fix comment about COMPHY status register. PCIe/GbE0 PHY is on lane 1,
while USB3/GbE1 on lane 0.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I24734a61727d56f6eab2ed1c366d7a1810dbe19d
The current definitions of reference clock speed register values
#define PCIE_REF_CLOCK_SPEED_25M REF_CLOCK_SPEED_30M
#define USB3_REF_CLOCK_SPEED_25M REF_CLOCK_SPEED_30M
is ambiguous. The name of the constant implies 25 MHz, but the value
implies 30 MHz, which may make the reader think that the setting has
something to do with both values.
In reality, the values have different tables for SerDes and PCIe/USB3
PHY mode. The value for 25 MHz for PCIe/USB3 mode (0x2) is the value
for 30 MHz for SerDes mode.
Instead of defining the PCIe/USB3 constants relative to SerDes
constants, define them with absolute values, thus making it a little bit
more obvious that different modes have different value tables.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I50c66c6bbe22b9a9bec4685600cb8560524a643c
The MODE_REFDIV constant is only used as mask of the MODE_REFDIV
register, but we already have MODE_REFDIV_MASK constant for that.
Drop MODE_REFDIV.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Icabb32189a7ca1a857dcf86cf0846bd0335f75d0
Constants SD_SPEED_1_25_G and SD_SPEED_2_5_G refer to SerDes frequency,
which is 1.25x that of data rate, since 1000base-x and 2500base-x use
the 8b/10b encoding:
mode frequency data rate
1000base-x 1.25 GHz 1 Gbps
2500base-x 3.125 GHz 2.5 Gbps
But the first constant refers to the frequency, while the second to the
data rate, which does not make sense.
Since the values in the specification refer to frequency, change the
name of the constant SD_SPEED_2_5_G to SD_SPEED_3_125_G to also refer to
the frequency, as SD_SPEED_1_25_G does.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I7670b45fa685aff93b3cafd84cf30d93620d8da1
According to Functional Specification, the common PHY register at offset
0x3f is actually Generation 3 Setting 2, while the register at offset
0x112 is Generation 2 Setting 3.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I4626672cbee2d08da1da7839a3cf3f90e78fa101
According to Functional Specification, the register at bit 1 of PHY
Configuration 1 is called PIN_PU_IVREF, not PIN_PU_IVEREF. Fix this.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I912fa4a1956bf0b1b35a24925db03e3dbbe1adf3
When tf-a is built with the llvm toolchain, the compiler optimizes the
variable in some way which results in SCMI_MSG_GET_TOKEN assert failure
in multiple places. This patch makes the msg_header variable in
mailbox_mem struct volatile, which seems to fix the issue.
Signed-off-by: sahil <sahil@arm.com>
Change-Id: I1d28b30a6472fc23ed85adff9cf73dfb536e39cc
It doesn't look correct to use mbed TLS defines directly in the Event
Log driver as this driver may use another Crypto library in future.
Hence mbed TLS Crypto dependency on Event Log driver is removed by
introducing generic Crypto defines and uses those in the Event Log
driver to call Crypto functions.
Also, updated mbed TLS glue layer to map these generic Crypto defines
to mbed TLS library defines.
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ibc9c751f60cbce4d3f3cf049b7c53b3d05cc6735
As mpidr is unsigned long long, U should be ULL. We use macro to
fix this issue.
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Change-Id: I7dfd51a63f27f471794bcbf72ffff0c1a0598b46
Add a UART/USART driver for STM32 with complete a hardware support;
it used for STM32CubeProgrammer support with even parity.
This driver is not used for console, which is already handle
by a simple driver (drivers/st/uart/aarch32/stm32_console.S).
Change-Id: Ia9266e5d177fe7fd09c8a15b81da1a05b1bc8b2d
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
The PLL4 can be used by ROM code as the source clock of USB PHYC and,
in this case, the PLL4 configuration must be preserved
with pll4_preserve to avoid USB disturbance.
This patch also adds an error when the clock tree PLL4 configuration
is not the PLL4 configuration used by ROM code; this error allows to
detect a invalid clock tree.
This commit corrects the coverity issue 343023.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: I4bae9312a2db8dd342a38e649513d689b13976bb
Sometimes when changing UART clock from TBG to XTAL, UART HW enters into
some broken state. It does not transit characters from TX FIFO anymore
and TX FIFO stays always empty. TX FIFO reset does not recover UART HW
from this broken state.
Experiments show that external reset can fix UART HW from this broken
state.
TF-A fatal error handler calls console_a3700_core_init() function to
initialize UART HW. This handler may be called anytime during CPU
runtime, also when kernel is running.
U-Boot or Linux kernel may change UART clock to TBG to achieve higher
baudrates. During initialization, console_a3700_core_init() resets UART
configuration to default settings, which means that it also changes
UART clock from TBG to XTAL.
Do an external reset of UART via North Bridge Peripheral reset register
to prevent this UART hangup.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I8990bce24d1a6fd8ccc47a2cd0a5ff932fcfcf14
If TX FIFO is not empty, do not touch UART settings and let UART HW
transmit remaining bytes from TX FIFO. New UART settings are then set
only after TX FIFO is reset.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I2976c0a4fbb841d3a79d42ef67c06e70174afc3b
Followup changes will need function arguments in registers x0, x1 and
x2. Do not modify x1 and x2 registers and instead use scratch x3 and x4
registers for storing local variables.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I8551a802995f39128d2f4a8f8076b5bf463d0db0
Renamed a macro 'INVALID_ID' to 'EVLOG_INVALID_ID' to avoid its clash
with other macro names and to show it is explicitly used for Event
Log driver.
Change-Id: Ie4c92b3cd1366d9a59cd6f43221e24734865f427
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
The previous codes were using the cntpct_el0 to check the time
elapsed. But this physical timer does not seem to count for
the expected time resulting in gic fmu communication failures
on Tegra platforms.
This patch uses the delay_timer instead to use a platform
defined timer for calculating timeouts.
Change-Id: Ic8646ad1662c9928ac64c4152deb27e8c86fe344
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
sha 4ce3e99a3 introduced printf format specifiers for fixed width
types, which uses PRI*64 instead of "ll" for 64 bit values.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ic6811cc1788c698adde0807e5f8ab5290a900a26
Use long instead of long long on aarch64 for 64_t stdint types.
Introduce inttypes.h to properly support printf format specifiers for
fixed width types for such change.
Change-Id: I0bca594687a996fde0a9702d7a383055b99f10a1
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
* changes:
feat(arm_fpga): write UART baud base clock frequency into DTB
feat(arm_fpga): query PL011 to learn system frequency
refactor(arm_fpga): move command line code into separate function
fix(fdt): avoid output on missing DT property
feat(arm_fpga): add ITS autodetection
feat(arm_fpga): determine GICR base by probing
feat(gicv3): introduce GIC component identification
feat(libfdt): also allow changing base address
fix(arm_fpga): avoid re-linking from executable ELF file
Correctly handle USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION request
in USB driver and support a different result than
USB_DESC_TYPE_CONFIGURATION with the new optional ops
get_other_speed_config_desc().
The support of this descriptor is optionnal and is only
required when high-speed capable device which can operate at its
other possible speed.
This patch allows to remove the pbuf update in usb_core_get_desc()
and solves an issue on USB re-enumeration on STM32MP15 platform
as the result of get_config_desc() is a const array.
This issue is not see on normal use-case, as the USB enumeration
is only done in ROM code and TF-A reuse the same USB descritors.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I8edcc1e45065ab4e45d48f4bc37b49120674fdb0
Remove the unnecessary cast on the result of function which
already return the correct type.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: Ie21f7e78a880d30d1f31e32b3d2c3fb09489d65b
The GIC specification describes ID registers in each GIC register frame
(PIDRx), which can be used to identify a GIC component. The Arm Ltd. GIC
implementations use certain ID values to identify the distributor, the
redistributors and other parts like ITSes.
Introduce a function that reads those part number IDs, which are spread
over two registers. The actual numbers are only meaningful in connection
with a certain GIC model, which would need to be checked beforehand, by
the caller.
Change-Id: Ia6ff326a1e8b12664e4637bc8e2683d2b5c7721c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
CID 373791: Control flow issues (DEADCODE)
CID 373789: Control flow issues (DEADCODE)
Since USBD_EP_NB = 1 for DFU stack on STMP32MP15 platform (only EP0 is
required for DFU support) the value of num can't be different of 0
and the code can't be reached in usb_core_receive / usb_core_transmit.
Add a simple sub-function with this part of code.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I07a56909bb1e6de19ce52da7945b6d2916be8538
Correct the invalid test on NULL pointer pdev->class in
usb_core_set_config function.
This patch fix the coverity errors:
** CID 373790: Null pointer dereferences (FORWARD_NULL)
/drivers/usb/usb_device.c: 182 in usb_core_set_config()
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I83e43261bafa2d47f800e56df0b047a6c58a1e29
Add a device driver for Synopsis DWC2 USB IP of STM32MP15x,
this USB OTG device is only supported in device mode.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I90b21f094f6637b85f3ace23a3a3a2f6fd4e0951
Add a new USB framework to manage an USB device profile (USBD)
based on a peripheral controller driver (PCD).
This USB stack can be use to implement any Universal Serial Bus Device
Class in TF-A on top of a USB driver defined in the platform.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I7971ec6d952edec3511157a198e6e5359df4346b
Madhukar Pappireddy
Manish Pandey
Marek Behún
sah01
Manish V Badarkhe
Sandrine Bailleux
Ming Huang
Nicolas Le Bayon
Patrick Delaunay
Pali Rohár
anzhou
Scott Branden
André Przywara
Patrick Delaunay