on i.MX8MP A1 silicon, the OCRAM space is extended to 512K + 64K,
currently, OCRAM @0x960000-0x980000 is reserved for BL31, it will
leave the last 64KB in non-continuous space. To provide a continuous
384KB + 64KB space for generic use, so move the BL31 space to
0x970000-0x990000 range.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I96d572fc0f87f05a60f55e0552a68b6e70f8e7f4
the 'always_on' member should be initialized from 'on'.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I5746ff40075b4fcda2ac7d04a8d7f1269af17e91
* changes:
stm32mp1: enable PIE for BL32
stm32mp1: set BL sizes regardless of flags
Add PIE support for AARCH32
Avoid the use of linker *_SIZE__ macros
Added GPT parser support in BL2 for Arm platforms to get the entry
address and length of the FIP in the GPT image.
Also, increased BL2 maximum size for FVP platform to successfully
compile ROM-enabled build with this change.
Verified this change using a patch:
https://review.trustedfirmware.org/c/ci/tf-a-ci-scripts/+/9654
Change-Id: Ie8026db054966653b739a82d9ba106d283f534d0
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
NOTE: Breaking change to the way UUIDs are stored in the DT
Currently, UUIDs are stored in the device tree as
sequences of 4 integers. There is a mismatch in endianness
between the way UUIDs are represented in memory and the way
they are parsed from the device tree. As a result, we must either
store the UUIDs in little-endian format in the DT (which means
that they do not match up with their string representations)
or perform endianness conversion after parsing them.
Currently, TF-A chooses the second option, with unwieldy
endianness-conversion taking place after reading a UUID.
To fix this problem, and to make it convenient to copy and
paste UUIDs from other tools, change to store UUIDs in string
format, using a new wrapper function to parse them from the
device tree.
Change-Id: I38bd63c907be14e412f03ef0aab9dcabfba0eaa0
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Replaced PLAT_ARM_FIP_BASE and PLAT_ARM_FIP_MAX_SIZE macro with a
generic name PLAT_ARM_FLASH_IMAGE_BASE and PLAT_ARM_FLASH_IMAGE_MAX_SIZE
so that these macros can be reused in the subsequent GPT based support
changes.
Change-Id: I88fdbd53e1966578af4f1e8e9d5fef42c27b1173
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This new compile option is only for Armada 3720 Development Board. When
it is set to 1 then TF-A will setup PM wake up src configuration.
By default this new option is disabled as it is board specific and no
other A37xx board has PM wake up src configuration.
Currently neither upstream U-Boot nor upstream Linux kernel has wakeup
support for A37xx platforms, so having it disabled does not cause any
issue.
Prior this commit PM wake up src configuration specific for Armada 3720
Development Board was enabled for every A37xx board. After this change it
is enabled only when compiling with build flag A3720_DB_PM_WAKEUP_SRC=1
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I09fea1172c532df639acb3bb009cfde32d3c5766
Add board support for RD-N2 Cfg1 variant of RD-N2 platform. It is a
variant of RD-N2 platform with a reduced interconnect mesh size (3x3)
and core count (8-cores). Its platform variant id is 1.
Change-Id: I34ad35c5a5c1e9b69a658fb92ed00e5bc5fe72f3
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
A Neoverse reference design platform can have two or more variants that
differ in core count, cluster count or other peripherals. To allow reuse
of platform code across all the variants of a platform, introduce build
option CSS_SGI_PLATFORM_VARIANT for Arm Neoverse reference design
platforms. The range of allowed values for the build option is platform
specific. The recommended range is an interval of non negative integers.
An example usage of the build option is
make PLAT=rdn2 CSS_SGI_PLATFORM_VARIANT=1
Change-Id: Iaae79c0b4d0dc700521bf6e9b4979339eafe0359
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
This will help in keeping source file generic and conditional
compilation can be contained in platform provided dt files.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I3c6e0a429073f0afb412b9ba521ce43f880b57fe
sgm775 is an old platform and is no longer maintained by Arm and its
fast model FVP_CSS_SGM-775 is no longer available for download.
This platform is now superseded by Total Compute(tc) platforms.
This platform is now deprecated but the source will be kept for cooling
off period of 2 release cycle before removing it completely.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I8fe1fc3da0c508dba62ed4fc60cbc1642e0f7f2a
mt8195 also uses mt6359p RTC. Revice mt8192 RTC and share the
driver with mt8195.
Change-Id: I20c73f6e0af67ef9d4c3d4e0ff373f93950e07db
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
mt8195 also uses PMIC mt6359p. The only difference is the
pwrap register definition.
Change-Id: I9962263c46187d1344f14f857bf4b51e33aedda0
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Implement PSCI platform OPs to support CPU hotplug and MCDI.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Change-Id: I1321f7989c8a3d116d698768a7146e8f180ee9c0
Add MCDI related drivers to handle CPU powered on/off in CPU suspend.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Change-Id: I6a6f9bf5d1d8bda1ee603d8bf3fc206437de7ad8
The timer driver can be shared with mt8195. Move the the timer
driver to common/.
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Change-Id: I84c97ab9cc9b469f35e0f44dd8e7b2b95f1b3926
MT8192 cirq driver can be shared with MT8195. Move cirq driver to common
common folder.
Signed-off-by: gtk_pangao <gtk_pangao@mediatek.com>
Change-Id: Iba5cdcfd2116f0bd07e0497250f2da45613e3a4f
MT8192 GIC driver can be shared with MT8195. Move GIC driver to common
and do the initialization.
Signed-off-by: christine.zhu <christine.zhu@mediatek.corp-partner.google.com>
Change-Id: I63f3e668b5ca6df8bcf17b5cd4d53fa84f330fed
Upon recieving the interrupt send an SGI.
The sgi number is communicated by linux.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Change-Id: Ib8f07ff7132ba5ac202b546914efb16d04820ed3
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Add support for the trapping the IPI in TF-A.
Register handler for the irq no 62 which is the IPI interrupt.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Change-Id: I9c04fdae7be3dda6a34a9b196274c0b5fdf39223
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
* changes:
renesas: rzg: Add support to identify EK874 RZ/G2E board
drivers: renesas: common: watchdog: Add support for RZ/G2E
drivers: renesas: rzg: Add QoS support for RZ/G2E
drivers: renesas: rzg: Add PFC support for RZ/G2E
drivers: renesas: common: Add support for DRAM initialization on RZ/G2E SoC
renesas: rzg: Add support to identify HopeRun HiHope RZ/G2N board
drivers: renesas: common: emmc: Select eMMC channel for RZ/G2N SoC
drivers: renesas: rzg: Add QoS support for RZ/G2N
drivers: renesas: rzg: Add PFC support for RZ/G2N
drivers: renesas: common: Add support for DRAM initialization on RZ/G2N SoC
renesas: rzg: Add support to identify HopeRun HiHope RZ/G2H board
drivers: renesas: common: emmc: Select eMMC channel for RZ/G2H SoC
drivers: renesas: rzg: Add QoS support for RZ/G2H
drivers: renesas: rzg: Add PFC support for RZ/G2H
drivers: renesas: common: Add support for DRAM initialization on RZ/G2H SoC
drivers: renesas: rzg: Switch using common ddr code
drivers: renesas: ddr: Move to common
In order to prepare future support of FIP, BL32 (SP_min) is compiled
as Position Independent Executable.
Change-Id: I15e7cc433fb03e1833002f4fe2eaecb6ed42eb47
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
BL2 size is set to 100kB, and BL32 to 72kB, regardless of OP-TEE
or stack protector flags.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Id7411bd55a4140718d64a647d81037720615fc81
Counter frequency for generic timer of Arm-A53 based Application
Processing Unit(APU) is not configuring in case if First Stage Boot
Loader(FSBL) does not initialize counter frequency. This happens
when FSBL is running from Arm-R5 based Real-time Processing Unit(RPU).
Because of that generic timer driver functionality is not working.
So configure counter frequency during initialization.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: Icfccd59d7d2340fba25ebfb2ef6a813af4290896
Add support for CRC checksum for IPI data when the macro
IPI_CRC_CHECK is enabled.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I3c25c715885759076055c6505471339b5d6edcd5
Rename the macro ZYNQMP_IPI_CRC_CHECK to IPI_CRC_CHECK and
move the related defines to the common include.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I6d30b081ac607572a0b23e10ca8031bc90489e58
ELP processors can sometimes have different MIDR values or features so
we are adding the "_arm" suffix to differentiate the reference
implementation from other future versions.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ieea444288587c7c18a397d279ee4b22b7ad79e20
Add support to identify Silicon Linux RZ/G2E evaluation kit (EK874).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: Id7bdbc9b0d25aa9af496d58d4bd5055579edc104
DRAM initialization on RZ/G2E SoC is identical to R-Car E3 so re-use the
same.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: I454fb40af4f8ce6c4c0d2a53edb307326efd02df
Add support for initializing DRAM on RZ/G2N SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: Id09a367b92b11a5da88f2dce6887677cc935d0c0
Add support for initializing DRAM on RZ/G2H SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: Iae23f1093f65a9efd065d37b7d6e9340ff6350b9
Switch using common ddr driver code from renesas/common/ddr directory
for RZ/G2M SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: I807dcb0bc5186bd32bc1c577945d28634bb10e1f
Move ddr driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: I9aef73d3e9a027a127ce7483b72d339559866727
By default the Arm Ethos-N NPU will boot up in secure mode. In this mode
the non-secure world cannot access the registers needed to use the NPU.
To still allow the non-secure world to use the NPU, a SiP service has
been added that can delegate non-secure access to the registers needed
to use it.
Only the HW_CONFIG for the Arm Juno platform has been updated to include
the device tree for the NPU and the platform currently only loads the
HW_CONFIG in AArch64 builds.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I65dfd864042ed43faae0a259dcf319cbadb5f3d2
To make it possible to use the hw_config device tree for dynamic
configuration in BL31 on the Arm Juno platform. A placeholder hw_config
has been added that is included in the FIP and a Juno specific BL31
setup has been added to populate fconf with the hw_config.
Juno's BL2 setup has been updated to align it with the new behavior
implemented in the Arm FVP platform, where fw_config is passed in arg1
to BL31 instead of soc_fw_config. The BL31 setup is expected to use the
fw_config passed in arg1 to find the hw_config.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: Ib3570faa6714f92ab8451e8f1e59779dcf19c0b6
Subversion is not reflecting the Marvell sources variant anymore.
This patch removes version.mk from Marvell plafroms.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Change-Id: I8f3afbe3fab3a38da68876f77455f449f5fe0179
Move efuse definitions to a separate header file for later
usage with other FW modules.
Change-Id: I2e9465f760d0388c8e5863bc64a4cdc57de2417f
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/47313
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Yi Guo <yi.guo@cavium.com>
Use single 64b register for the return value instead of two 32b.
Report an error if caller requested larger than than 64b random
number in a single SMC call.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Change-Id: Ib8756cd3c0808b78c359f90c6f6913f7d16ac360
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/33280
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
This patch forces rx training on 10G ports
as part of comphy_smc call from Linux.
Signed-off-by: Alex Evraev <alexev@marvell.com>
Change-Id: Iebe6ea7c8b21cbdce5c466c8a69b92e9d7c8a8ca
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/30763
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Normally the CP MSS CPU was started at the end of FW load to IRAM at BL2.
However, (especailly in secure boot mode), some bus attributes should be
changed from defaults before the MSS CPU tries to access shared resources.
This patch starts to use CP MSS SRAM for FW load in both secure and
non-secure boot modes.
The FW loader inserts a magic number into MSS SRAM as an indicator of
successfully loaded FS during the BL2 stage and skips releasing the MSS
CPU from the reset state.
Then, at BL31 stage, the MSS CPU is released from reset following the
call to cp110_init function that handles all the required bus attributes
configurations.
Change-Id: Idcf81cc350a086835abed365154051dd79f1ce2e
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/46890
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Fixed a bug that the actually bit number was used as a mask to
select LD0 or LD1 fuse
Signed-off-by: Guo Yi <yguo@cavium.com>
Change-Id: I4bec268c3dc2566350b4a73f655bce222707e25b
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/46146
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Setting MSS_SUPPORT to 0 also removes requirement for SCP_BL2
definition.
Images build with MSS_SUPPORT=0 will not include service CPUs
FW and will not support PM, FC and other features implemented
in these FW images.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Change-Id: Idf301ebd218ce65a60f277f3876d0aeb6c72f105
Reviewed-on: https://sj1git1.cavium.com/c/IP/SW/boot/atf/+/37769
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Ofer Heifetz <oferh@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Since the dfx register set is going to be marked as secure expose dfx
secure read and write function via SiP services. In introduced misc_dfx
driver some registers are white-listed so non-secure software can still
access them.
This will allow non-secure word drivers access some white-listed
registers related to e.g.: Sample at reset, efuses, SoC type and
revision ID accesses.
Change-Id: If9ae2da51ab2e6ca62b9a2c940819259bf25edc0
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-on: https://sj1git1.cavium.com/25055
Tested-by: Kostya Porotchkin <kostap@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Since more drivers which uses dfx register set need to be handled with
use of SiP services, use dedicated and more meaningful name for thermal
SiP services.
Change-Id: Ic2ac27535a4902477df8edc4c86df3e34cb2344f
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-on: https://sj1git1.cavium.com/25054
Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com>
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Since the dfx register set is going to be marked as secure (in order to
protect efuse registers for non secure access), accessing thermal
registers which are part of dfx register set, will not be possible from
lower exception levels. Due to above expose thermal driver as a SiP
service. This will allow Linux and U-Boot thermal driver to initialise
and perform various operations on thermal sensor.
The thermal sensor driver is based on Linux
drivers/thermal/armada_thermal.c.
Change-Id: I4763a3bf5c43750c724c86b1dcadad3cb729e93e
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-on: https://sj1git1.cavium.com/20581
Reviewed-by: Kostya Porotchkin <kostap@marvell.com>
Tested-by: Kostya Porotchkin <kostap@marvell.com>
Remove an incorrect tabulation in front of an $(error) function call
outside of a recipe, which caused the following text to be displayed:
plat/arm/board/common/board_common.mk:36: *** recipe commences before first target. Stop.
instead of:
plat/arm/board/common/board_common.mk:36: *** "Unsupported ARM_ROTPK_LOCATION value". Stop.
Change-Id: I8592948e7de8ab0c4abbc56eb65a53eb1875a83c
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
UART register definition is the same on MediaTek platforms.
Move uart.h to common folder and remove the duplicate file.
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Change-Id: Iea0931dfd606ae4a7ab475b9cb3a08dc6de68b36
The number of ITS have changed from 4 to 1, resulting
in GICR base address change.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: I28101f0d1faf9f3c58591b642033c3fd49a275e7
Add support to qemu "max" cpu for both "qemu" ('virt') and
"qemu_sbsa" ('sbsa-ref') platforms.
Change-Id: I36e45c0a3c4e30ba546d2a3cb44dfef11a680305
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Cortex-A72 support is already enabled for sbsa-ref platform,
so add it also to virt platform for parity.
Change-Id: Ib0a2ce81ef7c0a71ef8dc66dbec179191bf2e6cc
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
The build now gives deprecation warnings for including
drivers/arm/gic/common/gic_common.c directly. Move to including the
common gicv2 sources via gicv2.mk instead - which also matches the
pattern already used for gicv3.
Change-Id: I5332fb52c5801272e5e2bb6111f96087b4894325
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
NT_FW_CONFIG file is meant to be passed from BL31 to be consumed by
BL33, fvp platforms use this to pass measured boot configuration and
the x0 register is used to pass the base address of it.
In case of hafnium used as hypervisor in normal world, hypervisor
manifest is expected to be passed from BL31 and its base address is
passed in x0 register.
As only one of NT_FW_CONFIG or hypervisor manifest base address can be
passed in x0 register and also measured boot is not required for SPM so
disable passing NT_FW_CONFIG.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ifad9d3658f55ba7d70f468a88997d5272339e53e
Create a dedicated static struct mmc_device_info mmc_info mmc_info
instead of having this in stack.
A boot issue has been seen on some platform when applying patch [1].
[1] 13f3c5166f ("mmc:prevent accessing to the released space in case of wrong usage")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I73a079715253699d903721c865d6470d58f6bd30
Create a dedicated static struct mmc_device_info mmc_info mmc_info
instead of having this in stack.
A boot issue has been seen on some platform when applying patch [1].
[1] 13f3c5166f ("mmc:prevent accessing to the released space in case of wrong usage")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Id52c0be61a30f453a551385883eaf3cbe32b04b9
Create a dedicated static struct mmc_device_info mmc_info mmc_info
instead of having this in stack.
A boot issue has been seen on some platform when applying patch [1].
[1] 13f3c5166f ("mmc:prevent accessing to the released space in case of wrong usage")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: If5db8857cccec2e677b16a38eb3eeb41628a264c
Refine the function plat_add_sp_images_load_info() by saving the
previous node and only setting its next link when the current node is
valid. This can reduce the check for the next node and simply the
total logic.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I4061428bf49ef0c3816ac22aaeb2e50315531f88
The traverse flow in function plat_add_sp_images_load_info() will find
the last node in the main load info list, with its
next_load_info==NULL. However this node is still useful and should not
be overridden with SP node info.
The bug will cause below error on RDN2 for spmd enabled:
ERROR: Invalid NT_FW_CONFIG DTB passed
Fix the bug by only setting the next_load_info of the last node in the
original main node list.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: Icaee5da1f2d53b29fdd6085a8cc507446186fd57
As per the new multi-console framework, updating the JTAG DCC support.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I77994ce387caf0d695986df3d01d414a920978d0
As per the new multi-console framework, updating the JTAG DCC support.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I62cfbb57ae7e454fbc91d1c54aafa6e99f9a35c8
* changes:
plat/sgi: allow usage of secure partions on rdn2 platform
board/rdv1mc: initialize tzc400 controllers
plat/sgi: allow access to TZC controller on all chips
plat/sgi: define memory regions for multi-chip platforms
plat/sgi: allow access to nor2 flash and system registers from s-el0
plat/sgi: define default list of memory regions for dmc620 tzc
plat/sgi: improve macros defining cper buffer memory region
plat/sgi: refactor DMC-620 error handling SMC function id
plat/sgi: refactor SDEI specific macros
Add the secure partition mmap table and the secure partition boot
information to support secure partitions on RD-N2 platform. In addition
to this, add the required memory region mapping for accessing the
SoC peripherals from the secure partition.
Signed-off-by: Omkar Anand Kulkarni <omkar.kulkarni@arm.com>
Change-Id: I2c75760d6c8c3da3ff4885599be420e924aeaf3c
A TZC400 controller is placed inline on DRAM channels and regulates
the secure and non-secure accesses to both secure and non-secure
regions of the DRAM memory. Configure each of the TZC controllers
across the Chips.
For use by secure software, configure the first chip's trustzone
controller to protect the upper 16MB of the memory of the first DRAM
block for secure accesses only. The other regions are configured for
non-secure read write access. For all the remote chips, all the DRAM
regions are allowed for non-secure read and write access.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I809f27eccadfc23ea0ef64e2fd87f95eb8f195c1
On a multi-chip platform, the boot CPU on the first chip programs the
TZC controllers on all the remote chips. Define a memory region map for
the TZC controllers for all the remote chips and include it in the BL2
memory map table.
In addition to this, for SPM_MM enabled multi-chip platforms, increase
the number of mmap entries and xlat table counts for EL3 execution
context as well because the shared RAM regions and GIC address space of
remote chips are accessed.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I6f0b5fd22f9f28046451e382eef7f1f9258d88f7
For multi-chip platforms, add a macro to define the memory regions on
chip numbers >1 and its associated access permissions. These memory
regions are marked with non-secure access.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: If3d6180fd8ea61f45147c39d3140d694abf06617
Allow the access of system registers and nor2 flash memory region
from s-el0. This allows the secure parititions residing at s-el0
to access these memory regions.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I3887a86770de806323fbde0d20fdc96eec6e0c3c
Define a default DMC-620 TZC memory region configuration and use it to
specify the TZC memory regions on sgi575, rdn1edge and rde1edge
platforms. The default DMC-620 TZC memory regions are defined
considering the support for secure paritition as well.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: Iedee3e57d0d3de5b65321444da51ec990d3702db
Remove the 'ARM_' prefix from the macros defining the CPER buffer memory
and replace it with 'CSS_SGI_' prefix. These macros are applicable only
for platforms supported within plat/sgi. In addition to this, ensure
that these macros are defined only if the RAS_EXTENSION build option is
enabled.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I44df42cded18d9d3a4cb13e5c990e9ab3194daee
The macros defining the SMC function ids for DMC-620 error handling are
listed in the sgi_base_platform_def.h header file. But these macros are
not applicable for all platforms supported under plat/sgi. So move these
macro definitions to sgi_ras.c file in which these are consumed. While
at it, remove the AArch32 and error injection function ids as these are
unused.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I249b54bf4c1b1694188a1e3b297345b942f16bc9
The macros specific to SDEI defined in the sgi_base_platform_def.h are
not applicable for all the platforms supported by plat/sgi. So refactor
the SDEI specific macros into a new header file and include this file on
only on platforms it is applicable on.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I0cb7125334f02a21cae1837cdfd765c16ab50bf5
Broadcom I2C controller driver. Follwoing API's are supported:-
- i2c_init() Intialize ethe I2C controller
- i2c_probe()
- i2c_set_bus_speed() Set the I2C bus speed
- i2c_get_bus_speed() Get the current bus speed
- i2c_recv_byte() Receive one byte of data.
- i2c_send_byte() Send one byteof data
- i2c_read_byte() Read single byte of data
- i2c_read() Read multiple bytes of data
- i2c_write_byte Write single byte of data
- i2c_write() Write multiple bytes of data
This driver is verified by reading the DDR SPD data.
Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com>
Change-Id: I2d7fe53950e8b12fab19d0293020523ff8b74e13
When the BL31 for the Allwinner H616 runs in DRAM, we need to make sure
we tell the non-secure world about the memory region it uses.
Add a reserved-memory node to the DT, which covers the area that BL31
could occupy. The "no-map" property will prevent OSes from mapping
the area, so there would be no speculative accesses.
Change-Id: I808f3e1a8089da53bbe4fc6435a808e9159831e1
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
ENABLE_PIE (position independent executable) is default on K3
platform to handle variant RAM configurations in the system. This,
unfortunately does cause confusion while reading the code, so, lets
make things explicit by selecting 0x0 as the "SEC_SRAM_BASE" out of
which we compute the BL31_BASE depending on usage.
Lets also document a warning while at it to help folks copying code
over to a custom K3 platform and optimizing size by disabling PIE to
modify the defaults.
Signed-off-by: Nishanth Menon <nm@ti.com>
Change-Id: I8e67a9210e907e266ff6a78ba4d02e3259bb2b21
Lets cast our macros to the right types and reduce a few MISRA
warnings.
Signed-off-by: Nishanth Menon <nm@ti.com>
Change-Id: I0dc06072713fe7c9440eca0635094c5f3ceb7f1c
We compute BL31_END - BL31_START on the fly, which is basically
BL31_SIZE. Lets just use the BL31_SIZE directly so that we dont
complicate PIE relocations when actual address is +ve and -ve offsets
relative to link address.
Signed-off-by: Nishanth Menon <nm@ti.com>
Change-Id: I5e14906381d2d059163800d39798eb39c42da4ec
Since we are using static xlat tables, we need to account for exact
count of table entries we are actually using.
peripherals usart, gic, gtc, sec_proxy_rt, scfg and data account for 6 entries
and are constant, however, we also need to account for:
bl31 full range, codebase, ro_data as additional 3 region
With USE_COHERENT_MEM we do add in 1 extra region as well.
This implies that we will have upto 9 or 10 regions based on
USE_COHERENT_MEM usage. Vs we currently define 8 regions.
This gets exposed with DEBUG=1 and assert checks trigger, which for some
reason completely escaped testing previously.
ASSERT: lib/xlat_tables_v2/xlat_tables_core.c:97
BACKTRACE: START: assert
Signed-off-by: Nishanth Menon <nm@ti.com>
Change-Id: I962cdfc779b4eb3b914fe1c46023d50bc289e6bc
We actually have additional table entries than what we accounted for in
our size. MAX_XLAT_TABLES is 8, but really we could be using upto 10
depending on the platform. So, we need an extra 8K space in.
This gets exposed with DEBUG=1 and assert checks trigger, which for some
reason completely escaped testing previously.
ASSERT: lib/xlat_tables_v2/xlat_tables_core.c:97
BACKTRACE: START: assert
Signed-off-by: Nishanth Menon <nm@ti.com>
Change-Id: I5c5d04440ef1fccfaf2317066f3abbc0ec645903
The new Allwinner H616 SoC lacks the management controller and the secure
SRAM A2, so we need to tweak the memory map quite substantially:
We run BL31 in DRAM. Since the DRAM starts at 1GB, we cannot use our
compressed virtual address space (max 256MB) anymore, so we revert to
the full 32bit VA space and use a flat mapping throughout all of it.
The missing controller also means we need to always use the native PSCI
ops, using the CPUIDLE hardware, as SCPI and suspend depend on the ARISC.
Change-Id: I77169b452cb7f5dc2ef734f3fc6e5d931749141d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
In preparation for changing the memory map, express the locations of the
various code and data pieces more dynamically, allowing SoCs to override
the memmap later.
Also prepare for the SCP region to become optional.
No functional change.
Change-Id: I7ac01e309be2f23bde2ac2050d8d5b5e3d6efea2
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The code to power the current core off when SCPI is not available is now
different for the two supported SoC families.
To make adding new platforms easier, move sunxi_cpu_power_off_self()
into the SoC directory, so we don't need to carry definitions for both
methods for all SoCs.
On the H6 we just need to trigger the CPUIDLE hardware, so can get rid
of all the code to program the ARISC, which is now only needed for the
A64 version.
Change-Id: Id2a1ac7dcb375e2fd021b441575ce86b4d7edf2c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
For the existing SoCs we support, we use SEPARATE_NOBITS_REGION, to move
some parts of the data into separate memory regions (to save on the SRAM
A2 we are loaded into).
For the upcoming H616 platform this is of no concern (we run in DRAM),
so make this flag a platform choice instead.
Change-Id: Ic01d49578c6274660f8f112bd23680d3eca3be7a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The upcoming refactoring to support the new H616 SoCs will push the A64
build over the edge, by using more than the 48KB of SRAM available.
To reduce the code size, set some libfdt options that aim to reduce
sanity checks (for saving code space):
- ASSUME_LATEST: only allow v17 DTBs (as created by dtc)
- ASSUME_NO_ROLLBACK: don't prepare for failed DT additions
- ASSUME_LIBFDT_ORDER: assume sane ordering, as done by dtc
Change-Id: I12c93ec09e7587c5ae71e54947f817c32ce5fd6d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* changes:
nxp lx2160a-aqds: new plat based on soc lx2160a
NXP lx2160a-rdb: new plat based on SoC lx2160a
nxp lx2162aqds: new plat based on soc lx2160a
nxp: errata handling at soc level for lx2160a
nxp: make file for loading additional ddr image
nxp: adding support of soc lx2160a
nxp: deflt hdr files for soc & their platforms
nxp: platform files for bl2 and bl31 setup
nxp: warm reset support to retain ddr content
nxp: nv storage api on platforms
nxp: supports two mode of trusted board boot
nxp: fip-handler for additional fip_fuse.bin
nxp: fip-handler for additional ddr-fip.bin
nxp: image loader for loading fip image
nxp: svp & sip smc handling
nxp: psci platform functions used by lib/psci
nxp: helper function used by plat & common code
nxp: add data handler used by bl31
nxp: adding the driver.mk file
nxp-tool: for creating pbl file from bl2
nxp: adding the smmu driver
nxp: cot using nxp internal and mbedtls
nxp:driver for crypto h/w accelerator caam
nxp:add driver support for sd and emmc
nxp:add qspi driver
nxp: add flexspi driver support
nxp: adding gic apis for nxp soc
nxp: gpio driver support
nxp: added csu driver
nxp: driver pmu for nxp soc
nxp: ddr driver enablement for nxp layerscape soc
nxp: i2c driver support.
NXP: Driver for NXP Security Monitor
NXP: SFP driver support for NXP SoC
NXP: Interconnect API based on ARM CCN-CCI driver
NXP: TZC API to configure ddr region
NXP: Timer API added to enable ARM generic timer
nxp: add dcfg driver
nxp:add console driver for nxp platform
tools: add mechanism to allow platform specific image UUID
tbbr-cot: conditional definition for the macro
tbbr-cot: fix the issue of compiling time define
cert_create: updated tool for platform defined certs, keys & extensions
tbbr-tools: enable override TRUSTED_KEY_CERT
SoC erratas are handled as part of this commit.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I06f7594d19cc7fc89fe036a8a255300458cb36dd
- NXP SoC lx2160a needs additional ddr_fip.bin.
- There are three types of ddr image that can be created:
-- ddr_fip.mk for creating fip_ddr.bin image for normal boot.
-- ddr_fip_sb.mk for creating fip_ddr_sec.bin image for NXP CSF based
CoT/secure boot.
-- ddr_fip_tbbr.mk for creating fip_ddr_sec.bin image for MBEDTLS
CoT/secure boot.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I24bff8d489f72da99f64cb79b2114faa9423ce8c
* NXP SoC is 16 A-72 core SoC.
* SoC specific defines are defined in:
- soc.def
- soc.h
* Called for BL2 and BL31 setup, SoC specific setup are implemented in:
- soc.c
* platform specific helper functions implemented at:
- aarch64/lx2160a_helpers.S
* platform specific functions used by 'plat/nxp/commpon/psci',
etc. are implemented at:
- aarch64/lx2160a.S
* platform specific implementation for handling PSCI_SYSTEM_RESET2:
- aarch64/lx2160a_warm_rst.S
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ib40086f9d9079ed9b22967baff518c6df9f408b8
For NXP platforms:
- Setup files for BL2 and BL31
- Other supporting files.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I36a1183a0652701bdede9e02d41eb976accbb017
NXP: Added warm reset handler to handle SMC PSCI_SYSTEM_RESET2
raised from kernel (> 5.4).
As part of first cold boot, DDR training data is stored in NV storage.
As part of this SMC handling, following things are done:
- DDR is put in self-refresh mode to retain the content of DDR.
- Reset cause is saved.
- Reset is triggered.
On next boot to last warm-reset, DDR training is restored from
the NV storage.
Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I8e4fb0824887af49e959c93825e2ab0ba887fc9d
NV storage API(s) for NXP platforms, supported on:
- flexspi-nor
- SecMon - General Purpose Registers at Low-Power section,
retains their content if backed by coined battery.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Id65dee4f28e7d6d2024407030039de33ebe0fa05
NXP SoC supports two TBB mode:
- MBED_TLS based
-- ROTK key hash is placed as part of the BL2 binary at section:
--- .rodata.nxp_rotpk_hash
-- Supporting non-volatile counter via SFP.
-- platform function used by TFA common authentication code.
- NXP CSF based
-- ROTK key deployment vary from MBEDTLS
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ib0f0bf024fd93de906c5d4f609383ae9e02b2fbc
All of the NXP SoC, needs fip_fuse image to be
loaded additionally as part of preparation for Trusted board boot
- fip_fuse.bin contains an image for auto fuse provisioning.
- Auto fuse provisioning is based on the input file with values for:
-- SRK Hash
-- OTPMK
-- misc. refer board manual for more details.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I26d4024fefe352d967ca120191f784f1f47aa9d1
Few of the NXP SoC like LX2160A, needs ddr-phy images to be
loaded additionally before DDR initialization
- fip_ddr.bin is created containing upto 6 ddr images.
- With TRUSTED_BOARD_BOOT = 1, fip_ddr.bin is authenticated
first before loading and starting DDR initialization.
- To successfully compile this image, platform-defined header files
needs to be defined:
-- include/common/tbbr/tbbr_img_def.h uses:
--- plat_tbbr_img_def.h: platform specific new FIP image macros.
-- include/tools/share/firmware_image_package.h uses:
--- plat_def_fip_uuid.h: platform specific new UUID macros.
---- Added UUID for DDR images to create FIP-DDR.
---- Added UUID for FUSE provisioning images to create FIP-fuse.
-- include/tools/share/tbbr_oid.h uses:
--- platform_oid.h: platform specific new OID macros.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Icbcf1673a8c398aae98680b5016f4276b4864b91
function load_img(), is dependent on:
- Recursively calling load_image() defined in common/bl_common.c
- for each image in the fip.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I57ca4b666cd1b0b992b7c0fc2a4260b558c0e2a9
bl31-data file written in assembly helps to manage data at bl31.
Signed-off-by: rocket <rod.dorris@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Ic3ace03364648cc1174bb05b5b334b9ccdaaa4ed
This works even on SoCs that do not have an ARISC, and it avoids
clobbering whatever ARISC firmware might be running.
Change-Id: I9f2fed597189bb387de79e8e76a7da3375e1ee91
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Adds bl2 with FIP to the build required for mbed Linux booting where
we do:
BootROM -> SPL -> BL2 -> OPTEE -> u-boot
If NEED_BL2 is specified then BL2 will be built and BL31 will have
its address range modified upwards to accommodate. BL31 must be
loaded from a FIP in this case.
If NEED_BL2 is not specified then the current BL31 boot flow is
unaffected and u-boot SPL will load and execute BL31 directly.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I655343b3b689b1fc57cfbedda4d3dc2fbd549a96
This patch enables Trusted Boot on the i.MX8MM with BL2 doing image
verification from a FIP prior to hand-over to BL31.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I3c22783a5c49544d0bace8ef3724784b9b7cc64a
Adds a number of definitions consistent with the established WaRP7
equivalents specifying number of io_handles and block devices.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: If1d7ef1ad3ac3dfc860f949392c7534ce8d206e3
Allows for exporting of FIP related methods cleanly in a private header.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I8523f1370312ed22ff7ca710cd916be52f725e3c
Manish Pandey
Jacky Bai
Yann Gautier
Olivier Deprez
Manish V Badarkhe
Mark Dykes
David Horstmann
Pali Rohár
Aditya Angadi
Yidi Lin
mtk20895
James Liao
gtk_pangao
christine.zhu
Venkatesh Yadav Abbarapu
Shubhrajyoti Datta
Madhukar Pappireddy
bipin.ravi
Rajan Vaja
johpow01
Lad Prabhakar
Mikael Olsson
Konstantin Porotchkin
Alex Evraev
Guo Yi
Grzegorz Jaszczyk
Alex Leibovich
Nina Wu
Sandrine Bailleux
Usama Arif
Leif Lindholm
Heyi Guo
André Przywara
Omkar Anand Kulkarni
Thomas Abraham
Bharat Gooty
Nishanth Menon
Joanna Farley
Pankaj Gupta
Samuel Holland
Ying-Chun Liu (PaulLiu)