The SHA256 DMA driver can be used by multiple SoCs. Move it to the
common directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: I96319eeeeeebd503ef0dcb07c0e4ff6a67afeaa5
Meson is the internal code name for the SoC family. The correct name for
the platform should be Amlogic. Change the name of the platform
directory.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Icc140e1ea137f12117acbf64c7dcb1a8b66b345d
The #include "mbedtls/check_config.h" directive first searches for
the header in the relative path to mbedtls_config.h, i.e.
include/drivers/auth/mbedtls/mbedtls/check_config.h
Obviously, it does not exist since check_config.h is located in
the mbedtls project.
It is more sensible to use #include <...> form.
Change-Id: If72a71381f84e7748a2c9f07dd1176559d9bb1d2
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If the max-frequency property is provided in the device tree mmc node,
it should be managed. The max allowed frequency will be the min between
this property value and what the card can support.
Change-Id: I885b676c3300d2670a0fe4c6ecab87758b5893ad
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Introduce driver for STM32 IWDG peripheral (Independent Watchdog).
It is configured according to device tree content and should be enabled
from there.
The watchdog is not started by default. It can be started after an HW
reset if the dedicated OTP is fused.
The watchdog also needs to be frozen if a debugger is attached.
This is done by configuring the correct bits in DBGMCU.
This configuration is allowed by checking BSEC properties.
An increase of BL2 size is also required when adding this new code.
Change-Id: Ide7535d717885ce2f9c387cf17afd8b5607f3e7f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
This patch fixes an issue when secure world timing information
can be leaked because Secure Cycle Counter is not disabled.
For ARMv8.5 the counter gets disabled by setting MDCR_El3.SCCD
bit on CPU cold/warm boot.
For the earlier architectures PMCR_EL0 register is saved/restored
on secure world entry/exit from/to Non-secure state, and cycle
counting gets disabled by setting PMCR_EL0.DP bit.
'include\aarch64\arch.h' header file was tided up and new
ARMv8.5-PMU related definitions were added.
Change-Id: I6f56db6bc77504634a352388990ad925a69ebbfa
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Currently, console drivers prepend '\r' to '\n' by themselves. This is
common enough to be supported in the framework.
Add a new flag, CONSOLE_FLAG_TRANSLATE_CRLF. A driver can set this
flag to ask the framework to transform LF into CRLF instead of doing
it by itself.
Change-Id: I4f5c5887591bc0a8749a105abe62b6562eaf503b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This patch fixes FVP_Base_AEMv8A model hang issue with
ARMv8.4+ with cache modelling enabled configuration.
Incorrect L1 cache flush operation to PoU, using CLIDR_EL1
LoUIS field, which is required by the architecture to be
zero for ARMv8.4-A with ARMv8.4-S2FWB feature is replaced
with L1 to L2 and L2 to L3 (if L3 is present) cache flushes.
FVP_Base_AEMv8A model can be configured with L3 enabled by
setting `cluster0.l3cache-size` and `cluster1.l3cache-size`
to non-zero values, and presence of L3 is checked in
`aem_generic_core_pwr_dwn` function by reading
CLIDR_EL1.Ctype3 field value.
Change-Id: If3de3d4eb5ed409e5b4ccdbc2fe6d5a01894a9af
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
This patch modifies crash reporting for AArch64 to provide
aligned output of register dump and GIC registers.
Change-Id: I8743bf1d2d6d56086e735df43785ef28051c5fc3
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
NOTE: AARCH32/AARCH64 macros are now deprecated in favor of __aarch64__.
All common C compilers pre-define the same macros to signal which
architecture the code is being compiled for: __arm__ for AArch32 (or
earlier versions) and __aarch64__ for AArch64. There's no need for TF-A
to define its own custom macros for this. In order to unify code with
the export headers (which use __aarch64__ to avoid another dependency),
let's deprecate the AARCH32 and AARCH64 macros and switch the code base
over to the pre-defined standard macro. (Since it is somewhat
unintuitive that __arm__ only means AArch32, let's standardize on only
using __aarch64__.)
Change-Id: Ic77de4b052297d77f38fc95f95f65a8ee70cf200
Signed-off-by: Julius Werner <jwerner@chromium.org>
NOTE: __ASSEMBLY__ macro is now deprecated in favor of __ASSEMBLER__.
All common C compilers predefine a macro called __ASSEMBLER__ when
preprocessing a .S file. There is no reason for TF-A to define it's own
__ASSEMBLY__ macro for this purpose instead. To unify code with the
export headers (which use __ASSEMBLER__ to avoid one extra dependency),
let's deprecate __ASSEMBLY__ and switch the code base over to the
predefined standard.
Change-Id: Id7d0ec8cf330195da80499c68562b65cb5ab7417
Signed-off-by: Julius Werner <jwerner@chromium.org>
Add support for multiple Cryptocell revisions which
use different APIs.
This commit only refactors the existing code in preperation to the addition
of another Cryptocell revisions later on.
Signed-off-by: Gilad Ben-Yossef <gilad.benyossef@arm.com>
Change-Id: I16d80b31afb6edd56dc645fee5ea619cc74f09b6
Code using Cryptocell specific APIs was used as part of the
arm common board ROT support, instead of being abstracted
in Cryptocell specific driver code, creating two problems:
- Any none arm board that uses Cryptocell wuld need to
copy and paste the same code.
- Inability to cleanly support multiple versions of Cryptocell
API and products.
Move over Cryptocell specific API calls into the Cryptocell
driver, creating abstraction API where needed.
Signed-off-by: Gilad Ben-Yossef <gilad.benyossef@arm.com>
Change-Id: I9e03ddce90fcc47cfdc747098bece86dbd11c58e
* changes:
plat/mediatek/mt81*: Use new bl31_params_parse() helper
plat/rockchip: Use new bl31_params_parse_helper()
Add helper to parse BL31 parameters (both versions)
Factor out cross-BL API into export headers suitable for 3rd party code
Use explicit-width data types in AAPCS parameter structs
plat/rockchip: Switch to use new common BL aux parameter library
Introduce lightweight BL platform parameter library
This patch introduces an additional precautionary step to further
enhance protection against variant 4. During the context initialisation
before we enter the various BL stages, the SPSR.SSBS bit is explicitly
set to zero. As such, speculative loads/stores are by default disabled
for all BL stages when they start executing. Subsequently, each BL
stage, can choose to enable speculative loads/stores or keep them
disabled.
This change doesn't affect the initial execution context of BL33 which
is totally platform dependent and, thus, it is intentionally left up to
each platform to initialise.
For Arm platforms, SPSR.SSBS is set to zero for BL33 too. This means
that, for Arm platforms, all BL stages start with speculative
loads/stores disabled.
Change-Id: Ie47d39c391d3f20fc2852fc59dbd336f8cacdd6c
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
BL31 used to take a single bl31_params_t parameter structure with entry
point information in arg0. In commit 726002263 (Add new version of image
loading.) this API was changed to a more flexible linked list approach,
and the old parameter structure was copied into all platforms that still
used the old format. This duplicated code unnecessarily among all these
platforms.
This patch adds a helper function that platforms can optionally link to
outsource the task of interpreting arg0. Many platforms are just
interested in the BL32 and BL33 entry point information anyway. Since
some platforms still need to support the old version 1 parameters, the
helper will support both formats when ERROR_DEPRECATED == 0. This allows
those platforms to drop a bunch of boilerplate code and asynchronously
update their BL2 implementation to the newer format.
Change-Id: I9e6475adb1a7d4bccea666118bd1c54962e9fc38
Signed-off-by: Julius Werner <jwerner@chromium.org>
This patch adds a new include/export/ directory meant for inclusion in
third-party code. This is useful for cases where third-party code needs
to interact with TF-A interfaces and data structures (such as a custom
BL2-implementation like coreboot handing off to BL31). Directly
including headers from the TF-A repository avoids having to duplicate
all these definitions (and risk them going stale), but with the current
header structure this is not possible because handoff API definitions
are too deeply intertwined with other TF code/headers and chain-include
other headers that will not be available in the other environment.
The new approach aims to solve this by separating only the parts that
are really needed into these special headers that are self-contained and
will not chain-include other (non-export) headers. TF-A code should
never include them directly but should instead always include the
respective wrapper header, which will include the required prerequisites
(like <stdint.h>) before including the export header. Third-party code
can include the export headers via its own wrappers that make sure the
necessary definitions are available in whatever way that environment can
provide them.
Change-Id: Ifd769320ba51371439a8e5dd5b79c2516c3b43ab
Signed-off-by: Julius Werner <jwerner@chromium.org>
It's not a good idea to use u_register_t for the members of
aapcs64_params_t and aapcs32_params_t, since the width of that type
always depends on the current execution environment. This would cause
problems if e.g. we used this structure to set up the entry point of an
AArch32 program from within an AArch64 program. (It doesn't seem like
any code is doing that today, but it's probably still a good idea to
write this defensively. Also, it helps with my next patch.)
Change-Id: I12c04a85611f2b6702589f3362bea3e6a7c9f776
Signed-off-by: Julius Werner <jwerner@chromium.org>
The watchdog is configured with a default value of 256 seconds in order
to implement the Trusted Board Boot Requirements.
For the FVP and Juno platforms, the FWU process relies on a watchdog
reset. In order to automate the test of FWU, the length of this process
needs to be as short as possible. Instead of waiting for those 4 minutes
to have a reset by the watchdog, tell it to reset immediately.
There are no side effects as the value of the watchdog's load register
resets to 0xFFFFFFFF.
Tested on Juno.
Change-Id: Ib1aea80ceddc18ff1e0813a5b98dd141ba8a3ff2
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
This patch adds some common helper code to support a lightweight
platform parameter passing framework between BLs that has already been
used on Rockchip platforms but is more widely useful to others as well.
It can be used as an implementation for the SoC firmware configuration
file mentioned in the docs, and is primarily intended for platforms
that only require a handful of values to be passed and want to get by
without a libfdt dependency. Parameters are stored in a linked list and
the parameter space is split in generic and vendor-specific parameter
types. Generic types will be handled by this code whereas
vendor-specific types have to be handled by a vendor-specific handler
function that gets passed in.
Change-Id: If3413d44e86b99d417294ce8d33eb2fc77a6183f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Update the skeleton implementation of the console interface.
The 32 bit version was outdated and has been copied from the 64 bit
version.
Change-Id: Ib3e4eb09402ffccb1a30c703a53829a7bf064dfe
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
* changes:
Enable -Wshift-overflow=2 to check for undefined shift behavior
Update base code to not rely on undefined overflow behaviour
Update hisilicon drivers to not rely on undefined overflow behaviour
Update synopsys drivers to not rely on undefined overflow behaviour
Update imx platform to not rely on undefined overflow behaviour
Update mediatek platform to not rely on undefined overflow behaviour
Update layerscape platform to not rely on undefined overflow behaviour
Update intel platform to not rely on undefined overflow behaviour
Update rockchip platform to not rely on undefined overflow behaviour
Update renesas platform to not rely on undefined overflow behaviour
Update meson platform to not rely on undefined overflow behaviour
Update marvell platform to not rely on undefined overflow behaviour
This patch enables MTE for Normal world if the CPU suppors it. Enabling
MTE for secure world will be done later.
Change-Id: I9ef64460beaba15e9a9c20ab02da4fb2208b6f7d
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
This consists of ensuring that the left operand of each shift is
unsigned when the operation might overflow into the sign bit.
Change-Id: Iddd6f38139a4c6e500468b4fc48d04e0939f574e
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>
This patch adds 128-bit integer types int128_t and uint128_t
for "__int128" and "unsigned __int128" supported by GCC and
Clang for AArch64.
Change-Id: I0e646d026a5c12a09fd2c71dc502082052256a94
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
This patch removes incorrect SCTLR_V_BIT definition and adds
definitions for ARMv8.3-Pauth EnIB, EnDA and EnDB bits.
Change-Id: I1384c0a01f56f3d945833464a827036252c75c2e
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Neoverse N1 erratum 1262888 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUECTLR_EL1 system register, which disables the MMU hardware prefetcher.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html
Change-Id: Ib733d748e32a7ea6a2783f3d5a9c5e13eee01105
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Neoverse N1 erratum 1262606 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUACTLR_EL1 system register, which delays instruction fetch after
branch misprediction.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html
Change-Id: Idd980e9d5310232d38f0ce272862e1fb0f02ce9a
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Neoverse N1 erratum 1257314 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUACTLR3_EL1 system register, which prevents parallel
execution of divide and square root instructions.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html
Change-Id: I54f0f40ff9043efee40d51e796b92ed85b394cbb
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Neoverse N1 erratum 1220197 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set two bits in the implementation defined
CPUECTLR_EL1 system register, which disables write streaming to the L2.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html
Change-Id: I9c3373f1b6d67d21ee71b2b80aec5e96826818e8
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Neoverse N1 erratum 1207823 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUACTLR2_EL1 system register.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html
Change-Id: Ia932337821f1ef0d644db3612480462a8d924d21
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Neoverse N1 erratum 1165347 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set two bits in the implementation defined
CPUACTLR2_EL1 system register.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html
Change-Id: I163d0ea00578245c1323d2340314cdc3088c450d
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Neoverse N1 erratum 1130799 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUACTLR2_EL1 system register.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html
Change-Id: I252bc45f9733443ba0503fefe62f50fdea61da6d
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Neoverse N1 erratum 1073348 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUACTLR_EL1 system register, which disables static prediction.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html
Change-Id: I674126c0af6e068eecb379a190bcf7c75dcbca8e
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
* changes:
qemu: use new console interface in aarch32
warp7: remove old console from makefile
Remove MULTI_CONSOLE_API flag and references to it
Console: removed legacy console API
N1SDP platform supports RDIMMs with ECC capability. To use the ECC
capability, the entire DDR memory space has to be zeroed out before
enabling the ECC bits in DMC620. Zeroing out several gigabytes of
memory from SCP is quite time consuming so functions are added that
zeros out the DDR memory from application processor which is
much faster compared to SCP. BL33 binary cannot be copied to DDR memory
before enabling ECC so this is also done by TF-A from IOFPGA-DDR3
memory to main DDR4 memory after ECC is enabled.
Original PLAT_PHY_ADDR_SPACE_SIZE was limited to 36-bits with which
the entire DDR space cannot be accessed as DRAM2 starts in base
0x8080000000. So these macros are redefined for all ARM platforms.
Change-Id: If09524fb65b421b7a368b1b9fc52c49f2ddb7846
Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
* changes:
fdts: stm32mp1: realign device tree files with internal devs
stm32mp1: increase device tree size to 20kB
stm32mp1: make dt_get_stdout_node_offset() static
stm32mp1: use unsigned values for SDMMC defines
stm32mp1: remove useless LIBFDT_SRCS from PLAT_BL_COMMON_SOURCES
stm32mp1: update doc for U-Boot compilation
stm32mp1: add general SYSCFG management
stm32mp1: move stm32_get_gpio_bank_clock() to private file
clk: stm32mp1: correctly handle Clock Spreading Generator
clk: stm32mp1: use defines for mask values in stm32mp1_clk_sel array
clk: stm32mp1: move oscillator functions to generic file
arch: add some defines for generic timer registers
Rework the macro that eases the table definition: the src and msk fields
are now using MASK and SHIFT defines of each source register.
Some macros had then to be modified: _USART1_SEL, _ASS_SEL and _MSS_SEL to
_UART1_SEL, _AXIS_SEL, and _MCUS_SEL to match register fields.
Note: the mask for RCC_ASSCKSELR_AXISSRC is changed from 0x3 to 0x7
to reflect the size of the register field, even if there are only
3 possible clock sources.
The mask value is also corrected for QSPI and FMC clock selection.
Change-Id: I44114e3c1dd37b9fa1be1ba519611abd9a07764c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Those functions are generic for parsing nodes from device tree
hence could be located in generic source file.
The oscillators description structure is also moved to STM32MP1 clock
driver, as it is no more used in stm32mp1_clkfunc and cannot be in a
generic file.
Change-Id: I93ba74f4eea916440fef9b160d306af1b39f17c6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Those defines are used in STM32MP1 clock driver.
It is better to put them altogether with already defined registers.
Change-Id: I6f8ad8c2477b947af6f76283a4ef5c40212d0027
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Convert the R-Car Gen3 platform and both SCIF and Log drivers
to multi-console API.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I18556973937d150b60453f9150d54ee612571e35
The chain of trust description and the pointer pointing to its first
element were incompatible, thus requiring an explicit type cast for
the assignment.
- cot_desc was an array of
const pointers to const image descriptors.
- cot_desc_ptr was a const pointer to
(non-constant) pointers to const image descriptors.
Thus, trying to assign cot_desc to cot_desc_ptr (with no cast) would
generate the following compiler warning:
drivers/auth/tbbr/tbbr_cot.c:826:14: warning: initialization discards
‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
REGISTER_COT(cot_desc);
^~~~~~~~
Change-Id: Iae62dd1bdb43fe379e3843d96461d47cc2f68a06
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Neoverse N1 erratum 1315703 is a Cat A (rare) erratum [1], present in
older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined CPUACTLR2_EL1
system register, which will disable the load-bypass-store feature.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdocpjdoc-466751330-1032/index.html
Change-Id: I5c708dbe0efa4daa0bcb6bd9622c5efe19c03af9
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The workaround is added to the Cortex-A55 cpu specific file. The
workaround is disabled by default and have to be explicitly enabled by
the platform integrator.
Change-Id: I3e6fd10df6444122a8ee7d08058946ff1cc912f8
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
This patch adds the functionality needed for platforms to provide
Branch Target Identification (BTI) extension, introduced to AArch64
in Armv8.5-A by adding BTI instruction used to mark valid targets
for indirect branches. The patch sets new GP bit [50] to the stage 1
Translation Table Block and Page entries to denote guarded EL3 code
pages which will cause processor to trap instructions in protected
pages trying to perform an indirect branch to any instruction other
than BTI.
BTI feature is selected by BRANCH_PROTECTION option which supersedes
the previous ENABLE_PAUTH used for Armv8.3-A Pointer Authentication
and is disabled by default. Enabling BTI requires compiler support
and was tested with GCC versions 9.0.0, 9.0.1 and 10.0.0.
The assembly macros and helpers are modified to accommodate the BTI
instruction.
This is an experimental feature.
Note. The previous ENABLE_PAUTH build option to enable PAuth in EL3
is now made as an internal flag and BRANCH_PROTECTION flag should be
used instead to enable Pointer Authentication.
Note. USE_LIBROM=1 option is currently not supported.
Change-Id: Ifaf4438609b16647dc79468b70cd1f47a623362e
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
* changes:
N1SDP: Initialise CNTFRQ in Non Secure CNTBaseN
N1SDP: Fix DRAM2 start address
Add option for defining platform DRAM2 base
Disable speculative loads only if SSBS is supported
The default DRAM2 base address for Arm platforms
is 0x880000000. However, on some platforms the
firmware may want to move the start address to
a different value.
To support this introduce PLAT_ARM_DRAM2_BASE that
defaults to 0x880000000; but can be overridden by
a platform (e.g. in platform_def.h).
Change-Id: I0d81195e06070bc98f376444b48ada2db1666e28
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
For security DMA should be blocked at the SMMU by default
unless explicitly enabled for a device. SMMU is disabled
after reset with all streams bypassing the SMMU, and
abortion of all incoming transactions implements a default
deny policy on reset.
This patch also moves "bl1_platform_setup()" function from
arm_bl1_setup.c to FVP platforms' fvp_bl1_setup.c and
fvp_ve_bl1_setup.c files.
Change-Id: Ie0ffedc10219b1b884eb8af625bd4b6753749b1a
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The workaround for Cortex-A76 errata #1286807 is implemented
in this patch.
Change-Id: I6c15af962ac99ce223e009f6d299cefb41043bed
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
The workarounds for errata 1257314, 1262606, 1262888 and 1275112 are
added to the Cortex-A76 cpu specific file. The workarounds are disabled
by default and have to be explicitly enabled by the platform integrator.
Change-Id: I70474927374cb67725f829d159ddde9ac4edc343
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
This patch is a preparation for the subsequent changes in
SMMUv3 driver. It introduces a new "smmuv3_poll" function
and replaces inline functions for accessing SMMU registers
with mmio read/write operations. Also the infinite loop
for the poll has been replaced with a counter based timeout.
Change-Id: I7a0547beb1509601f253e126b1a7a6ab3b0307e7
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Similar to bl31_warm_entrypoint, sp_min-based platforms may need
that for special resume handling.
Therefore move it from the private header to the sp_min platform header.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Change-Id: I40d9eb3ff77cff88d47c1ff51d53d9b2512cbd3e
This patch forces all cacheable atomic instructions to be near, which
improves performance in highly contended parallelized use-cases.
Change-Id: I93fac62847f4af8d5eaaf3b52318c30893e947d3
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
The BL1 stage setup code for ARM platforms sets up the SP805 watchdog
controller as the secure watchdog. But not all ARM platforms use SP805
as the secure watchdog controller.
So introduce two new ARM platform code specific wrapper functions to
start and stop the secure watchdog. These functions then replace the
calls to SP805 driver in common BL1 setup code. All the ARM platforms
implement these wrapper functions by either calling into SP805 driver
or the SBSA watchdog driver.
Change-Id: I1a9a11b124cf3fac2a84f22ca40acd440a441257
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Add a driver for configuring the SBSA Generic Watchdog which aids in
the detection of errant system behaviour.
Change-Id: I5a1e7149c69fd8b85be7dfbcf511f431339946f4
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Under certain near idle conditions, DSU may miss response transfers on
the ACE master or Peripheral port, leading to deadlock. This workaround
disables high-level clock gating of the DSU to prevent this.
Change-Id: I820911d61570bacb38dd325b3519bc8d12caa14b
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Under specific conditions, the processor might issue an eviction and an
L2 cache clean operation to the interconnect in the wrong order. Set
the CPUACTLR.ENDCCASCI bit to 1 to avoid this.
Change-Id: Ide7393adeae04581fa70eb9173b742049fc3e050
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
The implementation of the heap function plat_get_mbedtls_heap() becomes
mandatory for platforms supporting TRUSTED_BOARD_BOOT.
The shared Mbed TLS heap default weak function implementation is
converted to a helper function get_mbedtls_heap_helper() which can be
used by the platforms for their own function implementation.
Change-Id: Ic8f2994e25e3d9fcd371a21ac459fdcafe07433e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
This changes the auth_img_desc_t struct to have pointers to struct
arrays instead of struct arrays. This saves memory as many of these
were never used, and can be NULL pointers. Note the memory savings are
only when these arrays are not initialised, as it is assumed these
arrays are fixed length. A possible future optimisation could allow for
variable length.
memory diff:
bl1: bl2:
text text
-12 -12
bss bss
-1463 0
data data
-56 -48
rodata rodata
-5688 -2592
total total
-7419 -2652
Change-Id: I8f9bdedf75048b8867f40c56381e3a6dc6402bcc
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
When Trusted Board Boot is enabled, we need to specify the Chain of
Trust (CoT) of the BL1 and BL2 images. A CoT consists of an array
of image descriptors. The authentication module assumes that each
image descriptor in this array is indexed by its unique image
identifier. For example, the Trusted Boot Firmware Certificate has to
be at index [TRUSTED_BOOT_FW_CERT_ID].
Unique image identifiers may not necessarily be consecutive. Also,
a given BL image might not use all image descriptors. For example, BL1
does not need any of the descriptors related to BL31. As a result, the
CoT array might contain holes, which unnecessarily takes up space in
the BL binary.
Using pointers to auth_img_desc_t structs (rather than structs
themselves) means these unused elements only use 1 pointer worth of
space, rather than one struct worth of space. This patch also changes
the code which accesses this array to reflect the change to pointers.
Image descriptors not needed in BL1 or BL2 respectively are also
ifdef'd out in this patch. For example, verifying the BL31 image is
the responsibility of BL2 so BL1 does not need any of the data
structures describing BL31.
memory diff:
bl1: bl2:
text text
-20 -20
bss bss
-1463 0
data data
-256 -48
rodata rodata
-5240 -1952
total total
-6979 -2020
Change-Id: I163668b174dc2b9bbb183acec817f2126864aaad
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
The Cortex-A12's primary part number is 0xC0D not 0xC0C, so
fix that to make the A12's cpu operations findable.
Change-Id: I4440a039cd57a2fe425fd8a8ec5499ca8e895e31
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
ARMv7 and Cortex-A32(ARMv8/aarch32) uses "arm-linux-gnueabi" toolchain which
has both soft-float and hard-float variants and so there could be scenarios
where soft-float toolchain is used.Even though TF-A documentation recommends
to use hard-float toolchain for aarch32 but there are external projects where
we cannot mandate the selection of toolchain and for those projects at least
the build should not fail.
Current TF-A source fails to build with soft-float toolchain because assembler
does not recognizes "vmsr" instruction which is required to enable floating
point unit.
To avoid this piece of code being compiled with soft-float toolchain add
predefined macro guard " __SOFTFP__" exposed by soft-float toolchain.
Change-Id: I76ba40906a8d622dcd476dd36ab4d277a925996c
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Types tzc_action_t and tzc_region_attributes_t are deprecated.
Change-Id: Ieefeb8521a0e1130f39d09b5c0d2728f05084773
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
The old version of the macro is deprecated.
Commit cc5859ca19 ("Multi-console: Deprecate the
`finish_console_register` macro") provides more details.
Change-Id: I3d1cdf6496db7d8e6cfbb5804f508ff46ae7e67e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
This gives each Secure Partition complete freedom on its address space.
Previously, the memory used by the exception vectors was reserved and
couldn't be used. Also, it always had to be mapped, forcing SPM to
generate translation tables that included the exception vectors as well
as the Partition memory regions. With this change, partitions can reduce
their address space size easily.
Change-Id: I67fb5e9bdf2870b73347f23bff702fab0a8f8711
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
In order to configure and boot SCP, BL31 has to compute and send
the SHA-256 of the firmware data via scpi. Luckily Amlogic GXL SOC
has a DMA facility that could be used to offload SHA-256
computations. This adds basic support of this hardware SHA-256
engine.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Improved support for W=1 compilation flag by solving missing-prototypes
and old-style-definition warnings.
The libraries are compiling with warnings (which turn into errors with
the Werror flag).
Outside of libraries, some warnings cannot be fixed without heavy
structural changes.
Change-Id: I1668cf99123ac4195c2a6a1d48945f7a64c67f16
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
This patch applies the new MSR instruction to directly set the
PSTATE.SSBS bit which controls speculative loads. This new instruction
is available at Neoverse N1 core so it's utilised.
Change-Id: Iee18a8b042c90fdb72d2b98f364dcfbb17510728
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
This erratum can only be worked around on revisions >= r3p0 because the
register that needs to be accessed only exists in those revisions[1].
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0438g/CIHEAAAD.html
Change-Id: I5d773547d7a09b5bd01dabcd19ceeaf53c186faa
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
MHU doorbell driver requires arm platform specific
macro "PLAT_CSS_MHU_BASE".
Rename it to "PLAT_MHUV2_BASE", so that platforms other than arm
can use generic MHU doorbell driver.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
This TODO was added five years ago so I assume that there is not
going to be a shutdown API added after all.
Change-Id: If0f4e2066454df773bd9bf41ed65d3a10248a2d3
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
There are some issues with synopsys MMC driver:
- CMD8 should not expect data (for SD)
- ACMD51 should expect data (Send SCR for SD)
- dw_prepare should not dictate size to be MMC_BLOCK_SIZE, block size is
now handled in the dw_prepare function
- after the CMD completes, when doing dw_read, we need to invalidate cache
and wait for the data transfer to complete
- Need to set FIFO threshold, otherwise DMA might never get the interrupt
to read or write
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
Some bugs in MMC stack needs to be fixed:
- scr cannot be local as this will cause cache issue when invalidating
after the read DMA transfer is completed
- ACMD41 needs to send voltage information in initialization, otherwise the
command is a query, thus will not initialize the controller
- when checking device state, retry until the retries counter goes to zero
before failing
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
SSBS support is determined by checking ID_AA64PFR1_EL1 and not
ID_AA64PFR0_EL1.
FixesARM-Software/tf-issues#679
Change-Id: I8ecba13b850995ec6a6ede3c2a1e02e69a3a95db
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
Check for both IMPLEMENTATION_DEFINED and Architected algorithms of
Address Authentication.
Change-Id: I209dcc6087172cfef7baf8d09e0454628f02cbd0
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Fix some typos and clarify some sentences.
Change-Id: Id276d1ced9a991b4eddc5c47ad9a825e6b29ef74
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
In AArch32, execution of 2 instructions with opposite condition code
might lead to either a data corruption or a CPU deadlock. Set the bit
12 of the Diagnostic Register to prevent this.
Change-Id: I22b4f25fe933e2942fd785e411e7c0aa39d5c1f4
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Complete the MPAM enablement in TF-A for lower ELs by enabling the EL2
traps in MPAMHCR_EL2 and MPAM2_EL2.This prevents an
MPAM-unaware-hypervisor to be restricted by an MPAM-aware-guest.
Change-Id: I47bf3f833fa22baa590f83d49cc0e3f2974e698d
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
The workarounds for these errata are so closely related that it is
better to only have one patch to make it easier to understand.
Change-Id: I0287fa69aefa8b72f884833f6ed0e7775ca834e9
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
This patch provides support for using the scatterfile format as
the linker script with the 'armlink' linker for Tegra platforms.
In order to enable the scatterfile usage the following changes
have been made:
* provide mapping for ld.S symbols in bl_common.h
* include bl_common.h from all the affected files
* update the makefile rules to use the scatterfile and armlink
to compile BL31
* update pubsub.h to add sections to the scatterfile
NOTE: THIS CHANGE HAS BEEN VERIFIED WITH TEGRA PLATFORMS ONLY.
Change-Id: I7bb78b991c97d74a842e5635c74cb0b18e0fce67
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The previous commit added the infrastructure to load and save
ARMv8.3-PAuth registers during Non-secure <-> Secure world switches, but
didn't actually enable pointer authentication in the firmware.
This patch adds the functionality needed for platforms to provide
authentication keys for the firmware, and a new option (ENABLE_PAUTH) to
enable pointer authentication in the firmware itself. This option is
disabled by default, and it requires CTX_INCLUDE_PAUTH_REGS to be
enabled.
Change-Id: I35127ec271e1198d43209044de39fa712ef202a5
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
ARMv8.3-PAuth adds functionality that supports address authentication of
the contents of a register before that register is used as the target of
an indirect branch, or as a load.
This feature is supported only in AArch64 state.
This feature is mandatory in ARMv8.3 implementations.
This feature adds several registers to EL1. A new option called
CTX_INCLUDE_PAUTH_REGS has been added to select if the TF needs to save
them during Non-secure <-> Secure world switches. This option must be
enabled if the hardware has the registers or the values will be leaked
during world switches.
To prevent leaks, this patch also disables pointer authentication in the
Secure world if CTX_INCLUDE_PAUTH_REGS is 0. Any attempt to use it will
be trapped in EL3.
Change-Id: I27beba9907b9a86c6df1d0c5bf6180c972830855
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This commit improves the SDHost driver for RPi3 as following:
* Unblock MMC_CMD(17). Using MMC_CMD(17) is more efficient on
block reading.
* In some low probability that SEND_OP_COND might results CRC7
error. We can consider that the command runs correctly. We don't
need to retry this command so removing the code for retry.
* Using MMC_BUS_WIDTH_1 as MMC default value to improve the stability.
* Increase the clock to 50Mhz in data mode to speed up the io.
* Change the pull resistors configuration to gain more stability.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Concurrent instruction TLB miss and mispredicted return instruction
might fetch wrong instruction stream. Set bit 6 of CPUACTLR_EL1 to
prevent this.
Change-Id: I2da4f30cd2df3f5e885dd3c4825c557492d1ac58
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Streaming store under specific conditions might cause deadlock or data
corruption. Set bit 25:24 of CPUECTLR_EL1, which disables write
streaming to the L2 to prevent this.
Change-Id: Ib5cabb997b35ada78b27e75787afd610ea606dcf
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Implicit Error Synchronization Barrier (IESB) might not be correctly
generated in Cortex-A75 r0p0. To prevent this, IESB are enabled at all
expection levels.
Change-Id: I2a1a568668a31e4f3f38d0fba1d632ad9939e5ad
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Broadcast maintainance operations might not be correctly synchronized
between cores. Set bit 7 of S3_0_C15_C0_2 to prevent this.
Change-Id: I67fb62c0b458d44320ebaedafcb8495ff26c814b
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
STM32MP1 chip embeds a dual Cortex-A7 and a Cortex-M4.
The support for Cortex-M4 clocks is added when configuring the clock tree.
Some minimal security features to allow communications between A7 and M4
are also added.
Change-Id: I60417e244a476f60a2758f4969700b2684056665
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Cortex A5 doesnt support VFP, Large Page addressing and generic timer
which are addressed in this patch. The device tree for Cortex a5
is also included.
Change-Id: I0722345721b145dfcc80bebd36a1afbdc44bb678
Signed-off-by: Usama Arif <usama.arif@arm.com>
Cortex a5 doesnt support hardware division such as sdiv and udiv commands.
This commit adds a software division function in assembly as well as include
appropriate files for software divison.
The software division algorithm is a modified version obtained from:
http://www.keil.com/support/man/docs/armasm/armasm_dom1359731155623.htm
Change-Id: Ib405a330da5f1cea1e68e07e7b520edeef9e2652
Signed-off-by: Usama Arif <usama.arif@arm.com>
Support 32bit descriptor MMU table. This is required by ARMv7
architectures that do not support the Large Page Address Extensions.
nonlpae_tables.c source file is dumped from the OP-TEE project:
core_mmu_armv7.c and related header files.
Change-Id: If912d66c374290c49c5a1211ce4c5c27b2d7dc60
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Usama Arif <usama.arif@arm.com>
In a system with ARMv8.5-PMU implemented:
- If EL3 is using AArch32, setting MDCR_EL3.SCCD to 1 disables counting
in Secure state in PMCCNTR.
- If EL3 is using AArch64, setting SDCR.SCCD to 1 disables counting in
Secure state in PMCCNTR_EL0.
So far this effect has been achieved by setting PMCR_EL0.DP (in AArch64)
or PMCR.DP (in AArch32) to 1 instead, but this isn't considered secure
as any EL can change that value.
Change-Id: I82cbb3e48f2e5a55c44d9c4445683c5881ef1f6f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The variable is renamed to PLAT_ARM_RUN_UART as
the UART is used outside BL31 as well.
Change-Id: I00e3639dfb2001758b7d24548c11236c6335f64a
Signed-off-by: Usama Arif <usama.arif@arm.com>
Armv8.5 introduces the field CSV2 to register ID_AA64PFR0_EL1. It can
have the following 3 values:
- 0: Branch targets trained in one hardware described context may affect
speculative execution in a different hardware described context. In
some CPUs it may be needed to apply mitigations.
- 1: Branch targets trained in one hardware described context can only
affect speculative execution in a different hardware described
context in a hard-to-determine way. No mitigation required.
- 2: Same as 1, but the device is also aware of SCXTNUM_ELx register
contexts. The TF doesn't use the registers, so there is no
difference with 1.
The field CSV2 was originally introduced in the TRM of the Cortex-A76
before the release of the Armv8.5 architecture. That TRM only mentions
the meaning of values 0 and 1. Because of this, the code only checks if
the field has value 1 to know whether to enable or disable the
mitigations.
This patch makes it aware of value 2 as well. Both values 1 and 2
disable the mitigation, and 0 enables it.
Change-Id: I5af33de25a0197c98173f52c6c8c77b51a51429f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Remove useless private structure in function prototypes.
Add a reference counter on clocks.
Prepare for future secured/shared/non-secured clocks.
Change-Id: I3dbed81721da5ceff5e10b2c4155b1e340c036ee
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>
This change makes the platform to panic in case of peripheral reset
resource malfunction.
Change-Id: I17eb9cb045b78a4e5142a8c33b744e84992d732a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>
Create a new file stm32mp_clkfunc.c to put functions that could be common
between several platforms.
Change-Id: Ica915c796b162b2345056b33328acc05035a242c
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Regulator configuration at boot takes more information from DT.
I2C configuration from DT is done in I2C driver.
I2C driver manages more transfer modes.
The min voltage of buck1 should also be increased to 1.2V,
else the platform does not boot.
Heavily modifies stm32_i2c.c since many functions move inside the source
file to remove redundant declarations.
Change-Id: I0bee5d776cf3ff15e687427cd6abc06ab237d025
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>
Remove the previously use function: get_timer, and use new functions
timeout_init_us and timeout_elapsed.
Change-Id: I4e95b123648bff7ca91e40462a2a3ae24cfe1697
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>
Mainly remove suffix 1 from prefix stm32mp1 in several macros and functions
that can be used in drivers shared by different platforms.
Change-Id: I2295c44f5b1edac7e80a93c0e8dfd671b36e88e7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
There are some incorrect casts and some missing casts in the headers.
This patch fixes the ones that were 64-bit or 32-bit wide wrongly and
adds casts where they were missing.
Note that none of the changes of the patch actually changes the values
of the definitions. This patch is just for correctness.
Change-Id: Iad6458021bad521922ce4f91bafff38b116b49eb
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
There are some values that should be 64-bit immediates but that resolve
to 0 because the type of the value is 32-bit wide. This patch casts the
expressions to 64-bit before the shift so that the definition has the
correct value.
The definitions are only used in assembly so far, so the code is not
actually affected by this bug. The assembler treats all values as 64-bit
values, so there are no overflows.
Change-Id: I965e4be631c1d28787c0913661d224c82a6b9155
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Now that setjmp() and longjmp() are compliant with the standard they can
be moved with the other libc files.
Change-Id: Iea3b91c34eb353ace5e171e72f331602d57774d5
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Instead of having a custom implementation of setjmp() and longjmp() it
is better to follow the C standard.
The comments in setjmp.h are no longer needed as there are no deviations
from the expected one, so they have been removed.
All SDEI code that relied on them has been fixed to use the new function
prototypes and structs.
Change-Id: I6cd2e21cb5a5bcf81ba12283f2e4c067bd5172ca
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The Generic Timer is an optional extension to an ARMv7-A implementation.
The generic delay timer can be used from any architecture supported by
the Trusted Firmware. In ARMv7 it is needed to check that this feature
is present. In ARMv8 it is always present.
Change-Id: Ib7e8ec13ffbb2f64445d4ee48ed00f26e34b79b7
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Many parts of the code were duplicating symbols that are defined in
include/common/bl_common.h. It is better to only use the definitions in
this header.
As all the symbols refer to virtual addresses, they have to be
uintptr_t, not unsigned long. This has also been fixed in bl_common.h.
Change-Id: I204081af78326ced03fb05f69846f229d324c711
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
PLAT_ARM_NS_IMAGE_OFFSET is in fact not an offset relative to some base
address, it is an absolute address. Rename it to avoid any confusion.
Change-Id: I1f7f5e8553cb267786afe7e5f3cd4d665b610d3f
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
This commit adds SDHost driver for RaspberryPi3. SDHost driver uses the
GPIO driver to connect the SDCard and SDHost. By using this driver it is
able to read/write raw blocks on SDCard.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
This patch adds support to handle following TLK SMCs:
{TLK_SS_REGISTER_HANDLER, TLK_REGISTER_NS_DRAM_RANGES, TLK_SET_ROOT_OF_TRUST}
These SMCs need to be supported in ATF in order to forward them to
TLK. Otherwise, these functionalities won't work.
Brief:
TLK_SS_REGISTER_HANDLER: This SMC is issued by TLK Linux Driver to
set up secure storage buffers.
TLK_REGISTER_NS_DRAM_RANGES: Cboot performs this SMC during boot to
pass NS memory ranges to TLK.
TLK_SET_ROOT_OF_TRUST: Cboot performs this SMC during boot to pass
Verified Boot parameters to TLK.
Change-Id: I18af35f6dd6f510dfc22c1d1d1d07f643c7b82bc
Reviewed-on: https://git-master.nvidia.com/r/1643851
Signed-off-by: Mihir Joshi <mihirj@nvidia.com>
Commit ed51b51f7a ("Remove build option LOAD_IMAGE_V2") intended
to remove all code related to LOAD_IMAGE_V2=0 but missed a few things.
Change-Id: I16aaf52779dd4af1e134e682731328c5f1e5d622
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
This reverts commit 2f37046524 ("Add support for the SMC Calling
Convention 2.0").
SMCCC v2.0 is no longer required for SPM, and won't be needed in the
future. Removing it makes the SMC handling code less complicated.
The SPM implementation based on SPCI and SPRT was using it, but it has
been adapted to SMCCC v1.0.
Change-Id: I36795b91857b2b9c00437cfbfed04b3c1627f578
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
ARMv8.4-TTST (Small Translation tables) relaxes the lower limit on the
size of translation tables by increasing the maximum permitted value
of the T1SZ and T0SZ fields in TCR_EL1, TCR_EL2, TCR_EL3, VTCR_EL2 and
VSTCR_EL2.
This feature is supported in AArch64 state only.
This patch adds support for this feature to both versions of the
translation tables library. It also removes the static build time
checks for virtual address space size checks to runtime assertions.
Change-Id: I4e8cebc197ec1c2092dc7d307486616786e6c093
Signed-off-by: Sathees Balya <sathees.balya@arm.com>
This commit adds GPIO driver for RaspberryPi3. The GPIO driver for RPi3
also provides the way to do pinmux selections.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Use full include paths like it is done for common includes.
This cleanup was started in commit d40e0e08283a ("Sanitise includes
across codebase"), but it only cleaned common files and drivers. This
patch does the same to Arm platforms.
Change-Id: If982e6450bbe84dceb56d464e282bcf5d6d9ab9b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This patch provides helper function to read the ID_AFR0_EL1
system register for platforms.
Change-Id: Id5491b18e3bf9f619d98d6cc8efd9d2cf5918c9d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
On ARM platforms, the BL2 memory can be overlaid by BL31/BL32. The memory
descriptors describing the list of executable images are created in BL2
R/W memory, which could be possibly corrupted later on by BL31/BL32 due
to overlay. This patch creates a reserved location in SRAM for these
descriptors and are copied over by BL2 before handing over to next BL
image.
Also this patch increases the PLAT_ARM_MAX_BL2_SIZE for juno when TBBR
is enabled.
FixesARM-Software/tf-issues#626
Change-Id: I755735706fa702024b4032f51ed4895b3687377f
Signed-off-by: Sathees Balya <sathees.balya@arm.com>
Valid addresses for GICR base are always a set calculable distance from
the GICD and is based on the number of cores a given instance of GICv3 IP
can support. The formula for the number of address bits is given by the
ARM GIC-500 TRM section 3.2 as 2^(18+log2(cores)) with the MSB set to
one for GICR instances. Holes in the GIC address space are also
guaranteed to safely return 0 on reads. This allows us to support runtime
detection of the GICR base address by starting from GIC base address plus
BIT(18) and walking until the GICR ID register (IIDR) is detected. We
stop searching after BIT(20) to prevent searching out into space if
something goes wrong. This can be extended out if we ever have a device
with 16 or more cores.
Signed-off-by: Andrew F. Davis <afd@ti.com>
The SPM implementation based on MM is going to be kept for the
foreseeable future.
Change-Id: I11e96778a4f52a1aa803e7e048d9a7cb24a53954
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
The BSEC (Boot and Security and OTP control) is intended to control an OTP
(one time programmable) fuse box, used for on-chip non-volatile storage
for device configuration and security parameters.
Change-Id: I38c44684c7b9c6a1f24ec0ae3fe99cec481d5a51
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Mathieu Belou <mathieu.belou@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change fdt_check_status function to fdt_get_status.
Update GPIO defines.
Move some functions in gpio driver, instead of dt helper file.
Add GPIO bank helper functions.
Use only one status field in dt_node_info structure including both status
and secure status.
Change-Id: I34f93408dd4aac16ae722f564bc3f7d6ae978cf4
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>