Currently, sunxi_cpu_off() has two separate code paths: one for the
local CPU, and one for other CPUs. Let's split them in to two functions.
This actually simplifies things, because all callers either operate on
the local CPU only (sunxi_pwr_down_wfi()) or other CPUs only
(sunxi_cpu_power_off_others()). This avoids needing a second MPIDR read
to choose the appropriate code path.
Change-Id: I55de85025235cc95466bfa106831fc4c2368f527
Signed-off-by: Samuel Holland <samuel@sholland.org>
Disabling secondary CPUs during boot is unnecessary because the other
CPUs are already in reset, and it saves an entirely insignificant amount
of power. Let's remove this bit of code that was added mostly "because
we can", and along with it remove an unconditional dependency on the CPU
ops functions.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Ia77a1b722da6ba989c3992b656a6cde3f2238fd7
Checking the exceptional case and letting the success case fall through
is not only more idiomatic, but it also allows adding more exceptional
cases in the future, such as a check for overlapping secure DRAM.
Change-Id: I720441a6a8853fd7f211ebe851f14d921a6db03d
Signed-off-by: Samuel Holland <samuel@sholland.org>
This duplicated the logic in psci_validate_mpidr() which was already
called from psci_cpu_on().
Change-Id: I96ee92f1ce3e9cc2985b4e229ba86ebd27b79915
Signed-off-by: Samuel Holland <samuel@sholland.org>
This optional PSCI function was only implemented when SCPI was
available. However, the underlying SCPI function is not able to fulfill
the necessary contract. First, the SCPI protocol has no way to represent
HW_STANDBY at the CPU power level. Second, the SCPI implementation
maintains its own logical view of power states, and its implementation
of SCPI_CMD_GET_CSS_POWER_STATE does not actually query the hardware.
Thus it cannot provide "the physical view of power state", as required
for this function by the PSCI specification.
Since the function is optional, drop it.
Change-Id: I5f3a0810ac19ddeb3c0c5d35aeb09f09a0b80c1d
Signed-off-by: Samuel Holland <samuel@sholland.org>
The base address of UART peripheral should be given in R0, not in R1.
Otherwise the console_stm32_core_flush issues an assert message.
This issue was highlighted with recent changes in console flush functions.
Change-Id: Iead01986fdbbf30ad2fd9fa515a1d2b611b4e591
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The issue is that, when interrupt is triggered and RAS handler
is entered, after interrupt handler finishes, TF-A will re-enter
bl32 and then crash.
sdei_dispatch_event() may return failing result in some cases,
for example kernel may not have registered a handler or RAS event
may happen early during boot. We restore the NS context when
sdei_dispatch_event() returns failing result.
error log :
Received delegated event
X0 : 0xC4000061
X1 : 0x0
X2 : 0x0
X3 : 0x0
Received event - 0xC4000061 on cpu 0
UnRecognized Event - 0xC4000061
Failed delegated event 0xC4000061, Status Invalid Parameter
Unhandled Exception in EL3.
x30 = 0x000000000401f700
x0 = 0xfffffffffffffffe
x1 = 0xfffffffffffffffe
x2 = 0x00000000600003c0
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Change-Id: I9802e9a32eee0ac3b5a8bcc0362d0b0e3b71dc9f
Turn ON/OFF GIC redistributor in sync with GIC CPU interface ON/OFF.
Issue :
The Linux prompt hangs when all the cores in a cluster are turned OFF
and we try to turn ON a core in that cluster. Previously when TF-A turns
ON a core, TF-A first turns ON the redistributor followed by the core.
This did not match the flow when turning OFF a core, as TF-A did not
turn OFF redistributor when the corresponding core[s] are disabled.
This hang is resolved by disabling redistributor as cores are disabled,
keeping them in sync.
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Change-Id: Ifd04fdcfd47b45e00f874f15b098471883d023f0
Some switch cases uses same operation. So, club switch cases
which uses same operation and remove duplicate code.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I260b474c0ff3f2ca102c32d4af2e4abba2b8f57c
This allows PSCI in TF-A to signal platform power states to QEMU
via a controller in secure space.
This required a sbsa-ref specific version of PSCI functions for the
platform. Also adjusted the MMU range to also include the new EC.
Add a new MMU region for the embedded controller and increase the
size of xlat tables by one for the new region.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: Iece8a88947f11e82ab8988e460a8a66ad175a5ee
sbsa-ref in QEMU creates clusers of 8 cores, it may create up to 512
cores in upto 64 clusters. Implement a qemu_sbsa specific topology file
and increase the BL31_SIZE to accommodate the bigger table sizes. Change
platform_def.h for new topology. Correct PLATFORM_CPU_PER_CLUSTER_SHIFT so
plat_helpers.S calculates correct result.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: Idc5d70394c0956b759ad2c86f9fda8f293f2cfa7
DEVICE2 is not currently used on qemu platform but is needed for
a future patch for qemu_sbsa platform. Change its definition to
RW and add it to all levels of arm-tf similar to DEVICE1 definition.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: I03495471bfd423b61ad44ec4953fb25f76aa54bf
Rather than re-create this file in multiple qemu variants instead
caclulate the shift needed to convert MPIDR to position.
Add a new PLATFORM_CPU_PER_CLUSTER_SHIFT define in platform_def.h
for both qemu and qemu_sbsa to enable this calculation.
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Change-Id: I0e3a86354aa716d95150a3a34b15287cd70c8fd2
When getting a stack protector canary value, check
if cpu supports FEAT_RNG and use that. Fallback to
old method of using a (hardcoded value ^ timer).
Signed-off-by: Tomas Pilar <tomas@nuviainc.com>
Change-Id: I8181acf8e31661d4cc82bc3a4078f8751909e725
Add DT node support for channel 0 where physical memory is split
between 32bit space and 64bit space.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I99a18dbb14cdb54100a836c16445242e430794e3
The HiHope RZ/G2M board from HopeRun consists of main board
(HopeRun HiHope RZ/G2M main board) and sub board(HopeRun
HiHope RZ/G2M sub board). The HiHope RZ/G2M sub board sits
below the HiHope RZ/G2M main board.
This patch adds the required board support to boot HopeRun HiHope
RZ/G2M board.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I3ed55aa4a2cc5c9d9cd6440e087bcd93186520c7
Include header ulcb_cpld.h in plat_pm.c only if RCAR_GEN3_ULCB
is enabled.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: Ie89223097c608265c50e32778e8df28feed82480
Move rcar plat code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I1001bea1a8a9232a03ddbf6931ca3c764ba1e181
Move plat aarch64 code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I66265e5e68bfcf5c3534965fb3549a145c782b47
Move DDR/QoS/PFC header files, so that the same code
can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I2cc0ceda8d05b6b8d95a69afdc233dc0d098e850
Move rpc driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I04805d720d95b8edcc14e652f897fadc7f432197
Move avs driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I85d9fa8b6abf158ce2521f1696478f7c5339fc42
Move authentication driver code to common directory, so that the
same code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I02592dfc714998bf89b9feaa78f685ae36be6f59
Move dma driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: Idce2e2f4e098cfc17219f963373d20ebf74e5b7c
Move watch driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I235f2cde325a0feeadbfc4b7ee02e8b1186f7ea1
Move rom driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I399dfb5eff186db76d26fa9c54bea88bee66789c
Move delay driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I5e806bd0e0a0a4b436048513b7089db90ff9805f
Move console/scif driver code to common directory, so that the
same code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I0b15e4f4ffaaa99e77bcee32b1dad648eeadcd9b
Move pwrc driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I75d91a44d872fe2296b15c700efacd5721385363
Move io driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: Ic661e415c91a1fbfd5eee3bba86466037e51574b
Move eMMC driver code to common directory, so that the same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I7f3055709337327d1a1c9f563c14ad1626adb355
Move plat common sources to common directory, so that same
code can be re-used by both R-Car Gen3 and RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: Id2b1822c97cc50e3febaffc2e5f42b4d53809a17
Create a common directory and move the header and assembly files
so that the common code can be used by both Renesas R-Car Gen3 and
RZ/G2 platforms.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: Ia9a563a1c3c9f8c6f0d3cb82622deb2e155d7f6c
This patch fixes checkpatch warnings and replaces TAB with
space after #define macros.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I11f65d494997cbf612376fb120c27ef0166cdd3a
Sort the header includes alphabetically, fix typos and drop unneeded TAB
and replace it with space
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: Ieff84434877f58ec26c8351611059ad4e11a4e28
Sort the header includes alphabetically and fix checkpatch warnings.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I08fd0d12ee1d8d61391e8afc33f8c67fcf70c4e5
This implements support for UEFI secure variable storage
using standalone MM framework on qemu_sbsa platform.
Non-secure shared memory between UEFI and standalone MM
is allocated at the top of DRAM.
DRAM size of qemu_sbsa varies depends on the QEMU parameter,
so the non-secure shared memory is allocated by trusted firmware
and passed the base address and size to UEFI through device tree
"/reserved-memory" node.
Change-Id: I367191f408eb9850b7ec7761ee346b014c539767
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Add ability to support PS and System reset after idling the APU,
by reading the restart scope from the PMU.
Signed-off-by: Will Wong <willw@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I23c01725d8ebb71ad34be02ab204411b93620702
ATF is not checking PM version. Add version check in such
a way that it is compatible with current and newer version
of PM.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: Ia095d118121e6f75e8d320e87d5e2018068fa079
The current configuration of CPU windows on Armada 37x0 with 4 GB DRAM
can only utilize 3.375 GB of memory. This is because there are only 5
configuration windows, configured as such (in hexadecimal, also showing
ranges not configurable by CPU windows):
0 - 80000000 | 2 GB | DDR | CPU window 0
80000000 - C0000000 | 1 GB | DDR | CPU window 1
C0000000 - D0000000 | 256 MB | DDR | CPU window 2
D0000000 - D2000000 | 32 MB | | Internal regs
empty space | | |
D8000000 - D8010000 | 64 KB | | CCI regs
empty space | | |
E0000000 - E8000000 | 128 MB | DDR | CPU window 3
E8000000 - F0000000 | 128 MB | PCIe | CPU window 4
empty space | | |
FFF00000 - end | 64 KB | | Boot ROM
This can be improved by taking into account that:
- CCI window can be moved (the base address is only hardcoded in TF-A;
U-Boot and Linux will not break with changing of this address)
- PCIe window can be moved (upstream U-Boot can change device-tree
ranges of PCIe if PCIe window is moved)
Change the layout after the Internal regs as such:
D2000000 - F2000000 | 512 MB | DDR | CPU window 3
F2000000 - FA000000 | 128 MB | PCIe | CPU window 4
empty space | | |
FE000000 - FE010000 | 64 KB | | CCI regs
empty space | | |
FFF00000 - end | 64 KB | | Boot ROM
(Note that CCI regs base address is moved from D8000000 to FE000000 in
all cases, not only for the configuration with 4 GB of DRAM. This is
because TF-A is built with this address as a constant, so we cannot
change this address at runtime only on some boards.)
This yields 3.75 GB of usable RAM.
Moreover U-Boot can theoretically reconfigure the PCIe window to DDR if
it discovers that no PCIe card is connected. This can add another 128 MB
of DRAM (resulting only in 128 MB of DRAM not being used).
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I4ca1999f852f90055fac8b2c4f7e80275a13ad7e
Reference Design platform RD-Daniel-ConfigXLR has been renamed to
RD-V1-MC. Correspondingly, remove all uses of 'rddanielxlr' and replace
it with 'rdv1mc' where appropriate.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I5d91c69738397b19ced43949b4080c74678e604c
Reference Design platform RD-Daniel has been renamed to RD-V1.
Correspondingly, remove all uses of 'rddaniel' and replace it with
'rdv1' where appropriate.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I1702bab39c501f8c0a09df131cb2394d54c83bcf
This patch fixes the non compliant code like missing braces for
conditional single statement bodies.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I95b410ae5950f85dc913c4448fcd0a97e0fd490c
Only non-file targets should be set a .PHONY. Otherwise if file target is
set as .PHONY then targets which depends on those file .PHONY targets would
be always rebuilt even when their prerequisites are not changed.
File target which needs to be always rebuilt can be specified in Make
system via having a prerequisite on some .PHONY target, instead of marking
whole target as .PHONY. In Makefile projects it is common to create empty
.PHONY target named FORCE for this purpose.
This patch changes all file targets which are set as .PHONY to depends on
new .PHONY target FORCE, to ensure that these file targets are always
rebuilt (as before). Basically they are those targets which calls external
make subprocess.
After FORCE target is specified in main Makefile, remove it from other
Makefile files to prevent duplicate definitions.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Iee3b4e0de93879b95eb29a1745a041538412e69e
Introduce a new build option CM3_SYSTEM_RESET for A3700 platform, which,
when enabled, adds code to the PSCI reset handler to try to do system
reset by the WTMI firmware running on the Cortex-M3 secure coprocessor.
(This function is exposed via the mailbox interface.)
The reason is that the Turris MOX board has a HW bug which causes reset
to hang unpredictably. This issue can be solved by putting the board in
a specific state before reset.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: I3f60b9f244f334adcd33d6db6a361fbc8b8d209f
Adding the EM specific smc handler for the EM-related requests.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I98122d49604a01a2f6bd1e509a5896ee68069dd0
This patch adds new api to access zynqmp efuse memory
Signed-off-by: VNSL Durga <vnsl.durga.challa@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I0971ab6549552a6f96412431388d19b822db00ab
This patch adds new zynqmp-pm api to provide read/write access to
CSU or PMU global registers.
Signed-off-by: Kalyani Akula <kalyania@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I4fd52eb732fc3e6a8bccd96cad7dc090b2161042
This patch fixes AXG platform build error:
plat/amlogic/axg/axg_pm.c: In function 'axg_pwr_domain_off':
plat/amlogic/axg/axg_pm.c:124:43: error: array subscript 2
is above array bounds of 'const plat_local_state_t[2]'
{aka 'const unsigned char[2]'}
by changing PLAT_MAX_PWR_LVL from MPIDR_AFFLVL1 to MPIDR_AFFLVL2
in plat\amlogic\axg\include\platform_def.h.
Change-Id: I9a701e8f26231e62f844920aec5830664f3fb324
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Add device support for the 'lite' K3 devices. These will use modified
device addresses and allow for fewer cores to save memory.
Note: This family of devices are characterized by a single cluster
of ARMv8 processor upto a max of 4 processors and lack of a level 3
cache.
The first generation of this family is introduced with AM642.
See AM64X Technical Reference Manual (SPRUIM2, Nov 2020)
for further details: https://www.ti.com/lit/pdf/spruim2
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Change-Id: I8cd2c1c9a9434646d0c72fca3162dd5bc9bd692a
There are two communication scheme that have been enabled to communicate
with Secure Proxy in TI.
a) A full fledged prioritized communication scheme, which involves upto
5 threads from the perspective of the host software
b) A much simpler "lite" version which is just a two thread scheme
involving just a transmit and receive thread scheme.
The (a) system is specifically useful when the SoC is massive
involving multiple processor systems and where the potential for
priority inversion is clearly a system usecase killer. However, this
comes with the baggage of significant die area for larger number of
instances of secure proxy, ring accelerator and backing memories
for queued messages. Example SoCs using this scheme would be:
AM654[1], J721E[2], J7200[3] etc.
The (b) scheme(aka the lite scheme) is introduced on smaller SoCs
where memory and area concerns are paramount. The tradeoff of
priority loss is acceptable given the reduced number of processors
communicating with the central system controller. This brings about
a very significant area and memory usage savings while the loss of
communication priority has no demonstrable impact. Example SoC using
this scheme would be: AM642[4]
While we can detect using JTAG ID and conceptually handle things
dynamically, adding such a scheme involves a lot of unused data (cost
of ATF memory footprint), pointer lookups (performance cost) and still
due to follow on patches, does'nt negate the need for a different
build configuration. However, (a) and (b) family of SoCs share the
same scheme and addresses etc, this helps minimize our churn quite a
bit
Instead of introducing a complex data structure lookup scheme, lets
keep things simple by first introducing the pieces necessary for an
alternate communication scheme, then introduce a second platform
representing the "lite" family of K3 processors.
NOTE: This is only possible since ATF uses just two (secure) threads
for actual communication with the central system controller. This is
sufficient for the function that ATF uses.
The (a) scheme and the (b) scheme also varies w.r.t the base addresses
used, even though the memory window assigned for them have remained
consistent. We introduce the delta as part of this change as well.
This is expected to remain consistent as a standard in TI SoCs.
References:
[1] See AM65x Technical Reference Manual (SPRUID7, April 2018)
for further details: https://www.ti.com/lit/pdf/spruid7
[2] See J721E Technical Reference Manual (SPRUIL1, May 2019)
for further details: https://www.ti.com/lit/pdf/spruil1
[3] See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1
[4] See AM64X Technical Reference Manual (SPRUIM2, Nov 2020)
for further details: https://www.ti.com/lit/pdf/spruim2
Signed-off-by: Nishanth Menon <nm@ti.com>
Change-Id: I697711ee0e6601965015ddf950fdfdec8e759bfc
commit 65f7b81728 ("ti: k3: common: Use coherent memory for shared data")
introduced WARMBOOT_ENABLE_DCACHE_EARLY and USE_COHERENT_MEM to handle
multiple clusters across L3 cache systems. This is represented by
"generic" board in k3 platform.
On "lite" platforms, however, system level coherency is lacking since
we don't have a global monitor or an L3 cache controller. Though, at
a cluster level, ARM CPU level coherency is very much possible since
the max number of clusters permitted in lite platform configuration is
"1".
However, we need to be able to disable USE_COHERENT_MEM for the lite
configuration due to the lack of system level coherency.
See docs/getting_started/build-options.rst for further information.
Signed-off-by: Nishanth Menon <nm@ti.com>
Change-Id: I4a0ec150b3f9ea12369254aef834a6cbe82d6be6
The ti_sci_msg_req_reboot message payload has been extended to include
a domain field, and this should be zero to reset the entire SoC with
System Firmwares newer than v2020.04. Add the domain field to the
ti_sci_msg_req_reboot message structure for completeness. Set it up
to zero to fix the reboot issues with newer firmwares.
This takes care of the specific ABI that changed and has an impact on
ATF function.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Change-Id: I4f8064b9d6555687822dc2b2b8ec97609286fa0b
Sec proxy data buffer is 60 bytes with the last of the registers
indicating transmission completion. This however poses a bit
of a challenge.
The backing memory for sec_proxy is regular memory, and all sec proxy
does is to trigger a burst of all 60 bytes of data over to the target
thread backing ring accelerator. It doesn't do a memory scrub when
it moves data out in the burst. When we transmit multiple messages,
remnants of previous message is also transmitted which results in
some random data being set in TISCI fields of messages that have been
expanded forward.
The entire concept of backward compatibility hinges on the fact that
the unused message fields remain 0x0 allowing for 0x0 value to be
specially considered when backward compatibility of message extension
is done.
So, instead of just writing the completion register, we continue
to fill the message buffer up with 0x0 (note: for partial message
involving completion, we already do this).
This allows us to scale and introduce ABI changes back into TF-A only
as needed.
Signed-off-by: Nishanth Menon <nm@ti.com>
Change-Id: Ie22cb2a319f4aa80aef23ffc7e059207e5d4c640
ARM's generic timer[1] picks up it's graycode from GTC. However, the
frequency of the GTC is supposed to be programmed in CNTFID0[2]
register.
In K3, architecture, GTC provides a central time to many parts of the
SoC including graycode to the generic timer in the ARMv8 subsystem.
However, due to the central nature and the need to enable the counter
early in the boot process, the R5 based bootloader enables GTC and
programs it's frequency based on central needs of the system. This
may not be a constant 200MHz based on the system. The bootloader is
supposed to program the FID0 register with the correct frequency it
has sourced for GTC from the central system controller, and TF-A is
supposed to use that as the frequency for it's local timer.
A mismatch in programmed frequency and what we program for generic
timer will, as we can imagine, all kind of weird mayhem.
So, check the CNTFID0 register, if it is 0, warn and use the default
frequency to continue the boot process.
While at it, we can also check CNTCR register to provide some basic
diagnostics to make sure that we don't have OS folks scratch their
heads. Even though this is used during cpu online operations, the cost
of this additional check is minimal enough for us not to use #ifdeffery
with DEBUG flags.
[1] https://developer.arm.com/documentation/100095/0002/generic-timer/generic-timer-register-summary/aarch64-generic-timer-register-summary
[2] https://developer.arm.com/docs/ddi0595/h/external-system-registers/cntfid0
[3] https://developer.arm.com/docs/ddi0595/h/external-system-registers/cntcr
Signed-off-by: Nishanth Menon <nm@ti.com>
Change-Id: Ib03e06788580f3540dcb1a11677d0d6d398b2c9f
The CatB erratum ARM_ERRATA_A72_1319367 applies to all TI A72
platforms as well.
See the following for further information:
https://developer.arm.com/documentation/epm012079/11/
Signed-off-by: Nishanth Menon <nm@ti.com>
Change-Id: I80c6262b9cdadcb12f6dfd5a21272989ba257719
The CatB erratum ARM_ERRATA_A53_1530924 applies to all TI A53
platforms as well.
See the following for further information:
https://developer.arm.com/documentation/epm048406/2100
Signed-off-by: Nishanth Menon <nm@ti.com>
Change-Id: Ic095424ce510139e060b38cfb84509d2cc573cad
* changes:
allwinner: Use RSB for the PMIC connection on H6
allwinner: Return the PMIC to I2C mode after use
allwinner: Always use a 3MHz RSB bus clock
CID 364146: Control flow issues (DEADCODE)
Since the value of PSTATE_PWR_LVL_MASK and the value the of PLAT_MAX_PWR_LVL
are equal on mt8192, the following equation never hold.
if (aff_lvl > PLAT_MAX_PWR_LVL) {
return PSCI_E_INVALID_PARAMS;
}
Remove the deadcode to comply with MISRA standard.
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Change-Id: I71d0aa826eded8c3b5af961e733167ae40699398
CID 364144: Integer handling issues (NO_EFFECT)
The unsigned value is always greater-than-or-equal-to-zero.
Remove such check.
Change-Id: Ia395eb32f55a7098d2581ce7f548b7e1112beaa0
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
RD-N2 platform has been updated to use six GIC ITS blocks. This results
in change in base address of the GIC Redistributor to accomodate two
new GIC ITS blocks. Update the base address of GICR to reflect the same.
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Change-Id: I740a547328fb9a9f25d7a09c08e61bdbc8bf781c
Functions are reimplemented to issue system-level pinctrl EEMI calls
to the PMU-FW rather than using MMIO read/write. Macros and functions
that appear to be unused after the change is made are removed.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I51f2285a79f202cb2ca9f031044002e16dd1e92f
Functions are reimplemented to issue system-level pinctrl EEMI calls
to the PMU-FW rather than using MMIO read/write. Macros and functions
that appear to be unused after the change is made are removed.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I21b8fda855aa69090b85d6aaf411e19560201cb5
The calls are just passed through to the PMU-FW. Before issuing
other pinctrl functions the pin should be successfully requested.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: Ibce280edebedf779b3962009c274d0b3d928e0e4
In pm_query_data() function return type is stored in response so
there is no use of return type. Update return type of function
pm_query_data() from enum pm_ret_status to void. Similarly
update return type of pm_api_clock_get_name() and
pm_api_pinctrl_get_function_name() functions.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: Id811926f0b4ebcc472480bb94f3b88109eb036cd
This patch adds support to enable OP-TEE as S-EL1 SP with SPMC at S-EL2
- create SPMC manifest file with OP-TEE as SP
- add support for ARM_SPMC_MANIFEST_DTS build option
- add optee entry with ffa as method in tc0.dts
Signed-off-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Change-Id: Ia9b5c22c6f605d3886914bbac8ac45e8365671cb
RSB is faster and more efficient, and it has a simpler driver. As long
as the PMIC is returned to I2C mode after use, the rich OS can later use
either bus.
Change-Id: I0c5f32e88a090c8c5cccb81bd24596b301ab9da7
Signed-off-by: Samuel Holland <samuel@sholland.org>
This gives the rich OS the flexibility to choose between I2C and RSB
communication. Since a runtime address can only be assigned once after
entering RSB mode, it also lets the rich OS choose any runtime address.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Id49c124c5e925985fc31c0ba38c7fb6c941aafa8
None of the other drivers (Linux, U-Boot, Crust) need to lower the bus
clock frequency to switch the PMIC to RSB mode. That logic is not needed
here, either. The hardware takes care of running this transaction at the
correct bus frequency.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Idcfe933df4da75d5fd5a4f3e362da40ac26bdad1
BL31 reports the following warning during boot:
WARNING: BL31: cortex_a53: CPU workaround for 1530924 was missing!
Resolve this by enabling the workaround on the affected platforms.
Change-Id: Ia1d5075370be5ae67b7bece96ec0069d9692b14c
Signed-off-by: Samuel Holland <samuel@sholland.org>
While the Allwinner platform code nominally supported a custom
PRELOADED_BL33_BASE, some references to the BL33 load address used
another constant: PLAT_SUNXI_NS_IMAGE_OFFSET. To allow the DTB search
code to work if a U-Boot BL33 is loaded to a custom address,
consistently use PRELOADED_BL33_BASE. And to avoid this confusion in
the future, remove the other constant.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Ie6b97ae1fdec95d784676aef39200bef161471b0
The H6 has a "secure port controller" similar to the A64/H5, but with
more ports and a different register layout. Split the platform-specific
parts out into a header, and add the missing MMIO base address.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I3703868bc595459ecf9568b9d1605cb1be014bf5
H6 has a reorganized R_PRCM compared to A64/H5, with the security switch
at a different offset. Until now, we did not notice, because the switch
has no effect unless the secure mode e-fuse is blown.
Since we are adding more platform-specific CCU registers, move them to
their own header, and out of the memory map (where they do not belong).
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Ie77476db0515080954eaa2e32bf6c3de657cda86
* changes:
doc: Update list of supported FVP platforms
board/rdn2: add board support for rdn2 platform
plat/arm/sgi: adapt to changes in memory map
plat/arm/sgi: add platform id value for rdn2 platform
plat/arm/sgi: platform definitions for upcoming platforms
plat/arm/sgi: refactor header file inclusions
plat/arm/sgi: refactor the inclusion of memory mapping
This patch disable the ITAPDLYENA bit for ITAP delay value zero.
As per IP design, it is recommended to disable the ITAPDLYENA bit
before auto-tuning.
Also disable OTAPDLYENA bit always as there is one issue in RTL
where SD0_OTAPDLYENA has been wrongly connected to both SD0 and SD1
controllers. Hence it is recommended to disable OTAPDLYENA bit always
for both the controllers.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Acked-by: Srinivas Goud <srinivas.goud@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: Icf035cb63510ac7bec4e9d523a622f145eaf0989
This patch check for the DLL status before doing the DLL reset.
If DLL reset is already issued then skip the reset inside ATF
otherwise DLL reset will be issued.
By doing this way, all the following cases will be supported.
1. Patched ATF + Patched Linux base.
2. Older ATF + Patched Linux base.
3. Patched ATF + Older Linux base.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I53a0a27521330f1543275cc9cb44cd1dfc569c65
* changes:
plat: xilinx: versal: Add support of register notifier
plat: xilinx: versal: Add support to get clock rate value
plat: xilinx: versal: Add support of set max latency for the device
plat: versal: Add InitFinalize API call
xilinx: versal: Updated Response of QueryData API call
plat:xilinx:versal: Use defaults when PDI is without sw partitions
plat: xilinx: Mask unnecessary bytes of return error code
xilinx: versal: Skip store/restore of GIC during CPU idle
plat: versal: Update API list in feature check
xilinx: versal: Do not pass ACPU0 always in set_wakeup_source()
* changes:
spm: provide number of vCPUs and VM size for first SP
spm: remove chosen node from SPMC manifests
spm: move OP-TEE SP manifest DTS to FVP platform
spm: update OP-TEE SP manifest with device-regions node
spm: remove device-memory node from SPMC manifests
Add the initial board support for RD-N2 platform.
Change-Id: I8325885bf248dd92191d6fc92a2da91c23118f8c
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Upcoming RD platforms will have an updated memory map for the various
pheripherals on the system. So, for the newer platforms, handle the
memory mapping and other platform specific functionality separately
from the existing platforms.
Change-Id: Iab1355a4c8ea1f6db4f79fcdd6eed907903b6a18
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
In preparation for adding the board support for RD-N2 platform, add
macros to define the platform id and the corresponding SCMI platform
info for the RD-N2 platform.
Change-Id: Ie764ae618732b39e316f7ed080421f5d79adab21
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Upcoming RD platforms have changes in the SOC address map from that
of the existing platforms. As a prepartory step to add support for the
upcoming platforms, create platform definitions for those platforms.
Change-Id: Ic5df9fed02c44e65ec260bbb5efc1b8dbd919a56
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Upcoming RD platforms have deviations in various definitions of
platform macros from that of the exisiting platforms. In preparation
for adding support for those upcoming RD platforms, refactor the
header file inclusion to allow newer platforms to use a different
set of platform macros.
Change-Id: Ic80283ddadafaa7f766f300652cb0d4e507efdb6
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Upcoming RD platforms have a different memory map from those of the
existing platforms. So make the build of the existing mmap entries to be
usable only for existing platforms and let upcoming platforms define
a different set of mmap entries.
Change-Id: Id1ef0293efe8749c78a99237e78d32573c7233aa
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Current implementation doesn't support change of div1 value if clk
has 2 divisor because div1 clk is the parent of the div2 clk and div2
clk does not have SET_RATE_PARENT flag.
This causes div1 value to be fixed and only value of div2 will be
adjusted according to required clock rate.
Example:
Consider a case of nand_ref clock which has 2 divisor and 1 mux.
The frequency of mux clock is 1500MHz and default value of div1 and
div2 is 15 and 1 respectively. So the final clock will be of 100MHz.
When driver requests 80MHz for nand_ref clock, clock framework will
adjust the div2 value to 1 (setting div2 value 2 results final clock
to 50MHz which is more inaccurate compare to 100Mhz) which results
final clock to 100MHz.
Ideally the value of div1 and div2 should be updated to 19 and 1
respectively so that final clock goes to around 78MHz.
This patch fixes above problem by allowing change in div1 value.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: Ibb98f6748d28653fdd1e59bf433b6a37ce9c1a58
This patches copies only the valid part of string and
avoids filling junk at the end.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: If23772f31f9cf7f5042e8bfc474fbfe77dcd90e7
The primary VM concept is removed from the SPMC.
Update the SPMC manifests with number of Execution Contexts
and SP workspace size for the first Secure Partition (as it
is done for NWd secondary VMs and other SPs).
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I3b9c52666f7dfe74ab1f7d2148ad0070ee44b54e
The chosen node is no longer required as the SPMC implements
a specific boot flow which no longer requires this node.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Ib566b602a7f83003a1b2d0ba5f6ebf4d8b7a9156
The PVM concept is removed from the SPMC so the device-memory
node which is specifying the device memory range for the PVM
is no longer applicable.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: If0cb956e0197028b24ecb78952c66ec454904516
When system resume, we want to print log as soon as possible.
So we add uart save and restore api, and they will be called
when systtem suspend and resume.
Change-Id: I83b477fd2b39567c9c6b70534ef186993f7053ae
Signed-off-by: Yuchen Huang <yuchen.huang@mediatek.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
1.Modify this driver to make it more complete and more standard.
2.And makes this driver available for more IC services.
3.Solve some bugs in the software.
Signed-off-by: G.Pangao <gtk_pangao@mediatek.com>
Change-Id: I284956d47ebbbd550ec93767679181185e442348
Implement PSCI platform OPs to support CPU hotplug and MCDI.
Change-Id: I31abfc752b69ac40e70bc9e7a55163eb39776c44
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Add MCDI related drivers to handle CPU powered on/off in CPU suspend.
Change-Id: I5110461e8eef86f8383b45f197ec5cb10dbfeb3e
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Add support of register notifier.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I41ef4c63abcc9aee552790b843adb25a5fd0c23e
Add support to get clock's rate value.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I3ed881053ef323b2ca73e13edd0affda860d381d
Add support of set max latency, to change in the maximum powerup latency
requirements for a specific device currently used by Subsystem.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I8749886abb1a7884a42c4d156d89c9cd562a5b1a
Add support to call InitFinalize API in Versal which calls
corresponding LibPM API.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I3428b7245b4db1ef6db8a90b7ad20b6e484ed3b2
For the current XilPM calls, The handler of IPI returns information
with 16 Bytes data.
So during QueryData API call for the ClockName and PinFunctionName,
response data(name of clock or function) response[0..3] are used to
return name. And status is not being returned for such API.
Updated XilPM calls reply in a consistent way and The handler of IPI
return information with 32Bytes data. Where response[0] always set
to status.
For the version-2 of QueryData API, during call for the ClockName
and PinFunctionName, response data(name of clock or function) get as
response[1...4].
To support both the version of QueryData API, added version based
compatibility by the use of feature check.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I336128bff7bbe659903b0f8ce20ae6da7e3b51b4
In JTAG mode check the ATF handoff structure, if the magic string
is not present then use bl32 and bl33 default values.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I1f2c4a2060d8a2e70d3b5fb2473124b685f257fc
Versal firmware adds extra error codes along with PM error codes
while sending response to driver. This makes incorrect error
identification at driver side.
To fix this, mask the unnecessary error bytes before sending the
error code to the driver.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I18c2f3bd2d067e91344852c2f0c1bafea0e6eb23
GIC registers needs to be stored/restored during system
suspend/resume only and not during CPU idle.
During CPU idle, minimum 1 CPU is in ON state.
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I5de2ce3a61bf4260f9385349202b0f592a47aaba
Add below API in feature check list which is actually present in
firmware:
- PM_GET_CHIPID
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I98b82da74164f065c8835861f74b0f2855e9bcbf
Existing code passes ACPU0 to LibPM as node_id in set_wakeup_source()
call because last suspending core will be ACPU0 in most of the case.
Now it may be possible that user may disable the ACPU0 using hot-plug
and after that it suspends Linux. So in that case ACPU0 will not be
last suspending core.
To overcome above scenario, pass the current running processor ID
while calling set_wakeup_source().
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: If15354c2150b5bb1305b5f93ca4e8c7a81d59f0a
These two targets are build by make subprocesses and are independent.
So splitting them into own targets allow make to build them in parallel.
$(TIMBUILD) script depends on $(TIMDDRTOOL) so specify it in Makefile.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I139fc7fe64d8de275b01a853e15bfb88c4ff840d
Add check when building mrvl_bootimage that size of bl1 image is not bigger
than maximal size.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ib873debd3cfdba9acd4c168ee37edab3032e9f25
FORCE target is used as a dependency for other file targets which needs to
be always rebuilt. .PHONY target is standard Makefile target which specify
non-file targets and therefore needs to be always rebuilt.
Targets clean, realclean and distclean are .PHONY targets used to remove
built files. Correctly set that mrvl_clean target is prerequisite for these
clean targets to ensure that built files are removed.
Finally this change with usage of FORCE target allows to remove mrvl_clean
hack from the prerequisites of a8k ${DOIMAGETOOL} target which was used
just to ensure that ${DOIMAGETOOL} is always rebuilt via make subprocess.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I2fa8971244b43f101d846fc433ef7b0b6f139c92
Create copy of WTMI images instead of moving them into TF-A build directory.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I2dc24c33b9ce540e4acde51fc1a5c946ae66a5d7
Rather create a temporary copy in $(BUILD_PLAT) and modify only copy.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I256c029106ea6f69faa086fc4e5bee9f68cd257f
$(WTMI_IMG) is used only by $(MAKE) subprocess in $(DOIMAGEPATH) directory.
So calling truncate on $(WTMI_IMG) after $(MAKE) in $(DOIMAGEPATH) has no
effect and can just damage input file for future usage. Therefore remove
this truncate call.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I9925c54c5d3d10eadc19825c5565ad4598a739a7
Save some space by enabling the log messages like bl33 address
only for debug builds. Also check the bl33 and bl32 address and
print only if this is not NULL.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I58d846bf69a75e839eb49abcbb9920af13296886
For boot health status PMU Global General Storage Register 4 is
used. GGS4 can be used for other purpose along with boot health
status. So, change its name from PM_BOOT_HEALTH_STATUS_REG
to PMU_GLOBAL_GEN_STORAGE4.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Change-Id: I2f5c4c6a161121e7cdb4b9f0f8711d0dad16c372
Update the xilinx platform makefile to include GICv2 makefile
instead of adding the individual files. Updating this change
as per the latest changes done in the commit #1322dc94f7.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I79d8374c47a7f42761d121522b32ac7a5021ede8
Increase SHARED_RAM_SIZE in sbsa_qemu platform from 4KB to 8KB.
sbsa_qemu uses SHARED_RAM for mail box and hold state of each cpus. If
qemu is configured with 512 cpus, region size used by qemu is greater
than 4KB.
Signed-off-by: Masato Fukumori <masato.fukumori@linaro.org>
Change-Id: I639e44e89335249d385cdc339350f509e9bd5e36
It uses the system timer as "entropy" source in the same
way as QEMU, layerscape and others.
Change-Id: Icda17b78e85255bea96109ca2ee0e091187d62ac
Signed-off-by: Christoph Müllner <christophm30@gmail.com>
Enable basic support for Neoverse-N2 CPUs.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I498adc2d9fc61ac6e1af8ece131039410872e8ad
Include libraries needed to emulate Cortex-A72 on
sbsa-ref target of QEMU.
Signed-off-by: Tanmay Jagdale <tanmay.jagdale@linaro.org>
Change-Id: I98cf17b1662c70898977a841af07e07b5cfca8ba
Renamed SMC API from "plat_smccc_feature_available" to
"plat_is_smccc_feature_available" as per the current implementation.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ib0fa400816fba61039c2029a9e127501a6a36811
renamed smcc api with correct name plat_is_smccc_feature_available
Change-Id: I277ece02bffc2caa065256576c1a047dfcde1c92
Signed-off-by: Saurabh Gorecha <sgorecha@codeaurora.org>
Marvell's TF-A fork has SUBVERSION set to devel-18.12.2.
The only differences between Marvell's devel-18.12.0 and devel-18.12.2
versions are documentation updates and cherry-picked patches from TF-A
upstream repository.
So upstream TF-A has already all changes from Marvell's TF-A devel-18.12.2
fork and therefore update SUBVERSION to reflect this state.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I5ce946a5176a5cbf124acd8037392463d586b072
This new target builds boot-image.bin binary as described in documentation.
This image does not contain WTMI image and therefore WTP repository is not
required for building.
Having ability to build just this boot-image.bin binary without full
flash-image.bin is useful for A3720 Turris MOX board which does not use
Marvell's WTP and a3700_utils.
To reduce duplicity between a8k and a3k code, define this new target and
also definitions for $(BUILD_PLAT)/$(BOOT_IMAGE) in common include file
marvell_common.mk.
For this purpose it is needed to include plat/marvell/marvell.mk file from
a3700_common.mk unconditionally (and not only when WTP is defined). Now
when common file plat/marvell/marvell.mk does not contain definition for
building $(DOIMAGETOOL), it is possible to move its inclusion at the top of
the a3700_common.mk file.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ic58303b37a1601be9a06ff83b7a279cb7cfc8280
Current binary wtptp/linux/tbb_linux which is specified in $(DOIMAGETOOL)
variable points to external pre-compiled Marvell x86_64 ELF linux binary
from A3700-utils-marvell WTP repository.
It means that currently it is not possible to compile TF-A for A3720 on
other host platform then linux x86_64.
Part of the A3700-utils-marvell WTP repository is also source code of
$(DOIMAGETOOL) TBB_Linux tool.
This change adds support for building $(DOIMAGETOOL) also for a3k platform.
After running $(MAKE) at appropriate subdirectory of A3700-utils-marvell
WTP repository, compiled TBB_linux tool will appear in WTP subdirectory
wtptp/src/TBB_Linux/release/. So update also $(DOIMAGETOOL) variable to
point to the correct location where TBB_linux was built.
To build TBB_linux it is required to compile external Crypto++ library
which is available at: https://github.com/weidai11/cryptopp.git
User needs to set CRYPTOPP_PATH option to specify path to that library.
After this change it is now possible to build whole firmware for A3720
platform without requirement to use pre-compiled/proprietary x86_64
executable binaries from Marvell.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I6f26bd4356778a2f8f730a223067a2e550e6c8e0
Fix a number of typos and misspellings in TF-A
documentation and comments.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Change-Id: I34c5a28c3af15f28d1ccada4d9866aee6af136ee
From GCC-9 implementation of switch case was generated through jump tables,
because of which we are seeing 1MB increase in rodata section. To reduce
the size we are recommending to use fno-jump-tables.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I069733610809b8299fbf641f0ae35b359a8afd69
All EEMI error codes start with value 2000.
Note: Legacy error codes ARGS (=1) and NOTSUPPORTED (=4) returned by
current ATF code have been left in place.
Signed-off-by: Davorin Mista <davorin.mista@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I939afa85957cac88025d82a80f9f6dd49be993b6
Linux clock framework cannot properly deal with these errors. When the
error is related to the lack of permissions to control the clock we
filter the error and report the success to linux. Before recent changes
in clock framework across the stack, this was done in the PMU-FW as a
workaround. Since the PMU-FW now handles clocks and the permissions to
control them using general principles rather than workarounds, it can
no longer distinguish such exceptions and it has to return no-access
error.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change-Id: I1491a80e472f44e322a542b29a20eb1cb3319802
Currently, when RECLAIM_INIT_CODE is set, the
stacks are scaled to ensure that the entirety
of the init section can be reclaimed as stack.
This causes an issue in lib/psci/aarch64/psci_helpers.S,
where the stack size is used for cache operations in
psci_do_pwrdown_cache_maintenance(). If the stacks
are scaled, then the PSCI code may fail to invalidate
some of the stack memory before power down.
Resizing stacks is also not good for stability in general,
since code that works with a small number of cores may
overflow the stack when the number of cores is increased.
Change to make every stack be PLATFORM_STACK_SIZE big,
and allow the total stack to be smaller than the
init section.
Any pages of the init section not reclaimed as
stack will be set to read-only and execute-never,
for security.
Change-Id: I10b3884981006431f2fcbec3864c81d4a8c246e8
Signed-off-by: David Horstmann <david.horstmann@arm.com>
This patch is used to fix remaining non compliant code for Intel
SoCFPGA's mailbox and sip driver. These changes include:
- Change non-interface required uint32_t into unsigned int
- Change non-negative variable to unsigned int
- Remove obsolete variable initialization to 0
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I3a16c7621a5fc75eb614d97d72e44c86e7d53bf5
This patch is used to fix remaining non compliant code for Intel
SocFPGA's mailbox driver. These changes include:
- adding integer literal for unsigned constant
- fix non-boolean controlling expression
- add braces even on conditional single statement bodies
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I0f8fd96a3540f35ee102fd2f2369b76fa73e39e1
Attempt to restart the mailbox if the mailbox driver not able
to write any data into the mailbox command buffer.
Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Change-Id: Ia45291c985844dec9da82839cac701347534d32b
Allow mailbox command that is larger than mailbox command FIFO buffer
size to be sent to SDM in multiple chunks.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I683d5f1d04c4fdf57d11ecae6232b7ed3fc49e26
Change the main loop inside mailbox poll function from while(1) to a
retry counter named sdm_loop. This is to limit the maximum possible
looping of the function and prevent unexpected behaviour.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I63afad958fe5f656f6333b60d5a8b4c0ada3b23d
For each count down of time out counter, wait for number of
miliseconds to ensure the time out duration is predictive.
Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Change-Id: I0e92dd1ef1da0ef504ec86472cf0d3c88528930b
Mailbox driver should read the response data if the response length
in the response header is non-zero even the response header indicates
error (non-zero).
Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Change-Id: I928f705f43c0f46ac74b84428b830276cc4c9640
This patch factorizes mailbox read response from SDM into a function.
Also fix the logic to support reading larger than 16 words response from
SDM.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ie035ecffbbc42e12dd68061c403904c28c3b70e5
This patch modifies several basic mailbox driver features to prepare for
FCS enablement:
- Job id management for asynchronous response
- SDM command buffer full
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I78168dfb6c521d70d9cba187356b7a3c8e9b62d2
Sort and rearrange definitions in both mailbox and sip header to
increase readability and maintainability.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I5544c2f17efdf3174757c55afd8cc1062fbae856
Rename variables to improve readability of mailbox read response and
mailbox poll response flow.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Icd33ff1d2abb28eeead15e4eb9c7f9629f8cb402
Ensure 'PLAT_SEC_ENTRY' is cleared during early platform
setup. This is to prevent the slave CPU cores jump to the stale
entry point after warm reset when using U-Boot SPL as first
stage boot loader.
Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Change-Id: I3294ce2f74aa691d0cf311fa30f27f9d4fb8800a
Increase INTEL_SIP_SMC_FPGA_CONFIG_SIZE from 16 to 32MB. We need higher
pre-reserved memory size between Intel service layer and secure monitor
software so we can handle JIC file authorization.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Change-Id: Ibab4e42e4b7b93a4cf741e60ec9439359ba0a64c
Remove urgent argument from asynchrounous mailbox command as any urgent
command should always be synchronous
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Iaa64335db24df3a562470d0d1c3d6a3a71493319
Use pre-defined macros for return values and common mailbox arguments
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I5d549ee5358aebadf909f79fda55e83ee9844a0e
* changes:
plat: marvell: armada: Building ${DOIMAGETOOL} is only for a8k
plat: marvell: armada: Fix including plat/marvell/marvell.mk file
plat: marvell: armada: a3k: When WTP is empty do not define variables and targets which depends on it
For the first partition, mark first 2GB as device memory excluding
the Trusted DRAM region reserved for the SPMC.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I3ff110b3facf5b6d41ac2519ff6ca5e30a0a502b
The qemu_sbsa platform uses 42bit address size but
the cortex-a53 only supports 40bit addressing, the
cpu is incompatible with the platform.
The aem_generic is also not used with qemu_sbsa, in
fact, the platform currently only properly supports
the cortex-a57 cpu.
Change-Id: I91c92533116f1c3451d01ca99824e91d3d58df14
Signed-off-by: Tomas Pilar <tomas@nuviateam.com>
Samuel Holland
Yann Gautier
Manish Pandey
Madhukar Pappireddy
Ming Huang
Jagadeesh Ujja
Rajan Vaja
Peng Fan
Graeme Gregory
Tomas Pilar
Biju Das
Masahisa Kojima
Will Wong
Lauren Wehrmeister
Marek Behún
Aditya Angadi
Venkatesh Yadav Abbarapu
Pali Rohár
Joanna Farley
VNSL Durga
Kalyani Akula
Alexei Fedorov
Andrew F. Davis
Nishanth Menon
Suman Anna
André Przywara
Yuchen Huang
Yidi Lin
Xi Chen
Vijayenthiran Subramaniam
Mirela Simonovic
Arunachalam Ganapathy
Sai Krishna Potthuri
Olivier Deprez
Ravi Patel
Siva Durga Prasad Paladugu
Nina Wu
elly.chiang
G.Pangao
Hsin-Hsiung Wang
Dehui Sun
James Liao
Tejas Patel
Masato Fukumori
Christoph Müllner
Javier Almansa Sobrino
Tanmay Jagdale
Manish V Badarkhe
Saurabh Gorecha
David Horstmann
Davorin Mista
Abdul Halim, Muhammad Hadi Asyrafi
Chee Hong Ang
Po Xu
Richard Gong
Varun Wadekar
Tomas Pilar