This patch empowers the platforms to provide an array with the
registers that must be saved/restored across System Suspend.
Original-change-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables the 'xlat_table_v2' library for the Tegra Memory
Controller driver. This library allows us to dynamically map/unmap
memory regions, with MMU enabled.
The Memory Controller driver maps/unmaps non-overlapping Video Memory
region, to clean it of any secure contents, before it resizes the
region.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch makes the default implementation of plat_core_pos_by_mpidr()
as weakly linked, so that platforms can override it with their own.
Tegra186, for one, does not have CPU IDs 2 and 3, so it has its own
implementation of plat_core_pos_by_mpidr().
Change-Id: I7a5319869c01ede3775386cb95af1431792f74b3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch empowers the platforms to provide the settings (e.g. stream ID,
security setting, transaction overrides) required by the Memory Controller
driver. This allows the platforms to program the Memory Controller as per
their needs and makes the driver scalable.
Original-change-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This ARI call enables the EDBGREQ feature in the CCPLEX,
which will cause the CPUs to enter debug state instead of
vectoring to sw (ie MCA handler) upon receiving an async
abort signal.
Change-Id: Ifcb0e11446b6ac55179e3350d8f02b60ba32c94d
Signed-off-by: Rich Wiley <rwiley@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch updates the ARI header file to v3.1.
Change-Id: I3e58cf50d27fb6e72062bb9d9782b75296b32025
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the variable width to store the TZDRAM base
address used to resume from System Suspend.
Change-Id: Ib67eda64b09f26fb2f427f0d624f057081473132
Signed-off-by: Steven Kao <skao@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds a config to the memory controller driver to enable SMMU
device init during boot. Tegra186 platforms keeps it enabled by default,
but future platforms might not support it.
Change-Id: Iebe1c60a25fc1cfb4c97a507e121d6685a49cb83
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds a new SMC function ID to read the refclk and coreclk
clock counter values from the Activity Monitor. The non-secure world
requires this information to calculate the CPU's frequency.
Formula: "freq = (delta_coreclk / delta_refclk) * refclk_freq"
The following CPU registers have to be set by the non-secure driver
before issuing the SMC:
X1 = MPIDR of the target core
X2 = MIDR of the target core
Change-Id: I296d835def1f5788c17640c0c456b8f8f0e90824
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds a new config to enable MC settings for the AFIW
and AFIR devices. Platforms must enable this config on their own.
Change-Id: I53b450117e4764ea76d9347ee2928f9be178b107
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch moves the smmu driver introduced by the Tegra186 port
to tegra/common so that future chips can (re)use it.
Change-Id: Ia44c7f2a62fb2d8869db3a44742a8c6b13c49036
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch splits the MCE driver into public and private interfaces
to allow usage of common functionality across multiple SoCs.
Change-Id: Ib58080e730d72f11ff79507d8e0acffb2ad5c606
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The printf() isn't used by the firmware itself, just by the tools under
the ./tools/ folder. Then tf_printf will unconditionally print.
Remove the unused print_dram_status_info() function.
Change-Id: Ie699ccb54a5be9a2cbbd7b8d4193b57075a2f57a
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Zynqmp implements a version of the Cortex A53 affected by errata 855873.
Enable the workaround for the errata and silence the warning: "WARNING:
BL31: cortex_a53: errata workaround for 855873 was missing!".
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
This patch moves the TSA block's macros from memctrl_v2.h to
tegra_def.h in the Tegra186 tree.
Change-Id: I8b45dd3905c5d1f33ffb36d8b2de72aeb06674aa
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch moves the chip specific memory controller driver defines to
the appropriate tegra_def.h files, for future compatibility.
Change-Id: I3179fb771d8b32e913ca29bd94af95f4b2fc1961
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch moves the MCE's configurable parameters to tegra_def.h for
the Tegra186 SoC, to allow forward compatiblity.
Change-Id: If8660c1c09908a4064dbb67d5ca4fb78389cab13
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Remove stream ID overrides for AON. AON drives its own stream ID when
accesing IOVA memory. However, it needs to use a physical stream ID when
accesing GSC memory. Overriding stream ids prevents AON from accessing
GSC memory, so remove them to allow AON to access GSCs.
Change-Id: Ia2b11014d9780c4546b5e781621ae4cd413735cc
Signed-off-by: Mustafa Yigit Bilgen <mbilgen@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch reverts the APE overrides added for chip verification.
Change-Id: Ib85560934d63f6e41e95ef6898a341f24761a517
Signed-off-by: Vivek Aseeja <vaseeja@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch updates wake time of the cpu to use the MSBs and zero
out the LSB's. Only 24 out of 32 bits are currently passed
through the PSCI interface. Previously all the LSB's were used.
Change-Id: Ie2d9d1bf6e3003dd47526a124f64e6ad555d2371
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The TEGRA_ARI_COPY_MISCREG_AA64_RST ARI should be called with
request_lo/hi set to zero. MTS automatically takes the reset
vector from MISCREG_AA64_RST register and does not need it to
be passed as parameters. This patch updates the API and the
caller function accordingly.
Change-Id: Ie3e3402d93951102239d988ca9f0cdf94f290d2f
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
When entering C7, ATF disables caches and flushes the L1 cache. However,
wake_time[cpu] can still remain in the L2 cache, causing later reads to it
to fetch from DRAM. This will read stale values.
Fix this by aligning wake_time[cpu] to cache lines, and explicitly cleaning it
before disabling caches.
Change-Id: Id73d095b479677595a6b3dd0abb240a1fef5f311
Signed-off-by: Mustafa Yigit Bilgen <mbilgen@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch updates the ARI header to version 3.0
Change-Id: I7cfe0c61c80a6b78625232135dd63393602d32fe
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The TZRAM memory loses its state during "System Suspend". This patch
check if TZRAM base address contains valid data, to decide if the system
is exiting from "System Suspend". To enable TZDRAM encryption, the Memory
Controller's TZDRAM base/size registers would be populated by the BPMP
when the system "wakes up".
Change-Id: I5fc8ba1ae3bce12f0ece493f6f9f5f4d92a46344
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This change adds function to invoke for MISC_CCPLEX ARI calls and
the corresponding smc handler. This can be used to enable/disable
Coresight clock gating.
Change-Id: I4bc17aa478a46c29bfe17fd74f839a383ee2b644
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the incorrect return value that was being passed
back for the ENUM_FEATURES ARI call.
Change-Id: I3842c6ce27ea24698608830cf4c12cfa7ff64421
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch clears the unused or reserved ARI input registers
before issuing the actual ARI command.
Change-Id: I454b86566bfe088049a5c63527c1323d7b25248a
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
If SCP_BL2 is passed in from the command line, it is recognized by
make_helpers/tbbr/tbbr_tools.mk, and the cert_create tool generates
the corresponding key and content certificates.
On the other hand, the top-level Makefile does not care SCP_BL2, so
the --scp-fw option is not passed to the fiptool. As far as I see
plat/arm/css/common/css_common.mk, it looks like a platform's job to
add $(eval $(call FIP_ADD_IMG,SCP_BL2,--scp-fw)).
We can make the top-level Makefile kind enough to take care of it.
This is useful when we want to have optional SCP_BL2 firmware.
Adjust css_common.mk so that Juno still requires SCP_BL2 by default.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The rockchip_pd_pwr_down_wfi function is currently unused, which may
trigger compiler warnings or errors. Remove it.
Change-Id: I7e1b0ae092e8855528ac2065ecefc8bd45305f31
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Some header files using the ULL() macro were not directly including
utils.h where the macro definition resides. As a consequence, a linker
script with values using this macro did not see the macro definition
and kept the "ULL(<value>)" call in the preprocessed file, which lead to
link error.
Files using ULL() macro now include utils.h directly.
Change-Id: I433a7f36bd21a156c20e69bc2a2bb406140ebdf9
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
This function fills the buffer (first argument) with the specified
number of bytes (second argument) from the trusted entropy source.
This function will be used to initialize the stack protector canary.
Change-Id: Iff15aaf4778c13fa883ecb5528fcf9b8479d4489
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
Introduce new build option ENABLE_STACK_PROTECTOR. It enables
compilation of all BL images with one of the GCC -fstack-protector-*
options.
A new platform function plat_get_stack_protector_canary() is introduced.
It returns a value that is used to initialize the canary for stack
corruption detection. Returning a random value will prevent an attacker
from predicting the value and greatly increase the effectiveness of the
protection.
A message is printed at the ERROR level when a stack corruption is
detected.
To be effective, the global data must be stored at an address
lower than the base of the stacks. Failure to do so would allow an
attacker to overwrite the canary as part of an attack which would void
the protection.
FVP implementation of plat_get_stack_protector_canary is weak as
there is no real source of entropy on the FVP. It therefore relies on a
timer's value, which could be predictable.
Change-Id: Icaaee96392733b721fa7c86a81d03660d3c1bc06
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
This API makes sure that all the characters sent to the crash console
are output before returning from it.
Porting guide updated.
Change-Id: I1785f970a40f6aacfbe592b6a911b1f249bb2735
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
It is needed to add placeholders for this function because, as this is
not a `plat_xxx()` function, there aren't weak definitions of it in any
file.
If `console_flush()` is used and there isn't an implementation of
`console_core_flush()` in any file, the compilation will fail.
Change-Id: I50eb56d085c4c9fbc85d40c343e86af6412f3020
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This patch switches to the functions which identify the underlying
platform in order to calculate the chip SKU.
Change-Id: I20cf5623465289ccfab28d6578efcf762bfeb456
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch runs the MCE firmware's version check only if the underlying
platform has the capability to the run the firmware. MCE firmware is not
running on simulation platforms, identified by v0.3 or v0.6, read from the
Tegra Chip ID value.
Change-Id: I3b1788b1ee2a0d4464017bb879ac5792cb7022b8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch uses helper functions to read the chips's major and minor
version values.
Change-Id: I5b2530a31af5ab3778a8aa63380def4e9f9ee6ec
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds all the UART controllers to the memory map.
Change-Id: I035e55ca7bff0a96115102f2295981f9e3a5da6b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Commit f3d3b316f8 replaced
plat_get_syscnt_freq by plat_get_syscnt_freq2 on all the
upstream platforms. This patch modifies the Tegra186 code
which is not present usptream, yet.
Change-Id: Ieda6168050a7769680a3a94513637fed03463a2d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch disables TCU prefetch for all the contexts in order
to improve SMMU performance.
Change-Id: I82ca49a0e396d9f064f5c62a5f00c4b2101d8459
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch overrides the default handlers to get BL31 arguments from the
previous bootloader. The previous bootloader stores the pointer to the
arguments in PMC secure scratch register #53.
BL31 is the first component running on the CPU, as there isn't a previous
bootloader. We set the RESET_TO_BL31 flag to enable the path which assumes
that there are no input parameters passed by the previous bootloader.
Change-Id: Idacc1df292a70c9c1cb4d5c3a774bd796175d5e8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch removes duplicate code from the platform's SiP handler
routine for processing Video Memory Carveout region requests and
uses the common SiP handler instead.
Change-Id: Ib307de017fd88d5ed3c816288327cae750a67806
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables the configuration settings for the TZRAM
aperture by programming the base/size of the aperture and
restricting access to it. We allow only the CPU to read/write
by programming the access configuration registers to 0.
Change-Id: Ie16ad29f4c5ec7aafa972b0a0230b4790ad5619e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Commit c073fda1c6 upstream changed the
return type for `plat_get_syscnt_freq()` from uint64_t to unsigned
long long.
This patch modifies the return type for the Tegra186 platform.
Change-Id: Ic9e5c364b90972265576e271582a4347e5eaa6eb
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables ECC and Parity Protection for Cortex-A57 CPUs during boot,
for Tegra186 A02p SKUs.
Change-Id: I8522a6cb61f5e4fa9e0471f558a0c3ee8078370e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Uncore perfmon appears to the CPU as a set of uncore perfmon registers
which can be read and written using the ARI interface. The MCE code
sequence handles reads and writes to these registers by manipulating
the underlying T186 uncore hardware.
To access an uncore perfmon register, CPU software writes the ARI
request registers to specify
* whether the operation is a read or a write,
* which uncore perfmon register to access,
* the uncore perfmon unit, group, and counter number (if necessary),
* the data to write (if the operation is a write).
It then initiates an ARI request to run the uncore perfmon sequence in
the MCE and reads the resulting value of the uncore perfmon register
and any status information from the ARI response registers.
The NS world's MCE driver issues MCE_CMD_UNCORE_PERFMON_REQ command
for the EL3 layer to start the entire sequence. Once the request
completes, the NS world would receive the command status in the X0
register and the command data in the X1 register.
Change-Id: I20bf2eca2385f7c8baa81e9445617ae711ecceea
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch implements the `get_target_pwr_state` handler for Tegra186
SoCs. The SoC port uses this handler to find out the cluster/system
state during CPU_SUSPEND, CPU_OFF and SYSTEM_SUSPEND calls.
The MCE firmware controls the power state of the CPU/CLuster/System,
so we query it to get the state and act accordingly.
Change-Id: I86633d8d79aec7dcb405d2301ac69910f93110fe
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds a helper function to the MCE driver to allow its
clients to issue UPDATE_CSTATE_INFO requests, without having to
setup the CPU context struct.
We introduced a struct to encapsulate the request parameters, that
clients can pass on to the MCE driver. The MCE driver gets the
parameters from the struct and programs the hardware accordingly.
Change-Id: I02bce57506c4ccd90da82127805d6b564375cbf1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Juno platform Makefile is responsible for enabling all the relevant
errata. As the Juno platform port does not know which revision of Juno
the TF
is compiled for, the revision of the cores are unknown and so all errata
up to this date are needed on at least one revision of Juno.
Change-Id: I38e1d6efc17e703f2bd55e0714f8d8fa4778f696
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
This patch resets the CPU power state info when we online any CPU. The
NS world software would re-init the CPU power state after the CPU gets
online anyways. This allows us to maintain proper CPU/cluster power
states in the MCE firmware at all times.
Change-Id: Ib24054f53df720a4f88d67b2cb5a2e036e475e14
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the "Recursion in included headers" error flagged by
Coverity.
Fixes coverity errors "31858: Recursion in included headers" and
"31857: Recursion in included headers"
Change-Id: Icf8838434b1808b396e743e47f59adc452546364
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the logic to calculate the higher bits for TZRAM's base/end
addresses.
Fixes coverity error "31853: Wrong operator used (CONSTANT_EXPRESSION_RESULT)"
Change-Id: Iff62ef18cba59cd41ad63a5c71664872728356a8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch modifies some of the functions in ARM platform layer to cater
for the case when multi-threading `MT` is set in MPIDR. A new build flag
`ARM_PLAT_MT` is added, and when enabled, the functions accessing MPIDR
now assume that the `MT` bit is set for the platform and access the bit
fields accordingly.
Also, a new API plat_arm_get_cpu_pe_count is added when `ARM_PLAT_MT` is
enabled, returning the PE count within the physical cpu corresponding to
`mpidr`.
Change-Id: I04ccf212ac3054a60882761f4087bae299af13cb
Signed-off-by: Summer Qin <summer.qin@arm.com>
This patch fixes the programming logic for the Video memory carveout's
size. The Memory Controller expects the size in terms of MBs instead
of bytes.
Change-Id: Ia8261b737448bae9a435fe21ab336126785d4279
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch removes stream ID override for the Security Engine
hardware block as its stream ID is programmed by the NS world
driver.
Original change by Mallikarjun Kasoju <mkasoju@nvidia.com>
Change-Id: Ia6523c1a1bb0a82bdeb878feb55670813899bdac
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch resets the power state info for CPUs when onlining,
as we set deepest power when offlining a core but that may not
be requested by non-secure sw which controls idle states. It
will re-init this info from non-secure software when the core
come online.
Original change by Prashant Gaikwad <pgaikwad@nvidia.com>
Change-Id: Id6c2fa2b821c7705aafbb561a62348c36fd3abd8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The Tegra simulation environment has limited capabilities. This patch
checks the chip's major and minor versions to decide the features to
enable/disable - MCE firmware version checking is disabled and limited
Memory Controller settings are enabled
Change-Id: I258a807cc3b83cdff14a9975b4ab4f9d1a9d7dcf
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch checks that the system is running with the supported MCE
firmware during boot. In case the firmware version does not match the
interface header version, then the system halts.
Change-Id: Ib82013fd1c1668efd6f0e4f36cd3662d339ac076
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the programming sequence for 'System Suspend' and
'Quasi power down' state entry. The device needs to update the
required power state before querying the MCE firmware to see the
entry to that power state is allowed.
Original change by Allen Yu <alleny@nvidia.com>
Change-Id: I65e03754322188af913fabf41f29d1c3595afd85
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch programs the default CPU wake mask during CPU_SUSPEND. This
reduces the CPU_SUSPEND latency as the system has to send one less SMC
before issuing the actual suspend request.
Original change by Krishna Sitaraman <ksitaraman@nvidia.com>
Change-Id: I1f9351dde4ab30936070e9f42c2882fa691cbe46
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch clears the system cstate when offlining a CPU core as we
need to update the sytem cstate to SC7 only when we enter system
suspend.
Original change by Prashant Gaikwad <pgaikwad@nvidia.com>
Change-Id: I1cff9bbab4db7d390a491c8939aea5db6c6b5c59
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables overrides for APE domains to allow the chip verification
software harness (MODS) to execute its test cases.
Original change by Harvey Hsieh <hhsieh@nvidia.com>
Change-Id: I09b22376068c5b65d89c2a53154ccb2c60d955bd
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds a new interface to allow for making an ARI call that
will enable LATIC for the chip verification software harness.
LATIC allows some MINI ISMs to be read in the CCPLEX. The ISMs are
used for various measurements relevant ot particular locations in
Silicon. They are small counters which can be polled to determine
how fast a particular location in the Silicon is.
Original change by Guy Sotomayor <gsotomayor@nvidia.com>
Change-Id: Ifb49b8863a009d4cdd5d1ba38a23b5374500a4b3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support to save the BL31 state to the TZDRAM
before entering system suspend. The TZRAM loses state during
system suspend and so we need to copy the entire BL31 code to
TZDRAM before entering the state.
In order to restore the state on exiting system suspend, a new
CPU reset handler is implemented which gets copied to TZDRAM
during boot. TO keep things simple we use this same reset handler
for booting secondary CPUs too.
Change-Id: I770f799c255d22279b5cdb9b4d587d3a4c54fad7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch reprograms MSS to make ROC deal with ordering of
MC traffic after boot and system suspend exit. This is needed
as device boots with MSS having all control but POR wants ROC
to deal with the ordering. Performance is expected to improve
with ROC but since no one has really tested the performance,
keep the option configurable for now by introducing a platform
level makefile variable.
Change-Id: I2e782fea138ccf9d281eb043a6b2c3bb97c839a7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds the chip level support for System Suspend entry
and exit. As part of the entry sequence we first query the MCE
firmware to check if it is safe to enter system suspend. Once
we get a green light, we save hardware block settings and enter
the power state. As expected, all the hardware settings are
restored once we exit the power state.
Change-Id: I6d192d7568d6a555eb10efdfd45f6d79c20f74ea
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The memory controller loses its settings when the device enters system
suspend state.
This patch adds a handler to restore the Video Memory settings in the
memory controller, which would be called after exiting the system suspend
state.
Change-Id: I1ac12426d7290ac1452983d3c9e05fabbf3327fa
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds a device driver for the SMMU hardware block on
Tegra186 SoCs. We use the generic ARM SMMU-500 IP block on
Tegra186. The driver only supports saving the SMMU settings
before entering system suspend. The MC driver and the NS world
clients take care of programming their own settings.
Change-Id: Iab5a90310ee10f6bc8745451ce50952ab3de7188
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Replace the occurrences of signed condition codes where it was
unnecessary by an unsigned test as the unsigned tests allow the full
range of unsigned values to be used without inverting the result with
some large operands.
This reverts commit ee2c909947e0a9c4a2562689a7bfc863bc4794f9.
Change-Id: Ibaa5e8dfae6ad65bada3cda5f683d181fee37e53
Acked-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
This patch adds support for the SC8 system power off state. This
state keeps the sensor subsystem powered ON while powering down
the remaining parts of the SoC. The CPUs and DRAM are powered down
as part of this state entry and perform a cold boot when exiting SC8.
Change-Id: Iba65c661a7fe077a0d696f114bab3b4595e19a0d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch disables the DCO operations when we turn OFF a
CPU. DCO operations are still ON when a CPU enters a power
down suspend state.
Change-Id: I954a800209ffcc9ab43a77f04040608cbbbd9055
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch registers all the FIQ interrupt sources during platform
setup. Currently we support AON and TOP watchdog timer interrupts.
Change-Id: Ibccd866f00d6b08b574f765538525f95b49c5549
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
For all APE clients (APER, APEW, APEDMAR, APEDMAW) set NO_OVERRIDE
for MC_SID_CFG as ACAST/ADAST will be setup with the required SIDs
ie. 0x7F & 0x1E.
Original change by Nitin Kumbhar <nkumbhar@nvidia.com>
Change-Id: Idec981b3537cc95dac6ec37cdaa38bc45b16d232
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch sets the Memory Controller's TXN_OVERRIDE registers
for most write clients to CGID_ADR. This ensures ordering is maintained.
In some cases WAW ordering problems could occur. There are different
settings for Tegra version A01 v A02.
Original changes by Alex Waterman <alexw@nvidia.com>
Change-Id: I82ea02afa43a24250ed56985757b83e78e71178c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The GPU is the real consumer of the video protected memory region
and it needs to be in reset to pick up the new region.
This patch checks if the GPU is in reset before we program the new
video protected memory region settings.
Change-Id: I44f553bfcf07b1975abad53b245954be966c8aeb
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the incorrect override settings for the SCE
hardware block.
Original change by Pekka Pessi <ppessi@nvidia.com>
Change-Id: I33db55d6004331988b52ca70157aab1409f4829f
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the logic used to calculate the CPU index for
storing the per-cpu wake times. We use the MIDR register to
calculate the CPU index now. This allows us to store values for
Denver/A57 CPUs properly.
Change-Id: I9df0377afd4b92bbdaea495c0df06a9780a99d09
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch supports the TEGRA_SIP_NEW_VIDEOMEM_REGION SiP call to
program new video memory carveout settings from the NS world.
Change-Id: If9ed818fe71e6cb7461f225090105a4d8883b7a2
Signed-off-by: Wayne Lin <wlin@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support for the C6 and C7 CPU_SUSPEND states. C6 is
an idle state while C7 is a powerdown state.
The MCE block takes care of the entry/exit to/from these core power
states and hence we call the corresponding MCE handler to process
these requests. The NS driver passes the tentative time that the
core is expected to stay in this state as part of the power_state
parameter, which we store in a per-cpu array and pass it to the
MCE block.
Change-Id: I152acb11ab93d91fb866da2129b1795843dfa39b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch programs the Memory controller's control registers
to disable non-secure accesses to the TZRAM. In case these
registers are already programmed by the BL2/BL30, then the
driver just bails out.
Change-Id: Ia1416988050e3d067296373060c717a260499122
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support for the newer platform handler functions. Commit
I6db74b020b141048b6b8c03e1bef7ed8f72fd75b merges the upstream code which
has already moved all the upstream supported platforms over to these
handler functions.
Change-Id: I621eff038f3c0dc1b90793edcd4dd7c71b196045
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch implements the 'prepare_system_reset' handler to
issue the 'system reset' command to the MCE.
Change-Id: I83d8d0b4167aac5963d640fe77d5754dc7ef05b1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch implements the CPU_OFF handler for powering down
a CPU using the MCE driver.
Change-Id: I8d455005d0b547cc61cc7778bfe9eb84b7e5480c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The System Counter Frequency has been updated to 31.25MHz after
some experiments as the previous value was too high.
Change-Id: I79986ee1c0c88700a3a2b1dbff2d3f00c0c412b9
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Tegra186 has an on-die, 320KB, "System RAM" memory. Out of the total
size, 256KB are allocated for the CPU TrustZone binaries - EL3 monitor
and Trusted OS.
This patch changes the base address for bl31.bin to the SysRAM base
address. The carveout is too small for the Trusted OS, so we relocate
only the monitor binary.
Change-Id: Ib4b667ff2a7a619589851338f9d0bfb02078c575
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch issues the 'System Off' ARI to power off the entire
system from the 'prepare_system_off' handler.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch add code to power on/off the secondary CPUs on the Tegra186
chip. The MCE block is the actual hardware that takes care of the
power on/off sequence. We pass the constructed CPU #, depending on the
MIDR_IMPL field, to the MCE CPU handlers.
This patch also programs the reset vector addresses to allow the
CPUs to power on through the monitor and then jump to the linux
world.
Change-Id: Idc164586cda91c2009d66f3e09bf4464de9662db
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds the new SiP SMC calls to allow the NS world to
interact with the MCE hardware block on Tegra186 chips.
Change-Id: I79c6b9f76d68a87abd57a940613ec070562d2eac
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The CPU Complex (CCPLEX) Power Manager (Denver MCE, or DMCE) is an
offload engine for BPMP to do voltage related sequencing and for
hardware requests to be handled in a better latency than BPMP-firmware.
There are two interfaces to the MCEs - Abstract Request Interface (ARI)
and the traditional NVGINDEX/NVGDATA interface.
MCE supports various commands which can be used by CPUs - ARM as well
as Denver, for power management and reset functionality. Since the
linux kernel is the master for all these scenarios, each MCE command
can be issued by a corresponding SMC. These SMCs have been moved to
SiP SMC space as they are specific to the Tegra186 SoC.
Change-Id: I67bee83d2289a8ab63bc5556e5744e5043803e51
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Tegra186 is the newest SoC in the Tegra family which consists
of two CPU clusters - Denver and A57. The Denver cluster hosts
two next gen Denver15 CPUs while the A57 cluster hosts four ARM
Cortex-A57 CPUs. Unlike previous Tegra generations, all the six
cores on this SoC would be available to the system at the same
time and individual clusters can be powered down to conserve
power.
Change-Id: Id0c9919dbf5186d2938603e0b11e821b5892985e
Signed-off-by: Wayne Lin <wlin@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds driver for the Memory Controller (v2) in the newer
Tegra SoCs. The newer hardware uses ARM's SMMU hardware instead of
the proprietary block in the past.
Change-Id: I78359da780dc840213b6e99954e45e34428d4fff
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch opens up the interfaces to read the chip's major/minor versions
for all Tegra drivers to use.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
These source file definitions should be defined in generic
Makefiles so that all platforms can benefit. Ensure that the
symbols are properly marked as weak so they can be overridden
by platforms.
NOTE: This change is a potential compatibility break for
non-upstream platforms.
Change-Id: I7b892efa9f2d6d216931360dc6c436e1d10cffed
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
The NVidia Tegra 210 SoC contains Cortex-A53 CPUs which are affected by
erratum 855873.
Enable the workaround that TF provides to fix this erratum.
Change-Id: I6cef4ac60ae745e9ce299ee22c93b9d2c4f6c5f2
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The Mediatek 8173 SoC contains Cortex-A53 CPUs which are affected by
erratum 855873.
Enable the workaround that TF provides to fix this erratum.
Change-Id: I6e1c7822c320d81bdd46b8942d1d755883dac1f5
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
ARM erratum 855873 applies to all Cortex-A53 CPUs.
The recommended workaround is to promote "data cache clean"
instructions to "data cache clean and invalidate" instructions.
For core revisions of r0p3 and later this can be done by setting a bit
in the CPUACTLR_EL1 register, so that hardware takes care of the promotion.
As CPUACTLR_EL1 is both IMPLEMENTATION DEFINED and can be trapped to EL3,
we set the bit in firmware.
Also we dump this register upon crashing to provide more debug
information.
Enable the workaround for the Juno boards.
Change-Id: I3840114291958a406574ab6c49b01a9d9847fec8
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Modify ARM common makefile to use version 2 of the translation tables
library and include the new header in C files.
Simplify header dependencies related to this library to simplify the
change.
The following table contains information about the size increase in
bytes for BL1 after applying this patch. The code has been compiled for
different configurations of FVP in AArch64 mode with compiler GCC 4.9.3
20150413. The sizes have been calculated with the output of `nm` by
adding the size of all regions and comparing the total size before and
after the change. They are sumarized in the table below:
text bss data total
Release +660 -20 +88 +728
Debug +740 -20 +242 +962
Debug (LOG_LEVEL=50) +1120 -20 +317 +1417
Change-Id: I539e307f158ab71e3a8b771640001fc1bf431b29
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
TLBI instructions for EL3 won't have the desired effect under specific
circumstances in Cortex-A57 r0p0. The workaround is to execute DSB and
TLBI twice each time.
Even though this errata is only needed in r0p0, the current errata
framework is not prepared to apply run-time workarounds. The current one
is always applied if compiled in, regardless of the CPU or its revision.
This errata has been enabled for Juno.
The `DSB` instruction used when initializing the translation tables has
been changed to `DSB ISH` as an optimization and to be consistent with
the barriers used for the workaround.
Change-Id: Ifc1d70b79cb5e0d87e90d88d376a59385667d338
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The files affected by this patch don't really depend on `xlat_tables.h`.
By changing the included file it becomes easier to switch between the
two versions of the translation tables library.
Change-Id: Idae9171c490e0865cb55883b19eaf942457c4ccc
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This patch enables the SEPARATE_CODE_AND_RODATA build flag for all
Tegra platforms, to allow setting proper MMU attributes for the RO
data and the code.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The linux kernel v3.10 does not use System Suspend function ID, whereas
v4.4 uses it. This means affinity levels 0/1 will have different state id
values during System Suspend entry. This patch updates the assert criteria
to check both the state id values.
Change-Id: I07fcaf99501cc9622e40d0a2c1eb4a4a160be10a
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch allows the NS world to pass 64-bit base address for
the Video Memory carveout region.
Change-Id: I7e47cc1f5425bd39c6763755b801517013e1e0cd
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch increases the ADDR_SPACE_SIZE macro (virtual address)
to 35 bits, to support max memory of 32G, for all Tegra platforms.
Change-Id: I8e6861601d3a667d7428988c7596b0adebfa0548
Signed-off-by: Steven kao <skao@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Some platforms might want to keep the uart console disabled
during boot. This patch checks if the platform supports a
console, before calling console_init().
Change-Id: Icc9c59cb979d91fd0a72e4732403b3284bdd2dfc
Signed-off-by: Damon Duan <danield@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch modifies the TZDRAM base address to the new aperture
allocated by the bootloader.
Change-Id: Id158d15b1ec9aa681136d258e90fbba930aebf92
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch sets the core power state during cluster power down,
so that the 'get_target_pwr_state' handler can calculate the
proper states for all the affinity levels.
Change-Id: If4adb001011208916427ee1623c6c923bed99985
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the 'tegra_soc_get_target_pwr_state' handler used to
calculate the proper state for each of the affinity levels.
Change-Id: Id16bd15b96f0fc633ffeac2d7a390592fbd0454b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch removes the console_init() from runtime_setup() as we already
initialize it earlier and disables/enables it across "System Suspend".
Change-Id: I992d3ca56ff4797faf83e8d7fa52c0ef3e1c3367
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support to identify the underlying platform
on which we are running. The currently supported platforms
are actual silicon and simulation platforms.
Change-Id: Iadf96e79ec663b3dbd1a18e9bb95ffcdb82fc8af
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch makes the default MP definitions of plat_get_my_stack()
and plat_set_my_stack() as weak so that they can be overridden by
the AArch32 Secure Payload if it requires.
Change-Id: I3b6ddff5750443a776505e3023ff2934227592b6
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Remove struct rockchip_pm_ops_cb and instead of using weak functions
implement; in this way we want the codes look clear and simple;
Change-Id: Ib9e8a5e932fdfc2b3e6a1ec502c40dfe720ac400
Signed-off-by: tony.xie <tony.xie@rock-chips.com>
This patch implements a per-soc handler to calculate the target
power state for the cluster/system. A weak implementation of the
handler is provided for platforms to use by default.
For SoCs with multiple CPU clusters, this handler would provide
the individual cluster/system state, allowing the PSCI service to
flush caches during cluster/system power down.
Change-Id: I568cdb42204f9841a8430bd9105bd694f71cf91d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support to relocate the BL32 image from the NS
memory to TZDRAM during cold boot. The NS memory buffer is
cleared out after the process completes.
Change-Id: I1a033ffe73b8c309449f874d5187708d0a8846d2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch implements handlers which platforms can override to
get the BL31 arguments passed by the previous bootloader.
Change-Id: I6b9628a984644ce1b5de5aa6d7cd890e57241d89
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch returns pointer to the BL32 entrypoint info only if
it is valid.
Change-Id: I71ce3c4626681753c94f3a7bbaa50c26c74874cb
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch configures the TZDRAM fence during early platform
setup to allow the memory controller to enable DRAM encryption
before the TZDRAM actually gets used.
Change-Id: I0169ef9dda75699527b4e30c9e617a9036ba1d76
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch restores the TZRAM fence and the access permissions
on exiting the "System Suspend" state.
Change-Id: Ie313fca5a861c73f80df9639b01115780fb6e217
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables L2 ECC and Parity Protection for ARM Cortex-A57 CPUs
for Tegra SoCs.
Change-Id: I038fcd529991d0201a4951ce2730ab71b1c980f9
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch modifies the secure IRQ registration process to allow platforms
to specify the target CPUs as well as the owner of the IRQ. IRQs "owned"
by the EL3 would return INTR_TYPE_EL3 whereas those owned by the Trusted
OS would return INTR_TYPE_S_EL1 as a result.
Change-Id: I528f7c8220d0ae0c0f354e78d69e188abb666ef6
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds a handler for FIQ interrupts triggered when
the CPU is in the NS world. The handler stores the NS world's
context along with ELR_EL3/SPSR_EL3.
The NS world driver issues an SMC initially to register it's
handler. The monitor firmware stores this handler address and
jumps to it when the FIQ interrupt fires. Upon entry into the
NS world the driver then issues another SMC to get the CPU
context when the FIQ fired. This allows the NS world driver to
determine the CPU state and call stack when the interrupt
fired. Generally, systems register watchdog interrupts as FIQs
which are then used to get the CPU state during hangs/crashes.
Change-Id: I733af61a08d1318c75acedbe9569a758744edd0c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Tegra chips support multiple FIQ interrupt sources. These interrupts
are enabled in the GICD/GICC interfaces by the tegra_gic driver. A
new FIQ handler would be added in a subsequent change which can be
registered by the platform code.
This patch adds the GIC programming as part of the tegra_gic_setup()
which now takes an array of all the FIQ interrupts to be enabled for
the platform. The Tegra132 and Tegra210 platforms right now do not
register for any FIQ interrupts themselves, but will definitely use
this support in the future.
Change-Id: I0ea164be901cd6681167028fea0567399f18d4b8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds a platform handler to calculate the proper target power
level at the specified affinity level.
Tegra platforms assign a local state value in order of decreasing depth
of the power state i.e. for two power states X & Y, if X < Y then X
represents a shallower power state than Y. As a result, the coordinated
target local power state for a power domain will be the maximum of the
requested local power state values.
Change-Id: I67360684b7f5b783fcfdd605b96da5375fa05417
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch includes platform_def.h required to access UART macros -
"TEGRA_BOOT_UART_CLK_IN_HZ" and "TEGRA_CONSOLE_BAUDRATE" from
tegra_helpers.S.
Change-Id: Ieb63968a48dc299d03e81ddeb1ccc871cf3397a1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch removes the restriction of allowing SiP calls only from the
non-secure world. The secure world can issue SiP calls as a result of
this patch now.
Change-Id: Idd64e893ae8e114bba0196872d3ec544cac150bf
Signed-off-by: Wayne Lin <wlin@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds a weak handler for early platform setup which
can be overriden by the soc-specific handlers to perform any
early setup tasks.
Change-Id: I1a7a98d59b2332a3030c6dca5a9b7be977177326
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support to relocate BL3-1 code to BL31_BASE in case
we cold boot to a different address. This is particularly useful to
maintain compatibility with legacy BL2 code.
This patch also checks to see if the image base address matches either
the TZDRAM or TZSRAM base.
Change-Id: I72c96d7f89076701a6ac2537d4c06565c54dab9c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This change disables the cache non-temporal hints for A57 and
A53 CPUs on Tegra.
Change-Id: I279d95aec5afbc3ca3cc4b34aa16de3f2c83a4fc
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Sorry to miss the security configuration for SRAM, if we don't support
it, somebody may modify the comment of SRAM in the non-secure space.
Let's fix this issue.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
The F1 CAS latency setting was not bit shifted, which resulted in
setting the DRAM additive latency value instead.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
On resume, we use the DFS hardware to switch frequency index,
followed by a full training sequence on that index. Leaving
the DFS training modules enabled causes issues with the full
training done at resume. We also only needs these enabled
during a call to ddr_set_rate during runtime, so there's no
issue disabling them at the end of ddr_set_rate.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
This moves the setting of the DQS drive strength to the M0 to minimize
the impact on DDR transactions. We need to have the DQS drive strength
changed for data training, which is triggered by the M0, but it also
needs to be changed back when data training is finished.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
This removes an optimization to not recalculate parameters if the
frequency index being switched to hold the next frequency. This is
because some registers do not have a copy per frequency index, so this
optimization might be causing problems.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
We were getting far off values on resume for the RX_CAL_DQS values.
This saves and restores the values for suspend/resume until the root
of the problem is figured out
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
These macros were accidentally deleted in a previous cleanup. This
slipped through because the code using them is currently unused, but
that may change in the future.
Signed-off-by: Julius Werner <jwerner@chromium.org>
This patch shuffles the M0 Makefile flags around a bit trying to make
their purpose clearer and remove duplication. Since all three build
steps (compiling, assembling, linking) actually call GCC, remove the
misleading aliases $(AS) and $(LD) to avoid confusion that those tools
might be called directly. Split flags into a common group that has
meaning for all three steps and separate variables specific to each
step. Remove -nostartfiles which is a strict subset of -nostdlib.
Also add explicit parameters for -mfloat-abi=soft, -fomit-frame-pointer
and -fno-common. If omitted these settings depend on the toolchain's
built-in default and cause various problems if they resolve to
unexpected values.
Signed-off-by: Julius Werner <jwerner@chromium.org>
The goal is that make clear the secure and SoC codes. Now cleaning them
will help secure code extensions for RK3399 in the future.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Maybe the coreboot will reference the BL31 parameters (e.g the TZRAM_BASE
and TZRAM_SIZE for DDR secure regions), we can split them and don't have
to hardcode the range in two places.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Move the BL31 loaded base address 0x10000 to 0x1000, and configure
the the memory range 0~1MB is secure, the goal is that make sure
the BL31 image will be not modified.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
So far, there are more and more features are supported on the RK3399,
meanwhile, these features are increasingly being defined and intertwined.
It's time to clean up and make them clearer.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
This removes waiting for vblank on the M0 during ddrfreq transitions.
That will now be done in the kernel to allow scheduling to be done on
the CPU core that changes the ddr frequency. Waiting for vblank in
the M0 would have the CPU core that waits on the M0 spin looping for
up to 16ms (1 frame for the display).
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
we will set PMU_CRU_GATEDIS_CON0 when idle port, it will enable
all clock, for save power consumption, we need to restore old value
when finish it.
Signed-off-by: Lin Huang <hl@rock-chips.com>
As rk3399 TRM1.1 document show, when set PMU_CRU_GATEDIS_CON0/1
register, it need set the write_mask bit (bit16 ~ bit31), but as
we test, it not need it. So need to correct the setting way, otherwise
it will set wrong value to this register.
Signed-off-by: Lin Huang <hl@rock-chips.com>
We found that the DUT will be hanged if we don't set the bit_1 of the
PMUCRU_GATEDIS_CON0. But, from the TRM, there is weird that the bit_1
is set the clk_center1_gating_dis, not clk_pmum0_gating_dis. Is the
TRM incorrect? We need to check it with the IC team and re-clean the
commit message and explain it tomorrow.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
This patch do following things:
1. Request hresetn_cm0s_pmu_req first then request
poresetn_cm0s_pmu_req during M0 enable.
2. Do not diable M0 clock for ddr dvfs.
3. Correct the clk_pmum0_gating_dis bit, it is BIT0 not BIT1
4. do not set/clear hclk_noc_pmu_en in M0 code, it does not relate
to the M0 clock.
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
When vop is disabled and we read the vop register the system will
hang, so check vop status when we wait for the DMA finish flag to
avoid this sitiuation. This is done by checking for standby, DMA stop
mode, and disabled window states. Any one of these will prevent the
DMA finish flag from triggering.
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
There is system timer in m0, we can use it to implement a set of
stopwatch functions for measuring timeouts.
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
The phy pll needs to get 2X frequency to the DDR, so set the
pll_postdiv to 0.
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
This fixes a hang with setting the DRAM rate based on a race condition
with the M0 which sets the DRAM rate. The AP can also starve the M0,
so this also delays the AP reads to the DONE parameter for the M0.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
This enables per CS training at 666MHz and above for ddrfreq per
vendor recommendation. Since the threshold was used for latency was
the same value, this also adds a new value for that.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
This patch sets the frequency configuration of the next DRAM DFS index
to the configuration of the current index. This does not perform a
frequency transition. It just configures registers so the training on
resume for both indices will be correct.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
We used dcf do ddr frequency scaling, but we just include a dcf
binary, it hard to maintain later, we have M0 compile flow in ATF,
and M0 can also work for ddr frequency scaling, so let's use it.
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Since the ATF project, we usually use the mmio_read_32 and
mmio_write_32. And the mmio_write_32, the firse parameter
is ADDR, the second is VALUE. In order to style consistency:
1/ rename readl/writel to mmio_read_32/mmio_write_32
2/ for keeping the same with mmio_write_32 in the ATF project,
swap the order of the parameters for M0 mmio_write_32
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Lin Huang <hl@rock-chips.com>
when dram frequency below 260MHz, phy master dll may unlock, so
let phy master dll working at dll bypass mode when frequency is
below 260MHz.
Signed-off-by: Lin Huang <hl@rock-chips.com>
we can reuse the dram config from loader, so we can remove dram_init()
and dts_timing_receive() funciton in dram.c, add the dram_set_odt_pd()
function to get the odt and auto power down parameter from kernel.
This also removes the dcf_code_init function to allow the system to
actually boot.
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
This patch adds the pwr_domain_power_down_wfi() handler for Tegra
platforms which in turn executes the soc specific `power_down_wfi`
handler.
Change-Id: I5deecc09959db3c3d73f928f5c871966331cfd95
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch maps the TZDRAM carveout used by the BL31. In the near
future BL31 would be running from the TZRAM for security and
performance reasons. The only downside to this solution is that
the TZRAM loses its state in System Suspend. So, we map the TZDRAM
carveout that the BL31 would use to save its state before entering
System Suspend.
Change-Id: Id5bda7e9864afd270cf86418c703fa61c2cb095f
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch increases the BL31 image size for all Tegra platforms to
256KB, so that we can relocate BL31 to TZSRAM on supported chips.
Change-Id: I467063c68632b53b5d4ef8ff1f76f5988096bd9c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch uses the Memory controller driver's handler to restore
its settings and moves the other chip specific code to their own
'pwr_domain_on_finish' handlers.
Change-Id: I3c9d23bdab9e2e3c05034ff6812cf941ccd7a75e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch moves the code to disable DCO operations out from common
CPU files. This allows the platform code to call thsi API as and
when required. There are certain CPU power down states which require
the DCO to be kept ON and platforms can decide selectively now.
Change-Id: Icb946fe2545a7d8c5903c420d1ee169c4921a2d1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables the PSCI_EXTENDED_STATE_ID macro. Tegra platforms
have moved on to using the extended state ID for CPU_SUSPEND, where
the NS world passes the state ID and wakeup time as part of the
state ID field.
Change-Id: Ie8b0fec285d8b2330bc26ff239a4f628425c9fcf
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The platform power states, PLAT_MAX_RET_STATE and PLAT_MAX_OFF_STATE,
can change on Tegra SoCs and so should be defined per-soc.
This patch moves these macro definitions to individual SoC's tegra_def.h
files.
Change-Id: Ib9b2752bc4d79cef6f79bee49882d340f71977a2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch introduces a function to secure the on-chip TZRAM memory. The
Tegra132 and Tegra210 chips do not have a compelling use case to lock the
TZRAM. The trusted OS owns the TZRAM aperture on these chips and so it
can take care of locking the aperture. This might not be true for future
chips and this patch makes the TZRAM programming flexible.
Change-Id: I3ac9f1de1b792ccd23d4ded274784bbab2ea224a
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables the runtime console for all Tegra platforms
before exiting BL31. This would enable debug/error prints to be
always displayed on the UART console.
Change-Id: Ic48d61d05b0ab07973d6fc2dc6b68733a42a3f63
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch introduces a power down handler which can be overriden
by SoCs to customise the power down process. The current SoCs do
not have a way of powering down the entire system as external PMIC
chips are involved in the process.
But future SoCs will have a way to power off the entire system
without talking to an external PMIC.
Change-Id: Ie7750714141a29cb0a1a616fafc531c4f11d0985
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch implements a handler for common SiP calls. A weak
implementation for the SoC-specific handler has been provided
which can be overridden by SoCs to implement any custom SiP
calls.
Change-Id: I45122892a84ea35d7b44be0f35dc15f6bb95193e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The BL2 fills in the UART controller ID to be used as the normal as
well as the crash console on Tegra platforms. The controller ID to
UART controller base address mapping is handled by each Tegra SoC
the base addresses might change across Tegra chips.
This patch adds the handler to parse the platform params to get the
UART ID for the per-soc handlers.
Change-Id: I4d167b20a59aaf52a31e2a8edf94d8d6f89598fa
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds another member, tzdram_base, to the plat_params_from_bl2 struct
in order to store the TZDRAM carveout base address used to load the Trusted OS.
The monitor programs the memory controller with the TZDRAM base and size in order
to deny any accesses from the NS world.
Change-Id: If39b8674d548175d7ccb6525c18d196ae8a8506c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch renames the current Memory Controller driver files to
"_v1". This is done to add a driver for the new Memory Controller
hardware (v2).
Change-Id: I668dbba42f6ee0db2f59a7103f0ae7e1d4684ecf
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch checks that the pointers to BL3-3 and BL3-2 ep_info
structs are valid before accessing them. Add some INFO prints
in the BL3-1 setup path for early debugging purposes.
Change-Id: I62b23fa870f1b2fb783c8de69aab819f1749d15a
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch modifies platform_get_core_pos() to use the Cluster ID
field as well to calculate the final index value. This helps the
system to store CPU data for multi-cluster configurations.
Change-Id: I76e35f723f741e995c6c9156e9d61b0b2cdd2709
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables the processor retention and L2/CPUECTLR read/write
access from the NS world only for Cortex-A57 CPUs on the Tegra SoCs.
Change-Id: I9941a67686ea149cb95d80716fa1d03645325445
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch moves these address translation helper macros to individual
Tegra SoC makefiles to provide more control.
Change-Id: Ieab53c457c73747bd0deb250459befb5b7b9363f
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch converts the common SiP handler to SoC specific SiP
handler. T210 and T132 have different SiP SMCs and so it makes
sense to move the SiP handler to soc/t132 and soc/t210 folders.
Change-Id: Idfe48384d63641137d74a095432df4724986b241
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Pritesh Raithatha
davidcunado-arm
Varun Wadekar
Harvey Hsieh
Rich Wiley
Steven Kao
Caesar Wang
Soren Brinkmann
Mustafa Yigit Bilgen
Vivek Aseeja
Krishna Sitaraman
Masahiro Yamada
Paul Kocialkowski
Douglas Raillard
dp-arm
Antonio Nino Diaz
Summer Qin
Andre Przywara
tony.xie
Damon Duan
Soby Mathew
Wayne Lin
Xing Zheng
Derek Basehore
Julius Werner
Lin Huang