Clear the cpuidle flag when resuming from idle. This flag is set
when entering idle, and if it remains set when resuming, it can
prevent the cluster from powering off during the next system
suspend operation. During system suspend, all CPUs are plugged
out except the last CPU, which is suspended. If any of the
cpuidle flags are set at this point, the last CPU will be stuck
in a WFI loop and will not be powered off.
This problem only occurs during system suspend.
Signed-off-by: Tao Wang <kevin.wangtao@linaro.org>
The generic LOAD_IMAGE_V2 framework has been merged and enable for almost
all the arm platform. Because qemu platform doesn't share those common
files with arm, QEMU haven't got this support yet.
This patch add all the necessary code the files for adding LOAD_IMAGE_V2
support on QEMU and enable it as default.
FixesARM-software/tf-issues#507
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Assembler programmers are used to being able to define functions with a
specific aligment with a pattern like this:
.align X
myfunction:
However, this pattern is subtly broken when instead of a direct label
like 'myfunction:', you use the 'func myfunction' macro that's standard
in Trusted Firmware. Since the func macro declares a new section for the
function, the .align directive written above it actually applies to the
*previous* section in the assembly file, and the function it was
supposed to apply to is linked with default alignment.
An extreme case can be seen in Rockchip's plat_helpers.S which contains
this code:
[...]
endfunc plat_crash_console_putc
.align 16
func platform_cpu_warmboot
[...]
This assembles into the following plat_helpers.o:
Sections:
Idx Name Size [...] Algn
9 .text.plat_crash_console_putc 00010000 [...] 2**16
10 .text.platform_cpu_warmboot 00000080 [...] 2**3
As can be seen, the *previous* function actually got the alignment
constraint, and it is also 64KB big even though it contains only two
instructions, because the .align directive at the end of its section
forces the assembler to insert a giant sled of NOPs. The function we
actually wanted to align has the default constraint. This code only
works at all because the linker just happens to put the two functions
right behind each other when linking the final image, and since the end
of plat_crash_console_putc is aligned the start of platform_cpu_warmboot
will also be. But it still wastes almost 64KB of image space
unnecessarily, and it will break under certain circumstances (e.g. if
the plat_crash_console_putc function becomes unused and its section gets
garbage-collected out).
There's no real way to fix this with the existing func macro. Code like
func myfunc
.align X
happens to do the right thing, but is still not really correct code
(because the function label is inserted before the .align directive, so
the assembler is technically allowed to insert padding at the beginning
of the function which would then get executed as instructions if the
function was called). Therefore, this patch adds a new parameter with a
default value to the func macro that allows overriding its alignment.
Also fix up all existing instances of this dangerous antipattern.
Change-Id: I5696a07e2fde896f21e0e83644c95b7b6ac79a10
Signed-off-by: Julius Werner <jwerner@chromium.org>
Trusted OS may have extra images to be loaded. Load them one by one
and do the parsing. In this patch, ARM TF need to load up to 3 images
for optee os: header, pager and paged images. Header image is the info
about optee os and images. Pager image include pager code and data.
Paged image include the paging parts using virtual memory.
Change-Id: Ia3bcfa6d8a3ed7850deb5729654daca7b00be394
Signed-off-by: Summer Qin <summer.qin@arm.com>
Since Trusted OS firmware may have extra images, need to
assign new uuid and image id for them.
The TBBR chain of trust has been extended to add support
for the new images within the existing Trusted OS firmware
content certificate.
Change-Id: I678dac7ba1137e85c5779b05e0c4331134c10e06
Signed-off-by: Summer Qin <summer.qin@arm.com>
Revision C of the Base FVP has the same memory map as earlier revisions,
but has the following differences:
- Implements CCI550 instead of CCI400,
- Has a single instantiation of SMMUv3,
- CPU MPIDs are shifted left by one level, and has MT bit set in them.
The correct interconnect to program is chosen at run time based on the
FVP revision. Therefore, this patch implements FVP functions for
interconnect programming, rather than depending on ARM generic ones. The
macros used have been renamed to reflect this change.
Additionally, this patch initializes SMMUv3 as part of FVP early
platform setup.
New ARM config flags are introduced for feature queries at run time.
Change-Id: Ic7b7f080953a51fceaf62ce7daa6de0573801f09
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
The CCI crash dump macros assumes CCI base at build time. Since this
can't be the case for CCI on FVP, choose not to register dump CCI
registers for FVP.
Change-Id: I7374a037e7fd0a85b138e84b3cf0aa044262da97
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
ARM CPUs with multi-threading implementation has more than one
Processing Element in a single physical CPU. Such an implementation will
reflect the following changes in the MPIDR register:
- The MT bit set;
- Affinity levels pertaining to cluster and CPUs occupy one level
higher than in a single-threaded implementation, and the lowest
affinity level pertains to hardware threads. MPIDR affinity level
fields essentially appear shifted to left than otherwise.
The FVP port henceforth assumes that both properties above to be
concomitant on a given FVP platform.
To accommodate for varied MPIDR formats at run time, this patch
re-implements the FVP platform-specific functions that translates MPIDR
values to a linear indices, along with required validation. The same
treatment is applied for GICv3 MPIDR hashing function as well.
An FVP-specific build option FVP_MAX_PE_PER_CPU is introduced which
specifies the maximum number of threads implemented per CPU. For
backwards compatibility, its value defaults to 1.
Change-Id: I729b00d3e121d16ce9a03de4f9db36dfac580e3f
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
plat_get_my_stack is called from C, so it can't expect argument
registers to be preserved. Stash registers temporarily onto the stack
instead.
plat_set_my_stack is called during early init, when there exists no
stack. Use any register other than argument registers to stash temporary
values.
Change-Id: I98052e20671d0933201d45ec7a5affccd71ce08c
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
This patch implements the early suspend handler for Tegra SoCs. This
handler is empty for now and the actual support for a particular platform
would be added later.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Almost all the arm platform has switch to translation tables library v2 as
default. Because qemu platform doesn't use arm_common.mk like other arm
platforms, QEMU haven't switched to v2 yet.
This patch adds all the necessary code for adding translation tables
library v2 support on QEMU and use it as default.
FixesARM-software/tf-issues#508
Signed-off-by: Fu Wei <fu.wei@linaro.org>
In a previous patch, the xlat_ctx_t type has been made public.
This patch now makes the *_ctx() APIs public.
Each API now has a *_ctx() variant. Most of them were already implemented
and this patch just makes them public. However, some of them were missing
so this patch introduces them.
Now that all these APIs are public, there's no good reason for splitting
them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c).
Therefore, this patch moves all code into xlat_tables_internal.c and
removes xlat_tables_common.c. It removes it from the library's makefile
as well.
This last change introduces a compatibility break for platform ports
that specifically include the xlat_tables_common.c file instead of
including the library's Makefile. The UniPhier platform makefile has
been updated to now omit this file from the list of source files.
The prototype of mmap_add_region_ctx() has been slightly changed. The
mmap_region_t passed in argument needs to be constant because it gets
called from map_add(), which receives a constant region. The former
implementation of mmap_add() used to cast the const qualifier away,
which is not a good practice.
Also remove init_xlation_table(), which was a sub-function of
init_xlat_tables(). Now there's just init_xlat_tables() (and
init_xlat_tables_ctx()). Both names were too similar, which was
confusing. Besides, now that all the code is in a single file,
it's no longer needed to have 2 functions for that.
Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
After disconnect Jumper pin 1-2 in J15 header, the signal VBUS_DET is to
be pulled down to low level. This will assert the interrupt signal in
PMIC and trigger IRQ in GIC; the asserted signal from VBUS_DET is level
triggered and kernel reports the warning for unhooked interrupt handling;
and VBUS_DET stays with low level, this triggers IRQ storm in kernel.
This patch is to disable interrupt for VBUS_DET in PMIC, this can
dismiss the verbose log and IRQ storm after kernel booting.
[ 40.835279] irq 57: nobody cared (try booting with the "irqpoll" option)
[ 40.842075] CPU: 0 PID: 980 Comm: irq/57-hi655x-p Not tainted 4.4.77-568944-g576a0114dec8-dirty #667
[ 40.851303] Hardware name: HiKey Development Board (DT)
[ 40.856580] Call trace:
[ 40.859060] [<ffffff800808c4cc>] dump_backtrace+0x0/0x1e0
[ 40.864516] [<ffffff800808c8ac>] show_stack+0x20/0x28
[ 40.869622] [<ffffff80084b9688>] dump_stack+0xa8/0xe0
[ 40.874729] [<ffffff800812dd5c>] __report_bad_irq+0x40/0xec
[ 40.880360] [<ffffff800812e0bc>] note_interrupt+0x1e4/0x2d8
[ 40.885992] [<ffffff800812b11c>] handle_irq_event_percpu+0xd8/0x268
[ 40.892324] [<ffffff800812b2f8>] handle_irq_event+0x4c/0x7c
[ 40.897955] [<ffffff800812ecbc>] handle_level_irq+0xcc/0x178
[ 40.903672] [<ffffff800812a778>] generic_handle_irq+0x34/0x4c
[ 40.909481] [<ffffff80085074c8>] pl061_irq_handler+0xa8/0x124
[ 40.915286] [<ffffff800812a778>] generic_handle_irq+0x34/0x4c
[ 40.921092] [<ffffff800812a820>] __handle_domain_irq+0x90/0xf8
[ 40.926985] [<ffffff8008082620>] gic_handle_irq+0x58/0xa8
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
The DEVICE2 memory range is needed to access the Root of Trust Public
Key registers. This is not needed when Trusted Board Boot is disabled
so it's safer to not map it in this case. This also saves one level-2
page table in each of BL1 and BL2 images.
Also add some comments.
Change-Id: I67456b44f3fd5e145f6510a8499b7fdf720a7273
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
On ARM CSS platforms, the SCP_BL2/2U image is loaded below
BL1 read-write data. This same memory is used to load BL31
later on. But sufficient checks were not done to ensure that the
SCP_BL2 would not overwrite BL1 rw data. This patch adds the
required CASSERT checks to prevent overwrite into BL1 or BL2
memory by load of SCP_BL2/2U. Also the size of BL31 is increased
and SCP_BL2/2U size is decreased to accomodate it within the
allocated region.
Change-Id: I23b28b5e1589e91150852a06452bd52b273216ee
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
The SCP_BL2 is transferred to SCP during BL2 image load and authenticate
sequence. The Boot-Over-MHU (BOM) protocol is used as transport for this. After
the SCP boots using the transferred image, the AP CPU waits till the `READY`
message is received from SCP. This patch separates the API for transport of
image from the wait for `READY` message and also moves the related files to
the `css/drivers` folder. The previous API `scp_bootloader_transfer` is
renamed to `css_scp_boot_image_xfer` to reflect the css naming convention.
This reorganisation also allows easier switch to a different transport
(eg: Shared Data Structure based transfer) in future
Change-Id: I8a96f9c4616ffde6dbfdf7c18f6f6f8bfa40bbf0
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Recent patches to reduce the memory footprint of BL images have
resulted in saving several pages of memory. This patch reduces
the BL2 size limit by 20KB for Juno when ARM_BOARD_OPTIMISE_MEM=1
so that more free space can be freed up for Trusted OS (BL32). Also
SCP_BL2/SCP_BL2U size is now restricted to 80K.
Change-Id: I1573d7a34e24d15e4abce8a14da40dbb5dc81e37
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
The board features the Hi3798C V200 with an integrated quad-core
64-bit ARM Cortex A53 processor and high performance Mali T720 GPU,
making it capable of running any commercial set-top solution based on
Linux or Android. Its high performance specification also supports a
premium user experience with up to H.265 HEVC decoding of 4K video at
60 frames per second.
SOC Hisilicon Hi3798CV200
CPU Quad-core ARM Cortex-A53 64 bit
DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB
USB Two USB 2.0 ports One USB 3.0 ports
CONSOLE USB-micro port for console support
ETHERNET 1 GBe Ethernet
PCIE One PCIe 2.0 interfaces
JTAG 8-Pin JTAG
EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot
DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor
WIFI 802.11AC 2*2 with Bluetooth
CONNECTORS One connector for Smart Card One connector for TSI
The platform boot sequence is as follows:
l-loader --> arm_trusted_firmware --> u-boot
Repositories:
- https://github.com/Linaro/poplar-l-loader.git
- https://github.com/Linaro/poplar-u-boot.git
U-Boot is also upstream in the project's master branch.
Make sure you are using the correct branch on each one of these
repositories. The definition of "correct" might change over time (at
this moment in time this would be the "latest" branch).
Build Line:
make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1
PLAT=poplar BL33=/path/to/u-boot.bin
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Alex Elder <elder@linaro.org>
This fix modifies the order of system includes to meet the ARM TF coding
standard. There are some exceptions to this change in order to retain
header groupings and where there are headers within #if statements.
Change-Id: Ib5b668c992d817cc860e97b29e16ef106d17e404
Signed-off-by: Isla Mitchell <isla.mitchell@arm.com>
This fix modifies the order of #includes in ARM standard platforms
to meet the ARM TF coding standard.
Change-Id: Ide19aad6233babda4eea2d17d49e523645fed1b2
Signed-off-by: Isla Mitchell <isla.mitchell@arm.com>
PLATFORM_LINKER_FORMAT
and
PLATFORM_LINKER_ARCH
defines are removed from
plat/hisilicon/hikey/include/platform_def.h
since there are already defined in
include/plat/common/common_def.h
which is included by
plat/hisilicon/hikey/hikey_def.h
which is included by
plat/hisilicon/hikey/include/platform_def.h
The line
$(eval $(call FIP_ADD_IMG,SCP_BL2,--scp-fw))
is removed from
plat/hisilicon/hikey/platform.mk
to clear the warning below:
Makefile:544: warning: overriding commands for target `check_SCP_BL2'
plat/hisilicon/hikey/platform.mk:19: warning: ignoring old commands for target `check_SCP_BL2'
$(eval $(call FIP_ADD_IMG,SCP_BL2,--scp-fw))
already exists in
Makefile
and applies to plat hikey so is redundant in
plat/hisilicon/hikey/platform.mk
Signed-off-by: Victor Chong <victor.chong@linaro.org>
The line
$(eval $(call FIP_ADD_IMG,SCP_BL2,--scp-fw))
is removed from
plat/hisilicon/hikey960/platform.mk
to clear the warning below:
Makefile:544: warning: overriding commands for target `check_SCP_BL2'
plat/hisilicon/hikey960/platform.mk:13: warning: ignoring old commands for
target `check_SCP_BL2'
$(eval $(call FIP_ADD_IMG,SCP_BL2,--scp-fw))
already exists in
Makefile
and applies to plat hikey960 so is redundant in
plat/hisilicon/hikey960/platform.mk
Signed-off-by: Victor Chong <victor.chong@linaro.org>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Decrypt device private keys which transfer from kernel, then stuff it to
DP controller. So that DP driver could start HDCP authentication in
kernel.
Change-Id: If3c2cd99bca811fe5fc30acc88bf5dc1afd7416d
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
This patch fixes the two things as follows:
1) rk3399_flash_l2_b" seems to be a typo. That's "flush", not "flash".
2) fixes the warnings log.
We always hit the warnings thing during the suspend, as below log:
..
[ 51.022334] CPU5: shutdown
[ 51.025069] psci: CPU5 killed.
INFO: sdram_params->ddr_freq = 928000000
WARNING: rk3399_flash_l2_b:reg 28830380,wait
When the L2 completes the clean and invalidate sequence, it asserts the
L2FLUSHDONE signal. The SoC can now deassert L2FLUSHREQ signal and then
the L2 deasserts L2FLUSHDONE.
Then, a loop without a delay isn't really great to measure time. We should
probably add a udelay(10) or so in there and then maybe replace the WARN()
after the loop. In the actual tests, the L2 cache will take ~4ms by
default for big cluster.
In the real world that give 10ms for the enough margin, like the
ddr/cpu/cci frequency and other factors that will affect it.
Change-Id: I55788c897be232bf72e8c7b0e10cf9b06f7aa50d
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
This patch implements the platform APIs plat_get_rotpk_info,
plat_get_nv_ctr, plat_set_nv_ctr to invoke CryptoCell SBROM
APIs when ARM_CRYPTOCELL_INT is set.
Change-Id: I693556b3c7f42eceddd527abbe6111e499f55c45
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
This patch makes the necessary changes to enable ARM platform to
successfully integrate CryptoCell during Trusted Board Boot. The
changes are as follows:
* A new build option `ARM_CRYPTOCELL_INTEG` is introduced to select
the CryptoCell crypto driver for Trusted Board boot.
* The TrustZone filter settings for Non Secure DRAM is modified
to allow CryptoCell to read this memory. This is required to
authenticate BL33 which is loaded into the Non Secure DDR.
* The CSS platforms are modified to use coherent stacks in BL1 and BL2
when CryptoCell crypto is selected. This is because CryptoCell makes
use of DMA to transfer data and the CryptoCell SBROM library allocates
buffers on the stack during signature/hash verification.
Change-Id: I1e6f6dcd1899784f1edeabfa2a9f279bbfb90e31
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
For rk3399, the L2ACTLR[14] is 0 by default, as ACE CCI-500 doesn't
support WriteEvict. and you will hit the condition L2ACTLR[3] with 0,
as the Evict transactions should propagate to CCI-500 since it has
snoop filters.
Maybe this erratum applies to all Cortex-A53 cores so far, especially
if RK3399's A53 is a r0p4. we should enable it to avoid data corruption,
Change-Id: Ib86933f1fc84f8919c8e43dac41af60fd0c3ce2f
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
A recent commit 030567e6f5 added U()/ULL()
macro to TF constants. This has caused some signed-unsigned comparison
warnings / errors in the TF static analysis.
This patch addresses these issues by migrating impacted variables from
signed ints to unsigned ints and vice verse where applicable.
Change-Id: I4b4c739a3fa64aaf13b69ad1702c66ec79247e53
Signed-off-by: David Cunado <david.cunado@arm.com>
On Juno AArch32, the L2 cache may contain garbage after the warm reset
from AArch64 to AArch32. This is all fine until the MMU is configured
and the data caches enabled. To avoid fetching stale data from the L2
unified cache, invalidate it before the warm reset to AArch32 state.
Change-Id: I7d27e810692c02c3e83c9f31de67f6bae59a960a
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
Before BL2 loads the SCP ram firmware, `SCP_BOOT_CFG_ADDR` specifies
the primary core. After the SCP ram firmware has started executing,
`SCP_BOOT_CFG_ADDR` is modified. This is not normally an issue but
the Juno AArch32 boot flow is a special case. BL1 does a warm reset
into AArch32 and the core jumps to the `sp_min` entrypoint. This is
effectively a `RESET_TO_SP_MIN` configuration. `sp_min` has to be
able to determine the primary core and hence we need to restore
`SCP_BOOT_CFG_ADDR` to the cold boot value before `sp_min` runs.
This magically worked when booting on A53 because the core index was
zero and it just so happened to match with the new value in
`SCP_BOOT_CFG_ADDR`.
Change-Id: I105425c680cf6238948625c1d1017b01d3517c01
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
For some reason, HDCP key decrytion can't open source in ATF, so we
build it as hdcp.bin. Besides declare the handler for decrypting.
Change-Id: Ia67ff2442ab43cb3ee4875b3d59cc1608e854b4b
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Use TF_CFLAGS instead of CFLAGS, to allow CFLAGS to be overriden from
the make command line.
Change-Id: I3e5726c04bcd0176f232581b8be2c94413374ac7
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
These errata are only applicable to AArch64 state. See the errata notice
for more details:
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.epm048406/index.html
Introduce the build options ERRATA_A53_835769 and ERRATA_A53_843419.
Enable both of them for Juno.
Apply the 835769 workaround as following:
* Compile with -mfix-cortex-a53-835769
* Link with --fix-cortex-a53-835769
Apply the 843419 workaround as following:
* Link with --fix-cortex-a53-843419
The erratum 843419 workaround can lead the linker to create new sections
suffixed with "*.stub*" and 4KB aligned. The erratum 835769 can lead the
linker to create new "*.stub" sections with no particular alignment.
Also add support for LDFLAGS_aarch32 and LDFLAGS_aarch64 in Makefile for
architecture-specific linker options.
Change-Id: Iab3337e338b7a0a16b0d102404d9db98c154f8f8
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
SPE is only supported in non-secure state. Accesses to SPE specific
registers from SEL1 will trap to EL3. During a world switch, before
`TTBR` is modified the SPE profiling buffers are drained. This is to
avoid a potential invalid memory access in SEL1.
SPE is architecturally specified only for AArch64.
Change-Id: I04a96427d9f9d586c331913d815fdc726855f6b0
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
Currently, ROTPK_NOT_DEPLOYED flag is set in plat_get_rotpk_info().
It is up to users how to retrieve ROTPK if the ROT verification is
desired. This is not nice.
This commit improves plat_get_rotpk_info() implementation and automates
the ROTPK deployment. UniPhier platform has no ROTPK storage, so it
should be embedded in BL1/BL2, like ARM_ROTPK_LOCATION=devel_rsa case.
This makes sense because UniPhier platform implements its internal ROM
i.e. BL1 is used as updatable pseudo ROM.
Things work like this:
- ROT_KEY (default: $(BUILD_PLAT)/rot_key.pem) is created if missing.
Users can override ROT_KEY from the command line if they want to
use a specific ROT key.
- ROTPK_HASH is generated based on ROT_KEY.
- ROTPK_HASH is included by uniphier_rotpk.S and compiled into BL1/BL2.
- ROT_KEY is input to cert_create tool.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
On ARM platforms before exiting from SP_MIN ensure that
the default console is switched to the runtime serial port.
Change-Id: I0ca0d42cc47e345d56179eac16aa3d6712767c9b
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
With GCC 6.2 compiler, more C undefined behaviour is being flagged as
warnings, which result in build errors in ARM TF build.
This patch addresses issue caused by enums with values that exceed
maximum value for an int. For these cases the enum is converted to
a set of defines.
Change-Id: I5114164be10d86d5beef3ea1ed9be5863855144d
Signed-off-by: David Cunado <david.cunado@arm.com>
The patch fb7d32e588 migrated the CPU
libraries to have unique defines, prefixing them with the CPU name.
This patch migrates the hikey960 platform port to use the A53 specific
defines.
Change-Id: Id76f544b0b236bbd4974ab5ffa1203f073c20021
Signed-off-by: David Cunado <david.cunado@arm.com>
In CPU off callback function, the old code uses the function
hisi_test_pwrdn_allcores() to check if all CPUs in cluster have been
powered off and if it's valid then power off the whole cluster. But the
function hisi_test_pwrdn_allcores() only maintains the different power
states only for CPU suspend/resume flow, so it cannot return correct
states for CPU on/off flow.
This patch is to change use hisi_test_cpu_down() to check if all CPUs
have been powered off, so that can power off the whole cluster properly
when all CPUs in cluster have been hotplugged off.
Signed-off-by: Tao Wang <kevin.wangtao@hisilicon.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
The ARM_PLAT_MT bit enables the support for MT bit in
MPIDR format. This means that the level 0 affinity
represents the thread and CPU / Cluster levels are
at affinity level 1 and 2 respectively.
This was not catered for in the scpi 'css_scp_get_power_state, API.
Since the SCPI driver can only cater for single threaded CPUs,
this patch fixes the problem by catering for this shift by
effectively ignoring the Thread (level 0) affinity level.
Change-Id: If44f55c9fb2773c8d3f8a9bbcf5420a6f7409dfe
Signed-off-by: jagadeesh ujja <jagadeesh.ujja@arm.com>
Main fixes:
* Added explicit casts (e.g. 0U) to integers in order for them to be
compatible with whatever operation they're used in [Rule 10.1]
* Force operands of an operator to the same type category [Rule 10.4]
* Added curly braces ({}) around if/while statements in order to
make them compound [Rule 15.6]
* Added parentheses [Rule 12.1]
* Voided non C-library functions whose return types are not used [Rule 17.7]
Change-Id: I91404edec2e2194b1ce2672d2a3fc6a1f5bf41f1
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Main fixes:
* Include header file for function declarations [Rule 8.4]
* Move global object into function [Rule 8.9]
Change-Id: I1bc9f3f0ebd4ffc0b8444ac856cd97b0cb56bda4
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Main fixes:
* Use int32_t replace int, use uint32_t replace unsign int [Rule 4.6]
* Added explicit casts (e.g. 0U) to integers in order for them to be
compatible with whatever operation they're used in [Rule 10.1]
* Force operands of an operator to the same type category [Rule 10.4]
* Fixed assert/if statements conditions to be essentially boolean [Rule 14.4]
* Added curly braces ({}) around if statements in order to
make them compound [Rule 15.6]
* Convert macros form headers to unsigned ints
Change-Id: I8051cc16499cece2039c9751bd347645f40f0901
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Main fixes:
* Added explicit casts (e.g. 0U) to integers in order for them to be
compatible with whatever operation they're used in [Rule 10.1]
* Convert object type to match the type of function parameters
[Rule 10.3]
* Added curly braces ({}) around if statements in order to
make them compound [Rule 15.6]
* Expressions resulting from the expansion of macro parameters
shall be enclosed in parentheses[Rule 20.7]
Change-Id: I5cf83caafcc1650b545ca731bf3eb8f0bfeb362b
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Main fixes:
* Fixed if/while statement conditional to be essentially boolean [Rule 14.4]
* Added curly braces ({}) around if/for/while statements in order to
make them compound [Rule 15.6]
* Added explicit casts (e.g. 0U) to integers in order for them to be
compatible with whatever operation they're used in [Rule 10.1]
Change-Id: Ic72b248aeede6cf18bf85051188ea7b8fd8ae829
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
This patch moves the GPU reset state check, during VideoMem resize, to the
common SiP handler, to reduce code duplication.
Change-Id: I3818c5f104b809da83dc2a61d6a8149606f81c13
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the logic to check if the command written to the
MC_CLIENT_HOTRESET_CTRLx registers, was accepted by the hardware module.
Change-Id: If94fff9424555cb4688042eda17b4b20f4eb399a
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds explicit casts (U(x)) to integers in the tegra_def.h
headers, to make them compatible with whatever operation they're used
in [MISRA-C Rule 10.1]
Change-Id: Ic5fc611aad986a2c6e6e6f625e0753ab9b69eb02
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch makes all the defines in the CPU libraries unique,
by prefixing them with the CPU name.
NOTE: PLATFORMS USING THESE MACROS WILL HAVE TO UPDATE THEIR CODE
TO START USING THE UPDATED NAMES
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables the 'sign-compare' flag, to enable warning/errors
for comparisons between signed/unsigned variables. The warning has
been enabled for all the Tegra platforms, to start with.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Since the type of ADC value is always unsigned int, don't
need to check the value with negative value.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Initial commit for Socionext UniPhier SoC support. BL1, Bl2, and
BL31 are supported. Refer to docs/plat/socionext-uniphier.md for
more detais.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The 'impl' variable is guarded by the symbol DEBUG, but used in an INFO
level print statement. INFO is defined based on LOG_LEVEL. Hence, builds
would fail when
- DEBUG=0 && LOG_LEVEL>=LOG_LEVEL_INFO with a variable used but not defined
- DEBUG=1 && LOG_LEVEL<LOG_LEVEL_INFO with a variable defined but not used
Fixing this by guarding impl with the same condition that guards INFO.
FixesARM-software/tf-issues#490
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
unlike rk3399 and rk3368, there are some rockchip 64bit SOC
do not have CPUPD, and pmu_cpuson_entrypoint() is common
function for rockchip platform, so we need to check wakeup
cpu when resume.
Change-Id: I6313e8a9d7c16b03e033414f0cb281646c2159ff
Signed-off-by: Lin Huang <hl@rock-chips.com>
with PMU_PERILP_PD_EN bit enable, the soc will shutdown
cm0, crypto, dcf, imem(normal SRAM), dmac, bootrom, efuse_con,
spi, i2c, uart, saradc, tsadc when suspend, we have M0 code
need to run when suspend in normal SRAM, so we need to take
care of that.
Change-Id: I8c066637e5b81d4b1d53197450b9d592cbe00793
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
This moves the DRAM restore code to PMUSRAM. This is so that the
voltage domain that contains the SRAM that it was stored in before may
be turned off during system suspend.
Change-Id: Id761181a30caadd12f1ce061d1034f3159a76d28
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
This converts two functions to use for-loops. This saves a bit of
space to help moving DRAM resume code to PMUSRAM.
Change-Id: Ie6ca490cf50c2ec83335cf1845b337c3e8a47496
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
The removed if statement would make the same check that the for loop
it is in does to break out of the for loop, so it doesn't make any
sense to keep it there.
Change-Id: I819c29f9182e6de1fc47e418aed15ad38e8f9fa9
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
This removes the mmio_... function calls to set the multicast bit for
the PHY registers when overriding the write leveling values. These are
not needed since multicast is set by default when calling the
function, and it's also better not to leave the side effect of
disabling multicast when exiting the function.
Change-Id: I83e089a2a2d55268b3832f36724c3b2c4be81082
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
This removes the phy_dll_bypass_set function as it is unneeded. The
values that function sets are saved during suspend, so the proper
values will be restored on resume.
Change-Id: I17542206c56e639ce8cb6375233145167441d4e2
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
This removes the space allocation for the unused PHY register space.
For instance in PHY registers 0-127, only 0-90 are used, so don't save
the 91-127 registers. This saves about 1.6KB of space.
Change-Id: I0c9f6d9bed8f0c1f3b8b805dfb10cf0c06208919
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
the function pmu_cpuon_entrypoint() need to run in the pmusram,
we just copy bin file to pmusram before, now we add pmusram section
and link pmu_cpuon_entrypoint() to pmusram directly
Change-Id: Iae31e4c01c480c8e6f565a8f588332b478efdb16
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
The differential signal of DQS need keep low level
before gate training. It need enable RPULL and disable
PHY side ODT to ensure it when do gate training.
But it can not access the PHY registers to do it when
perform DFS.So the workaroud as below: It is ensure that
the PHY's read gate is landing somewhere in the incoming
DQS's pulses before it starts searching for pre-amble window.
It need get the rddqs_delay_ps to calculate the start point
of gate training for DFS.
Change-Id: I79eabcf4ec9a9c8f4539f68a51f22afba49c72fe
Signed-off-by: Lin Huang <hl@rock-chips.com>
Support BL31 on HiKey960 platform. Implement PSCI.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
BL2 loads MCU firmware & BL31 on hikey960 platform. The MCU firmware
is used to implement low power feature.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Support BL1 on HiKey960 platform. When recovery mode is detected,
BL1 loads NS BL1U that flushs images into UFS. When normal boot
mode is detected, BL1 loads BL2.
Fix for https://github.com/ARM-software/tf-issues/issues/486
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
This patch adds the memory map region for the SCMI payload memory
and maps the Juno core indices to SCMI power domains via the
`plat_css_core_pos_to_scmi_dmn_id_map` array.
Change-Id: I0d2bb2a719ff5b6a9d8e22e91e1625ab14453665
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
This patch adds the SCMI driver for communicating with SCP. The power
domain management and system power management protocol of the SCMI
specification[1] is implemented in the driver. The SCP power management
abstraction layer for SCMI for CSS power management is also added.
A new buid option `CSS_USE_SCMI_DRIVER` is introduced to select SCMI
driver over SCPI.
[1] ARM System Control and Management Interface v1.0 (SCMI)
Document number: ARM DEN 0056A
Change-Id: I67265615a17e679a2afe810b9b0043711ba09dbb
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
ARM GIC-600 IP complies with ARM GICv3 architecture, but among others,
implements a power control register in the Redistributor frame. This
register must be programmed to mark the frame as powered on, before
accessing other registers in the frame. Rest of initialization sequence
remains the same.
The driver provides APIs for Redistributor power management, and
overrides those in the generic GICv3 driver. The driver data is shared
between generic GICv3 driver and that of GIC-600.
For FVP platform, the GIC-600 driver is chosen when FVP_USE_GIC_DRIVER
is set to FVP_GIC600. Also update user guide.
Change-Id: I321b2360728d69f6d4b0a747b2cfcc3fe5a20d67
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Both Cortex-A75 and Cortex-A55 CPUs use the ARM DynamIQ Shared Unit
(DSU). The power-down and power-up sequences are therefore mostly
managed in hardware, and required software operations are considerably
simpler.
Change-Id: I68b30e6e1ebe7c041d5e67f39c59f08575fc7ecc
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
This patch is to enable CPU suspend/resume and system level's
suspend/resume; also enable system power off state.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
The cluster 0 doesn't rely on PSCI to enable it; so enable CCI port
for cluster 0 in BL31 platform setup flow.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Fix for CPU topology so present the CPU core numbers for two clusters;
Base on this fixing, the PSCI can maintain correct power states.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Support BL31 and PSCI. Enable multiple cores in PSCI.
Change-Id: I66c39e1e9c4c45ac41a0142ed2070d79a3ac5ba3
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Dan Handley <dan.handley@arm.com>
BL2 is used to load BL31 and SCP_BL2. In HiKey platform, SCP_BL2
is the mcu firmware that is used to scale cpu frequency and switch
low power mode.
Change-Id: I1621aa65bea989fd125ee8502fd56ef72362bf97
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Dan Handley <dan.handley@arm.com>
Initialize regulators, pins and eMMC in BL1. Only SRAM could be used in BL1.
So BL2 will be loaded from eMMC into SRAM later.
Change-Id: I8e7ef82ffa29a3c647c9d2d2981e8759ee85d833
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Dan Handley <dan.handley@arm.com>
Since ARM_DRAM2_BASE is above the 32-bit limit, the condition
is always false. Wrap this condition in an ifndef to avoid
warnings during compilation.
Change-Id: Ideabb6c65de6c62474ed03eb29df4b049d5316be
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
This function was removed long ago. Remove remaining
pragma reference.
Change-Id: I66c556863d47dc17d2ffdc6c23aa524df6aade80
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
The default case is impossible to hit as the `power_level`
is already checked earlier. Avoids a clang warning.
Change-Id: I707463c843adc748ee9aa1d2313f9ab7dab3a8ab
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
This options enables an implementation of SHA-256 that has a smaller
code footprint (~1.6 KB less) but is also ~30% slower. For ARM
platforms, code size is currently considered more important than
execution speed in the mbed TLS crypto module.
Added a small note about this option to the documentation of the
authentication framework.
Change-Id: I4c0b221ea5d3466465261316ba07b627fa01b233
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The header tbbr_oid.h contains OIDs obtained by ARM Ltd.
so there is no good reason to use platform_oid.h
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Platforms aligned with TBBR are supposed to use their own OIDs, but
defining the same macros with different OIDs does not provide any
value (at least technically).
For easier use of TBBR, this commit allows platforms to reuse the OIDs
obtained by ARM Ltd. This will be useful for non-ARM vendors that
do not need their own extension fields in their certificate files.
The OIDs of ARM Ltd. have been moved to include/tools_share/tbbr_oid.h
Platforms can include <tbbr_oid.h> instead of <platform_oid.h> by
defining USE_TBBR_DEFS as 1. USE_TBBR_DEFS is 0 by default to keep the
backward compatibility.
For clarification, I inserted a blank line between headers from the
include/ directory (#include <...>) and ones from a local directory
(#include "..." ).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The commit abd2aba99e introduced a
regression to the AArch32 sp_min Juno build. This patch fixes that.
Change-Id: I4b141717684d6aee60c761ea17f23170aa6708c3
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Add support for firmware upgrade on AArch32.
This patch has been tested on the FVP models.
NOTE: Firmware upgrade on Juno AArch32 is not currently supported.
Change-Id: I1ca8078214eaf86b46463edd14740120af930aec
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
Co-Authored-By: Yatharth Kochar <yatharth.kochar@arm.com>
This patch adds `TRUSTED_BOARD_BOOT` support for AArch32 mode.
To build this patch the "mbedtls/include/mbedtls/bignum.h"
needs to be modified to remove `#define MBEDTLS_HAVE_UDBL`
when `MBEDTLS_HAVE_INT32` is defined. This is a workaround
for "https://github.com/ARMmbed/mbedtls/issues/708"
NOTE: TBBR support on Juno AArch32 is not currently supported.
Change-Id: I86d80e30b9139adc4d9663f112801ece42deafcf
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
Co-Authored-By: Yatharth Kochar <yatharth.kochar@arm.com>
A previous patch superseded the MBEDTLS_KEY_ALG. This patch updates
the ARM platforms to use the new TF_MBEDTLS_KEY_ALG define.
Change-Id: Ie0e1bc272e127e879ac58e7cfcbe268751d7688e
Signed-off-by: David Cunado <david.cunado@arm.com>
For SoCs T132 and T210, the header file 'platform_def.h' used to include
'tegra_def.h' and vice versa. This patch breaks this circular dependency
by making 'tegra_def.h' independent.
Change-Id: I45a00a84e6ab8b93d5e9242a9ff65f03e9102a96
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
We used to have the following circular dependency in the FVP platform
header files:
+-> arm_def.h ---> platform_def.h ---> fvp_def.h --+
|__________________________________________________|
This patch breaks it by not including 'arm_def.h' from 'fvp_def.h'.
Change-Id: I280d906559e3343dd38764029e77c0ea768b4fec
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
A new file added as part of arm-trusted-firmware#927 was missing the
SPDX license identifier - this patch adds the missing identifier.
Change-Id: Id1355f2bdca930b7e65bb54eff7e6c764ebb0d96
Signed-off-by: David Cunado <david.cunado@arm.com>
This reverts commit b6dcbf588a.
This function wasn't used when it was removed, but it is needed to
compile the new changes proposed for Rockchip platforms.
Change-Id: Ia5bfe1f8398e08431f96923e2f059a83e5cb78d4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
In AArch64, privileged exception levels control the execution state
(a.k.a. register width) of the immediate lower Exception Level; i.e.
whether the lower exception level executes in AArch64 or AArch32 state.
For an exception level to have its execution state changed at run time,
it must request the change by raising a synchronous exception to the
higher exception level.
This patch implements and adds such a provision to the ARM SiP service,
by which an immediate lower exception level can request to switch its
execution state. The execution state is switched if the request is:
- raised from non-secure world;
- raised on the primary CPU, before any secondaries are brought online
with CPU_ON PSCI call;
- raised from an exception level immediately below EL3: EL2, if
implemented; otherwise NS EL1.
If successful, the SMC doesn't return to the caller, but to the entry
point supplied with the call. Otherwise, the caller will observe the SMC
returning with STATE_SW_E_DENIED code. If ARM Trusted Firmware is built
for AArch32, the feature is not supported, and the call will always
fail.
For the ARM SiP service:
- Add SMC function IDs for both AArch32 and AArch64;
- Increment the SiP service minor version to 2;
- Adjust the number of supported SiP service calls.
Add documentation for ARM SiP service.
FixesARM-software/tf-issues#436
Change-Id: I4347f2d6232e69fbfbe333b340fcd0caed0a4cea
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.
NOTE: Files that have been imported by FreeBSD have not been modified.
[0]: https://spdx.org/
Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
Replace all instances of checks with the new macro.
Change-Id: I0eec39b9376475a1a9707a3115de9d36f88f8a2a
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
This patch implements the handler to calculate the cluster and
system power states for the Tegra210 SoC. The power states
returned by this handler are used by the PSCI library to decide
cache maintenance operations - cluster v cpu.
Change-Id: I93e4139d4cd8a086b51f328e9a76e91428ebcdab
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the logic used to calculate the end of NS memory
aperture. The functions allows zero sized NS apertures as that is
a valid requirement for some use cases. e.g. VPR resize.
Change-Id: Ie966e0ea2f9c6888d21c38e734003704094b3720
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The video memory carveout has to be re-sized depending on the Video
content. This requires the NS world to send us new base/size values.
Before setting up the new region, we must zero out the previous memory
region, so that the video frames are not leaked to the outside world.
This patch adds the logic to zero out the previous memory carveout
region.
Change-Id: I471167ef7747154440df5c1a5e015fbeb69d9043
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Earlier, we were setting "System Suspend" as the power state for all system
states. This caused incorrect system state during a cluster power down.
This patch fixes this anomaly and sets the correct power state during a
cluster/system power down.
Change-Id: Ibd002930e0ae103e381e0a19670c3c4d057e7cb7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds max retries for all ARI requests and asserts
if the ARI request is still busy.
Change-Id: I454ad9b557bb59e513e4c0c6f071275c87d0e07a
Signed-off-by: Steven Kao <skao@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds the Tegra micro-seconds controller to the
memory map. This allows us to use the delay_timer functionality.
Change-Id: Ia8b148a871949bfede539974cacbe0e93ec7e77c
Signed-off-by: Steven Kao <skao@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch moves the platform delay timer init to early BL31
platform setup, so that platforms can use the udelay/mdelay
routines in the early init code.
Change-Id: I6fe20b76176ea22589539c180c5b6f9d09eda8de
Signed-off-by: Steven Kao <skao@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
utils.h is included in various header files for the defines in it.
Some of the other header files only contain defines. This allows the
header files to be shared between host and target builds for shared defines.
Recently types.h has been included in utils.h as well as some function
prototypes.
Because of the inclusion of types.h conflicts exist building host tools
abd these header files now. To solve this problem,
move the defines to utils_def.h and have this included by utils.h and
change header files to only include utils_def.h and not pick up the new
types.h being introduced.
FixesARM-software/tf-issues#461
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Remove utils_def.h from utils.h
This patch removes utils_def.h from utils.h as it is not required.
And also makes a minor change to ensure Juno platform compiles.
Change-Id: I10cf1fb51e44a8fa6dcec02980354eb9ecc9fa29
One assert depends on code that is conditionally compiled based on the
DEBUG define. This patch modifies the conditional inclusion of such code
so that it is based on the ENABLE_ASSERTIONS build option.
Change-Id: Ic5659a3db8632593b9d2e83dac6d30afd87c131d
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables the assert in the context save routine
by default, for all flavours of the build.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch changes the platform Makefile to set `ENABLE_ASSERTIONS` to
1 instead of the deprecated option `ASM_ASSERTION`. This also pulls in
C assertions in release mode.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
rk3328 is a Quad-core soc and Cortex-a53 inside!
This patch supports the following functions:
1、power up/off cpus
2、suspend/resume cpus
3、suspend/resume system
4、reset system
5、power off system
Change-Id: I60687058d13912c6929293b06fed9c6bc72bdc84
Signed-off-by: tony.xie <tony.xie@rock-chips.com>
The CSS power management layer previously allowed to suspend system
power domain level via both PSCI CPU_SUSPEND and PSCI SYSTEM_SUSPEND
APIs. System suspend via PSCI CPU_SUSPEND was always problematic to
support because of issues with targeting wakeup interrupts to
suspended cores before the per-cpu GIC initialization is done. This
is not the case for PSCI SYSTEM_SUSPEND API because all the other
cores are expected to be offlined prior to issuing system suspend and
PSCI CPU_ON explicit calls will be made to power them on. Hence the Juno
platform used to downgrade the PSCI CPU_SUSPEND request for system
power domain level to cluster level by overriding the default
`plat_psci_pm_ops` exported by CSS layer.
Given the direction the new CSS platforms are evolving, it is best to
limit the system suspend only via PSCI SYSTEM_SUSPEND API for all
CSS platforms. This patch makes changes to allow system suspend
only via PSCI SYSTEM_SUSPEND API. The override of `plat_psci_ops`
for Juno is removed.
Change-Id: Idb30eaad04890dd46074e9e888caeedc50a4b533
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
This patch sanity checks the SMMU context created by the platform
code. The first entry contains the size of the array; which the
driver now verifies before moving on with the save.
This patch also fixes an error in the calculation of the size of
the context that gets copied to TZDRAM.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support for SP_MIN on JUNO platform.
The changes include addition of AArch32 assembly files,
JUNO specific SP_MIN make file and miscellaneous changes
in ARM platform files to enable support for SP_MIN.
Change-Id: Id1303f422fc9b98b9362c757b1a4225a16fffc0b
Signed-off-by: Yatharth Kochar <yatharth.kochar@arm.com>
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
Following steps are required to boot JUNO in AArch32 state:
1> BL1, in AArch64 state, loads BL2.
2> BL2, in AArch64 state, initializes DDR.
Loads SP_MIN & BL33 (AArch32 executable)images.
Calls RUN_IMAGE SMC to go back to BL1.
3> BL1 writes AArch32 executable opcodes, to load and branch
at the entrypoint address of SP_MIN, at HI-VECTOR address and
then request for warm reset in AArch32 state using RMR_EL3.
This patch makes following changes to facilitate above steps:
* Added assembly function to carry out step 3 above.
* Added region in TZC that enables Secure access to the
HI-VECTOR(0xFFFF0000) address space.
* AArch32 image descriptor is used, in BL2, to load
SP_MIN and BL33 AArch32 executable images.
A new flag `JUNO_AARCH32_EL3_RUNTIME` is introduced that
controls above changes. By default this flag is disabled.
NOTE: BL1 and BL2 are not supported in AArch32 state for JUNO.
Change-Id: I091d56a0e6d36663e6d9d2bb53c92c672195d1ec
Signed-off-by: Yatharth Kochar <yatharth.kochar@arm.com>
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
If there is a pending interrupt, it is possible for the AP to come out
of the final WFI before SCP has a chance to act on it. Prevent this
by disabling the GIC CPU interface before issuing a WFI.
Previously, SCP would not wait on WFI before taking an action but
would shut down the core or system regardless.
Change-Id: Ib0bcf69a515d540ed4f73c11e40ec7c863e39c92
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
The build option `ENABLE_ASSERTIONS` should be used instead. That way
both C and ASM assertions can be enabled or disabled together.
All occurrences of `ASM_ASSERTION` in common code and ARM platforms have
been replaced by `ENABLE_ASSERTIONS`.
ASM_ASSERTION has been removed from the user guide.
Change-Id: I51f1991f11b9b7ff83e787c9a3270c274748ec6f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This patch fixes the size used to save the context, when the
device enters System Suspend.
Reported by: David Cunado
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
ARM platforms have migrated to the translation tables library v2.
However, for testing purposes, it can be useful to temporarily switch
back to the old version.
This patch introduces the option `ARM_XLAT_TABLES_LIB_V1`, that switches
to v1 of the library when is set to 1. By default, it is 0, so that ARM
platforms use the new version unless specifically stated.
Updated User Guide.
Change-Id: I53d3c8dd97706f6af9c6fca0364a88ef341efd31
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
On Tegra systems, there are multiple software components that
require to interact with MCE. The components can either be 32-bit
or 64-bit payloads. This patch supports MCE SMC functions ID for
AARCH32 and AARCH64 architectures to support such clients.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Not having U or ULL as a suffix for these enums causes
a lot of unnecessary MISRA issues. This patch adds U or
ULL suffix to these common enums to reduce number of
MISRA issues.
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch stops initialising the same UART console, as a "crash"
console. The normal and the crash consoles use the same UART port
and hence the crash console init function now only checks if the
console is ready to be used.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support for fake system suspend (SC7).
This is a debug mode, to ensure that a different code path is
executed for cases like pre-silicon development, where a
full-fledged SC7 is not possible in early stages.
This particular patch ensures that, if fake system suspend is
enabled (denoted by tegra_fake_system_suspend variable
having a non-zero value), instead of calling WFI, a request
for a warm reset is made for starting the SC7 exit procedure.
This ensures that the code path of kernel->ATF and back to
kernel is executed without depending on other components
involved in SC7 code path.
Additionally, this patch also adds support for SMC call
from kernel, enabling fake system suspend mode.
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
During boot, USB3 and flash media (SDMMC/SATA) devices need access to
IRAM. Because these clients connect to the MC and do not have a direct
path to the IRAM, the MC implements AHB redirection during boot to allow
path to IRAM. In this mode, accesses to a programmed memory address aperture
are directed to the AHB bus, allowing access to the IRAM. The AHB aperture
is defined by the IRAM_BASE_LO and IRAM_BASE_HI registers, which are
initialized to disable this aperture. Once bootup is complete, we must
program IRAM base/top, thus disabling access to IRAM.
This patch provides functionality to disable this access. The tegra port
calls this new function before jumping to the non-secure world during
cold boot.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
GCC version 4.8 (and presumably earlier) warn when non-standard types are
used for bitfield definitions when -pedantic is enabled. This prevents TF
from being built with such toolchains, since -Werror -pedantic options are
used.
gcc-4.9 removed this warning; -pedantic is intended to cause gcc to emit a
warning in all cases required by the standard, but the standard does not
require a warning in this case.
See: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=57773
Signed-off-by: Stephen Warren <swarren@nvidia.com>
This patch adds flexibility to the code to initialise multiple SMMU
devices. The base address macro name has been changed to make it
explicit that we support multiple SMMUs.
Change-Id: Id4854fb010ebeb699512d79c769de24050c2ad69
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Krishna Reddy <vdumpa@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch empowers the platforms to provide an array with the
registers that must be saved/restored across System Suspend.
Original-change-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables the 'xlat_table_v2' library for the Tegra Memory
Controller driver. This library allows us to dynamically map/unmap
memory regions, with MMU enabled.
The Memory Controller driver maps/unmaps non-overlapping Video Memory
region, to clean it of any secure contents, before it resizes the
region.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch makes the default implementation of plat_core_pos_by_mpidr()
as weakly linked, so that platforms can override it with their own.
Tegra186, for one, does not have CPU IDs 2 and 3, so it has its own
implementation of plat_core_pos_by_mpidr().
Change-Id: I7a5319869c01ede3775386cb95af1431792f74b3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch empowers the platforms to provide the settings (e.g. stream ID,
security setting, transaction overrides) required by the Memory Controller
driver. This allows the platforms to program the Memory Controller as per
their needs and makes the driver scalable.
Original-change-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This ARI call enables the EDBGREQ feature in the CCPLEX,
which will cause the CPUs to enter debug state instead of
vectoring to sw (ie MCA handler) upon receiving an async
abort signal.
Change-Id: Ifcb0e11446b6ac55179e3350d8f02b60ba32c94d
Signed-off-by: Rich Wiley <rwiley@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch updates the ARI header file to v3.1.
Change-Id: I3e58cf50d27fb6e72062bb9d9782b75296b32025
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the variable width to store the TZDRAM base
address used to resume from System Suspend.
Change-Id: Ib67eda64b09f26fb2f427f0d624f057081473132
Signed-off-by: Steven Kao <skao@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds a config to the memory controller driver to enable SMMU
device init during boot. Tegra186 platforms keeps it enabled by default,
but future platforms might not support it.
Change-Id: Iebe1c60a25fc1cfb4c97a507e121d6685a49cb83
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds a new SMC function ID to read the refclk and coreclk
clock counter values from the Activity Monitor. The non-secure world
requires this information to calculate the CPU's frequency.
Formula: "freq = (delta_coreclk / delta_refclk) * refclk_freq"
The following CPU registers have to be set by the non-secure driver
before issuing the SMC:
X1 = MPIDR of the target core
X2 = MIDR of the target core
Change-Id: I296d835def1f5788c17640c0c456b8f8f0e90824
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds a new config to enable MC settings for the AFIW
and AFIR devices. Platforms must enable this config on their own.
Change-Id: I53b450117e4764ea76d9347ee2928f9be178b107
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch moves the smmu driver introduced by the Tegra186 port
to tegra/common so that future chips can (re)use it.
Change-Id: Ia44c7f2a62fb2d8869db3a44742a8c6b13c49036
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch splits the MCE driver into public and private interfaces
to allow usage of common functionality across multiple SoCs.
Change-Id: Ib58080e730d72f11ff79507d8e0acffb2ad5c606
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The printf() isn't used by the firmware itself, just by the tools under
the ./tools/ folder. Then tf_printf will unconditionally print.
Remove the unused print_dram_status_info() function.
Change-Id: Ie699ccb54a5be9a2cbbd7b8d4193b57075a2f57a
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Zynqmp implements a version of the Cortex A53 affected by errata 855873.
Enable the workaround for the errata and silence the warning: "WARNING:
BL31: cortex_a53: errata workaround for 855873 was missing!".
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
This patch moves the TSA block's macros from memctrl_v2.h to
tegra_def.h in the Tegra186 tree.
Change-Id: I8b45dd3905c5d1f33ffb36d8b2de72aeb06674aa
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch moves the chip specific memory controller driver defines to
the appropriate tegra_def.h files, for future compatibility.
Change-Id: I3179fb771d8b32e913ca29bd94af95f4b2fc1961
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch moves the MCE's configurable parameters to tegra_def.h for
the Tegra186 SoC, to allow forward compatiblity.
Change-Id: If8660c1c09908a4064dbb67d5ca4fb78389cab13
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Remove stream ID overrides for AON. AON drives its own stream ID when
accesing IOVA memory. However, it needs to use a physical stream ID when
accesing GSC memory. Overriding stream ids prevents AON from accessing
GSC memory, so remove them to allow AON to access GSCs.
Change-Id: Ia2b11014d9780c4546b5e781621ae4cd413735cc
Signed-off-by: Mustafa Yigit Bilgen <mbilgen@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch reverts the APE overrides added for chip verification.
Change-Id: Ib85560934d63f6e41e95ef6898a341f24761a517
Signed-off-by: Vivek Aseeja <vaseeja@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch updates wake time of the cpu to use the MSBs and zero
out the LSB's. Only 24 out of 32 bits are currently passed
through the PSCI interface. Previously all the LSB's were used.
Change-Id: Ie2d9d1bf6e3003dd47526a124f64e6ad555d2371
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The TEGRA_ARI_COPY_MISCREG_AA64_RST ARI should be called with
request_lo/hi set to zero. MTS automatically takes the reset
vector from MISCREG_AA64_RST register and does not need it to
be passed as parameters. This patch updates the API and the
caller function accordingly.
Change-Id: Ie3e3402d93951102239d988ca9f0cdf94f290d2f
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
When entering C7, ATF disables caches and flushes the L1 cache. However,
wake_time[cpu] can still remain in the L2 cache, causing later reads to it
to fetch from DRAM. This will read stale values.
Fix this by aligning wake_time[cpu] to cache lines, and explicitly cleaning it
before disabling caches.
Change-Id: Id73d095b479677595a6b3dd0abb240a1fef5f311
Signed-off-by: Mustafa Yigit Bilgen <mbilgen@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch updates the ARI header to version 3.0
Change-Id: I7cfe0c61c80a6b78625232135dd63393602d32fe
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The TZRAM memory loses its state during "System Suspend". This patch
check if TZRAM base address contains valid data, to decide if the system
is exiting from "System Suspend". To enable TZDRAM encryption, the Memory
Controller's TZDRAM base/size registers would be populated by the BPMP
when the system "wakes up".
Change-Id: I5fc8ba1ae3bce12f0ece493f6f9f5f4d92a46344
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This change adds function to invoke for MISC_CCPLEX ARI calls and
the corresponding smc handler. This can be used to enable/disable
Coresight clock gating.
Change-Id: I4bc17aa478a46c29bfe17fd74f839a383ee2b644
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the incorrect return value that was being passed
back for the ENUM_FEATURES ARI call.
Change-Id: I3842c6ce27ea24698608830cf4c12cfa7ff64421
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch clears the unused or reserved ARI input registers
before issuing the actual ARI command.
Change-Id: I454b86566bfe088049a5c63527c1323d7b25248a
Signed-off-by: Krishna Sitaraman <ksitaraman@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
If SCP_BL2 is passed in from the command line, it is recognized by
make_helpers/tbbr/tbbr_tools.mk, and the cert_create tool generates
the corresponding key and content certificates.
On the other hand, the top-level Makefile does not care SCP_BL2, so
the --scp-fw option is not passed to the fiptool. As far as I see
plat/arm/css/common/css_common.mk, it looks like a platform's job to
add $(eval $(call FIP_ADD_IMG,SCP_BL2,--scp-fw)).
We can make the top-level Makefile kind enough to take care of it.
This is useful when we want to have optional SCP_BL2 firmware.
Adjust css_common.mk so that Juno still requires SCP_BL2 by default.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The rockchip_pd_pwr_down_wfi function is currently unused, which may
trigger compiler warnings or errors. Remove it.
Change-Id: I7e1b0ae092e8855528ac2065ecefc8bd45305f31
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Some header files using the ULL() macro were not directly including
utils.h where the macro definition resides. As a consequence, a linker
script with values using this macro did not see the macro definition
and kept the "ULL(<value>)" call in the preprocessed file, which lead to
link error.
Files using ULL() macro now include utils.h directly.
Change-Id: I433a7f36bd21a156c20e69bc2a2bb406140ebdf9
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
This function fills the buffer (first argument) with the specified
number of bytes (second argument) from the trusted entropy source.
This function will be used to initialize the stack protector canary.
Change-Id: Iff15aaf4778c13fa883ecb5528fcf9b8479d4489
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
Introduce new build option ENABLE_STACK_PROTECTOR. It enables
compilation of all BL images with one of the GCC -fstack-protector-*
options.
A new platform function plat_get_stack_protector_canary() is introduced.
It returns a value that is used to initialize the canary for stack
corruption detection. Returning a random value will prevent an attacker
from predicting the value and greatly increase the effectiveness of the
protection.
A message is printed at the ERROR level when a stack corruption is
detected.
To be effective, the global data must be stored at an address
lower than the base of the stacks. Failure to do so would allow an
attacker to overwrite the canary as part of an attack which would void
the protection.
FVP implementation of plat_get_stack_protector_canary is weak as
there is no real source of entropy on the FVP. It therefore relies on a
timer's value, which could be predictable.
Change-Id: Icaaee96392733b721fa7c86a81d03660d3c1bc06
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
This API makes sure that all the characters sent to the crash console
are output before returning from it.
Porting guide updated.
Change-Id: I1785f970a40f6aacfbe592b6a911b1f249bb2735
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
It is needed to add placeholders for this function because, as this is
not a `plat_xxx()` function, there aren't weak definitions of it in any
file.
If `console_flush()` is used and there isn't an implementation of
`console_core_flush()` in any file, the compilation will fail.
Change-Id: I50eb56d085c4c9fbc85d40c343e86af6412f3020
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This patch switches to the functions which identify the underlying
platform in order to calculate the chip SKU.
Change-Id: I20cf5623465289ccfab28d6578efcf762bfeb456
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch runs the MCE firmware's version check only if the underlying
platform has the capability to the run the firmware. MCE firmware is not
running on simulation platforms, identified by v0.3 or v0.6, read from the
Tegra Chip ID value.
Change-Id: I3b1788b1ee2a0d4464017bb879ac5792cb7022b8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch uses helper functions to read the chips's major and minor
version values.
Change-Id: I5b2530a31af5ab3778a8aa63380def4e9f9ee6ec
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds all the UART controllers to the memory map.
Change-Id: I035e55ca7bff0a96115102f2295981f9e3a5da6b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Commit f3d3b316f8 replaced
plat_get_syscnt_freq by plat_get_syscnt_freq2 on all the
upstream platforms. This patch modifies the Tegra186 code
which is not present usptream, yet.
Change-Id: Ieda6168050a7769680a3a94513637fed03463a2d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch disables TCU prefetch for all the contexts in order
to improve SMMU performance.
Change-Id: I82ca49a0e396d9f064f5c62a5f00c4b2101d8459
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch overrides the default handlers to get BL31 arguments from the
previous bootloader. The previous bootloader stores the pointer to the
arguments in PMC secure scratch register #53.
BL31 is the first component running on the CPU, as there isn't a previous
bootloader. We set the RESET_TO_BL31 flag to enable the path which assumes
that there are no input parameters passed by the previous bootloader.
Change-Id: Idacc1df292a70c9c1cb4d5c3a774bd796175d5e8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch removes duplicate code from the platform's SiP handler
routine for processing Video Memory Carveout region requests and
uses the common SiP handler instead.
Change-Id: Ib307de017fd88d5ed3c816288327cae750a67806
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables the configuration settings for the TZRAM
aperture by programming the base/size of the aperture and
restricting access to it. We allow only the CPU to read/write
by programming the access configuration registers to 0.
Change-Id: Ie16ad29f4c5ec7aafa972b0a0230b4790ad5619e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Commit c073fda1c6 upstream changed the
return type for `plat_get_syscnt_freq()` from uint64_t to unsigned
long long.
This patch modifies the return type for the Tegra186 platform.
Change-Id: Ic9e5c364b90972265576e271582a4347e5eaa6eb
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables ECC and Parity Protection for Cortex-A57 CPUs during boot,
for Tegra186 A02p SKUs.
Change-Id: I8522a6cb61f5e4fa9e0471f558a0c3ee8078370e
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Uncore perfmon appears to the CPU as a set of uncore perfmon registers
which can be read and written using the ARI interface. The MCE code
sequence handles reads and writes to these registers by manipulating
the underlying T186 uncore hardware.
To access an uncore perfmon register, CPU software writes the ARI
request registers to specify
* whether the operation is a read or a write,
* which uncore perfmon register to access,
* the uncore perfmon unit, group, and counter number (if necessary),
* the data to write (if the operation is a write).
It then initiates an ARI request to run the uncore perfmon sequence in
the MCE and reads the resulting value of the uncore perfmon register
and any status information from the ARI response registers.
The NS world's MCE driver issues MCE_CMD_UNCORE_PERFMON_REQ command
for the EL3 layer to start the entire sequence. Once the request
completes, the NS world would receive the command status in the X0
register and the command data in the X1 register.
Change-Id: I20bf2eca2385f7c8baa81e9445617ae711ecceea
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch implements the `get_target_pwr_state` handler for Tegra186
SoCs. The SoC port uses this handler to find out the cluster/system
state during CPU_SUSPEND, CPU_OFF and SYSTEM_SUSPEND calls.
The MCE firmware controls the power state of the CPU/CLuster/System,
so we query it to get the state and act accordingly.
Change-Id: I86633d8d79aec7dcb405d2301ac69910f93110fe
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds a helper function to the MCE driver to allow its
clients to issue UPDATE_CSTATE_INFO requests, without having to
setup the CPU context struct.
We introduced a struct to encapsulate the request parameters, that
clients can pass on to the MCE driver. The MCE driver gets the
parameters from the struct and programs the hardware accordingly.
Change-Id: I02bce57506c4ccd90da82127805d6b564375cbf1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Juno platform Makefile is responsible for enabling all the relevant
errata. As the Juno platform port does not know which revision of Juno
the TF
is compiled for, the revision of the cores are unknown and so all errata
up to this date are needed on at least one revision of Juno.
Change-Id: I38e1d6efc17e703f2bd55e0714f8d8fa4778f696
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
This patch resets the CPU power state info when we online any CPU. The
NS world software would re-init the CPU power state after the CPU gets
online anyways. This allows us to maintain proper CPU/cluster power
states in the MCE firmware at all times.
Change-Id: Ib24054f53df720a4f88d67b2cb5a2e036e475e14
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the "Recursion in included headers" error flagged by
Coverity.
Fixes coverity errors "31858: Recursion in included headers" and
"31857: Recursion in included headers"
Change-Id: Icf8838434b1808b396e743e47f59adc452546364
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the logic to calculate the higher bits for TZRAM's base/end
addresses.
Fixes coverity error "31853: Wrong operator used (CONSTANT_EXPRESSION_RESULT)"
Change-Id: Iff62ef18cba59cd41ad63a5c71664872728356a8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch modifies some of the functions in ARM platform layer to cater
for the case when multi-threading `MT` is set in MPIDR. A new build flag
`ARM_PLAT_MT` is added, and when enabled, the functions accessing MPIDR
now assume that the `MT` bit is set for the platform and access the bit
fields accordingly.
Also, a new API plat_arm_get_cpu_pe_count is added when `ARM_PLAT_MT` is
enabled, returning the PE count within the physical cpu corresponding to
`mpidr`.
Change-Id: I04ccf212ac3054a60882761f4087bae299af13cb
Signed-off-by: Summer Qin <summer.qin@arm.com>
This patch fixes the programming logic for the Video memory carveout's
size. The Memory Controller expects the size in terms of MBs instead
of bytes.
Change-Id: Ia8261b737448bae9a435fe21ab336126785d4279
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch removes stream ID override for the Security Engine
hardware block as its stream ID is programmed by the NS world
driver.
Original change by Mallikarjun Kasoju <mkasoju@nvidia.com>
Change-Id: Ia6523c1a1bb0a82bdeb878feb55670813899bdac
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch resets the power state info for CPUs when onlining,
as we set deepest power when offlining a core but that may not
be requested by non-secure sw which controls idle states. It
will re-init this info from non-secure software when the core
come online.
Original change by Prashant Gaikwad <pgaikwad@nvidia.com>
Change-Id: Id6c2fa2b821c7705aafbb561a62348c36fd3abd8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The Tegra simulation environment has limited capabilities. This patch
checks the chip's major and minor versions to decide the features to
enable/disable - MCE firmware version checking is disabled and limited
Memory Controller settings are enabled
Change-Id: I258a807cc3b83cdff14a9975b4ab4f9d1a9d7dcf
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch checks that the system is running with the supported MCE
firmware during boot. In case the firmware version does not match the
interface header version, then the system halts.
Change-Id: Ib82013fd1c1668efd6f0e4f36cd3662d339ac076
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the programming sequence for 'System Suspend' and
'Quasi power down' state entry. The device needs to update the
required power state before querying the MCE firmware to see the
entry to that power state is allowed.
Original change by Allen Yu <alleny@nvidia.com>
Change-Id: I65e03754322188af913fabf41f29d1c3595afd85
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch programs the default CPU wake mask during CPU_SUSPEND. This
reduces the CPU_SUSPEND latency as the system has to send one less SMC
before issuing the actual suspend request.
Original change by Krishna Sitaraman <ksitaraman@nvidia.com>
Change-Id: I1f9351dde4ab30936070e9f42c2882fa691cbe46
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch clears the system cstate when offlining a CPU core as we
need to update the sytem cstate to SC7 only when we enter system
suspend.
Original change by Prashant Gaikwad <pgaikwad@nvidia.com>
Change-Id: I1cff9bbab4db7d390a491c8939aea5db6c6b5c59
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables overrides for APE domains to allow the chip verification
software harness (MODS) to execute its test cases.
Original change by Harvey Hsieh <hhsieh@nvidia.com>
Change-Id: I09b22376068c5b65d89c2a53154ccb2c60d955bd
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds a new interface to allow for making an ARI call that
will enable LATIC for the chip verification software harness.
LATIC allows some MINI ISMs to be read in the CCPLEX. The ISMs are
used for various measurements relevant ot particular locations in
Silicon. They are small counters which can be polled to determine
how fast a particular location in the Silicon is.
Original change by Guy Sotomayor <gsotomayor@nvidia.com>
Change-Id: Ifb49b8863a009d4cdd5d1ba38a23b5374500a4b3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support to save the BL31 state to the TZDRAM
before entering system suspend. The TZRAM loses state during
system suspend and so we need to copy the entire BL31 code to
TZDRAM before entering the state.
In order to restore the state on exiting system suspend, a new
CPU reset handler is implemented which gets copied to TZDRAM
during boot. TO keep things simple we use this same reset handler
for booting secondary CPUs too.
Change-Id: I770f799c255d22279b5cdb9b4d587d3a4c54fad7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch reprograms MSS to make ROC deal with ordering of
MC traffic after boot and system suspend exit. This is needed
as device boots with MSS having all control but POR wants ROC
to deal with the ordering. Performance is expected to improve
with ROC but since no one has really tested the performance,
keep the option configurable for now by introducing a platform
level makefile variable.
Change-Id: I2e782fea138ccf9d281eb043a6b2c3bb97c839a7
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds the chip level support for System Suspend entry
and exit. As part of the entry sequence we first query the MCE
firmware to check if it is safe to enter system suspend. Once
we get a green light, we save hardware block settings and enter
the power state. As expected, all the hardware settings are
restored once we exit the power state.
Change-Id: I6d192d7568d6a555eb10efdfd45f6d79c20f74ea
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The memory controller loses its settings when the device enters system
suspend state.
This patch adds a handler to restore the Video Memory settings in the
memory controller, which would be called after exiting the system suspend
state.
Change-Id: I1ac12426d7290ac1452983d3c9e05fabbf3327fa
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds a device driver for the SMMU hardware block on
Tegra186 SoCs. We use the generic ARM SMMU-500 IP block on
Tegra186. The driver only supports saving the SMMU settings
before entering system suspend. The MC driver and the NS world
clients take care of programming their own settings.
Change-Id: Iab5a90310ee10f6bc8745451ce50952ab3de7188
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Replace the occurrences of signed condition codes where it was
unnecessary by an unsigned test as the unsigned tests allow the full
range of unsigned values to be used without inverting the result with
some large operands.
This reverts commit ee2c909947e0a9c4a2562689a7bfc863bc4794f9.
Change-Id: Ibaa5e8dfae6ad65bada3cda5f683d181fee37e53
Acked-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
This patch adds support for the SC8 system power off state. This
state keeps the sensor subsystem powered ON while powering down
the remaining parts of the SoC. The CPUs and DRAM are powered down
as part of this state entry and perform a cold boot when exiting SC8.
Change-Id: Iba65c661a7fe077a0d696f114bab3b4595e19a0d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch disables the DCO operations when we turn OFF a
CPU. DCO operations are still ON when a CPU enters a power
down suspend state.
Change-Id: I954a800209ffcc9ab43a77f04040608cbbbd9055
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch registers all the FIQ interrupt sources during platform
setup. Currently we support AON and TOP watchdog timer interrupts.
Change-Id: Ibccd866f00d6b08b574f765538525f95b49c5549
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
For all APE clients (APER, APEW, APEDMAR, APEDMAW) set NO_OVERRIDE
for MC_SID_CFG as ACAST/ADAST will be setup with the required SIDs
ie. 0x7F & 0x1E.
Original change by Nitin Kumbhar <nkumbhar@nvidia.com>
Change-Id: Idec981b3537cc95dac6ec37cdaa38bc45b16d232
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch sets the Memory Controller's TXN_OVERRIDE registers
for most write clients to CGID_ADR. This ensures ordering is maintained.
In some cases WAW ordering problems could occur. There are different
settings for Tegra version A01 v A02.
Original changes by Alex Waterman <alexw@nvidia.com>
Change-Id: I82ea02afa43a24250ed56985757b83e78e71178c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The GPU is the real consumer of the video protected memory region
and it needs to be in reset to pick up the new region.
This patch checks if the GPU is in reset before we program the new
video protected memory region settings.
Change-Id: I44f553bfcf07b1975abad53b245954be966c8aeb
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the incorrect override settings for the SCE
hardware block.
Original change by Pekka Pessi <ppessi@nvidia.com>
Change-Id: I33db55d6004331988b52ca70157aab1409f4829f
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the logic used to calculate the CPU index for
storing the per-cpu wake times. We use the MIDR register to
calculate the CPU index now. This allows us to store values for
Denver/A57 CPUs properly.
Change-Id: I9df0377afd4b92bbdaea495c0df06a9780a99d09
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch supports the TEGRA_SIP_NEW_VIDEOMEM_REGION SiP call to
program new video memory carveout settings from the NS world.
Change-Id: If9ed818fe71e6cb7461f225090105a4d8883b7a2
Signed-off-by: Wayne Lin <wlin@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support for the C6 and C7 CPU_SUSPEND states. C6 is
an idle state while C7 is a powerdown state.
The MCE block takes care of the entry/exit to/from these core power
states and hence we call the corresponding MCE handler to process
these requests. The NS driver passes the tentative time that the
core is expected to stay in this state as part of the power_state
parameter, which we store in a per-cpu array and pass it to the
MCE block.
Change-Id: I152acb11ab93d91fb866da2129b1795843dfa39b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch programs the Memory controller's control registers
to disable non-secure accesses to the TZRAM. In case these
registers are already programmed by the BL2/BL30, then the
driver just bails out.
Change-Id: Ia1416988050e3d067296373060c717a260499122
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support for the newer platform handler functions. Commit
I6db74b020b141048b6b8c03e1bef7ed8f72fd75b merges the upstream code which
has already moved all the upstream supported platforms over to these
handler functions.
Change-Id: I621eff038f3c0dc1b90793edcd4dd7c71b196045
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch implements the 'prepare_system_reset' handler to
issue the 'system reset' command to the MCE.
Change-Id: I83d8d0b4167aac5963d640fe77d5754dc7ef05b1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch implements the CPU_OFF handler for powering down
a CPU using the MCE driver.
Change-Id: I8d455005d0b547cc61cc7778bfe9eb84b7e5480c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The System Counter Frequency has been updated to 31.25MHz after
some experiments as the previous value was too high.
Change-Id: I79986ee1c0c88700a3a2b1dbff2d3f00c0c412b9
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Tegra186 has an on-die, 320KB, "System RAM" memory. Out of the total
size, 256KB are allocated for the CPU TrustZone binaries - EL3 monitor
and Trusted OS.
This patch changes the base address for bl31.bin to the SysRAM base
address. The carveout is too small for the Trusted OS, so we relocate
only the monitor binary.
Change-Id: Ib4b667ff2a7a619589851338f9d0bfb02078c575
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch issues the 'System Off' ARI to power off the entire
system from the 'prepare_system_off' handler.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch add code to power on/off the secondary CPUs on the Tegra186
chip. The MCE block is the actual hardware that takes care of the
power on/off sequence. We pass the constructed CPU #, depending on the
MIDR_IMPL field, to the MCE CPU handlers.
This patch also programs the reset vector addresses to allow the
CPUs to power on through the monitor and then jump to the linux
world.
Change-Id: Idc164586cda91c2009d66f3e09bf4464de9662db
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds the new SiP SMC calls to allow the NS world to
interact with the MCE hardware block on Tegra186 chips.
Change-Id: I79c6b9f76d68a87abd57a940613ec070562d2eac
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The CPU Complex (CCPLEX) Power Manager (Denver MCE, or DMCE) is an
offload engine for BPMP to do voltage related sequencing and for
hardware requests to be handled in a better latency than BPMP-firmware.
There are two interfaces to the MCEs - Abstract Request Interface (ARI)
and the traditional NVGINDEX/NVGDATA interface.
MCE supports various commands which can be used by CPUs - ARM as well
as Denver, for power management and reset functionality. Since the
linux kernel is the master for all these scenarios, each MCE command
can be issued by a corresponding SMC. These SMCs have been moved to
SiP SMC space as they are specific to the Tegra186 SoC.
Change-Id: I67bee83d2289a8ab63bc5556e5744e5043803e51
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Tegra186 is the newest SoC in the Tegra family which consists
of two CPU clusters - Denver and A57. The Denver cluster hosts
two next gen Denver15 CPUs while the A57 cluster hosts four ARM
Cortex-A57 CPUs. Unlike previous Tegra generations, all the six
cores on this SoC would be available to the system at the same
time and individual clusters can be powered down to conserve
power.
Change-Id: Id0c9919dbf5186d2938603e0b11e821b5892985e
Signed-off-by: Wayne Lin <wlin@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds driver for the Memory Controller (v2) in the newer
Tegra SoCs. The newer hardware uses ARM's SMMU hardware instead of
the proprietary block in the past.
Change-Id: I78359da780dc840213b6e99954e45e34428d4fff
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch opens up the interfaces to read the chip's major/minor versions
for all Tegra drivers to use.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
These source file definitions should be defined in generic
Makefiles so that all platforms can benefit. Ensure that the
symbols are properly marked as weak so they can be overridden
by platforms.
NOTE: This change is a potential compatibility break for
non-upstream platforms.
Change-Id: I7b892efa9f2d6d216931360dc6c436e1d10cffed
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
The NVidia Tegra 210 SoC contains Cortex-A53 CPUs which are affected by
erratum 855873.
Enable the workaround that TF provides to fix this erratum.
Change-Id: I6cef4ac60ae745e9ce299ee22c93b9d2c4f6c5f2
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The Mediatek 8173 SoC contains Cortex-A53 CPUs which are affected by
erratum 855873.
Enable the workaround that TF provides to fix this erratum.
Change-Id: I6e1c7822c320d81bdd46b8942d1d755883dac1f5
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
ARM erratum 855873 applies to all Cortex-A53 CPUs.
The recommended workaround is to promote "data cache clean"
instructions to "data cache clean and invalidate" instructions.
For core revisions of r0p3 and later this can be done by setting a bit
in the CPUACTLR_EL1 register, so that hardware takes care of the promotion.
As CPUACTLR_EL1 is both IMPLEMENTATION DEFINED and can be trapped to EL3,
we set the bit in firmware.
Also we dump this register upon crashing to provide more debug
information.
Enable the workaround for the Juno boards.
Change-Id: I3840114291958a406574ab6c49b01a9d9847fec8
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Modify ARM common makefile to use version 2 of the translation tables
library and include the new header in C files.
Simplify header dependencies related to this library to simplify the
change.
The following table contains information about the size increase in
bytes for BL1 after applying this patch. The code has been compiled for
different configurations of FVP in AArch64 mode with compiler GCC 4.9.3
20150413. The sizes have been calculated with the output of `nm` by
adding the size of all regions and comparing the total size before and
after the change. They are sumarized in the table below:
text bss data total
Release +660 -20 +88 +728
Debug +740 -20 +242 +962
Debug (LOG_LEVEL=50) +1120 -20 +317 +1417
Change-Id: I539e307f158ab71e3a8b771640001fc1bf431b29
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
TLBI instructions for EL3 won't have the desired effect under specific
circumstances in Cortex-A57 r0p0. The workaround is to execute DSB and
TLBI twice each time.
Even though this errata is only needed in r0p0, the current errata
framework is not prepared to apply run-time workarounds. The current one
is always applied if compiled in, regardless of the CPU or its revision.
This errata has been enabled for Juno.
The `DSB` instruction used when initializing the translation tables has
been changed to `DSB ISH` as an optimization and to be consistent with
the barriers used for the workaround.
Change-Id: Ifc1d70b79cb5e0d87e90d88d376a59385667d338
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The files affected by this patch don't really depend on `xlat_tables.h`.
By changing the included file it becomes easier to switch between the
two versions of the translation tables library.
Change-Id: Idae9171c490e0865cb55883b19eaf942457c4ccc
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This patch enables the SEPARATE_CODE_AND_RODATA build flag for all
Tegra platforms, to allow setting proper MMU attributes for the RO
data and the code.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The linux kernel v3.10 does not use System Suspend function ID, whereas
v4.4 uses it. This means affinity levels 0/1 will have different state id
values during System Suspend entry. This patch updates the assert criteria
to check both the state id values.
Change-Id: I07fcaf99501cc9622e40d0a2c1eb4a4a160be10a
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch allows the NS world to pass 64-bit base address for
the Video Memory carveout region.
Change-Id: I7e47cc1f5425bd39c6763755b801517013e1e0cd
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch increases the ADDR_SPACE_SIZE macro (virtual address)
to 35 bits, to support max memory of 32G, for all Tegra platforms.
Change-Id: I8e6861601d3a667d7428988c7596b0adebfa0548
Signed-off-by: Steven kao <skao@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Some platforms might want to keep the uart console disabled
during boot. This patch checks if the platform supports a
console, before calling console_init().
Change-Id: Icc9c59cb979d91fd0a72e4732403b3284bdd2dfc
Signed-off-by: Damon Duan <danield@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch modifies the TZDRAM base address to the new aperture
allocated by the bootloader.
Change-Id: Id158d15b1ec9aa681136d258e90fbba930aebf92
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch sets the core power state during cluster power down,
so that the 'get_target_pwr_state' handler can calculate the
proper states for all the affinity levels.
Change-Id: If4adb001011208916427ee1623c6c923bed99985
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch fixes the 'tegra_soc_get_target_pwr_state' handler used to
calculate the proper state for each of the affinity levels.
Change-Id: Id16bd15b96f0fc633ffeac2d7a390592fbd0454b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch removes the console_init() from runtime_setup() as we already
initialize it earlier and disables/enables it across "System Suspend".
Change-Id: I992d3ca56ff4797faf83e8d7fa52c0ef3e1c3367
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support to identify the underlying platform
on which we are running. The currently supported platforms
are actual silicon and simulation platforms.
Change-Id: Iadf96e79ec663b3dbd1a18e9bb95ffcdb82fc8af
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch makes the default MP definitions of plat_get_my_stack()
and plat_set_my_stack() as weak so that they can be overridden by
the AArch32 Secure Payload if it requires.
Change-Id: I3b6ddff5750443a776505e3023ff2934227592b6
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Remove struct rockchip_pm_ops_cb and instead of using weak functions
implement; in this way we want the codes look clear and simple;
Change-Id: Ib9e8a5e932fdfc2b3e6a1ec502c40dfe720ac400
Signed-off-by: tony.xie <tony.xie@rock-chips.com>
This patch implements a per-soc handler to calculate the target
power state for the cluster/system. A weak implementation of the
handler is provided for platforms to use by default.
For SoCs with multiple CPU clusters, this handler would provide
the individual cluster/system state, allowing the PSCI service to
flush caches during cluster/system power down.
Change-Id: I568cdb42204f9841a8430bd9105bd694f71cf91d
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support to relocate the BL32 image from the NS
memory to TZDRAM during cold boot. The NS memory buffer is
cleared out after the process completes.
Change-Id: I1a033ffe73b8c309449f874d5187708d0a8846d2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch implements handlers which platforms can override to
get the BL31 arguments passed by the previous bootloader.
Change-Id: I6b9628a984644ce1b5de5aa6d7cd890e57241d89
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch returns pointer to the BL32 entrypoint info only if
it is valid.
Change-Id: I71ce3c4626681753c94f3a7bbaa50c26c74874cb
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch configures the TZDRAM fence during early platform
setup to allow the memory controller to enable DRAM encryption
before the TZDRAM actually gets used.
Change-Id: I0169ef9dda75699527b4e30c9e617a9036ba1d76
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch restores the TZRAM fence and the access permissions
on exiting the "System Suspend" state.
Change-Id: Ie313fca5a861c73f80df9639b01115780fb6e217
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables L2 ECC and Parity Protection for ARM Cortex-A57 CPUs
for Tegra SoCs.
Change-Id: I038fcd529991d0201a4951ce2730ab71b1c980f9
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch modifies the secure IRQ registration process to allow platforms
to specify the target CPUs as well as the owner of the IRQ. IRQs "owned"
by the EL3 would return INTR_TYPE_EL3 whereas those owned by the Trusted
OS would return INTR_TYPE_S_EL1 as a result.
Change-Id: I528f7c8220d0ae0c0f354e78d69e188abb666ef6
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds a handler for FIQ interrupts triggered when
the CPU is in the NS world. The handler stores the NS world's
context along with ELR_EL3/SPSR_EL3.
The NS world driver issues an SMC initially to register it's
handler. The monitor firmware stores this handler address and
jumps to it when the FIQ interrupt fires. Upon entry into the
NS world the driver then issues another SMC to get the CPU
context when the FIQ fired. This allows the NS world driver to
determine the CPU state and call stack when the interrupt
fired. Generally, systems register watchdog interrupts as FIQs
which are then used to get the CPU state during hangs/crashes.
Change-Id: I733af61a08d1318c75acedbe9569a758744edd0c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Tegra chips support multiple FIQ interrupt sources. These interrupts
are enabled in the GICD/GICC interfaces by the tegra_gic driver. A
new FIQ handler would be added in a subsequent change which can be
registered by the platform code.
This patch adds the GIC programming as part of the tegra_gic_setup()
which now takes an array of all the FIQ interrupts to be enabled for
the platform. The Tegra132 and Tegra210 platforms right now do not
register for any FIQ interrupts themselves, but will definitely use
this support in the future.
Change-Id: I0ea164be901cd6681167028fea0567399f18d4b8
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds a platform handler to calculate the proper target power
level at the specified affinity level.
Tegra platforms assign a local state value in order of decreasing depth
of the power state i.e. for two power states X & Y, if X < Y then X
represents a shallower power state than Y. As a result, the coordinated
target local power state for a power domain will be the maximum of the
requested local power state values.
Change-Id: I67360684b7f5b783fcfdd605b96da5375fa05417
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch includes platform_def.h required to access UART macros -
"TEGRA_BOOT_UART_CLK_IN_HZ" and "TEGRA_CONSOLE_BAUDRATE" from
tegra_helpers.S.
Change-Id: Ieb63968a48dc299d03e81ddeb1ccc871cf3397a1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch removes the restriction of allowing SiP calls only from the
non-secure world. The secure world can issue SiP calls as a result of
this patch now.
Change-Id: Idd64e893ae8e114bba0196872d3ec544cac150bf
Signed-off-by: Wayne Lin <wlin@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds a weak handler for early platform setup which
can be overriden by the soc-specific handlers to perform any
early setup tasks.
Change-Id: I1a7a98d59b2332a3030c6dca5a9b7be977177326
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch adds support to relocate BL3-1 code to BL31_BASE in case
we cold boot to a different address. This is particularly useful to
maintain compatibility with legacy BL2 code.
This patch also checks to see if the image base address matches either
the TZDRAM or TZSRAM base.
Change-Id: I72c96d7f89076701a6ac2537d4c06565c54dab9c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This change disables the cache non-temporal hints for A57 and
A53 CPUs on Tegra.
Change-Id: I279d95aec5afbc3ca3cc4b34aa16de3f2c83a4fc
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Sorry to miss the security configuration for SRAM, if we don't support
it, somebody may modify the comment of SRAM in the non-secure space.
Let's fix this issue.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
The F1 CAS latency setting was not bit shifted, which resulted in
setting the DRAM additive latency value instead.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Roberto Vargas
danh-arm
Tao Wang
Fu Wei
Julius Werner
Summer Qin
Jeenu Viswambharan
davidcunado-arm
Varun Wadekar
Fu Wei
Sandrine Bailleux
Leo Yan
Soby Mathew
Jorge Ramirez-Ortiz
Isla Mitchell
Victor Chong
Haojian Zhuang
Ziyuan Xu
Soren Brinkmann
Caesar Wang
Dimitris Papastamos
Douglas Raillard
Masahiro Yamada
jagadeesh ujja
Anthony Zhou
Lin Huang
Derek Basehore
Vincent Guittot
David Wang
Antonio Nino Diaz
Yatharth Kochar
tony.xie
Steven Kao
Scott Branden
Scott Branden
Vignesh Radhakrishnan
Pritesh Raithatha
Stephen Warren
Harvey Hsieh
Rich Wiley
Mustafa Yigit Bilgen
Vivek Aseeja
Krishna Sitaraman
Paul Kocialkowski
Andre Przywara
Damon Duan
Wayne Lin
Xing Zheng